Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - mkugler

Pages: [1] 2
1
Hallo everybody, i have a Problem with my Zentyal 6.1 Installation after a reboot.
 I see in the start screen many falls from MySQL - the message says: Failed to start MySQL Community Server - See systemctl status MySQL Community Server.
I can‘t  connect via ssh, i have no connection. The System Runs under VMware 8 and i have no access through the VMware Remote Console. The Screen Shows the login screen from Zentyal. So i have no Access to the Zentyal console.
Who can help me to start my system correctly and support me withe the MySQL problem?

Thanks in advance.

2
Other modules / Re: Zentyal 6.1 After restart - Failed to start MySQL
« on: September 28, 2023, 03:03:23 pm »
The problem is solved. I had a connect via ssh and see that sda1 are full, i was ablento expand the disk using VMware and the system starts correctly again.
SOLVED

3
Other modules / Zentyal 6.1 After restart - Failed to start MySQL
« on: September 27, 2023, 06:34:24 pm »
Hallo everybody, i have a Problem with my Zentyal 6.1 Installation after a reboot.
 I see in the start screen many falls from MySQL - the message says: Failed to start MySQL Community Server - See systemctl status MySQL Community Server.
I can‘t  connect via ssh, i have no connection. The System Runs under VMware 8 and i have no access through the VMware Remote Console. The Screen Shows the login screen from Zentyal. So i have no Access to the Zentyal console.
Who can help me to start my system correctly and support me withe the MySQL problem?

Thanks in advance.

4
Other modules / Re: Problems saving network data
« on: May 25, 2022, 10:32:45 am »
Hello everyone, first of all I would like to thank you for the help here, I have looked at everything again over the last few days and sometimes the problem is right in front of my eyes. First of all the problem is solved, but what was it?
After my last post I looked at the file Interfaces under /etc/network/ and there I found the entry for network card bundling, but since I haven't set up any bundling it can't work. Under the Zentyal VM I deactivated the second interface completely - it was activated but not configured - after I restarted the server twice, all errors and problems were gone. I don't know why Zentyal tried to create a bundle, as I didn't have it configured myself. I am just glad that this solved the problem. Thanks again for the help here.

5
Other modules / Re: Problems saving network data
« on: May 20, 2022, 11:41:46 am »
I turned off antivirus and mail filter, the following errors remained:

May 20 10:45:48 srvdc01 networkd-dispatcher[935]: ERROR:Unknown state for interface NetworkctlListState(idx=1, name='lo', type='loopback', operational='n/a', administrative='unmanaged'): n/a
May 20 10:45:48 srvdc01 networkd-dispatcher[935]: ERROR:Unknown state for interface NetworkctlListState(idx=2, name='eth0', type='ether', operational='n/a', administrative='unmanaged'): n/a
May 20 10:45:48 srvdc01 networkd-dispatcher[935]: ERROR:Unknown state for interface NetworkctlListState(idx=3, name='eth1', type='ether', operational='n/a', administrative='unmanaged'): n/a
May 20 10:45:48 srvdc01 networkd-dispatcher[935]: ERROR:Unknown state for interface NetworkctlListState(idx=4, name='bond0', type='ether', operational='n/a', administrative='unmanaged'): n/a

For this I found a troubleshooting on the Internet, but it did not solve the problem, after I renamed the path, the whole network stopped working, the system was no longer pingable, etc.. I have then undone this again, so that the system at least works again.

https://forums.debian.net/viewtopic.php?t=135550

6
Other modules / Re: Problems saving network data
« on: May 19, 2022, 11:05:00 am »
Hi, thanks for your help, unfortunately this also did not lead to success. The main problem is still when I alone changes to the network e.g. assignment of a fixed IP address, then this is not saved, the process is not completed at all. In the syslog I have searched after a restart times for "error" and found some errors. I share these errors here again in the forum.

