Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Tiago

Pages: 1 [2] 3 4 ... 9
16
Portuguese / Re: Conexão PPPoe
« on: September 13, 2020, 02:55:31 pm »
Estou seguindo a configuração deste link https://doc.zentyal.org/en/_images/iface_pppoe.png

17
Portuguese / Re: Conexão PPPoe
« on: September 13, 2020, 02:42:00 pm »
Sim o modem está em Bridge e está conectado diretamente na ETH2, ele recebe o IP 187.72.73.179  e cria o gateway ppp0/187.72.73.179, porém após isso ele para alguns serviços como o DHCP, a configuração está sendo feita via WEB.

18
Portuguese / Re: Conexão PPPoe
« on: September 12, 2020, 01:21:52 am »
As configurações de Usuário e senha estão corretas, pois coloquei um roteador pra fazer a conexão PPPoe e funcionou perfeitamente, segue abaixo parte do Log de erros:

Restarting service for module: firewall
2020/08/30 11:51:03 ERROR> Sudo.pm:240 EBox::Sudo::_rootError - root command /sbin/iptables -t mangle -A FAILOVER-TEST --proto icmp --icmp-type echo-request -m string --algo bm  --string zfailovertest --dst ppp0/187.72.73.179 -j MARK --set-mark 2 failed.
Error output: iptables: No chain/target/match by that name.

Command output: .
Exit value: 1 at root command /sbin/iptables -t mangle -A FAILOVER-TEST --proto icmp --icmp-type echo-request -m string --algo bm  --string zfailovertest --dst ppp0/187.72.73.179 -j MARK --set-mark 2 failed.
Error output: iptables: No chain/target/match by that name.

Command output: .
Exit value: 1 at /usr/share/perl5/EBox/Sudo.pm line 240
EBox::Sudo::_rootError('/usr/bin/sudo -p sudo: /var/lib/zentyal/tmp/jZCg_SlgdO.cmd 2> /var/lib/zentyal/tmp/stderr', '/sbin/iptables -t mangle -A FAILOVER-TEST --proto icmp --icmp-type echo-request -m string --algo bm  --string zfailovertest --dst ppp0/187.72.73.179 -j MARK --set-mark 2', 256, 'ARRAY(0x558f99d73108)', 'ARRAY(0x558f97af5360)') called at /usr/share/perl5/EBox/Sudo.pm line 210
EBox::Sudo::_root(1, '/sbin/iptables -t mangle -A FAILOVER-TEST --proto icmp --icmp-type echo-request -m string --algo bm  --string zfailovertest --dst ppp0/187.72.73.179 -j MARK --set-mark 2') called at /usr/share/perl5/EBox/Sudo.pm line 153
EBox::Sudo::root('/sbin/iptables -t mangle -A FAILOVER-TEST --proto icmp --icmp-type echo-request -m string --algo bm  --string zfailovertest --dst ppp0/187.72.73.179 -j MARK --set-mark 2') called at /usr/share/zentyal-network/failover-checker line 323
main::_setIptablesRule('gtw5', 1, 'gw_ping', 'ppp0/187.72.73.179') called at /usr/share/zentyal-network/failover-checker line 246
main::_testRule('EBox::Model::Row=HASH(0x558f99c088e8)') called at /usr/share/zentyal-network/failover-checker line 54
2020/08/30 11:51:09 INFO> Service.pm:965 EBox::Module::Service::restartService - Restarting service for module: firewall
2020/08/30 11:51:10 ERROR> Sudo.pm:240 EBox::Sudo::_rootError - root command /usr/share/zentyal/unblock-exec /sbin/ifup --force -i /etc/network/interfaces zentyal-ppp-eth2 failed.
Error output: ethtool: bad command line argument(s)
 For more information run ethtool -h
 run-parts: /etc/network/if-up.d/ethtool exited with return code 1

Command output: Plugin rp-pppoe.so loaded.
 Failed to bring up zentyal-ppp-eth2.
.
Exit value: 1 at root command /usr/share/zentyal/unblock-exec /sbin/ifup --force -i /etc/network/interfaces zentyal-ppp-eth2 failed.
Error output: ethtool: bad command line argument(s)
 For more information run ethtool -h
 run-parts: /etc/network/if-up.d/ethtool exited with return code 1

