Messages

16

Email and Groupware / Re: Outloook Anywhere -The name on the security certificate is invalid

« on: November 16, 2015, 09:36:29 pm »

Thank you for your reply.
what I would like to do is change the name on the certificate from "mydomain.co.uk" to mail.mydomain.co.uk as a cannot connect with SSL
I receive the following error when I run exchange connectivity wizard.

Testing the SSL certificate to make sure it's valid.
    The SSL certificate failed one or more certificate validation checks.
        Additional Details
    Elapsed Time: 487 ms.

        Test Steps
        The Microsoft Connectivity Analyzer is attempting to obtain the SSL certificate from remote server mail.mydomain.co.uk on port 443.
    The Microsoft Connectivity Analyzer successfully obtained the remote SSL certificate.
        Additional Details
    Remote Certificate Subject: CN=zentyal-domain.lan, O=mydomain, L=sUTTON COLDFIELD, S=Undefined, C=UK, Issuer: CN=mydomain Authority Certificate, O=mydomain, L=sUTTON COLDFIELD, S=Undefined, C=UK.
Elapsed Time: 466 ms.

    Validating the certificate name.
    Certificate name validation failed.
      Tell me more about this issue and how to resolve it

        Additional Details
    Host name mail.mydomain.co.uk doesn't match any name found on the server certificate CN=zentyal-domain.lan, O=mydomain, L=sUTTON COLDFIELD, S=Undefined, C=UK.
Elapsed Time: 0 ms.

17

Email and Groupware / Re: Outloook Anywhere -The name on the security certificate is invalid

« on: November 16, 2015, 11:01:15 am »

I have been unable to sort this out and cannot connect using ssl . I'm sure I'm missing something and there's a simple solution to this. Can anyone help please.

18

Installation and Upgrades / upgrade to 4.2 mail module not starting

« on: November 05, 2015, 06:36:41 pm »

i have upgraded to 4.2 and the mail module will not start.
when i reboot all modules are stopped i can restart DNS DHCP NCP and printer modules when i start mail module i recieve error-
Error restarting service Mail. See /var/log/zentyal/zentyal.log for more information.
I can start module from command line , dash board says they are  running but they dont work ,I can't send or recieve emails or connect to outlook on clients.
Below is a copy of zentyal.log
Thank you