May 19 10:04:59 srvdc01 kernel: [    0.641692] RAS: Correctable Errors collector initialized.
May 19 10:04:59 srvdc01 kernel: [    8.173739] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,usrquota,grpquota,acl
May 19 10:05:03 srvdc01 networkd-dispatcher[1013]: ERROR:Unknown state for interface NetworkctlListState(idx=1, name='lo', type='loopback', operational='n/a', administrative='unmanaged'): n/a
May 19 10:05:03 srvdc01 networkd-dispatcher[1013]: ERROR:Unknown state for interface NetworkctlListState(idx=2, name='eth0', type='ether', operational='n/a', administrative='unmanaged'): n/a
May 19 10:05:03 srvdc01 networkd-dispatcher[1013]: ERROR:Unknown state for interface NetworkctlListState(idx=3, name='eth1', type='ether', operational='n/a', administrative='unmanaged'): n/a
May 19 10:05:03 srvdc01 networkd-dispatcher[1013]: ERROR:Unknown state for interface NetworkctlListState(idx=4, name='bond0', type='ether', operational='n/a', administrative='unmanaged'): n/a
May 19 10:10:01 srvdc01 amavis[4424]: ...45, in getaddrinfo\\n for res in _socket.getaddrinfo(host, port, family, type, proto, flags):\\nsocket.gaierror: [Errno -3] Temporary failure in name resolution\\nError in sys.excepthook:\\nTraceback (most recent call last):\\n File "/usr/lib/python3/dist-packages/apport_python_hook.py", line 154, in apport_excepthook\\n os.O_WRONLY | os.O_CREAT | os.O_EXCL, 0o640), 'wb') as f:\\nFileNotFoundError: [Errno 2] No such file or directory: '/var/crash/_usr_bin
or: [Errno -3] Temporary failure in name resolution\\nError in sys.excepthook:\\nTraceback (most recent call last):\\n File "/usr/lib/python3/dist-packages/apport_python_hook.py", line 154, in apport_excepthook\\n os.O_WRONLY | os.O_CREAT | os.O_EXCL, 0o640), 'wb') as f:\\nFileNotFoundError: [Errno 2] No such file or directory: '/var/crash/_usr_bin_pyzor.125.crash'\\n\\nOriginal exception was:\\nTraceback (most recent call last):\\n File "/usr/bin/pyzor", line 408, in <module>\\n main()\\n File
kages/apport_python_hook.py", line 154, in apport_excepthook\\n os.O_WRONLY | os.O_CREAT | os.O_EXCL, 0o640), 'wb') as f:\\nFileNotFoundError: [Errno 2] No such file or directory: '/var/crash/_usr_bin_pyzor.125.crash'\\n\\nOriginal exception was:\\nTraceback (most recent call last):\\n File "/usr/bin/pyzor", line 408, in <module>\\n main()\\n File "/usr/bin/pyzor", line 152, in main\\n if not dispatch(client, servers, config):\\n File "/usr/bin/pyzor", line 241, in check\\n send_digest(digested,
, proto, flags):\\nsocket.gaierror: [Errno -3] Temporary failure in name resolution
May 19 10:10:01 srvdc01 amavis[4424]: _WARN: internal error, python traceback seen in response
May 19 10:10:02 srvdc01 amavis[4424]: SA dbg: pyzor: failure to parse response "socket.gaierror: [Errno -3] Temporary failure in name resolution"
May 19 10:10:02 srvdc01 amavis[4424]: SA dbg: pyzor: failure to parse response "Error in sys.excepthook:"
May 19 10:10:02 srvdc01 amavis[4424]: SA dbg: pyzor: failure to parse response "FileNotFoundError: [Errno 2] No such file or directory: '/var/crash/_usr_bin_pyzor.125.crash'"
May 19 10:10:02 srvdc01 amavis[4424]: SA dbg: pyzor: failure to parse response "socket.gaierror: [Errno -3] Temporary failure in name resolution"
May 19 10:10:02 srvdc01 amavis[4424]: _WARN: razor2: razor2 check failed:  razor2: razor2 had unknown error during get_server_info at /usr/share/perl5/Mail/SpamAssassin/Plugin/Razor2.pm line 186. at /usr/share/perl5/Mail/SpamAssassin/Plugin/Razor2.pm line 329.
May 19 10:10:21 srvdc01 clamonacc[5152]: ERROR: ClamClient: Could not connect to clamd, Couldn't connect to server
May 19 10:10:21 srvdc01 clamonacc[5152]: ERROR: Clamonacc: daemon is local, but a connection could not be established
May 19 10:10:27 srvdc01 clamonacc[5353]: ERROR: ClamClient: Could not connect to clamd, Couldn't connect to server