Command output: Plugin rp-pppoe.so loaded.
 Failed to bring up zentyal-ppp-eth2.
.
Exit value: 1 at /usr/share/perl5/EBox/Sudo.pm line 240
EBox::Sudo::_rootError('/usr/bin/sudo -p sudo: /var/lib/zentyal/tmp/dXIFNPClSG.cmd 2> /var/lib/zentyal/tmp/stderr', '/usr/share/zentyal/unblock-exec /sbin/ifup --force -i /etc/network/interfaces zentyal-ppp-eth2', 256, 'ARRAY(0x55c05386c610)', 'ARRAY(0x55c050325b90)') called at /usr/share/perl5/EBox/Sudo.pm line 210
EBox::Sudo::_root(1, '/usr/share/zentyal/unblock-exec /sbin/ifup --force -i /etc/network/interfaces zentyal-ppp-eth2') called at /usr/share/perl5/EBox/Sudo.pm line 153
EBox::Sudo::root('/usr/share/zentyal/unblock-exec /sbin/ifup --force -i /etc/network/interfaces zentyal-ppp-eth2') called at /usr/share/perl5/EBox/Network.pm line 3737
EBox::Network::_enforceServiceState('EBox::Network=HASH(0x55c0524b2480)') called at /usr/share/perl5/EBox/Module/Service.pm line 947
EBox::Module::Service::_regenConfig('EBox::Network=HASH(0x55c0524b2480)') called at /usr/share/perl5/EBox/Module/Base.pm line 234
eval {...} at /usr/share/perl5/EBox/Module/Base.pm line 233
EBox::Module::Base::save('EBox::Network=HASH(0x55c0524b2480)') called at /usr/share/perl5/EBox/GlobalImpl.pm line 649
eval {...} at /usr/share/perl5/EBox/GlobalImpl.pm line 648
EBox::GlobalImpl::saveAllModules('EBox::GlobalImpl=HASH(0x55c0523f3f88)', 'progress', 'EBox::ProgressIndicator=HASH(0x55c04ea11b08)') called at /usr/share/perl5/EBox/Global.pm line 95
EBox::Global::AUTOLOAD('EBox::Global=HASH(0x55c0522f0900)', 'progress', 'EBox::ProgressIndicator=HASH(0x55c04ea11b08)') called at /usr/share/zentyal/global-action line 32
eval {...} at /usr/share/zentyal/global-action line 30
2020/08/30 11:51:10 ERROR> GlobalImpl.pm:653 EBox::GlobalImpl::saveAllModules - Failed to save changes in module network: root command /usr/share/zentyal/unblock-exec /sbin/ifup --force -i /etc/network/interfaces zentyal-ppp-eth2 failed.
Error output: ethtool: bad command line argument(s)
 For more information run ethtool -h
 run-parts: /etc/network/if-up.d/ethtool exited with return code 1

Command output: Plugin rp-pppoe.so loaded.
 Failed to bring up zentyal-ppp-eth2.
.
Exit value: 1
2020/08/30 11:51:10 INFO> Base.pm:231 EBox::Module::Base::save - Restarting service for module: antivirus
2020/08/30 11:51:12 INFO> Base.pm:231 EBox::Module::Base::save - Restarting service for module: dhcp
2020/08/30 11:51:14 INFO> Base.pm:231 EBox::Module::Base::save - Restarting service for module: openvpn
2020/08/30 11:51:15 INFO> Base.pm:231 EBox::Module::Base::save - Restarting service for module: firewall
2020/08/30 11:51:15 ERROR> GlobalImpl.pm:728 EBox::GlobalImpl::saveAllModules - The following modules failed while saving their changes, their state is unknown: network  at The following modules failed while saving their changes, their state is unknown: network  at /usr/share/perl5/EBox/GlobalImpl.pm line 728
EBox::GlobalImpl::saveAllModules('EBox::GlobalImpl=HASH(0x55c0523f3f88)', 'progress', 'EBox::ProgressIndicator=HASH(0x55c04ea11b08)') called at /usr/share/perl5/EBox/Global.pm line 95
EBox::Global::AUTOLOAD('EBox::Global=HASH(0x55c0522f0900)', 'progress', 'EBox::ProgressIndicator=HASH(0x55c04ea11b08)') called at /usr/share/zentyal/global-action line 32
eval {...} at /usr/share/zentyal/global-action line 30
2020/08/30 11:51:20 INFO> Service.pm:965 EBox::Module::Service::restartService - Restarting service for module: firewall
2020/08/30 11:52:03 ERROR> Sudo.pm:240 EBox::Sudo::_rootError - root command /sbin/iptables -t mangle -A FAILOVER-TEST --proto icmp --icmp-type echo-request -m string --algo bm  --string zfailovertest --dst ppp0/187.72.73.179 -j MARK --set-mark 2 failed.
Error output: iptables: No chain/target/match by that name.