root@server4:/home/doadmin# tail -f /var/log/zentyal/zentyal.log
2015/11/05 17:23:40 WARN> zentyal.psgi:43 main::__ANON__ - Use of uninitialized value $hostname in substitution (s///) at /usr/share/perl5/EBox/DHCP.pm line 1089.
2015/11/05 17:24:10 WARN> zentyal.psgi:43 main::__ANON__ - Odd number of elements in hash assignment at /usr/share/perl5/EBox/Dashboard/ModuleStatus.pm line 47.
2015/11/05 17:24:10 WARN> zentyal.psgi:43 main::__ANON__ - Odd number of elements in hash assignment at /usr/share/perl5/EBox/Dashboard/ModuleStatus.pm line 47.
2015/11/05 17:24:10 WARN> zentyal.psgi:43 main::__ANON__ - Odd number of elements in hash assignment at /usr/share/perl5/EBox/Dashboard/ModuleStatus.pm line 47.
2015/11/05 17:24:10 WARN> zentyal.psgi:43 main::__ANON__ - Odd number of elements in hash assignment at /usr/share/perl5/EBox/Dashboard/ModuleStatus.pm line 47.
2015/11/05 17:24:10 WARN> zentyal.psgi:43 main::__ANON__ - Odd number of elements in hash assignment at /usr/share/perl5/EBox/Dashboard/ModuleStatus.pm line 47.
2015/11/05 17:24:10 WARN> zentyal.psgi:43 main::__ANON__ - Odd number of elements in hash assignment at /usr/share/perl5/EBox/Dashboard/ModuleStatus.pm line 47, <GEN0> line 564.
2015/11/05 17:24:10 WARN> zentyal.psgi:43 main::__ANON__ - Use of uninitialized value in hash element at /usr/share/perl5/EBox/RemoteServices.pm line 1329.
2015/11/05 17:24:10 WARN> zentyal.psgi:43 main::__ANON__ - Use of uninitialized value $hostname in substitution (s///) at /usr/share/perl5/EBox/DHCP.pm line 1089.
2015/11/05 17:24:10 WARN> zentyal.psgi:43 main::__ANON__ - Use of uninitialized value $hostname in substitution (s///) at /usr/share/perl5/EBox/DHCP.pm line 1089.
2015/11/05 17:24:40 WARN> zentyal.psgi:43 main::__ANON__ - Odd number of elements in hash assignment at /usr/share/perl5/EBox/Dashboard/ModuleStatus.pm line 47.
2015/11/05 17:24:40 WARN> zentyal.psgi:43 main::__ANON__ - Odd number of elements in hash assignment at /usr/share/perl5/EBox/Dashboard/ModuleStatus.pm line 47.
2015/11/05 17:24:40 WARN> zentyal.psgi:43 main::__ANON__ - Odd number of elements in hash assignment at /usr/share/perl5/EBox/Dashboard/ModuleStatus.pm line 47.
2015/11/05 17:24:40 WARN> zentyal.psgi:43 main::__ANON__ - Odd number of elements in hash assignment at /usr/share/perl5/EBox/Dashboard/ModuleStatus.pm line 47.
2015/11/05 17:24:40 WARN> zentyal.psgi:43 main::__ANON__ - Odd number of elements in hash assignment at /usr/share/perl5/EBox/Dashboard/ModuleStatus.pm line 47.
2015/11/05 17:24:40 WARN> zentyal.psgi:43 main::__ANON__ - Odd number of elements in hash assignment at /usr/share/perl5/EBox/Dashboard/ModuleStatus.pm line 47, <GEN0> line 578.
2015/11/05 17:24:40 WARN> zentyal.psgi:43 main::__ANON__ - Use of uninitialized value in hash element at /usr/share/perl5/EBox/RemoteServices.pm line 1329.
2015/11/05 17:24:40 WARN> zentyal.psgi:43 main::__ANON__ - Use of uninitialized value $hostname in substitution (s///) at /usr/share/perl5/EBox/DHCP.pm line 1089.
2015/11/05 17:24:40 WARN> zentyal.psgi:43 main::__ANON__ - Use of uninitialized value $hostname in substitution (s///) at /usr/share/perl5/EBox/DHCP.pm line 1089.
2015/11/05 17:25:10 WARN> zentyal.psgi:43 main::__ANON__ - Odd number of elements in hash assignment at /usr/share/perl5/EBox/Dashboard/ModuleStatus.pm line 47.
2015/11/05 17:25:10 WARN> zentyal.psgi:43 main::__ANON__ - Odd number of elements in hash assignment at /usr/share/perl5/EBox/Dashboard/ModuleStatus.pm line 47.
2015/11/05 17:25:10 WARN> zentyal.psgi:43 main::__ANON__ - Odd number of elements in hash assignment at /usr/share/perl5/EBox/Dashboard/ModuleStatus.pm line 47.
2015/11/05 17:25:10 WARN> zentyal.psgi:43 main::__ANON__ - Odd number of elements in hash assignment at /usr/share/perl5/EBox/Dashboard/ModuleStatus.pm line 47.
2015/11/05 17:25:10 WARN> zentyal.psgi:43 main::__ANON__ - Odd number of elements in hash assignment at /usr/share/perl5/EBox/Dashboard/ModuleStatus.pm line 47.
2015/11/05 17:25:10 WARN> zentyal.psgi:43 main::__ANON__ - Odd number of elements in hash assignment at /usr/share/perl5/EBox/Dashboard/ModuleStatus.pm line 47, <GEN0> line 592.
2015/11/05 17:25:10 WARN> zentyal.psgi:43 main::__ANON__ - Use of uninitialized value in hash element at /usr/share/perl5/EBox/RemoteServices.pm line 1329.
2015/11/05 17:25:10 WARN> zentyal.psgi:43 main::__ANON__ - Use of uninitialized value $hostname in substitution (s///) at /usr/share/perl5/EBox/DHCP.pm line 1089.
2015/11/05 17:25:10 WARN> zentyal.psgi:43 main::__ANON__ - Use of uninitialized value $hostname in substitution (s///) at /usr/share/perl5/EBox/DHCP.pm line 1089.

19

Email and Groupware / Re: Outloook Anywhere -The name on the security certificate is invalid

« on: November 03, 2015, 04:10:32 pm »

Is there anyone who can help with this please .
I've issued a new certificate for mail."mydomain" . I still cannot connect to outlook anywhere ,when I run the exchange connectivity wizard I receive an error "Certificate name validation failed" listing the name on my authority certificate "mydomain" not mail."mydomain" .
How can I change this!

