Messages

1

Installation and Upgrades / Re: unmet dependencies after Zentyal 6.2 installation (zentyal-antivirus)

« on: August 11, 2020, 09:49:53 pm »

Ok, so now, I have stopped these modules....
Antivirus, Mail, Domain services, Sogo...

i am wondering, that after clear installtion, i am not able to get this system workable. Every try crashed some module ... I have tried to install Zentyla 6.1 (it was workable before) but even this is not workable even when I do clear installation, I ame depressed :-(

2

Installation and Upgrades / Re: unmet dependencies after Zentyal 6.2 installation (zentyal-antivirus)

« on: August 07, 2020, 05:54:45 pm »

And within few minutes...

Code: [Select]

Aug 07 17:52:26 mailsvrz amavis[20350]: (20350-01-5) Checking: d_3Jzo62qXGT [127.0.0.1] <martin@treml.org> -> <josef@treml.org>
Aug 07 17:52:26 mailsvrz amavis[20350]: (20350-01-5) (!)connect to /var/run/clamav/clamd.ctl failed, attempt #1: Can't connect to a UNIX socket /var/run/clamav/clamd.ct
Aug 07 17:52:26 mailsvrz amavis[20350]: (20350-01-5) Clam Antivirus-clamd: All attempts (1) failed connecting to /var/run/clamav/clamd.ctl, retrying (1)
Aug 07 17:52:27 mailsvrz amavis[20350]: (20350-01-5) (!)connect to /var/run/clamav/clamd.ctl failed, attempt #1: Can't connect to a UNIX socket /var/run/clamav/clamd.ct
Aug 07 17:52:27 mailsvrz amavis[20350]: (20350-01-5) (!)Clam Antivirus-clamd: All attempts (1) failed connecting to /var/run/clamav/clamd.ctl, retrying (2)
Aug 07 17:52:33 mailsvrz amavis[20350]: (20350-01-5) (!)connect to /var/run/clamav/clamd.ctl failed, attempt #1: Can't connect to a UNIX socket /var/run/clamav/clamd.ct
Aug 07 17:52:33 mailsvrz amavis[20350]: (20350-01-5) (!)Clam Antivirus-clamd av-scanner FAILED: run_av error: Too many retries to talk to /var/run/clamav/clamd.ctl (All
Aug 07 17:52:33 mailsvrz amavis[20350]: (20350-01-5) (!)WARN: all primary virus scanners failed, considering backups
Aug 07 17:52:36 mailsvrz amavis[20351]: (20351-01-3) (!)Clam Antivirus - clamscan av-scanner FAILED: /usr/bin/clamscan KILLED, signal 9 (0009) at (eval 108) line 950.
Aug 07 17:52:36 mailsvrz amavis[20351]: (20351-01-3) (!!)AV: ALL VIRUS SCANNERS FAILED
~


3

Installation and Upgrades / Re: unmet dependencies after Zentyal 6.2 installation (zentyal-antivirus)

« on: August 07, 2020, 05:17:17 pm »

Hi Doncamilo,

currently I have only one module "STOPPED" (when i look via webadmin). When I try to check status like this

Code: [Select]

sudo systemctl status amavis

I get this info

Code: [Select]

mailsvr@mailsvrz:~$ sudo systemctl status amavis
● amavis.service - LSB: Starts amavisd-new mailfilter
   Loaded: loaded (/etc/init.d/amavis; generated)
   Active: active (running) since Fri 2020-08-07 16:58:59 CEST; 14min ago
     Docs: man:systemd-sysv-generator(8)
    Tasks: 3 (limit: 4327)
   CGroup: /system.slice/amavis.service
           ├─3145 /usr/sbin/amavisd-new (master)
           ├─3544 /usr/sbin/amavisd-new (virgin child)
           └─3545 /usr/sbin/amavisd-new (virgin child)