Command output: .
Exit value: 1 at root command /sbin/iptables -t mangle -A FAILOVER-TEST --proto icmp --icmp-type echo-request -m string --algo bm  --string zfailovertest --dst ppp0/187.72.73.179 -j MARK --set-mark 2 failed.
Error output: iptables: No chain/target/match by that name.

Command output: .
Exit value: 1 at /usr/share/perl5/EBox/Sudo.pm line 240
EBox::Sudo::_rootError('/usr/bin/sudo -p sudo: /var/lib/zentyal/tmp/SeYjcQYgUz.cmd 2> /var/lib/zentyal/tmp/stderr', '/sbin/iptables -t mangle -A FAILOVER-TEST --proto icmp --icmp-type echo-request -m string --algo bm  --string zfailovertest --dst ppp0/187.72.73.179 -j MARK --set-mark 2', 256, 'ARRAY(0x55d9b49bd4e0)', 'ARRAY(0x55d9b273acd0)') called at /usr/share/perl5/EBox/Sudo.pm line 210
EBox::Sudo::_root(1, '/sbin/iptables -t mangle -A FAILOVER-TEST --proto icmp --icmp-type echo-request -m string --algo bm  --string zfailovertest --dst ppp0/187.72.73.179 -j MARK --set-mark 2') called at /usr/share/perl5/EBox/Sudo.pm line 153
EBox::Sudo::root('/sbin/iptables -t mangle -A FAILOVER-TEST --proto icmp --icmp-type echo-request -m string --algo bm  --string zfailovertest --dst ppp0/187.72.73.179 -j MARK --set-mark 2') called at /usr/share/zentyal-network/failover-checker line 323
main::_setIptablesRule('gtw5', 1, 'gw_ping', 'ppp0/187.72.73.179') called at /usr/share/zentyal-network/failover-checker line 246
main::_testRule('EBox::Model::Row=HASH(0x55d9b487b4e0)') called at /usr/share/zentyal-network/failover-checker line 54
2020/08/30 11:53:02 ERROR> Sudo.pm:240 EBox::Sudo::_rootError - root command /sbin/iptables -t mangle -A FAILOVER-TEST --proto icmp --icmp-type echo-request -m string --algo bm  --string zfailovertest --dst ppp0/187.72.73.179 -j MARK --set-mark 2 failed.
Error output: iptables: No chain/target/match by that name.

Command output: .
Exit value: 1 at root command /sbin/iptables -t mangle -A FAILOVER-TEST --proto icmp --icmp-type echo-request -m string --algo bm  --string zfailovertest --dst ppp0/187.72.73.179 -j MARK --set-mark 2 failed.
Error output: iptables: No chain/target/match by that name.