20

Email and Groupware / Re: Outloook Anywhere -The name on the security certificate is invalid

« on: October 31, 2015, 03:48:04 pm »

I have the same problem can anyone help with this please

21

Installation and Upgrades / Re: Outlook not connecting

« on: October 31, 2015, 12:17:22 am »

my problems seem to be because of a mismatch address .Is this because my ip address is not in the cert details.

22

Installation and Upgrades / Re: Fresh 4.1 install - neither mail/groupware nor openchange server install possibl

« on: October 23, 2015, 07:34:39 pm »

I carried out a new install yesterday and it all seems to be working correctly .
Thanks Zentyal  could you please comment on issues on forum so users know when there fixed

23

Installation and Upgrades / Re: Outlook not connecting

« on: October 23, 2015, 07:29:31 pm »

after installing latest updates local issues seam to be resolved .
I still not able to  connect outlook anywhere I've ran the exchange connectivity wizard (results posted below).
I cannot understand where the music vine details are coming from as this is not us?
can anyone help please.
Testing Outlook connectivity.
    The Outlook connectivity test failed.
        Additional Details
    Elapsed Time: 55011 ms.

        Test Steps
        The Microsoft Connectivity Analyzer is attempting to test Autodiscover for colin@mydomain.
    Autodiscover was tested successfully.
        Additional Details
    Elapsed Time: 54994 ms.

        Test Steps
        Attempting each method of contacting the Autodiscover service.
    The Autodiscover service was tested successfully.
        Additional Details
    Elapsed Time: 54988 ms.

        Test Steps
        Attempting to test potential Autodiscover URL https://mydomain:443/Autodiscover/Autodiscover.xml
    Testing of this potential Autodiscover URL failed.
        Additional Details
    Elapsed Time: 1421 ms.

        Test Steps
        Attempting to resolve the host name mydomain in DNS.
    The host name resolved successfully.
        Additional Details
    IP addresses returned: 91.197.229.113
Elapsed Time: 708 ms.

    Testing TCP port 443 on host mydomain to ensure it's listening and open.
    The port was opened successfully.
        Additional Details
    Elapsed Time: 175 ms.

    Testing the SSL certificate to make sure it's valid.
    The SSL certificate failed one or more certificate validation checks.
        Additional Details
    Elapsed Time: 529 ms.

        Test Steps
        The Microsoft Connectivity Analyzer is attempting to obtain the SSL certificate from remote server mydomain on port 443.
    The Microsoft Connectivity Analyzer successfully obtained the remote SSL certificate.
        Additional Details
    Remote Certificate Subject: CN=www.musicvine.net, OU=InstantSSL, O=Music Vine Limited, STREET=110 Main Road, STREET=Hundleby, L=Splisby, S=Lincolnshire, PostalCode=PE23 5LZ, C=GB, Issuer: CN=COMODO RSA Organization Validation Secure Server CA, O=COMODO CA Limited, L=Salford, S=Greater Manchester, C=GB.
Elapsed Time: 398 ms.

    Validating the certificate name.
    Certificate name validation failed.
      Tell me more about this issue and how to resolve it

        Additional Details
    Host name mydomain doesn't match any name found on the server certificate CN=www.musicvine.net, OU=InstantSSL, O=Music Vine Limited, STREET=110 Main Road, STREET=Hundleby, L=Splisby, S=Lincolnshire, PostalCode=PE23 5LZ, C=GB.
Elapsed Time: 73 ms.





    Attempting to test potential Autodiscover URL https://autodiscover.mydomain:443/Autodiscover/Autodiscover.xml
    Testing of this potential Autodiscover URL failed.
        Additional Details
    Elapsed Time: 21312 ms.

        Test Steps
        Attempting to resolve the host name autodiscover.mydomain in DNS.
    The host name resolved successfully.
        Additional Details
    IP addresses returned: myfixed-ip- address
Elapsed Time: 224 ms.

    Testing TCP port 443 on host autodiscover.mydomain to ensure it's listening and open.
    The specified port is either blocked, not listening, or not producing the expected response.
      Tell me more about this issue and how to resolve it

        Additional Details
    A network error occurred while communicating with the remote host.
Elapsed Time: 21088 ms.



    Attempting to contact the Autodiscover service using the HTTP redirect method.
    The attempt to contact Autodiscover using the HTTP Redirect method failed.
        Additional Details
    Elapsed Time: 21031 ms.