Aug 07 16:58:59 mailsvrz amavis[3145]: No decoder for       .rpm
Aug 07 16:58:59 mailsvrz amavis[3145]: No decoder for       .swf
Aug 07 16:58:59 mailsvrz amavis[3145]: No decoder for       .tar
Aug 07 16:58:59 mailsvrz amavis[3145]: No decoder for       .zoo
Aug 07 16:58:59 mailsvrz amavis[3145]: Using primary internal av scanner code for Clam Antivirus-clamd
Aug 07 16:58:59 mailsvrz amavis[3145]: Found secondary av scanner Clam Antivirus - clamscan at /usr/bin/clamscan
Aug 07 16:58:59 mailsvrz amavis[3145]: initializing Mail::SpamAssassin (0)
Aug 07 16:59:02 mailsvrz amavis[3185]: SA info: util: setuid: ruid=117 euid=117 rgid=125 125 egid=125 125
Aug 07 16:59:07 mailsvrz amavis[3145]: SpamControl: init_pre_fork on SpamAssassin done
Aug 07 16:59:07 mailsvrz amavis[3145]: extra modules loaded after daemonizing/chrooting: /etc/perl/Net/libnet.cfg, /usr/lib/x86_64-linux-gnu/perl5/5.26/auto/Net/SSLeay/
lines 1-20/20 (END)

SO I am confused now, is it workable or not? Could you advise what should I do now...

Thanks
Josef

4

Installation and Upgrades / Re: unmet dependencies after Zentyal 6.2 installation (zentyal-antivirus)

« on: August 05, 2020, 07:07:38 pm »

I am running clear installation core version 6.2.3, I didn´t make any change, just install modules within initial installation process. But after reboot these two modules stayed  in STOPPED status....

5

Installation and Upgrades / Re: unmet dependencies after Zentyal 6.2 installation (zentyal-antivirus)

« on: August 05, 2020, 04:08:37 pm »

Thanks for reply    this is how its look. I have clear installation, I didn´t make any change, but since I install antivir and mail filter, both modules are still STOPPED, below are statuses and records from log

Code: [Select]

Zentyal: status module antivirus:                       [ STOPPED ]

Code: [Select]

:~$ systemctl status bind9
● bind9.service - BIND Domain Name Server
   Loaded: loaded (/lib/systemd/system/bind9.service; enabled; vendor preset: enabled)
   Active: active (running) since Wed 2020-08-05 01:46:40 CEST; 14h ago
     Docs: man:named(8)
 Main PID: 1709 (named)
    Tasks: 8 (limit: 4327)
   CGroup: /system.slice/bind9.service
           └─1709 /usr/sbin/named -f -u bind -4


Code: [Select]

2020/08/05 01:02:43 ERROR> GlobalImpl.pm:653 EBox::GlobalImpl::saveAllModules - Failed to save changes in module samba: Failed to execute /usr/bin/sudo -p sudo: /var/lib/zentyal/tmp/OQ9hqXPvQT.cmd 2> /var/lib/zentyal/tmp/stderr
2020/08/05 01:02:43 INFO> Base.pm:231 EBox::Module::Base::save - Restarting service for module: mail
2020/08/05 01:02:43 INFO> Base.pm:231 EBox::Module::Base::save - Restarting service for module: mailfilter
2020/08/05 01:02:43 INFO> Base.pm:231 EBox::Module::Base::save - Restarting service for module: sogo
2020/08/05 01:02:43 ERROR> Base.pm:117 EBox::Exceptions::Base::throw - Failed to execute /usr/bin/sudo -p sudo: /var/lib/zentyal/tmp/jI7MrbOnu1.cmd 2> /var/lib/zentyal/tmp/stderr at Failed to execute /usr/bin/sudo -p sudo: /var/lib/zentyal/tmp/jI7MrbOnu1.cmd 2> /var/lib/zentyal/tmp/stderr at /usr/share/perl5/EBox/Sudo.pm line 221
EBox::Sudo::_rootError('/usr/bin/sudo -p sudo: /var/lib/zentyal/tmp/jI7MrbOnu1.cmd 2> /var/lib/zentyal/tmp/stderr', 'set -e^J/bin/mv /var/lib/zentyal/tmp/fY8shraVgp \'/etc/default/sogo\'^J/bin/chmod 755 \'/etc/default/sogo\'^J/bin/chown 0.0 \'/etc/default/sogo\'', -1, 'ARRAY(0x5594a5b58070)', 'ARRAY(0x5594a5b58088)') called at /usr/share/perl5/EBox/Sudo.pm line 210
EBox::Sudo::_root(1, '/bin/mv /var/lib/zentyal/tmp/fY8shraVgp \'/etc/default/sogo\'', '/bin/chmod 755 \'/etc/default/sogo\'', '/bin/chown 0.0 \'/etc/default/sogo\'') called at /usr/share/perl5/EBox/Sudo.pm line 153
EBox::Sudo::root('/bin/mv /var/lib/zentyal/tmp/fY8shraVgp \'/etc/default/sogo\'', '/bin/chmod 755 \'/etc/default/sogo\'', '/bin/chown 0.0 \'/etc/default/sogo\'') called at /usr/share/perl5/EBox/Module/Base.pm line 1063
EBox::Module::Base::_writeFileSave('/var/lib/zentyal/tmp/fY8shraVgp', '/etc/default/sogo', 'HASH(0x55949ecce820)') called at /usr/share/perl5/EBox/Module/Base.pm line 1142
EBox::Module::Base::writeConfFileNoCheck('/etc/default/sogo', 'sogo/sogo.mas', 'ARRAY(0x5594a3f76308)', 'HASH(0x55949ecce820)') called at /usr/share/perl5/EBox/Module/Service.pm line 1022
EBox::Module::Service::writeConfFile('EBox::SOGo=HASH(0x5594a52d9148)', '/etc/default/sogo', 'sogo/sogo.mas', 'ARRAY(0x5594a3f76308)', 'HASH(0x55949ecce820)') called at /usr/share/perl5/EBox/SOGo.pm line 227
EBox::SOGo::_writeSOGoDefaultFile('EBox::SOGo=HASH(0x5594a52d9148)') called at /usr/share/perl5/EBox/SOGo.pm line 98
EBox::SOGo::_setConf('EBox::SOGo=HASH(0x5594a52d9148)') called at /usr/share/perl5/EBox/Module/Base.pm line 995
EBox::Module::Base::_regenConfig('EBox::SOGo=HASH(0x5594a52d9148)') called at /usr/share/perl5/EBox/Module/Service.pm line 940
EBox::Module::Service::_regenConfig('EBox::SOGo=HASH(0x5594a52d9148)') called at /usr/share/perl5/EBox/Module/Base.pm line 234