Command output: .
Exit value: 1 at /usr/share/perl5/EBox/Sudo.pm line 240
EBox::Sudo::_rootError('/usr/bin/sudo -p sudo: /var/lib/zentyal/tmp/s84du7tVgW.cmd 2> /var/lib/zentyal/tmp/stderr', '/sbin/iptables -t mangle -A FAILOVER-TEST --proto icmp --icmp-type echo-request -m string --algo bm  --string zfailovertest --dst ppp0/187.72.73.179 -j MARK --set-mark 2', 256, 'ARRAY(0x556d98a1ba58)', 'ARRAY(0x556d96798518)') called at /usr/share/perl5/EBox/Sudo.pm line 210
EBox::Sudo::_root(1, '/sbin/iptables -t mangle -A FAILOVER-TEST --proto icmp --icmp-type echo-request -m string --algo bm  --string zfailovertest --dst ppp0/187.72.73.179 -j MARK --set-mark 2') called at /usr/share/perl5/EBox/Sudo.pm line 153
EBox::Sudo::root('/sbin/iptables -t mangle -A FAILOVER-TEST --proto icmp --icmp-type echo-request -m string --algo bm  --string zfailovertest --dst ppp0/187.72.73.179 -j MARK --set-mark 2') called at /usr/share/zentyal-network/failover-checker line 323
main::_setIptablesRule('gtw5', 1, 'gw_ping', 'ppp0/187.72.73.179') called at /usr/share/zentyal-network/failover-checker line 246
main::_testRule('EBox::Model::Row=HASH(0x556d988b2178)') called at /usr/share/zentyal-network/failover-checker line 54
2020/08/30 11:54:02 ERROR> Sudo.pm:240 EBox::Sudo::_rootError - root command /sbin/iptables -t mangle -A FAILOVER-TEST --proto icmp --icmp-type echo-request -m string --algo bm  --string zfailovertest --dst ppp0/187.72.73.179 -j MARK --set-mark 2 failed.
Error output: iptables: No chain/target/match by that name.

Command output: .
Exit value: 1 at root command /sbin/iptables -t mangle -A FAILOVER-TEST --proto icmp --icmp-type echo-request -m string --algo bm  --string zfailovertest --dst ppp0/187.72.73.179 -j MARK --set-mark 2 failed.
Error output: iptables: No chain/target/match by that name.

Command output: .
Exit value: 1 at /usr/share/perl5/EBox/Sudo.pm line 240
EBox::Sudo::_rootError('/usr/bin/sudo -p sudo: /var/lib/zentyal/tmp/HNvTXAO_Ts.cmd 2> /var/lib/zentyal/tmp/stderr', '/sbin/iptables -t mangle -A FAILOVER-TEST --proto icmp --icmp-type echo-request -m string --algo bm  --string zfailovertest --dst ppp0/187.72.73.179 -j MARK --set-mark 2', 256, 'ARRAY(0x56214dc3f6e8)', 'ARRAY(0x56214bb364b0)') called at /usr/share/perl5/EBox/Sudo.pm line 210
EBox::Sudo::_root(1, '/sbin/iptables -t mangle -A FAILOVER-TEST --proto icmp --icmp-type echo-request -m string --algo bm  --string zfailovertest --dst ppp0/187.72.73.179 -j MARK --set-mark 2') called at /usr/share/perl5/EBox/Sudo.pm line 153
EBox::Sudo::root('/sbin/iptables -t mangle -A FAILOVER-TEST --proto icmp --icmp-type echo-request -m string --algo bm  --string zfailovertest --dst ppp0/187.72.73.179 -j MARK --set-mark 2') called at /usr/share/zentyal-network/failover-checker line 323
main::_setIptablesRule('gtw5', 1, 'gw_ping', 'ppp0/187.72.73.179') called at /usr/share/zentyal-network/failover-checker line 246
main::_testRule('EBox::Model::Row=HASH(0x56214dc9e008)') called at /usr/share/zentyal-network/failover-checker line 54
2020/08/30 11:54:10 INFO> Index.pm:187 EBox::Dashboard::CGI::Index::masonParameters - dashboard1
2020/08/30 11:55:03 ERROR> Sudo.pm:240 EBox::Sudo::_rootError - root command /sbin/iptables -t mangle -A FAILOVER-TEST --proto icmp --icmp-type echo-request -m string --algo bm  --string zfailovertest --dst ppp0/187.72.73.179 -j MARK --set-mark 2 failed.
Error output: iptables: No chain/target/match by that name.

Command output: .
Exit value: 1

19
Portuguese / Re: Conexão PPPoe
« on: September 05, 2020, 10:14:34 pm »
Ele dá o seguinte erro:

Some modules reported error when saving changes . More information on the logs in /var/log/zentyal/
The following modules failed while saving their changes, their state is unknown: network


Alguém pode me ajudar?