May 19 10:10:27 srvdc01 clamonacc[5353]: ERROR: Clamonacc: daemon is local, but a connection could not be established
May 19 10:10:32 srvdc01 clamonacc[5429]: ERROR: ClamClient: Could not connect to clamd, Couldn't connect to server
May 19 10:10:32 srvdc01 clamonacc[5429]: ERROR: Clamonacc: daemon is local, but a connection could not be established
May 19 10:10:37 srvdc01 clamonacc[5522]: ERROR: ClamClient: Could not connect to clamd, Couldn't connect to server
May 19 10:10:37 srvdc01 clamonacc[5522]: ERROR: Clamonacc: daemon is local, but a connection could not be established
May 19 10:10:42 srvdc01 clamonacc[5684]: ERROR: ClamClient: Could not connect to clamd, Couldn't connect to server
May 19 10:10:42 srvdc01 clamonacc[5684]: ERROR: Clamonacc: daemon is local, but a connection could not be established
May 19 10:10:43 srvdc01 sh[5657]: Error looking up domain users
May 19 10:10:47 srvdc01 clamonacc[5913]: ERROR: ClamClient: Could not connect to clamd, Couldn't connect to server
May 19 10:10:47 srvdc01 clamonacc[5913]: ERROR: Clamonacc: daemon is local, but a connection could not be established
May 19 10:10:51 srvdc01 sh[5657]: Error looking up domain users
May 19 10:10:53 srvdc01 sh[5657]: Error looking up domain users
May 19 10:10:54 srvdc01 sh[5657]: Error looking up domain users
r-strong -Wformat -Werror=format-security -fno-strict-aliasing -fno-delete-null-pointer-checks -DNO_VERSION_DATE -DDIG_SIGCHASE' 'LDFLAGS=-Wl,-Bsymbolic-functions -Wl,-z,relro -Wl,-z,now' 'CPPFLAGS=-Wdate-time -D_FORTIFY_SOURCE=2'
May 19 10:10:56 srvdc01 sh[5657]: Error looking up domain users
May 19 10:11:01 srvdc01 sh[5657]: Error looking up domain users
May 19 10:11:04 srvdc01 sh[5657]: Error looking up domain users
May 19 10:11:09 srvdc01 sh[5657]: Error looking up domain users
May 19 10:11:11 srvdc01 sh[5657]: Error looking up domain users
May 19 10:11:16 srvdc01 named[6184]: dispatch 0x7fe120513d20: shutting down due to TCP receive error: 204.61.216.126#53: connection reset
May 19 10:11:16 srvdc01 sh[5657]: Error looking up domain users
May 19 10:11:17 srvdc01 sh[5657]: Error looking up domain users
May 19 10:11:28 srvdc01 sh[5657]: Error looking up domain users
May 19 10:11:37 srvdc01 sh[5657]: Error looking up domain users
May 19 10:11:42 srvdc01 sh[5657]: Error looking up domain users
May 19 10:11:46 srvdc01 sh[5657]: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id:  37518
May 19 10:11:46 srvdc01 sh[5657]: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id:  44311
May 19 10:11:46 srvdc01 sh[5657]: 1877464019.sig-srvdc01.zentyal-domain.lan. 0 ANY TKEY gss-tsig. 1652947906 1652947906 3 NOERROR 1418 YIIFhgYJKoZIhvcSAQICAQBuggV1MIIFcaADAgEFoQMCAQ6iBwMFACAA AACjggRiYYIEXjCCBFqgAwIBBaEUGxJaRU5UWUFMLURPTUFJTi5MQU6i LDAqoAMCAQGhIzAhGwNETlMbGnNydmRjMDEuemVudHlhbC1kb21haW4u bGFuo4IEDTCCBAmgAwIBF6EDAgEBooID+wSCA/c9ModzNMPVreOIo1zB FBk9049cffqBwi46JS2krcN+4AOOVWcKerf4GKIKijiqdqGU3RFqUAbt j0kFkX4B4ODFX0Bnp4yJhrpNv2R9+O82hjpiiFiDFWNVsBxn1uGyG6YZ 1WFjVhpb6YQffQgmRBOWlKU
May 19 10:11:46 srvdc01 sh[5657]: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id:  44311
May 19 10:11:46 srvdc01 sh[5657]: 1877464019.sig-srvdc01.zentyal-domain.lan. 0 ANY TKEY gss-tsig. 1652947906 1652951506 3 NOERROR 152 YIGVBgkqhkiG9xIBAgICAG+BhTCBgqADAgEFoQMCAQ+idjB0oAMCARei bQRrxD5PfHLQJG2wKRMBoEpSY6MMlxjILrIwSTu9ZkK1aG5LWJJgz5d9 ehQCP8sBB58pA1PTEqRDsBkUif6NmQaHwhx8kftn1RwtU4VrORcsd/96 26gi/Afz0BSUOD2I+lnfTUQjQDmX8yETrNw= 0
May 19 10:11:46 srvdc01 sh[5657]: ;; ->>HEADER<<- opcode: UPDATE, status: NOERROR, id:  54140
May 19 10:11:46 srvdc01 sh[5657]: 1877464019.sig-srvdc01.zentyal-domain.lan. 0 ANY TSIG gss-tsig. 1652947906 300 28 BAQE//////8AAAAAAADbiNr94+svENwTLbzrxw== 54140 NOERROR 0
May 19 10:11:46 srvdc01 sh[5657]: ;; ->>HEADER<<- opcode: UPDATE, status: NOERROR, id:  54140