2020/08/05 01:02:43 ERROR> GlobalImpl.pm:653 EBox::GlobalImpl::saveAllModules - Failed to save changes in module sogo: Failed to execute /usr/bin/sudo -p sudo: /var/lib/zentyal/tmp/jI7MrbOnu1.cmd 2> /var/lib/zentyal/tmp/stderr
2020/08/05 01:02:43 INFO> Base.pm:231 EBox::Module::Base::save - Restarting service for module: logs
2020/08/05 01:02:48 ERROR> Service.pm:43 EBox::Service::manage - No such daemon: zentyal.loggerd at No such daemon: zentyal.loggerd at /usr/share/perl5/EBox/Service.pm line 43
EBox::Service::manage('zentyal.loggerd', 'start') called at /usr/share/perl5/EBox/Module/Service.pm line 746
EBox::Module::Service::_manageDaemon('EBox::Logs=HASH(0x5594a3ab0348)', 'HASH(0x5594a5b45808)', 'start') called at /usr/share/perl5/EBox/Module/Service.pm line 728
EBox::Module::Service::_startDaemon('EBox::Logs=HASH(0x5594a3ab0348)', 'HASH(0x5594a5b45808)') called at /usr/share/perl5/EBox/Module/Service.pm line 772
EBox::Module::Service::_manageService('EBox::Logs=HASH(0x5594a3ab0348)', 'start') called at /usr/share/perl5/EBox/Module/Service.pm line 797
EBox::Module::Service::_startService('EBox::Logs=HASH(0x5594a3ab0348)') called at /usr/share/perl5/EBox/Module/Service.pm line 996
EBox::Module::Service::_enforceServiceState('EBox::Logs=HASH(0x5594a3ab0348)') called at /usr/share/perl5/EBox/Module/Service.pm line 947
EBox::Module::Service::_regenConfig('EBox::Logs=HASH(0x5594a3ab0348)') called at /usr/share/perl5/EBox/Module/Base.pm line 234
eval {...} at /usr/share/perl5/EBox/Module/Base.pm line 233

