Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
1
Installation and Upgrades / DHCP on 5 ethernet with mac filternig does not work
« on: September 28, 2014, 01:33:44 pm »
OK, so here is the setup
Zentyal 3.5.3
modules installed :
Network
Firewall
DHCP
DNS
Events
IPsec
Logs
NTP
VPN
Traffic Shaping
ip setup:
eth0-eth6 LAN IP and eth7 wan
eth0 10.0.0.138
eth1 100.10.11.1
eth2 100.10.12.1
eth3 100.10.13.1
eth4 100.10.14.1
eth5 100.10.15.1
eth6 100.10.16.1
on eth0 and eth1 i have objects created and asigned to dhcp for a few pc-s
un eth6 i have dhcp defined and range 100.10.16.2 to 250
nou the problem is that my clients defined in objects with mac and ip get almost all tim ip-s from eth6 ( 100.10.16.x.)
am i missing something??
in the log 00:1D:72:A0:CC:9E should get ip from eth0 ( 10.0.0.x) not from eth6 ( 100.10.16.x ) as defined in objects
Zentyal 3.5.3
modules installed :
Network
Firewall
DHCP
DNS
Events
IPsec
Logs
NTP
VPN
Traffic Shaping
ip setup:
eth0-eth6 LAN IP and eth7 wan
eth0 10.0.0.138
eth1 100.10.11.1
eth2 100.10.12.1
eth3 100.10.13.1
eth4 100.10.14.1
eth5 100.10.15.1
eth6 100.10.16.1
on eth0 and eth1 i have objects created and asigned to dhcp for a few pc-s
un eth6 i have dhcp defined and range 100.10.16.2 to 250
nou the problem is that my clients defined in objects with mac and ip get almost all tim ip-s from eth6 ( 100.10.16.x.)
am i missing something??
in the log 00:1D:72:A0:CC:9E should get ip from eth0 ( 10.0.0.x) not from eth6 ( 100.10.16.x ) as defined in objects
2
Installation and Upgrades / Add aditional HDD to Zentyal
« on: January 09, 2014, 06:09:18 pm »
Hello, i have zentyal nice and going for a few weeks
It is configured as a file server, giving shares for diferent users
My problem is that i am starting to run out of space
I have atached another hdd to the pc
How do i atache it to zentyal?
From the web GUI?
Any help apriciated
I am a little new to linux
It is configured as a file server, giving shares for diferent users
My problem is that i am starting to run out of space
I have atached another hdd to the pc
How do i atache it to zentyal?
From the web GUI?
Any help apriciated
I am a little new to linux
3
News and Announcements / Re: Zentyal 3.3 available!
« on: December 18, 2013, 11:00:35 pm »
OK support
now i have a new problem
After doing a restar of zentyal, i get internal server error........
I cannot log on from https,
when i try to log in directly to the zentyal machine, i imput my user and pasword, and it keeps asking for my credentials in a loop
My setup is:
VmVare machine
2 cpu
2 gb ram
30 gb hdd
1 wan card e 1000
7 lan card vmxnet3
now i have a new problem
After doing a restar of zentyal, i get internal server error........
I cannot log on from https,
when i try to log in directly to the zentyal machine, i imput my user and pasword, and it keeps asking for my credentials in a loop
My setup is:
VmVare machine
2 cpu
2 gb ram
30 gb hdd
1 wan card e 1000
7 lan card vmxnet3
4
Installation and Upgrades / Zentyal open bpn and ddwrt
« on: December 18, 2013, 09:49:50 pm »
Can anyone confirm that it can use a ddwrt based rooter as a client to zentyal openvpn?
I ask as it would be nice to set this up, so my home network to be in vpn with my work
I now have 3 rooters at home trying to set this up, but no luck so far
I ask as it would be nice to set this up, so my home network to be in vpn with my work
I now have 3 rooters at home trying to set this up, but no luck so far
5
News and Announcements / Re: Zentyal 3.3 available!
« on: December 17, 2013, 04:41:29 pm »
Thank you support team!!!!
With the core update, i confirm that open VPN is working as should, flawlesly
......... to think, for a free software, support is faster then Microsoft TMG.......
With the core update, i confirm that open VPN is working as should, flawlesly
......... to think, for a free software, support is faster then Microsoft TMG.......
6
News and Announcements / Re: Zentyal 3.3 available!
« on: December 17, 2013, 12:22:58 pm »Hi holtandrei,
The download bundle regression is already fixed in Git: https://github.com/Zentyal/zentyal/pull/846
A new package with the fix will be released soon, but if you can't wait you can apply the patch already:Code: [Select]wget https://raw.github.com/Zentyal/zentyal/master/main/core/src/EBox/CGI/Controller/DataTable.pm
sudo mv DataTable.pm /usr/share/perl5/EBox/CGI/Controller/
wget https://raw.github.com/Zentyal/zentyal/master/main/core/www/js/table-helper.js
sudo mv table-helper.js /usr/share/zentyal/www/js/
sudo service zentyal webadmin restart
Ok, how muchfor the update in zentyal? More then a few days?
7
News and Announcements / Re: Zentyal 3.3 available!
« on: December 17, 2013, 09:55:22 am »
I have installed 3.3 from scrach
All fine except, openvpn
If i click the download client bundel, nothing hapenes...
I cannot ad client to older ver of zentyal in our other location, ver 3.2
Except these all fine
But i will instal the older version, because wee need site 2 site vpn
All fine except, openvpn
If i click the download client bundel, nothing hapenes...