May 19 10:11:46 srvdc01 sh[5657]: 1877464019.sig-srvdc01.zentyal-domain.lan. 0 ANY TSIG gss-tsig. 1652947906 300 28 BAQF//////8AAAAAJMHucbUnhPQWKyrtyVd28g== 54140 NOERROR 0
May 19 10:11:46 srvdc01 sh[5657]: ;; ->>HEADER<<- opcode: UPDATE, status: NOERROR, id:  48155
May 19 10:11:47 srvdc01 sh[5657]: zentyal-domain.lan.#0110#011ANY#011TSIG#011hmac-md5.sig-alg.reg.int. 1652947906 300 16 sAIlsIK2XDYtmFM/576m9g== 48155 NOERROR 0
May 19 10:11:47 srvdc01 sh[5657]: ;; ->>HEADER<<- opcode: UPDATE, status: NOERROR, id:  48155
May 19 10:11:47 srvdc01 sh[5657]: zentyal-domain.lan.#0110#011ANY#011TSIG#011hmac-md5.sig-alg.reg.int. 1652947906 300 16 mvsvI7ZrP0YRTDP44TTS3g== 48155 NOERROR 0
May 19 10:12:26 srvdc01 sh[5657]: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id:  22997
May 19 10:12:26 srvdc01 sh[5657]: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id:  15265
May 19 10:12:26 srvdc01 sh[5657]: 3489801607.sig-srvdc01.zentyal-domain.lan. 0 ANY TKEY gss-tsig. 1652947946 1652947946 3 NOERROR 1419 YIIFhwYJKoZIhvcSAQICAQBuggV2MIIFcqADAgEFoQMCAQ6iBwMFACAA AACjggRiYYIEXjCCBFqgAwIBBaEUGxJaRU5UWUFMLURPTUFJTi5MQU6i LDAqoAMCAQGhIzAhGwNETlMbGnNydmRjMDEuemVudHlhbC1kb21haW4u bGFuo4IEDTCCBAmgAwIBF6EDAgEBooID+wSCA/c9ModzNMPVreOIo1zB FBk9049cffqBwi46JS2krcN+4AOOVWcKerf4GKIKijiqdqGU3RFqUAbt j0kFkX4B4ODFX0Bnp4yJhrpNv2R9+O82hjpiiFiDFWNVsBxn1uGyG6YZ 1WFjVhpb6YQffQgmRBOWlKU
May 19 10:12:26 srvdc01 sh[5657]: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id:  15265
May 19 10:12:26 srvdc01 sh[5657]: 3489801607.sig-srvdc01.zentyal-domain.lan. 0 ANY TKEY gss-tsig. 1652947946 1652951546 3 NOERROR 152 YIGVBgkqhkiG9xIBAgICAG+BhTCBgqADAgEFoQMCAQ+idjB0oAMCARei bQRrj65M8+ZQuNJAyWJ4it1jwYGpAHLuM7kT8HmuZ5l1IyASzOmy681X wCPv7PAY0EEuooQdzIgRg5XB0jq0NmjXMINeMd+H9d3Ic8aqBoNCxGzn jawpnkpvwFmQhmaTizV3km1nlPIwZvpvxQU= 0
May 19 10:12:26 srvdc01 sh[5657]: ;; ->>HEADER<<- opcode: UPDATE, status: NOERROR, id:  43490
May 19 10:12:26 srvdc01 sh[5657]: 3489801607.sig-srvdc01.zentyal-domain.lan. 0 ANY TSIG gss-tsig. 1652947946 300 28 BAQE//////8AAAAAMBuJWIswtbC37iQxs+Jw4g== 43490 NOERROR 0
May 19 10:12:26 srvdc01 sh[5657]: ;; ->>HEADER<<- opcode: UPDATE, status: NOERROR, id:  43490
May 19 10:12:26 srvdc01 sh[5657]: 3489801607.sig-srvdc01.zentyal-domain.lan. 0 ANY TSIG gss-tsig. 1652947946 300 28 BAQF//////8AAAAACZ0OOIpokVeavk9BuG2ZCA== 43490 NOERROR 0
May 19 10:12:26 srvdc01 sh[5657]: ;; ->>HEADER<<- opcode: UPDATE, status: NOERROR, id:  27009
May 19 10:12:26 srvdc01 sh[5657]: zentyal-domain.lan.#0110#011ANY#011TSIG#011hmac-md5.sig-alg.reg.int. 1652947946 300 16 Zztq8NbDngiW+tNNWfBTUg== 27009 NOERROR 0
May 19 10:12:26 srvdc01 sh[5657]: ;; ->>HEADER<<- opcode: UPDATE, status: NOERROR, id:  27009
May 19 10:12:26 srvdc01 sh[5657]: zentyal-domain.lan.#0110#011ANY#011TSIG#011hmac-md5.sig-alg.reg.int. 1652947946 300 16 8enTLELU39BO3z2Acgu3kg== 27009 NOERROR 0
May 19 10:12:31 srvdc01 amavis[4655]: (04655-01) SA dbg: async: query 30710/IN/A/linkedin.com.dbl.spamhaus.org already underway, adding no.3 URIBL_DBL_ERROR
May 19 10:12:31 srvdc01 amavis[4655]: (04655-01) SA dbg: dns: URIBL_DBL_ERROR lookup start
May 19 10:12:31 srvdc01 amavis[4655]: (04655-01) SA dbg: async: query 45237/IN/A/en25.com.dbl.spamhaus.org already underway, adding no.3 URIBL_DBL_ERROR
May 19 10:12:31 srvdc01 amavis[4655]: (04655-01) SA dbg: dns: URIBL_DBL_ERROR lookup start
May 19 10:12:31 srvdc01 amavis[4655]: (04655-01) SA dbg: async: query 49301/IN/A/sophos.com.dbl.spamhaus.org already underway, adding no.3 URIBL_DBL_ERROR
May 19 10:12:31 srvdc01 amavis[4655]: (04655-01) SA dbg: dns: URIBL_DBL_ERROR lookup start
May 19 10:12:31 srvdc01 amavis[4655]: (04655-01) SA dbg: async: query 49301/IN/A/sophos.com.dbl.spamhaus.org already underway, adding no.13 URIBL_DBL_ERROR
May 19 10:12:31 srvdc01 amavis[4655]: (04655-01) SA dbg: dns: URIBL_DBL_ERROR lookup start