        Test Steps
        Attempting to resolve the host name autodiscover.mydomain in DNS.
    The host name resolved successfully.
        Additional Details
    IP addresses returned: myfixed-ip- address
Elapsed Time: 11 ms.

    Testing TCP port 80 on host autodiscover.mydomain to ensure it's listening and open.
    The specified port is either blocked, not listening, or not producing the expected response.
      Tell me more about this issue and how to resolve it

        Additional Details
    A network error occurred while communicating with the remote host.
Elapsed Time: 21016 ms.



    Attempting to contact the Autodiscover service using the DNS SRV redirect method.
    The Microsoft Connectivity Analyzer successfully contacted the Autodiscover service using the DNS SRV redirect method.
        Additional Details
    Elapsed Time: 11210 ms.

        Test Steps
        Attempting to locate SRV record _autodiscover._tcp.mydomain in DNS.
    The Autodiscover SRV record was successfully retrieved from DNS.
        Additional Details
    The Service Location (SRV) record lookup returned host cpanelemaildiscovery.cpanel.net.
Elapsed Time: 155 ms.

    Attempting to test potential Autodiscover URL https://cpanelemaildiscovery.cpanel.net:443/Autodiscover/Autodiscover.xml
    Testing of the Autodiscover URL was successful.
        Additional Details
    Elapsed Time: 11051 ms.

        Test Steps
        Attempting to resolve the host name cpanelemaildiscovery.cpanel.net in DNS.
    The host name resolved successfully.
        Additional Details
    IP addresses returned: 208.74.124.133, 208.74.125.50, 208.74.125.51, 208.74.124.130, 208.74.124.131
Elapsed Time: 119 ms.

    Testing TCP port 443 on host cpanelemaildiscovery.cpanel.net to ensure it's listening and open.
    The port was opened successfully.
        Additional Details
    Elapsed Time: 62 ms.

    Testing the SSL certificate to make sure it's valid.
    The certificate passed all validation requirements.
        Additional Details
    Elapsed Time: 225 ms.

        Test Steps
        The Microsoft Connectivity Analyzer is attempting to obtain the SSL certificate from remote server cpanelemaildiscovery.cpanel.net on port 443.
    The Microsoft Connectivity Analyzer successfully obtained the remote SSL certificate.
        Additional Details
    Remote Certificate Subject: CN=*.cpanel.net, OU=Domain Control Validated, Issuer: CN=Go Daddy Secure Certificate Authority - G2, OU=http://certs.godaddy.com/repository/, O="GoDaddy.com, Inc.", L=Scottsdale, S=Arizona, C=US.
Elapsed Time: 115 ms.

    Validating the certificate name.
    The certificate name was validated successfully.
        Additional Details
    The host name that was found, cpanelemaildiscovery.cpanel.net, is a wildcard certificate match for common name *.cpanel.net.
Elapsed Time: 0 ms.

    Certificate trust is being validated.
    The certificate is trusted and all certificates are present in the chain.
        Test Steps
        The Microsoft Connectivity Analyzer is attempting to build certificate chains for certificate CN=*.cpanel.net, OU=Domain Control Validated.
    One or more certificate chains were constructed successfully.
        Additional Details
    A total of 2 chains were built. The highest quality chain ends in root certificate OU=Go Daddy Class 2 Certification Authority, O="The Go Daddy Group, Inc.", C=US.
Elapsed Time: 33 ms.

    Analyzing the certificate chains for compatibility problems with versions of Windows.
    Potential compatibility problems were identified with some versions of Windows.
        Additional Details
    The Microsoft Connectivity Analyzer can only validate the certificate chain using the Root Certificate Update functionality from Windows Update. Your certificate may not be trusted on Windows if the "Update Root Certificates" feature isn't enabled.
Elapsed Time: 37 ms.



    Testing the certificate date to confirm the certificate is valid.
    Date validation passed. The certificate hasn't expired.
        Additional Details
    The certificate is valid. NotBefore = 4/29/2014 3:54:32 PM, NotAfter = 10/18/2016 5:19:12 AM
Elapsed Time: 4 ms.



    Checking the IIS configuration for client certificate authentication.
    Client certificate authentication wasn't detected.
        Additional Details
    Accept/Require Client Certificates isn't configured.
Elapsed Time: 163 ms.

    Attempting to send an Autodiscover POST request to potential Autodiscover URLs.
    The Microsoft Connectivity Analyzer successfully retrieved Autodiscover settings by sending an Autodiscover POST.
        Additional Details
    Elapsed Time: 10480 ms.