I cannot ad client to older ver of zentyal in our other location, ver 3.2
Except these all fine
But i will instal the older version, because wee need site 2 site vpn
8
Installation and Upgrades / Re: VPN betwene 2 offices and client not working
« on: November 24, 2013, 06:32:35 pm »
office a can access office b, and viceversa
vpn client if conects to office b , can see only office b, if conects to office a, can see only office a
If same client conects by l2tp to office b, can see B and A
My gues is that i have to give IP adresses to OPEN VPN, in the sam supnet i have phisical interface, and only use that subnet for open VPN
I will try this tomorrow, wil add 1 extra lan card from ESXI to Zentyal and try it again, update as i succeede
vpn client if conects to office b , can see only office b, if conects to office a, can see only office a
If same client conects by l2tp to office b, can see B and A
My gues is that i have to give IP adresses to OPEN VPN, in the sam supnet i have phisical interface, and only use that subnet for open VPN
I will try this tomorrow, wil add 1 extra lan card from ESXI to Zentyal and try it again, update as i succeede
9
Installation and Upgrades / VPN betwene 2 offices and client not working
« on: November 24, 2013, 05:11:40 pm »
Ok, i got the setup like in the atachment, VPN betwene offices work's like a charm
Is it possible that my client, winch conects to Home Office A by vpn, to access the remote office B?
VPN used is OPEN VPN
Is it possible that my client, winch conects to Home Office A by vpn, to access the remote office B?
VPN used is OPEN VPN
10
News and Announcements / Re: Zentyal 3.2 available!
« on: November 23, 2013, 07:09:48 pm »
I want to congradulate the Zentyal TEAM, for a LINUX based SBS is the best, especialy for me, comming from Microsoft based servers ( ISA and TMG )
If you could manage to have a Reverse Proxy module and DNS sync, it will decimate all
No problems upgrading from 3.0 ( x64 )
Zentyal is installed as a VM - works like a charm ( 2 cpu-s and 2 gb ram )
If you could manage to have a Reverse Proxy module and DNS sync, it will decimate all
No problems upgrading from 3.0 ( x64 )
Zentyal is installed as a VM - works like a charm ( 2 cpu-s and 2 gb ram )
11
Installation and Upgrades / Re: DNS replication
« on: November 23, 2013, 06:58:14 pm »
Yes, I would defenetly appreciate this
12
Installation and Upgrades / Re: Cannot Acess internal mail server vrom internal lan-s
« on: November 22, 2013, 08:09:13 pm »
tracert 100.10.10.19 works
also, i have deleted everything, and started from scrach
same thing
i can acess mail from external, but not from local lan, any of them
Firewall keeps on droping the pakets, from all of my internal ip-s
as you can see 100.10.10.88 is my laptop, wich is rejected
from other ( external ip-s ) no problem
also, same thing goes for http trafic, i use a reverse proxy ( we gave 3 web servers )
if i want to access a web site inhttp, it always gives me zentyals http server, from external it works fine
also, i have deleted everything, and started from scrach
same thing
i can acess mail from external, but not from local lan, any of them
Firewall keeps on droping the pakets, from all of my internal ip-s
as you can see 100.10.10.88 is my laptop, wich is rejected
from other ( external ip-s ) no problem
also, same thing goes for http trafic, i use a reverse proxy ( we gave 3 web servers )
if i want to access a web site inhttp, it always gives me zentyals http server, from external it works fine
13
Installation and Upgrades / Cannot Acess internal mail server vrom internal lan-s
« on: November 14, 2013, 04:05:44 pm »
Hello, i am new to zentyal, it is a bit diffrent from Microsoft TMG
I have the next setup:
Zentyal installed in VM, 8 LAN cards, 1 WAN, 7 Internal LAN ( different ip classes )
WAN- 82.77.58.XX - WAN ISP
LAN1 - 100.10.10.0 - internal, used for servers
LAn2 - 192.168.0.0 - service pc
Lan3 - 192.168.1.0 - service pc
Lan3 - 192.168.50.0 - DHCP Clients
Lan4 - 192.168.51.0 - DHCP Clients
Lan5 - 192.168.52.0 - DHCP Clients
Lan6 - 192.168.53.0 - used vor VPN
Our mail server is in 100.10.10.19
i cann acess the mail server from WAN, but from LAN ( any of them no )
packet filtering Firewall is configured momentary with ANY - to allow all trafic in
Firewall has port redirection for 25,110,143, 465, 995 on TCP ( ports used by mail server ) and forwarded to 100.10.10.19
Port forwarding is from
On the log of zentyal i can see:
imput interface output interface source destination protocol source port destination port decision
eth4 blank 192.168.0.10 82.77.58.XX tcp xxxx 465 drop
Am i missing something??? ( except some brain power )
Can anyone help me??
I have the next setup:
Zentyal installed in VM, 8 LAN cards, 1 WAN, 7 Internal LAN ( different ip classes )
WAN- 82.77.58.XX - WAN ISP
LAN1 - 100.10.10.0 - internal, used for servers
LAn2 - 192.168.0.0 - service pc
Lan3 - 192.168.1.0 - service pc
Lan3 - 192.168.50.0 - DHCP Clients
Lan4 - 192.168.51.0 - DHCP Clients
Lan5 - 192.168.52.0 - DHCP Clients
Lan6 - 192.168.53.0 - used vor VPN
Our mail server is in 100.10.10.19
i cann acess the mail server from WAN, but from LAN ( any of them no )
packet filtering Firewall is configured momentary with ANY - to allow all trafic in
Firewall has port redirection for 25,110,143, 465, 995 on TCP ( ports used by mail server ) and forwarded to 100.10.10.19
Port forwarding is from
On the log of zentyal i can see:
imput interface output interface source destination protocol source port destination port decision
eth4 blank 192.168.0.10 82.77.58.XX tcp xxxx 465 drop
Am i missing something??? ( except some brain power )
Can anyone help me??
Pages: [1]