May 19 10:12:31 srvdc01 amavis[4655]: (04655-01) SA dbg: async: query 9287/IN/A/sophos.de.dbl.spamhaus.org already underway, adding no.3 URIBL_DBL_ERROR
May 19 10:12:31 srvdc01 amavis[4655]: (04655-01) SA dbg: dns: URIBL_DBL_ERROR lookup start
May 19 10:12:31 srvdc01 amavis[4655]: (04655-01) SA dbg: async: query 48110/IN/A/kuglerm.de.dbl.spamhaus.org already underway, adding no.3 URIBL_DBL_ERROR
May 19 10:12:31 srvdc01 amavis[4655]: (04655-01) SA dbg: dns: URIBL_DBL_ERROR lookup start
May 19 10:12:31 srvdc01 amavis[4655]: (04655-01) SA dbg: async: query 49301/IN/A/sophos.com.dbl.spamhaus.org already underway, adding no.23 URIBL_DBL_ERROR
May 19 10:12:31 srvdc01 amavis[4655]: (04655-01) SA dbg: dns: URIBL_DBL_ERROR lookup start
May 19 10:12:31 srvdc01 amavis[4655]: (04655-01) SA dbg: async: query 49301/IN/A/sophos.com.dbl.spamhaus.org already underway, adding no.33 URIBL_DBL_ERROR
May 19 10:12:31 srvdc01 amavis[4655]: (04655-01) SA dbg: dns: URIBL_DBL_ERROR lookup start
May 19 10:12:31 srvdc01 amavis[4655]: (04655-01) SA dbg: async: query 49301/IN/A/sophos.com.dbl.spamhaus.org already underway, adding no.43 URIBL_DBL_ERROR
May 19 10:12:31 srvdc01 amavis[4655]: (04655-01) SA dbg: dns: URIBL_DBL_ERROR lookup start
May 19 10:12:33 srvdc01 amavis[4655]: (04655-01) SA dbg: async: calling callback on key DNSBL:linkedin.com:dbl.spamhaus.org, rule URIBL_DBL_ERROR
May 19 10:12:33 srvdc01 amavis[4655]: (04655-01) SA dbg: uridnsbl: complete_dnsbl_lookup URIBL_DBL_ERROR DNSBL:linkedin.com:dbl.spamhaus.org
May 19 10:12:33 srvdc01 amavis[4655]: (04655-01) SA dbg: async: calling callback on key DNSBL:en25.com:dbl.spamhaus.org, rule URIBL_DBL_ERROR
May 19 10:12:33 srvdc01 amavis[4655]: (04655-01) SA dbg: uridnsbl: complete_dnsbl_lookup URIBL_DBL_ERROR DNSBL:en25.com:dbl.spamhaus.org
May 19 10:12:33 srvdc01 amavis[4655]: (04655-01) SA dbg: async: calling callback on key DNSBL:kuglerm.de:dbl.spamhaus.org, rule URIBL_DBL_ERROR
May 19 10:12:33 srvdc01 amavis[4655]: (04655-01) SA dbg: uridnsbl: complete_dnsbl_lookup URIBL_DBL_ERROR DNSBL:kuglerm.de:dbl.spamhaus.org
May 19 10:12:33 srvdc01 amavis[4655]: (04655-01) SA dbg: async: calling callback on key DNSBL:sophos.de:dbl.spamhaus.org, rule URIBL_DBL_ERROR
May 19 10:12:33 srvdc01 amavis[4655]: (04655-01) SA dbg: uridnsbl: complete_dnsbl_lookup URIBL_DBL_ERROR DNSBL:sophos.de:dbl.spamhaus.org
May 19 10:12:33 srvdc01 amavis[4655]: (04655-01) SA dbg: async: calling callback on key DNSBL:sophos.com:dbl.spamhaus.org, rule URIBL_DBL_ERROR
May 19 10:12:33 srvdc01 amavis[4655]: (04655-01) SA dbg: uridnsbl: complete_dnsbl_lookup URIBL_DBL_ERROR DNSBL:sophos.com:dbl.spamhaus.org
May 19 10:12:33 srvdc01 amavis[4655]: (04655-01) SA dbg: async: calling callback on key DNSBL:sophos.com:dbl.spamhaus.org, rule URIBL_DBL_ERROR
May 19 10:12:33 srvdc01 amavis[4655]: (04655-01) SA dbg: uridnsbl: complete_dnsbl_lookup URIBL_DBL_ERROR DNSBL:sophos.com:dbl.spamhaus.org
May 19 10:12:33 srvdc01 amavis[4655]: (04655-01) SA dbg: async: calling callback on key DNSBL:sophos.com:dbl.spamhaus.org, rule URIBL_DBL_ERROR
May 19 10:12:33 srvdc01 amavis[4655]: (04655-01) SA dbg: uridnsbl: complete_dnsbl_lookup URIBL_DBL_ERROR DNSBL:sophos.com:dbl.spamhaus.org
May 19 10:12:33 srvdc01 amavis[4655]: (04655-01) SA dbg: async: calling callback on key DNSBL:sophos.com:dbl.spamhaus.org, rule URIBL_DBL_ERROR
May 19 10:12:33 srvdc01 amavis[4655]: (04655-01) SA dbg: uridnsbl: complete_dnsbl_lookup URIBL_DBL_ERROR DNSBL:sophos.com:dbl.spamhaus.org
May 19 10:12:33 srvdc01 amavis[4655]: (04655-01) SA dbg: async: calling callback on key DNSBL:sophos.com:dbl.spamhaus.org, rule URIBL_DBL_ERROR
May 19 10:12:33 srvdc01 amavis[4655]: (04655-01) SA dbg: uridnsbl: complete_dnsbl_lookup URIBL_DBL_ERROR DNSBL:sophos.com:dbl.spamhaus.org

