Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
61
Installation and Upgrades / Re: zentyal.me does not work for me
« on: December 05, 2011, 09:54:31 am »
Then, run the following command and let me know what /var/log/daemon.log says:
Make sure the Zentyal Cloud is set as provider in [it]Network -> Dynamic DNS[/it].
Best regards,
Code: [Select]
$ sudo /etc/init.d/ddclient restart
Make sure the Zentyal Cloud is set as provider in [it]Network -> Dynamic DNS[/it].
Best regards,
62
Installation and Upgrades / Re: CPU Temperature monitor
« on: December 01, 2011, 05:07:49 pm »
Hi tkaisar,
Just for the record, zentyal-monitor only manages thermal plugin and not sensors plugin at the moment.
Glad to hear that now works for you.
Best regards,
Just for the record, zentyal-monitor only manages thermal plugin and not sensors plugin at the moment.
Glad to hear that now works for you.
Best regards,
63
Installation and Upgrades / Re: zentyal.me does not work for me
« on: December 01, 2011, 12:52:50 pm »
Hi yustao,
I encourage you not to open several posts about the same problem. There is a risk of being blocked or removed.
Regarding to your problem, please check Network --> DynDNS and the ddclient logs in /var/log/daemon.log to help you further. Make sure as well the server is connected to Zentyal Cloud. I double-check your server and I cannot see any update from your server.
Best regards,
I encourage you not to open several posts about the same problem. There is a risk of being blocked or removed.
Regarding to your problem, please check Network --> DynDNS and the ddclient logs in /var/log/daemon.log to help you further. Make sure as well the server is connected to Zentyal Cloud. I double-check your server and I cannot see any update from your server.
Best regards,
64
Installation and Upgrades / Re: Zentyal Cloud - Basic subscription problem.
« on: November 29, 2011, 10:39:49 am »
Hi Escorpiom,
We have detected a bug in the syntax when you're desuscribing your server. It is now fixed on trunk.
As I see, your server is now connected again.
Thanks again for your feedback here.
Best,
We have detected a bug in the syntax when you're desuscribing your server. It is now fixed on trunk.
As I see, your server is now connected again.
Thanks again for your feedback here.
Best,
65
Installation and Upgrades / Re: zentyal.me does not work for me
« on: November 28, 2011, 11:03:43 am »
There is no need to open a port.
66
Installation and Upgrades / Re: zentyal.me does not work for me
« on: November 27, 2011, 11:05:38 am »
Hi Yustao,
Check the logs for ddclient to update your address in Zentyal Cloud. To do so, check it out with the following command:
According to our records, no update has reached Zentyal Cloud.
Best regards,
Check the logs for ddclient to update your address in Zentyal Cloud. To do so, check it out with the following command:
Code: [Select]
$ sudo grep 'ddclient' /var/log/daemon.log
According to our records, no update has reached Zentyal Cloud.
Best regards,
67
Installation and Upgrades / Re: Disaster Recovery
« on: November 24, 2011, 01:24:04 pm »
Hi there,
We do have a service called Disaster Recovery to make a completely restore process seamlessly
. It will store your data in the cloud using ebackup module. With the support of Zentyal team available
Best regards,
[1] http://www.zentyal.com/en/services/addons/disaster-recovery/
We do have a service called Disaster Recovery to make a completely restore process seamlessly
. It will store your data in the cloud using ebackup module. With the support of Zentyal team available Best regards,
[1] http://www.zentyal.com/en/services/addons/disaster-recovery/
68
Installation and Upgrades / Re: CPU Temperature monitor
« on: November 24, 2011, 01:21:46 pm »
Hi Thorsten,
I'm afraid this a problem between your motherboard and the Linux Kernel. Nothing that Zentyal can do about it.
Good luck!
I'm afraid this a problem between your motherboard and the Linux Kernel. Nothing that Zentyal can do about it.
Good luck!
69
Installation and Upgrades / Re: CPU Temperature monitor
« on: November 19, 2011, 07:52:25 pm »
Hi thorsten,
As described here [1], the plugin thermal will collectd all devices for measuring its temperature if no device are defined. So the default configuration is correct. The CPU temperature is measured using the kernel feature in SysFS, or if it is not available the ProcFS system. Check the existence and the contents of /sys/class/thermal or the fallback /proc/acpi/thermal_zone to know if your kernel is able to collect the current CPU temperature.
Best regards,
[1] http://collectd.org/documentation/manpages/collectd.conf.5.shtml#plugin_thermal
As described here [1], the plugin thermal will collectd all devices for measuring its temperature if no device are defined. So the default configuration is correct. The CPU temperature is measured using the kernel feature in SysFS, or if it is not available the ProcFS system. Check the existence and the contents of /sys/class/thermal or the fallback /proc/acpi/thermal_zone to know if your kernel is able to collect the current CPU temperature.
Best regards,
[1] http://collectd.org/documentation/manpages/collectd.conf.5.shtml#plugin_thermal
70
Installation and Upgrades / Re: Network fail after enabling subscription
« on: November 17, 2011, 11:30:40 am »
Hi aranel,
I don't think this has nothing to do with the subscription. However, you may paste here the relevant lines of the log /var/log/zentyal/zentyal.log to see why the network module is failing to start.
Best regards,
I don't think this has nothing to do with the subscription. However, you may paste here the relevant lines of the log /var/log/zentyal/zentyal.log to see why the network module is failing to start.
Best regards,
71
Installation and Upgrades / Re: Server {s} not found via DNS server ns.cloud.zentyal.com,130.237.x.y,130.237.x.y
« on: November 15, 2011, 05:41:39 pm »
Hi Master,
If you want to have Zentyal Subscriptions, this is mandatory as a cloud client.
Best regards,
If you want to have Zentyal Subscriptions, this is mandatory as a cloud client.
Best regards,
72
Installation and Upgrades / Re: Server {s} not found via DNS server ns.cloud.zentyal.com,130.237.x.y,130.237.x.y
« on: November 14, 2011, 07:21:13 pm »
Hi master,
The only way to solve this problem is to manually edit your Redis configuration by running this command:
Then, go to the interface and save changes, if required.
Best regards,
The only way to solve this problem is to manually edit your Redis configuration by running this command:
Code: [Select]
$ sudo /usr/share/zentyal/redisvi
# Search for /ebox/state/remoteservices/subscribed key
# Edit value from '1' to '0'
# Finally save changes as a vi editor
Then, go to the interface and save changes, if required.
Best regards,
73
Installation and Upgrades / Re: Server {s} not found via DNS server ns.cloud.zentyal.com,130.237.x.y,130.237.x.y
« on: November 14, 2011, 12:20:45 pm »
Hi Emilio,
It seems like your server was in a unstable status because it says it is subscribed but you have no files...
Try to fix it by running the following command:
If that does not work for you, try to remove the package zentyal-remoteservices and install it again.
Best regards,
It seems like your server was in a unstable status because it says it is subscribed but you have no files...
Try to fix it by running the following command:
Code: [Select]
$ sudo /usr/share/zentyal-remoteservices/unsubscribe
If that does not work for you, try to remove the package zentyal-remoteservices and install it again.
Best regards,
74
Spanish / Re: Zentyal Cloud
« on: November 14, 2011, 12:17:49 pm »
Hola Jose,
Siento las molestias pero ya está up again. Tuvimos un problema con uno de nuestros servidores.
Un saludo.
Siento las molestias pero ya está up again. Tuvimos un problema con uno de nuestros servidores.
Un saludo.
75
Installation and Upgrades / Re: cloud.zentyal.com
« on: November 08, 2011, 10:00:25 am »
Great to hear that!