Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
1
Installation and Upgrades / Trouble Saving Network Module
« on: December 07, 2012, 05:02:11 am »
Hello,
I've been using zentyal for a while now and things have been running well. Yesterday, I modified the PPPoE username and password (for my DSL) on one of my NICs that was configured as a PPPoE connection. The problem was that I got in a bit of a hurry and started moving around the web interface before it was done, and now I can't make any interface changes (change it back because it does not connect to my DSL provider). When I attempt to save the changes, it just sites with the progress bar at 9% say 'Saving Network Module' and does not progress. Could someone guild me through trouble shooting this? I've look at the logs in /var/log/zentyal but they don't give much more information than telling me the network module is having problems.
I'm using Core 3.0.3.
Thanks
I've been using zentyal for a while now and things have been running well. Yesterday, I modified the PPPoE username and password (for my DSL) on one of my NICs that was configured as a PPPoE connection. The problem was that I got in a bit of a hurry and started moving around the web interface before it was done, and now I can't make any interface changes (change it back because it does not connect to my DSL provider). When I attempt to save the changes, it just sites with the progress bar at 9% say 'Saving Network Module' and does not progress. Could someone guild me through trouble shooting this? I've look at the logs in /var/log/zentyal but they don't give much more information than telling me the network module is having problems.
I'm using Core 3.0.3.
Thanks
2
Installation and Upgrades / Cannot Send Email - timed out while receiving the initial server greeting
« on: October 20, 2012, 06:26:44 pm »
Good Morning,
What I'm posting I don't believe to be a problem with Zentyal, but who knows. I'm using the following Zentyal version.
Core version 3.0.3
System load 0.35, 0.19, 0.10
I have configured the mail module in Zentyal and can receive email fine, but receive the following when I attempt to send a message outside of my network, to gmail for example.
"conversation with outbound.mailhop.org[204.13.248.72] timed out while receiving the initial server greeting"
I am using Dyn.com. I am using a dynamic external IP, but that is being taken care of by Dyn DNS standard and also Dyn Standard SMTP. I have outbound.mailhop.org setup as the smarthost (dyn's email server) but I get the error seen above. I'm using port 10465 to authenticate with my username and password. If I set it up any other way I get authentication errors, so I think I have it setup correctly.
I have emailed Dyn support who said to post in their forum (sum support eh?). I intend to do so, though I though I'd post here to see if anyone might know if the problem has to do with other postfix settings that I could possibly modify. I have searched the internet and found various things to try, but non have worked.
http://www.linuxquestions.org/questions/linux-server-73/timed-out-while-receiving-the-initial-server-greeting-722722
Any help would be appreciated.
Thanks,
What I'm posting I don't believe to be a problem with Zentyal, but who knows. I'm using the following Zentyal version.
Core version 3.0.3
System load 0.35, 0.19, 0.10
I have configured the mail module in Zentyal and can receive email fine, but receive the following when I attempt to send a message outside of my network, to gmail for example.
"conversation with outbound.mailhop.org[204.13.248.72] timed out while receiving the initial server greeting"
I am using Dyn.com. I am using a dynamic external IP, but that is being taken care of by Dyn DNS standard and also Dyn Standard SMTP. I have outbound.mailhop.org setup as the smarthost (dyn's email server) but I get the error seen above. I'm using port 10465 to authenticate with my username and password. If I set it up any other way I get authentication errors, so I think I have it setup correctly.
I have emailed Dyn support who said to post in their forum (sum support eh?). I intend to do so, though I though I'd post here to see if anyone might know if the problem has to do with other postfix settings that I could possibly modify. I have searched the internet and found various things to try, but non have worked.
http://www.linuxquestions.org/questions/linux-server-73/timed-out-while-receiving-the-initial-server-greeting-722722
Any help would be appreciated.
Thanks,
3
Installation and Upgrades / [SOLVED] Thunderbird Email client configuration clarificaiton
« on: October 13, 2012, 05:34:39 pm »
Good Morning all,
I've setup the mail module and everything was working with roundcube till it stopped working after a reboot (I've posted for that in a different post) but in the meantime I've been trying to get Thunderbird to work internally with my email server but it's not working. I'm hoping someone might be able to clarify a few things for me.
When setting up a mail account in Thunderbird, it asks for a few things and I want to make sure I'm providing the proper information. I'll try to go through all the steps...
First: You are asked for the following...
Your Name : Firstname Lastname (not associated with authentication)
Email Address: firstnamelastname@example.com
Password: This is the password used to access the account via webmail which is also the user's LDAP credentials, Correct?
Second: The next page it tires to find the server info for you... but it's not working.. I select IMAP and then go into the manual config.
Incoming: IMAP , hostnameofmailserver.example.com , Port (depends on authentication method) , STARTTLS , Kerberos/GSSAPI
Outgoing: SMTP , hostnameofmailserver.example.com , Port (depends on authentication method) , STARTTLS , Normal Password
Username : So, is this just the email address again? (firstnamelastname@example.com) or is this the username I setup under users in the Zentyal interface?
Ultimately, I'm getting met with authentication errors when I try to test the connection. Any aid on selecting which SSL and Authentication method to use would be great. I don't think I should be using Kerberos unless i'm logged into a machine that is joined to the zentyal domain right?
I hope this is not too confusing.
Thanks in advance!
I've setup the mail module and everything was working with roundcube till it stopped working after a reboot (I've posted for that in a different post) but in the meantime I've been trying to get Thunderbird to work internally with my email server but it's not working. I'm hoping someone might be able to clarify a few things for me.
When setting up a mail account in Thunderbird, it asks for a few things and I want to make sure I'm providing the proper information. I'll try to go through all the steps...
First: You are asked for the following...
Your Name : Firstname Lastname (not associated with authentication)
Email Address: firstnamelastname@example.com
Password: This is the password used to access the account via webmail which is also the user's LDAP credentials, Correct?
Second: The next page it tires to find the server info for you... but it's not working.. I select IMAP and then go into the manual config.
Incoming: IMAP , hostnameofmailserver.example.com , Port (depends on authentication method) , STARTTLS , Kerberos/GSSAPI
Outgoing: SMTP , hostnameofmailserver.example.com , Port (depends on authentication method) , STARTTLS , Normal Password
Username : So, is this just the email address again? (firstnamelastname@example.com) or is this the username I setup under users in the Zentyal interface?
Ultimately, I'm getting met with authentication errors when I try to test the connection. Any aid on selecting which SSL and Authentication method to use would be great. I don't think I should be using Kerberos unless i'm logged into a machine that is joined to the zentyal domain right?
I hope this is not too confusing.
Thanks in advance!
Pages: [1]