7
Other modules / Re: Problems saving network data
« on: May 14, 2022, 11:23:09 am »
Hi, first of all thank you very much for your help, I was on vacation for 2 weeks now so I couldn't get back to you. The problem with the antivirus I could solve by changing the path, the 2nd part I unfortunately do not understand exactly, how was the file called, must this be linked, can you help me here please again. Thanks in advance.

Antivirus changes: at '/lib/systemd/system/zentyal.antivirus-clamonacc.service' - Path to '/usr/sbin/'

sudo systemctl daemon-reload
sudo zs antivirus restart
---------------------
Regarding the memory problem, I created a file named "dhcpd" and stored the information from the link.
This is probably not correct, since the problem persists and I have not found any other solution on the Internet. Would you have another idea.

Many Thanks in advanced

Mathias

8
Other modules / Re: Problems saving network data
« on: April 24, 2022, 10:15:34 am »
I have now checked the syslog, there I found the following errors:

Apr 24 10:00:45 srvdc01 systemd[11870]: zentyal.antivirus-clamonacc.service: Failed to execute command: No such file or directory
Apr 24 10:00:45 srvdc01 systemd[11870]: zentyal.antivirus-clamonacc.service: Failed at step EXEC spawning /usr/bin/clamonacc: No such file or directory
Apr 24 10:00:45 srvdc01 systemd[1]: zentyal.antivirus-clamonacc.service: Main process exited, code=exited, status=203/EXEC
Apr 24 10:00:45 srvdc01 systemd[1]: zentyal.antivirus-clamonacc.service: Failed with result 'exit-code'.
Apr 24 10:00:50 srvdc01 systemd[1]: zentyal.antivirus-clamonacc.service: Service hold-off time over, scheduling restart.
Apr 24 10:00:50 srvdc01 systemd[1]: zentyal.antivirus-clamonacc.service: Scheduled restart job, restart counter is at 47.
Apr 24 10:00:50 srvdc01 systemd[1]: Stopped Executable for On-Access scans.
Apr 24 10:00:50 srvdc01 systemd[1]: Started Executable for On-Access scans.
Apr 24 10:00:50 srvdc01 systemd[11926]: zentyal.antivirus-clamonacc.service: Failed to execute command: No such file or directory
Apr 24 10:00:50 srvdc01 systemd[11926]: zentyal.antivirus-clamonacc.service: Failed at step EXEC spawning /usr/bin/clamonacc: No such file or directory
Apr 24 10:00:50 srvdc01 systemd[1]: zentyal.antivirus-clamonacc.service: Main process exited, code=exited, status=203/EXEC
Apr 24 10:00:50 srvdc01 systemd[1]: zentyal.antivirus-clamonacc.service: Failed with result 'exit-code'.
Apr 24 10:00:53 srvdc01 dhcpd[5585]: Commit: IP: 192.168.1.20 DHCID: 48:e1:e9:71:21:1d Name: Meross_Smart_Plug
Apr 24 10:00:53 srvdc01 kernel: [  612.267609] audit: type=1400 audit(1650787253.510:24): apparmor="DENIED" operation="exec" profile="/usr/sbin/dhcpd" name="/usr/share/zentyal-dhcp/dhcp-dyndns.sh" pid=11955 comm="dhcpd" requested_mask="x" denied_mask="x" fsuid=118 ouid=0
Apr 24 10:00:53 srvdc01 dhcpd[5585]: execute_statement argv[0] = /usr/share/zentyal-dhcp/dhcp-dyndns.sh
Apr 24 10:00:53 srvdc01 dhcpd[5585]: execute_statement argv[1] = add
Apr 24 10:00:53 srvdc01 dhcpd[5585]: execute_statement argv[2] = 192.168.1.20
Apr 24 10:00:53 srvdc01 dhcpd[5585]: execute_statement argv[3] = 48:e1:e9:71:21:1d
Apr 24 10:00:53 srvdc01 dhcpd[5585]: execute_statement argv[4] = Meross_Smart_Plug
Apr 24 10:00:53 srvdc01 dhcpd[11955]: Unable to execute /usr/share/zentyal-dhcp/dhcp-dyndns.sh: Permission denied
Apr 24 10:00:53 srvdc01 dhcpd[5585]: execute: /usr/share/zentyal-dhcp/dhcp-dyndns.sh exit status 32512
Apr 24 10:00:53 srvdc01 dhcpd[5585]: DHCPREQUEST for 192.168.1.20 from 48:e1:e9:71:21:1d (Meross_Smart_Plug) via eth0
Apr 24 10:00:53 srvdc01 dhcpd[5585]: DHCPACK on 192.168.1.20 to 48:e1:e9:71:21:1d (Meross_Smart_Plug) via eth0
Apr 24 10:00:55 srvdc01 systemd[1]: zentyal.antivirus-clamonacc.service: Service hold-off time over, scheduling restart.
Apr 24 10:00:55 srvdc01 systemd[1]: zentyal.antivirus-clamonacc.service: Scheduled restart job, restart counter is at 48.
Apr 24 10:00:55 srvdc01 systemd[1]: Stopped Executable for On-Access scans.
Apr 24 10:00:55 srvdc01 systemd[1]: Started Executable for On-Access scans.
Apr 24 10:00:55 srvdc01 systemd[12088]: zentyal.antivirus-clamonacc.service: Failed to execute command: No such file or directory
Apr 24 10:00:55 srvdc01 systemd[12088]: zentyal.antivirus-clamonacc.service: Failed at step EXEC spawning /usr/bin/clamonacc: No such file or directory
Apr 24 10:00:55 srvdc01 systemd[1]: zentyal.antivirus-clamonacc.service: Main process exited, code=exited, status=203/EXEC
Apr 24 10:00:55 srvdc01 systemd[1]: zentyal.antivirus-clamonacc.service: Failed with result 'exit-code'.
Apr 24 10:00:56 srvdc01 systemd[1]: Started Session c3 of user ejabberd.
Apr 24 10:00:57 srvdc01 dhcpd[5585]: Commit: IP: 192.168.1.40 DHCID: 48:e1:e9:71:0e:cf Name: Meross_Smart_Plug
Apr 24 10:00:57 srvdc01 dhcpd[5585]: execute_statement argv[0] = /usr/share/zentyal-dhcp/dhcp-dyndns.sh
Apr 24 10:00:57 srvdc01 dhcpd[5585]: execute_statement argv[1] = add
Apr 24 10:00:57 srvdc01 dhcpd[5585]: execute_statement argv[2] = 192.168.1.40
Apr 24 10:00:57 srvdc01 dhcpd[5585]: execute_statement argv[3] = 48:e1:e9:71:0e:cf
Apr 24 10:00:57 srvdc01 dhcpd[5585]: execute_statement argv[4] = Meross_Smart_Plug
Apr 24 10:00:57 srvdc01 dhcpd[12272]: Unable to execute /usr/share/zentyal-dhcp/dhcp-dyndns.sh: Permission denied
Apr 24 10:00:57 srvdc01 dhcpd[5585]: execute: /usr/share/zentyal-dhcp/dhcp-dyndns.sh exit status 32512
Apr 24 10:00:57 srvdc01 kernel: [  616.354148] audit: type=1400 audit(1650787257.598:25): apparmor="DENIED" operation="exec" profile="/usr/sbin/dhcpd" name="/usr/share/zentyal-dhcp/dhcp-dyndns.sh" pid=12272 comm="dhcpd" requested_mask="x" denied_mask="x" fsuid=118 ouid=0
Apr 24 10:00:57 srvdc01 dhcpd[5585]: DHCPREQUEST for 192.168.1.40 from 48:e1:e9:71:0e:cf (Meross_Smart_Plug) via eth0
Apr 24 10:00:57 srvdc01 dhcpd[5585]: DHCPACK on 192.168.1.40 to 48:e1:e9:71:0e:cf (Meross_Smart_Plug) via eth0

