Zentyal Forum, Linux Small Business Server
Zentyal Server => Installation and Upgrades => Topic started by: elliotbeken on January 18, 2012, 05:34:13 pm
-
Hi all,
I have a zentyal firewall running 2.2 (64-bit) and i have been having some trouble with the HTTP proxy and the domain blocking rules.
Here is the network layout:
ADSL Router =eth0= Zentyal Firewall =eth1= Internal LAN
I have all the computers in the LAN set to access the web via the Firewall (10.0.0.1) and all works ok but if i add sites i want to block to the default filter they dont block the site by domain name it only works if i add the IP address..
What am i doing wrong ?
Thanks.
-
Hi elliotbeken,
I have the same setup as you had. But never experience your issue.
it looks like a DNS issue, but your LAN client are connected as usual right.
I put the blocked site without the ¨www.¨
or just uninstall the HTTP Proxy (Cache and Filter) module .. and then reinstall,
do copy the squid.conf under /etc/squid/, as preference also under stubs folder, and under /etc/zentyal/hooks/squid.xxxxx if you change/add manual you own setting.
Hope it helps
Khuwera
-
Thanks for the reply.
i have reinstalled the service and set it all back up fine.
the squid url block works fine from within the LAN so if i block elliotbeken.com = LAN PC - Zentyal(with block rule) - website
but if i access the squid externally so = remote site - zentyal (external) through http proxy filter - to website (elliotbeken.com)
it wont work while accessing the http proxy from a external location. (the proxy server from a external location works fine but it seems the block, filter does not apply to this traffic).
Thanks