20
Portuguese / Conexão PPPoe
« on: August 31, 2020, 03:43:47 am »
Olá Pessoal alguém conseguiria me ajudar, tenho um servidor com 2 placas de rede definidas como wan, tive que mudar uma para co estão PPPoe, o zentyal até conecta e cria o gwtay, mas não navega, alguém pode me auxiliar?

21
Portuguese / Re: Certificado expirando antes do Prazo
« on: May 27, 2020, 01:09:11 pm »
Olá entendi a respeito da CLR, porém tentei realizar os procedimentos via linha de comando e não obtive sucesso, realizei com um editor de texto, alterando a default_crl_days= 30 para default_crl_days= 365, apenas fazendo isso já resolve?

22
Portuguese / Re: Certificado expirando antes do Prazo
« on: April 28, 2020, 07:03:19 pm »
Mas então aquela quantidade de dias que é colocada quando emito o certificado não é valida? Pois lá mostra validade até 2030

23
Portuguese / Re: DNS para Cientes VPN
« on: April 23, 2020, 04:53:39 am »
Você chegou a seguir os passos citados neste outro tópico?
https://forum.zentyal.org/index.php/topic,34930.0.html

24
Portuguese / Certificado expirando antes do Prazo
« on: April 20, 2020, 02:12:15 pm »
Bom dia pessoal, tive um problema com minha VPN, onde os usuários não conseguiam conectar e analisando os logs, aparecia o seguinte erro "Verificação do certificado falhou", após quebrar um pouco a cabeça, realizei a renovação dos certificados e baixei o arquivo de instalação com os novos certificados e funcionou, o estranho é que os certificados antigos, não estavam expirados pois os mesmo possuiam validade até 2030, alguém de vocês ja teve esse tipo de erro?

25
Portuguese / Re: DNS para Cientes VPN
« on: April 13, 2020, 01:23:13 pm »
Olá depois de colocar o DNS primário e Secundário você realizou o download de configuração do novo arquivo?

26
Portuguese / Re: VPN ERRO
« on: April 07, 2020, 06:59:46 pm »
Ok, então funcionou?

27
Portuguese / Re: VPN ERRO
« on: April 04, 2020, 07:59:30 pm »
Amigo a faixa de rede 192.168.160.0 é uma faixa virtual para sua VPN não deve alterala para a mesma faixa de sua rede interna deve manter a mesma sugerida ou por outra que não seja a mesma que a sua interna. Como configuração da minha VPN que tenho em uso hoje, deixo as seguintes configurações ativas:
Interface TUN
 Tradução de Endereços de Rede
 Permite conexões de cliente pra cliente
Redirecionar gateway


E coloco como primeiro servidor de nomes o  DNS da minha rede interna, funciona perfeitamente, depois disso realizo alguns bloqueios para segurança no firewall.

28
Portuguese / Re: VPN ERRO
« on: April 03, 2020, 01:41:29 am »
Sim, após qualquer alteração feita no servidor VPN, você deve baixar um arquivo novo de configuração

29
Portuguese / Re: VPN ERRO
« on: March 30, 2020, 09:16:04 pm »
Isso Amigo é essa a configuração sim e o processo para conectar outros usuários seria esse mesmo criando outros certificados. Utilizo o Zentyal desde a versão 2.0 e gosto muito, por ser prático e bem funcional, pena que ao longo dos anos eles foram retirando algumas ferramentas e outras funcionam com alguns problemas sem solução. Mas tenho instalado em meus clientes e tem funcionado por enquanto.

30
Portuguese / Re: VPN ERRO
« on: March 29, 2020, 01:04:09 am »
Olá Amigo nas configurações do servidor VPN possui uma configuração que você deve habilitar para permitir que clientes vpn vejam uns aos outros, em relação a conexão de 2 usuários ou mais com um mesmo certificado acredito que não é possível ele acaba desconectando o outro usuário, oque pode fazer é emitir um novo certificado e quando for baixar as configurações seleciona certificados diferentes.

Pages: 1 [2] 3 4 ... 9