regarding DHCP I have executed the following command:
/usr/share/zentyal-dhcp/dhcp-dyndns.sh

Message:
Required keytab /etc/dhcp/samba-keys/dhcpduser.keytab not found, it needs to be created.
Use the following commands as root
samba-tool domain exportkeytab --principal=dhcpduser@ZENTYAL-DOMAIN.LAN /etc/dhcp/samba-keys/dhcpduser.keytab
chown XXXX:XXXX /etc/dhcp/samba-keys/dhcpduser.keytab
Replace 'XXXX:XXXX' with the user & group that dhcpd runs as on your distro
chmod 400 /etc/dhcp/samba-keys/dhcpduser.keytab

Executed the following command:
sudo samba-tool domain exportkeytab --principal=dhcpduser@ZENTYAL-DOMAIN.LAN /etc/dhcp/samba-keys/dhcpduser.keytab
sudo chown root:dhcpd /etc/dhcp/samba-keys/dhcpduser.keytab

But unfortunately the problem remains



9
Other modules / Re: Problems saving network data
« on: April 16, 2022, 10:36:00 am »
Hi turayon.

I have changed the LOG to Debut, I get the following message when I save:

Einige Module meldeten ein Fehler beim Sichern der Änderungen. Weitere Informationen finden Sie in den Logs in /var/log/zentyal/

The following modules failed while saving their changes, their state is unknown: network The following modules failed while saving their changes, their state is unknown: network at The following modules failed while saving their changes, their state is unknown: network at /usr/share/perl5/EBox/GlobalImpl.pm line 727 EBox::GlobalImpl::saveAllModules('EBox::GlobalImpl=HASH(0x56353cfcaa40)', 'progress', 'EBox::ProgressIndicator=HASH(0x563538de5698)') called at /usr/share/perl5/EBox/Global.pm line 95 EBox::Global::AUTOLOAD('EBox::Global=HASH(0x56353cec6c40)', 'progress', 'EBox::ProgressIndicator=HASH(0x563538de5698)') called at /usr/share/zentyal/global-action line 32 eval {...} at /usr/share/zentyal/global-action line 30

The following can be seen in the zentyal.log:

2022/04/16 10:24:03 ERROR> GlobalImpl.pm:727 EBox::GlobalImpl::saveAllModules - The following modules failed while saving their changes, their state is unknown: network  at The following modules failed while saving their changes, their state is unknown: network  at /usr/share/perl5/EBox/GlobalImpl.pm line 727
EBox::GlobalImpl::saveAllModules('EBox::GlobalImpl=HASH(0x56353cfcaa40)', 'progress', 'EBox::ProgressIndicator=HASH(0x563538de5698)') called at /usr/share/perl5/EBox/Global.pm line 95
EBox::Global::AUTOLOAD('EBox::Global=HASH(0x56353cec6c40)', 'progress', 'EBox::ProgressIndicator=HASH(0x563538de5698)') called at /usr/share/zentyal/global-action line 32
eval {...} at /usr/share/zentyal/global-action line 30

2022/04/16 10:24:51 ERROR> Sudo.pm:240 EBox::Sudo::_rootError - root command LANG=C /usr/sbin/ejabberdctl status failed.
2022/04/16 10:25:21 ERROR> Sudo.pm:240 EBox::Sudo::_rootError - root command LANG=C /usr/sbin/ejabberdctl status failed.

