Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
76
Installation and Upgrades / Re: OpenChange not work
« on: January 03, 2014, 08:47:39 pm »
Good evening,
With regards to the OpenChange failure you experiment with Zentyal, can you enable the debugging in
System -> Debug and check the box.
This would send us apport report upon significant openchange failure you might encounter.
Br,
Julien.
With regards to the OpenChange failure you experiment with Zentyal, can you enable the debugging in
System -> Debug and check the box.
This would send us apport report upon significant openchange failure you might encounter.
Br,
Julien.
77
Installation and Upgrades / Re: Zentyal 3.3 you have held broken packages!
« on: January 03, 2014, 07:19:10 pm »That's mean Zentyal Server will be always belated over Ubuntu at least 4 months, does it?
Yes. More or less.
if that so; Zentyal Server 3.4 will release at Feb. 2014, does it?
No. Zentyal Server 3.4 development will be frozen on mid Feb 2014, but will be released on March, 15th 2014: http://www.zentyal.org/roadmap/zentyal-3-4-roadmap/
Br,
Julien.
78
Installation and Upgrades / Re: Zentyal 3.3 you have held broken packages!
« on: January 03, 2014, 07:14:12 pm »Hi!
I have the same problem with 12.04.3 LTS, when I want to install zentyal-all.
When I choose packages, I cannot install zentyal-openchangeand zentyal-bandwithmonitor, because of unmelt depenencies problems.
See also my posting: http://forum.zentyal.org/index.php/topic,19519.0.html
Hi Michael,
Should be fixed for zentyal-openchange too now.
Br,
Julien.
79
Installation and Upgrades / Re: Cannot Install OpenChangeServer - Error with dependencies problem occured
« on: January 03, 2014, 06:43:12 pm »
Problem fixed.
This was caused by the sope packages in our repo.
Br,
Julien.
This was caused by the sope packages in our repo.
Br,
Julien.
80
Installation and Upgrades / Re: Cannot Install OpenChangeServer - Error with dependencies problem occured
« on: January 03, 2014, 06:01:13 pm »
Good afternoon,
We have reproduced this issue in our testing environment and we presume the problem shall have been caused by a recent upgrade of Ubuntu packages. We are currently investigating the issue - targeting a fix asap. You can follow the updates in the following trac ticket:
http://trac.zentyal.org/ticket/7952
Br,
Julien.
We have reproduced this issue in our testing environment and we presume the problem shall have been caused by a recent upgrade of Ubuntu packages. We are currently investigating the issue - targeting a fix asap. You can follow the updates in the following trac ticket:
http://trac.zentyal.org/ticket/7952
Br,
Julien.
81
Installation and Upgrades / Re: Zentyal 3.3 you have held broken packages!
« on: December 29, 2013, 11:38:43 pm »
Hi,
Actually the policy applies but the online documentation presumably requires an update.
It states that next community edition will be based over new Ubuntu standard release (non LTS) if and only if the Ubuntu release is available before the start of the new Zentyal development cycle. Zentyal server 3.3 development cycle has started on October 5th with Ubuntu 12.04.03 LTS. Zentyal Server 3.4 has started on December 16th and will be based over Ubuntu 13.10.
Br,
Julien.
Actually the policy applies but the online documentation presumably requires an update.
It states that next community edition will be based over new Ubuntu standard release (non LTS) if and only if the Ubuntu release is available before the start of the new Zentyal development cycle. Zentyal server 3.3 development cycle has started on October 5th with Ubuntu 12.04.03 LTS. Zentyal Server 3.4 has started on December 16th and will be based over Ubuntu 13.10.
Br,
Julien.
82
Installation and Upgrades / Re: zentyal 3.3 and openchange external email address issue
« on: December 20, 2013, 03:21:22 pm »
It does work and was tested with Microsoft Outlook 2003 and Microsoft Outlook 2007.
Br,
Julien.
Br,
Julien.
83
Installation and Upgrades / Re: zentyal 3.3 and openchange external email address issue
« on: December 20, 2013, 01:03:43 pm »hi, got the new one up (zentyal 3.3 full release) and running but cant currently connect to it, keeps saying the server cant be found, after i get that sorted i will try and let you know.
DNS issue?
Br,
Julien.
84
Installation and Upgrades / Re: Webmail Tasks
« on: December 19, 2013, 04:09:25 pm »
Hi,
Webmail Tasks have been implemented in roundcube and are targeted to enter master + be included in nightly packages in the short future. http://www.zentyal.org/roadmap/zentyal-3-4-roadmap/
Br,
Julien
Webmail Tasks have been implemented in roundcube and are targeted to enter master + be included in nightly packages in the short future. http://www.zentyal.org/roadmap/zentyal-3-4-roadmap/
Br,
Julien
85
Installation and Upgrades / Re: SOGo WWW
« on: December 19, 2013, 04:06:02 pm »
We disable SOGo Web UI by default because we are providing a Roundcube interface in place of SOGo default one.
If you are however specifically looking for this UI, there is no restrictions. You just need to do it manually.
Br,
Julien.
If you are however specifically looking for this UI, there is no restrictions. You just need to do it manually.
Br,
Julien.
86
Installation and Upgrades / Re: Incorrect password upon login on openchange
« on: December 19, 2013, 04:03:49 pm »
Hi,
Your samba.log and zentyal.log would be helpful for us to provide you a better diagnostic.
Your samba.log and zentyal.log would be helpful for us to provide you a better diagnostic.
87
Installation and Upgrades / Re: zentyal 3.3 and openchange external email address issue
« on: December 19, 2013, 03:53:23 pm »
Do you experience this issue with the new Zentyal Server 3.3 release?
Br,
Julien.
Br,
Julien.
88
Installation and Upgrades / Re: Incorrect password upon login on openchange
« on: December 18, 2013, 01:15:18 pm »
Hi,
You need to grant access to OpenChange for the user prior you can log through roundcube or Outlook. Unless you do so, the user is in the Active Directory but is not granted access to Microsoft Exchange compatible services (webmail with openchange modules included).
Follow Step 2 of the following guide:
http://labs.zentyal.org/part-ii-install-configure-zentyals-technology-preview-of-native-ms-exchange-replacement/
If you want to enable OpenChange by default for any newly created user, you can adjust the OpenChange account directly from the user template.
Does this help/Fix your problem?
Br,
Julien.
You need to grant access to OpenChange for the user prior you can log through roundcube or Outlook. Unless you do so, the user is in the Active Directory but is not granted access to Microsoft Exchange compatible services (webmail with openchange modules included).
Follow Step 2 of the following guide:
http://labs.zentyal.org/part-ii-install-configure-zentyals-technology-preview-of-native-ms-exchange-replacement/
If you want to enable OpenChange by default for any newly created user, you can adjust the OpenChange account directly from the user template.
Does this help/Fix your problem?
Br,
Julien.
89
Installation and Upgrades / Re: Zentyal 3.3 and openchange issues
« on: December 02, 2013, 11:03:47 am »
Any updates?
If none, I would mark the topic as solved.
Br,
Julien.
If none, I would mark the topic as solved.
Br,
Julien.
90
Installation and Upgrades / Re: Openchange & Outlook
« on: December 02, 2013, 11:02:43 am »
Any updates?
If none, I would mark the topic as solved given that the status is "works for me".
Br,
Julien.
If none, I would mark the topic as solved given that the status is "works for me".
Br,
Julien.