Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
1
Installation and Upgrades / Synchronization of home directories on the additional domain controller
« on: May 17, 2015, 11:17:26 pm »
Hello,
under "Computers and File Sharing" the wiki for version 4.0 and 4.1 states: "When the users are synchronized from the other controller, Zentyal will create their associated /home/<username>"
I could not reproduce this for both versions of Zentyal. What is wrong?
Greetings
under "Computers and File Sharing" the wiki for version 4.0 and 4.1 states: "When the users are synchronized from the other controller, Zentyal will create their associated /home/<username>"
I could not reproduce this for both versions of Zentyal. What is wrong?
Greetings
2
Installation and Upgrades / virtual email domain naming question
« on: September 27, 2011, 12:54:50 am »
Hello,
I installed a Zentyal System with Zarafa as a Small Business Server with dynamic IP address. I followed the HowTo of Handeich (eBox as mail gateway + smtpauth + fetchmail), where an internal domain "localhost" is used (in my case "company.local") and the addition of Mammut to map the internal mail-addresses to the external ones (with MX-record), for example company.com.
All works fine, except when an Outlook or Webaccess user is sending an invitation for a meeting to an external address. In this case a calendar file is attached to the email and in the ORGANIZER-mailto "user@company.local" is entered and not "user@company.com". When the external recipient click the "accept" button of his PIM, a reply is send back to the issuer, based on this ORGANIZER-mailto-address and not the return-path info of the email itself. Because "company.local" has no MX-record a "Mail Delivery Failure" occurs.
On a test server with the same config and dyn IP, I have entered "company.com" as internal virtual email domain name and bind it to zarafa. Sending mail, receiving mail, mail retrieval from Mail Service Provider of "company.com", receiving mail with meeting-invitations and accepting them on external Clients and getting the acceptance back, works without trouble.
Because I am no email guru, my question is: are there still some pitfalls I do not know of, when I name the internal virtual mail domain bound to zarafa with the same identifier as the external one with the MX-record bound to the server of my Mail Service Provider? Are there other solutions (static IP, I know of).
Greetings
I installed a Zentyal System with Zarafa as a Small Business Server with dynamic IP address. I followed the HowTo of Handeich (eBox as mail gateway + smtpauth + fetchmail), where an internal domain "localhost" is used (in my case "company.local") and the addition of Mammut to map the internal mail-addresses to the external ones (with MX-record), for example company.com.
All works fine, except when an Outlook or Webaccess user is sending an invitation for a meeting to an external address. In this case a calendar file is attached to the email and in the ORGANIZER-mailto "user@company.local" is entered and not "user@company.com". When the external recipient click the "accept" button of his PIM, a reply is send back to the issuer, based on this ORGANIZER-mailto-address and not the return-path info of the email itself. Because "company.local" has no MX-record a "Mail Delivery Failure" occurs.
On a test server with the same config and dyn IP, I have entered "company.com" as internal virtual email domain name and bind it to zarafa. Sending mail, receiving mail, mail retrieval from Mail Service Provider of "company.com", receiving mail with meeting-invitations and accepting them on external Clients and getting the acceptance back, works without trouble.
Because I am no email guru, my question is: are there still some pitfalls I do not know of, when I name the internal virtual mail domain bound to zarafa with the same identifier as the external one with the MX-record bound to the server of my Mail Service Provider? Are there other solutions (static IP, I know of).
Greetings
3
Installation and Upgrades / [SOLVED]reply to mails sent from Zentyal/Zarafa-Server
« on: January 14, 2011, 01:37:02 pm »
I named my virtual mail domain "localhost". And I use a smart host for sending emails and fetchmail to retrieve the mail for the users from their external mail accounts.
When a recepient gets a mail sent by the Zentyal/Zarafa-Server and the recepient wants to reply to this mail, where "sender: ebox-user@localhost" is entered, this address logically consistent cannot be resolved. How can I map the internal address to the external, to which the reply should be posted?
Consequently I would simply rename my virtual mail domain similar to the external mail account. Can this lead to inconsistencies?
What is the option under: 'Dashboard:Mail>General>Options>Server mailname' good for?
When a recepient gets a mail sent by the Zentyal/Zarafa-Server and the recepient wants to reply to this mail, where "sender: ebox-user@localhost" is entered, this address logically consistent cannot be resolved. How can I map the internal address to the external, to which the reply should be posted?
Consequently I would simply rename my virtual mail domain similar to the external mail account. Can this lead to inconsistencies?
What is the option under: 'Dashboard:Mail>General>Options>Server mailname' good for?
4
Installation and Upgrades / [SOLVED]access denied to documents in samba shares
« on: January 10, 2011, 12:55:35 pm »
Hello,
I am able to create a directory, create a document in it, can edit the document on creation and save it to the directory. But I cannot open it afterwards. I still am able to rename the directory and the document. The behaviour on XP-client and win7-client is the same.
The acl flag is set in /etc/fstab for "/".
Samba-version is: 3.4.9
The access rules for the directory and document look like:
drwxrwxr-x+ <ebox-user-1> __USERS__
-rwxrwxr---+ <ebox-user-1> __USERS__
Some more curious findings:
After creation of the document without editing it, I am able to open it again, but after edit, save and open it again, the "access denied" dialog pops up.
Greetings
compay
I am able to create a directory, create a document in it, can edit the document on creation and save it to the directory. But I cannot open it afterwards. I still am able to rename the directory and the document. The behaviour on XP-client and win7-client is the same.
The acl flag is set in /etc/fstab for "/".
Samba-version is: 3.4.9
The access rules for the directory and document look like:
drwxrwxr-x+ <ebox-user-1> __USERS__
-rwxrwxr---+ <ebox-user-1> __USERS__
Some more curious findings:
After creation of the document without editing it, I am able to open it again, but after edit, save and open it again, the "access denied" dialog pops up.
Greetings
compay
5
Installation and Upgrades / [SOLVED]vpn access obviously blacklisted by internet rooter
« on: January 07, 2011, 12:22:06 am »
Hello,
anytime, when I want to connect for a second time to the vpn-server of the eBox, the connection is not established. When I alter the dynamic IP of the client I get access afresh, but again not for the second time.
I suppose, the firewall of the internet router evaluates the vpn access as an attack and blacklists the source IP. But an attack should be denied also at the first attempt - right?
What are the alternate protocols and ports for UDP/1194 and how can I create two vpn instances with the vpn module of eBox? For example one for UDP and one for TCP?
Greetings
Compay
anytime, when I want to connect for a second time to the vpn-server of the eBox, the connection is not established. When I alter the dynamic IP of the client I get access afresh, but again not for the second time.
I suppose, the firewall of the internet router evaluates the vpn access as an attack and blacklists the source IP. But an attack should be denied also at the first attempt - right?
What are the alternate protocols and ports for UDP/1194 and how can I create two vpn instances with the vpn module of eBox? For example one for UDP and one for TCP?
Greetings
Compay
6
Installation and Upgrades / Zarafa and EBox
« on: January 04, 2011, 10:44:32 am »
Hello,
does Zarafa community version works together with eBox or only the licenced version of Zarafa?
A former installation with Zarafa community alone works with the Outlook connector, but now together with eBox I get the error message, that the server cannot connect to the licence service.
Greetings compay
does Zarafa community version works together with eBox or only the licenced version of Zarafa?
A former installation with Zarafa community alone works with the Outlook connector, but now together with eBox I get the error message, that the server cannot connect to the licence service.
Greetings compay
Pages: [1]