Jabber is not turned on for me, I tried to turn it on, this did not work. I do not get anywhere here.

Thanks in advance

10
Other modules / [Solved] Problems saving network data
« on: April 10, 2022, 11:42:59 am »
ZENTYAL Version: 6.1.6

Hello, I need your help when I want to save changes e.g. of the following data:

VPN
HTTP-Proxy
Firewall
IPsec

then I get the following message:

Einige Module meldeten ein Fehler beim Sichern der Änderungen. Weitere Informationen finden Sie in den Logs in /var/log/zentyal/
The following modules failed while saving their changes, their state is unknown: network

and in the Zentral.log I then find the following message:

2022/04/09 19:16:25 INFO> DHCP.pm:1168 EBox::DHCP::_setDHCPConf - Checking by config of DDNS for dhcp dns and samba
2022/04/09 19:16:25 INFO> DHCP.pm:1193 EBox::DHCP::_createUserDhcpdUser - Creating dhcpduser for dynamic dns DON'T NEED, ignore step.
2022/04/09 19:16:27 ERROR> GlobalImpl.pm:727 EBox::GlobalImpl::saveAllModules - The following modules failed while saving their changes, their state is unknown: network  at The following modules failed while saving their changes, their state is unknown: network  at /usr/share/perl5/EBox/GlobalImpl.pm line 727
EBox::GlobalImpl::saveAllModules('EBox::GlobalImpl=HASH(0x560af8b61e78)', 'progress', 'EBox::ProgressIndicator=HASH(0x560af497d698)') called at /usr/share/perl5/EBox/Global.pm line 95
EBox::Global::AUTOLOAD('EBox::Global=HASH(0x560af49a0060)', 'progress', 'EBox::ProgressIndicator=HASH(0x560af497d698)') called at /usr/share/zentyal/global-action line 32
eval {...} at /usr/share/zentyal/global-action line 30
2022/04/09 19:16:46 ERROR> Sudo.pm:240 EBox::Sudo::_rootError - root command LANG=C /usr/sbin/ejabberdctl status failed.
2022/04/09 19:17:15 ERROR> Sudo.pm:240 EBox::Sudo::_rootError - root command LANG=C /usr/sbin/ejabberdctl status failed.
2022/04/09 19:17:45 ERROR> Sudo.pm:240 EBox::Sudo::_rootError - root command LANG=C /usr/sbin/ejabberdctl status failed.
2022/04/09 19:18:15 ERROR> Sudo.pm:240 EBox::Sudo::_rootError - root command LANG=C /usr/sbin/ejabberdctl status failed.
2022/04/09 19:18:45 ERROR> Sudo.pm:240 EBox::Sudo::_rootError - root command LANG=C /usr/sbin/ejabberdctl status failed.
2022/04/09 19:19:12 ERROR> Sudo.pm:240 EBox::Sudo::_rootError - root command LANG=C /usr/sbin/ejabberdctl status failed.
2022/04/09 19:19:16 INFO> Index.pm:187 EBox::Dashboard::CGI::Index::masonParameters - dashboard1

I can unfortunately do nothing with this, can someone help me. Thanks in advance.

11
Hello under Email and Groupware / Sogo xml parse error is stored the solution for the problem. Thank you very much for the help, attached is the workaround to get ActiveSync working correctly again.

zs sogo stop
zs mail stop
wget http://us.archive.ubuntu.com/ubuntu/pool/main/e/expat/libexpat1_2.2.9-1build1_amd64.deb
dpkg -i libexpat1_2.2.9-1build1_amd64.deb
zs mail start
zs sogo start

MK

12
Hello, I have the same problem, but with version 6.1 Commercial Version of Zentyal after the update. I would like to switch to CardDAV for contacts and email, calendar works with CalDav (I have these problems only with IOS under MACOS everything works correctly), but here I always get an SSL error and get nowhere here. How must the Zentyal server be set up correctly, is there a tutorial for this. I have unfortunately found nothing. Or can you undo the update, so that ActiveSync works again.

Thanks MK

13
ZENTYAL 6.1 and MACOS.

I have the following problem. Under MACOS I can set up mails and it works fine, but I don't get the calendar and contacts included. After configuration I get a message that he can not check the user and password. Under IOS everything works perfectly. Has anyone here a solution how I can solve this problem under MACOS (BIGSUR). I have taken the email address or the username from the AD for the user, everything has not worked so far. I would be grateful for help. Many thanks in advance.
I used Outlook 2016/19 under MACOS with the same Problem + that I can't sent mails.

14
Installation and Upgrades / Re: Zentyal update failed, not boot.
« on: August 05, 2020, 04:59:41 pm »
Hello, can you tell me what you changed or how the server restarted, I have the same problem and can't get any further. Thank you very much in advance.

Greeting Mathias


15
Hello, a great tutorial, it worked immediately, with this I can now create backups. Thank you very much !

Pages: [1] 2