2020/08/05 01:02:49 ERROR> Firewall.pm:207 EBox::Firewall::_enforceServiceState - Error restarting firewall: Failed to execute /usr/bin/sudo -p sudo: /var/lib/zentyal/tmp/STeBGFmfFF.cmd 2> /var/lib/zentyal/tmp/stderr
2020/08/05 01:02:49 INFO> Base.pm:231 EBox::Module::Base::save - Restarting service for module: sysinfo
2020/08/05 01:02:50 ERROR> Base.pm:117 EBox::Exceptions::Base::throw - Failed to execute /usr/bin/sudo -p sudo: /var/lib/zentyal/tmp/KA0kZufIj_.cmd 2> /var/lib/zentyal/tmp/stderr at Failed to execute /usr/bin/sudo -p sudo: /var/lib/zentyal/tmp/KA0kZufIj_.cmd 2> /var/lib/zentyal/tmp/stderr at /usr/share/perl5/EBox/Sudo.pm line 221
EBox::Sudo::_rootError('/usr/bin/sudo -p sudo: /var/lib/zentyal/tmp/KA0kZufIj_.cmd 2> /var/lib/zentyal/tmp/stderr', 'set -e^Jecho Europe/Prague > /etc/timezone^Jln -sf /usr/share/zoneinfo/Europe/Prague /etc/localtime', -1, 'ARRAY(0x5594a5beeb18)', 'ARRAY(0x5594a5bae878)') called at /usr/share/perl5/EBox/Sudo.pm line 210
EBox::Sudo::_root(1, 'echo Europe/Prague > /etc/timezone', 'ln -sf /usr/share/zoneinfo/Europe/Prague /etc/localtime') called at /usr/share/perl5/EBox/Sudo.pm line 153
EBox::Sudo::root('echo Europe/Prague > /etc/timezone', 'ln -sf /usr/share/zoneinfo/Europe/Prague /etc/localtime') called at /usr/share/perl5/EBox/SysInfo.pm line 158
EBox::SysInfo::_setConf('EBox::SysInfo=HASH(0x5594a2ed7738)') called at /usr/share/perl5/EBox/Module/Base.pm line 995
EBox::Module::Base::_regenConfig('EBox::SysInfo=HASH(0x5594a2ed7738)') called at /usr/share/perl5/EBox/Module/Base.pm line 234
eval {...} at /usr/share/perl5/EBox/Module/Base.pm line 233
EBox::Module::Base::save('EBox::SysInfo=HASH(0x5594a2ed7738)') called at /usr/share/perl5/EBox/GlobalImpl.pm line 649
eval {...} at /usr/share/perl5/EBox/GlobalImpl.pm line 648
EBox::GlobalImpl::saveAllModules('EBox::GlobalImpl=HASH(0x55949f728ac0)', 'progress', 'EBox::ProgressIndicator=HASH(0x5594a2dddb38)') called at /usr/share/perl5/EBox/Global.pm line 95
EBox::Global::AUTOLOAD('EBox::Global=HASH(0x5594a2e9f7b0)', 'progress', 'EBox::ProgressIndicator=HASH(0x5594a2dddb38)') called at /usr/share/zentyal/global-action line 32
eval {...} at /usr/share/zentyal/global-action line 30



6

Installation and Upgrades / Re: unmet dependencies after Zentyal 6.2 installation (zentyal-antivirus)

« on: August 05, 2020, 08:32:48 am »

Hi doncamilo,

thank you for reply. I don´t have broken packages. I just checked it with "dpkg -l | grep -Ev '^(ii|rc)'
", mailfilter nad antivirus are still stopped.

Josef

7

Installation and Upgrades / Re: unmet dependencies after Zentyal 6.2 installation (zentyal-antivirus)

« on: July 30, 2020, 03:05:14 pm »

Hi guys,

is there any progress? I just upgraded Zentyal to 6.2.3 but when I install Antivir 6.2.1 and Mail Filter 6.2.0 both modules are still "STOPPED". Do you have some workable solution ?

Thanks
Josef

8

Email and Groupware / Reindex INBOX folder

« on: July 07, 2020, 07:48:49 pm »

Hi all,

is it possible to somehow manualy reindex user INBOX folder? One user reached email quota, so I increased his quota, but now I don´t see emails, which were delivered within time, when the user had full inbox (i see it in mail log, zentyal said delivered, so I think I should be able to see in inbox folder). These emails are not shown in user mailbox....

Any ideas?

Thanks
Josef