        Test Steps
        The Microsoft Connectivity Analyzer is attempting to retrieve an XML Autodiscover response from URL https://cpanelemaildiscovery.cpanel.net:443/Autodiscover/Autodiscover.xml for user colin@mydomain.
    The Autodiscover XML response was successfully retrieved.
        Additional Details
    Autodiscover Account Settings
XML response:
<?xml version="1.0"?>
<Autodiscover xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
<Response xmlns="http://schemas.microsoft.com/exchange/autodiscover/outlook/responseschema/2006a">
<User>
<DisplayName>colin@mydomain</DisplayName>
</User>
<Account>
<AccountType>email</AccountType>
<Action>settings</Action>
<Protocol>
<Type>IMAP</Type>
<Server>mail.mydomain</Server>
<Port>993</Port>
<DirectoryPort>0</DirectoryPort>
<ReferralPort>0</ReferralPort>
<SSL>on</SSL>
<DomainRequired>off</DomainRequired>
<SPA>off</SPA>
<AuthRequired>on</AuthRequired>
<LoginName>colin@mydomain</LoginName>
</Protocol>
<Protocol>
<Type>SMTP</Type>
<Server>mail.mydomain</Server>
<Port>465</Port>
<DirectoryPort>0</DirectoryPort>
<ReferralPort>0</ReferralPort>
<SSL>on</SSL>
<DomainRequired>off</DomainRequired>
<SPA>off</SPA>
<AuthRequired>on</AuthRequired>
<LoginName>colin@mydomain</LoginName>
</Protocol>
</Account>
</Response>
</Autodiscover>
HTTP Response Headers:
Vary: Accept-Encoding
Connection: close
Content-Length: 1069
Content-Type: text/xml
Date: Thu, 22 Oct 2015 17:01:59 GMT
Server: Apache
Elapsed Time: 10437 ms.











    Autodiscover settings for Outlook connectivity are being validated.
    The Microsoft Connectivity Analyzer wasn't able to validate Outlook Autodiscover settings.
        Additional Details
    No account settings were returned from the Autodiscover response.
Elapsed Time: 2 ms.






 



 

24

Installation and Upgrades / Re: Outlook not connecting

« on: October 17, 2015, 11:27:33 am »

I have the same problem!
I also receive error message Windows shell common Dii has stopped working .
Also if I run nslookup and ipconfig commands after I've tried to connect I receive as follows.
(Please note the first ipconfig command is before I've tried to connect outlook to mail server.)

C:\>ipconfig

Windows IP Configuration


Ethernet adapter Local Area Connection:

   Connection-specific DNS Suffix  . :
   Link-local IPv6 Address . . . . . : fe80::dc94:315:eaf9:dabe%11
   IPv4 Address. . . . . . . . . . . : 192.168.0.12
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 192.168.0.1

Tunnel adapter isatap.{1A6031D5-849B-40A2-8457-D6825C16C8E3}:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :

Tunnel adapter Local Area Connection* 11:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :

Tunnel adapter Teredo Tunneling Pseudo-Interface:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :

C:\>nslookup
Default Server:  server4.shaver-repairs.co.uk
Address:  192.168.0.1

> ipconfig
Server:  server4.shaver-repairs.co.uk
Address:  192.168.0.1

*** server4.shaver-repairs.co.uk can't find ipconfig: Non-existent domain
> nslookup
Server:  server4.shaver-repairs.co.uk
Address:  192.168.0.1

*** server4.shaver-repairs.co.uk can't find nslookup: Non-existent domain
>

Can someone please help.

25

Installation and Upgrades / Re: Can't receive mail

« on: October 08, 2015, 07:11:56 pm »

I've found the system logs.
this is a copy of the mail.log
ct  8 16:34:41 zentyal fetchmail[5741]: reading message xxx@popaddress.co.uk@pop.1and1.co.uk:1 of 1 (3305 octets) (log message incomplete) Oct  8 16:34:41 zentyal fetchmail[5741]: SMTP error: 451 4.6.0 Alias expansion error Oct  8 16:34:41 zentyal fetchmail[5741]:  not flushed Oct  8 16:34:41 zentyal postfix/smtpd[16756]: disconnect from localhost.localdomain[127.0.0.1] Oct  8 16:37:41 zentyal fetchmail[5741]: 1 message for xxx@popaddress.co.uk at pop.1and1.co.uk (3305 octets).
Oct  8 16:37:42 zentyal postfix/smtpd[18138]: connect from localhost.localdomain[127.0.0.1] Oct  8 16:37:42 zentyal postfix/smtpd[18138]: 38D512E01033: client=localhost.localdomain[127.0.0.1]
Oct  8 16:37:44 zentyal postfix/cleanup[18144]: warning: 38D512E01033: unreasonable virtual_alias_maps map nesting for xxx@mydomain.co.uk -- message not accepted, try again later Oct  8 16:37:44 zentyal fetchmail[5741]: reading message xxx@popaddress.co.uk@pop.1and1.co.uk:1 of 1 (3305 octets) (log message incomplete) Oct  8 16:37:44 zentyal fetchmail[5741]: SMTP error: 451 4.6.0 Alias expansion error Oct  8 16:37:44 zentyal fetchmail[5741]:  not flushed Oct  8 16:37:44 zentyal postfix/smtpd[18138]: disconnect from localhost.localdomain[127.0.0.1] Oct  8 16:38:17 zentyal dovecot: imap-login: Disconnected (auth failed, 1 attempts in 8 secs): user=<xxx@mydomain.co.uk>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured, session=<ydlwppkhjwB/AAAB> Oct  8 16:38:17 zentyal dovecot: imap-login: Disconnected (auth failed, 1 attempts in 6 secs): user=<xxx@mydomain.co.uk>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured, session=<cyiIppkhkQB/AAAB> Oct  8 16:38:29 zentyal dovecot: imap-login: Disconnected (auth failed, 1 attempts in 12 secs): user=<xxx@mydomain.co.uk>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured, session=<E1/rppkhmgB/AAAB> Oct  8 16:38:29 zentyal dovecot: imap-login: Disconnected (auth failed, 1 attempts in 6 secs): user=<xxx@mydomain.co.uk>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured, session=<Y8s/p5khmwB/AAAB> Oct  8 16:38:40 zentyal dovecot: imap-login: Disconnected (auth failed, 1 attempts in 4 secs): user=<xxx@mydomain.co.uk>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured, session=<LfoOqJkhnwB/AAAB> Oct  8 16:38:40 zentyal dovecot: imap-login: Disconnected (auth failed, 1 attempts in 2 secs): user=<xxx@mydomain.co.uk>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured, session=<YkImqJkhoAB/AAAB> Oct  8 16:38:44 zentyal dovecot: imap-login: Disconnected (auth failed, 1 attempts in 2 secs): user=<xxx@mydomain.co.uk>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured, session=</l1jqJkhowB/AAAB> Oct  8 16:38:44 zentyal dovecot: imap-login: Disconnected (auth failed, 1 attempts in 4 secs): user=<xxx@mydomain.co.uk>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured, session=<RPZEqJkhogB/AAAB> Oct  8 16:40:45 zentyal fetchmail[5741]: 1 message for xxx@popaddress.co.uk at pop.1and1.co.uk (3305 octets).
Oct  8 16:40:45 zentyal postfix/smtpd[19531]: connect from localhost.localdomain[127.0.0.1] Oct  8 16:40:45 zentyal postfix/smtpd[19531]: 764A22E01033: client=localhost.localdomain[127.0.0.1]
Oct  8 16:40:47 zentyal postfix/cleanup[19537]: warning: 764A22E01033: unreasonable virtual_alias_maps map nesting for xxx@mydomain.co.uk -- message not accepted, try again later Oct  8 16:40:47 zentyal fetchmail[5741]: reading message xxx@popaddress.co.uk@pop.1and1.co.uk:1 of 1 (3305 octets) (log message incomplete) Oct  8 16:40:47 zentyal fetchmail[5741]: SMTP error: 451 4.6.0 Alias expansion error Oct  8 16:40:47 zentyal fetchmail[5741]:  not flushed Oct  8 16:40:47 zentyal postfix/smtpd[19531]: disconnect from localhost.localdomain[127.0.0.1]







can anyone give me some advise how to fix this please

26

Installation and Upgrades / Can't receive mail

« on: October 07, 2015, 10:04:23 am »

I've configured my server recently and have a problem with mail, I can send mail but don't seem to be receiving any. I have configured a virtual domain also an external pop mail account . When I view the mail logs their are records of the sent mail but no records of any attempt to receive mail.
I've no idea how to trouble shoot this can anyone help please.

27

Installation and Upgrades / global mailbox

« on: October 01, 2015, 09:02:10 pm »

I would like to create a global mailbox where emails from a number of email address's are delivered.
Is this possible ?