This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
61
Installation and Upgrades / Re: [SOLVED] Ubuntu Server 16.04 install Zentyal 5.0 Error.
« on: March 20, 2018, 11:09:05 am »
Hi,
as far as I know, Zentyal shoud be installed on 64bit version of Ubuntu, not the 32bit version...
Regards
Thomas
as far as I know, Zentyal shoud be installed on 64bit version of Ubuntu, not the 32bit version...
Regards
Thomas
62
Installation and Upgrades / Re: PING, PING, PING and PING some more!
« on: March 05, 2018, 04:00:47 pm »
Hi,
normally, there are some settings in the Firewall module that seperate the nets...
Did you try to disable the Firewall and test? [ In my Net, I use a UTM, so I disabled the Zentyal Firewall completely... ]
Regards
Thomas
normally, there are some settings in the Firewall module that seperate the nets...
Did you try to disable the Firewall and test? [ In my Net, I use a UTM, so I disabled the Zentyal Firewall completely... ]
Regards
Thomas
63
Email and Groupware / Re: How the webmail works
« on: March 05, 2018, 03:51:04 pm »
Hi,
normally "SOGo" is not working on Port 20k (via WebBrowser)...
did you try via http(s)://[IP]/SOGo/ ?
Regards
Thomas
normally "SOGo" is not working on Port 20k (via WebBrowser)...
did you try via http(s)://[IP]/SOGo/ ?
Regards
Thomas
64
Installation and Upgrades / Re: Replacing Windows Server DC/AD with a Zentyal Server
« on: January 26, 2018, 02:13:12 pm »
Sidenote:
In Zentyal you use the RSAT Tools to deploy GPO like on M$ Servers ;-)
In Zentyal you use the RSAT Tools to deploy GPO like on M$ Servers ;-)
65
Directory and Authentication / Re: Error while restarting samba
« on: January 26, 2018, 02:11:57 pm »
Hi,
is your Zentyal box also the SchemaMaster, or is it another box?
If it is the same => sounds like a config issue while deploying your Samba Domain.
If different devices: maybe a Firewall issue? Or an issue with the certificates used by samba?
Regards
Thomas
is your Zentyal box also the SchemaMaster, or is it another box?
If it is the same => sounds like a config issue while deploying your Samba Domain.
If different devices: maybe a Firewall issue? Or an issue with the certificates used by samba?
Regards
Thomas
66
Installation and Upgrades / Re: Zentyal 5: How to backup and restore mails?
« on: January 26, 2018, 02:07:34 pm »
Easy way:
rsync the directory /var/vmail/[domainname] (if I remember right; atm I do not have SSH access to my Zentyal boxes) to a NAS or similar storage.
For Calendar and Contacts use the sogo-tool (it has a backup option...) and rsync the data to a different storage...
Regards
Thomas
rsync the directory /var/vmail/[domainname] (if I remember right; atm I do not have SSH access to my Zentyal boxes) to a NAS or similar storage.
For Calendar and Contacts use the sogo-tool (it has a backup option...) and rsync the data to a different storage...
Regards
Thomas
67
Other modules / Re: Error restarting service DNS. See /var/log/zentyal/zentyal.log
« on: January 08, 2018, 05:00:53 pm »
Hi,
if I am not completely wrong, there is an apparmor conf file that needs to be changed...
Sorry, I do not have details atm...
I do not have "direct" access to my Zentyal boxes until weekend, so if it is urgent, try googleling AppArmor and kerberos (/ SaMBa)
Regards
Thomas
if I am not completely wrong, there is an apparmor conf file that needs to be changed...
Sorry, I do not have details atm...
I do not have "direct" access to my Zentyal boxes until weekend, so if it is urgent, try googleling AppArmor and kerberos (/ SaMBa)
Regards
Thomas
68
Other modules / Re: Not taking values from /etc/fstab, customized mount option not working
« on: December 21, 2017, 02:09:59 pm »
Hi,
if nothing else helps, how about putting a "mount script" in boot.local?
I think Zentyal has a stub for the fstab, but atm I cannot check it...
Regards
Thomas
if nothing else helps, how about putting a "mount script" in boot.local?
I think Zentyal has a stub for the fstab, but atm I cannot check it...
Regards
Thomas
69
Installation and Upgrades / Re: rescuing files from broken zentyal 4.1 installation
« on: December 19, 2017, 12:56:39 pm »
ssh / scp (in combination with rsync maybe???) ;-)
70
Installation and Upgrades / Re: rescuing files from broken zentyal 4.1 installation
« on: December 18, 2017, 02:03:26 pm »
I would give it a try...
regarding to the posted messages it could be that the FS "has died"... :-(
regarding to the posted messages it could be that the FS "has died"... :-(
71
Installation and Upgrades / Re: rescuing files from broken zentyal 4.1 installation
« on: December 15, 2017, 10:11:13 am »
Hi,
you were more than half way there ;-)
please try:
mount /dev/mapper/core--vg-root /mnt
(or was it just a typo?)
Do you remember with which filesystem your LVM is formated? (I guess ext3 or ext4) you can give the mount program the fs-type by e.g. adding -t (fs): mount -t ext3 (...)
Was your Ubuntu Live disc an older Version? If you used ext4 for the partition, and your life-sys does not support ext4 that would resut in the error you posted.
Sometimes it is a bit easier to use gparted (also possible via live disc).
There you have a GUI similar to PartitionM***c some other useful tools and a (grafical) file-manager.
When you do a the next test, could you post the lines in /var/log/syslog that are linked to the mount?
Regards
Thomas
you were more than half way there ;-)
please try:
mount /dev/mapper/core--vg-root /mnt
(or was it just a typo?)
Do you remember with which filesystem your LVM is formated? (I guess ext3 or ext4) you can give the mount program the fs-type by e.g. adding -t (fs): mount -t ext3 (...)
Was your Ubuntu Live disc an older Version? If you used ext4 for the partition, and your life-sys does not support ext4 that would resut in the error you posted.
Sometimes it is a bit easier to use gparted (also possible via live disc).
There you have a GUI similar to PartitionM***c some other useful tools and a (grafical) file-manager.
When you do a the next test, could you post the lines in /var/log/syslog that are linked to the mount?
Regards
Thomas
72
Installation and Upgrades / Re: how to make hosts entry in Zentyal DNS server
« on: December 14, 2017, 04:14:37 pm »
did you check the DNS Config (in the Zentyal GUI)? there you can add hosts / IPs...
73
Directory and Authentication / Re: kinit: krb5_get_init_creds: unable to reach any kdc in realm
« on: December 14, 2017, 10:51:20 am »
pbis-open seems to be not configured / installed correctly...
Did you try it without this / did you already try to reinstall (better: purge and do a fresh install of this)?
Did you check forums / messageboards regarding such an error in pbis?
Did you try it without this / did you already try to reinstall (better: purge and do a fresh install of this)?
Did you check forums / messageboards regarding such an error in pbis?
74
Directory and Authentication / Re: kinit: krb5_get_init_creds: unable to reach any kdc in realm
« on: December 13, 2017, 04:40:27 pm »
Do you have any logs regarding the pbis-open?
maybe remove the package and try again?
Regards
Thomas
maybe remove the package and try again?
Regards
Thomas
75
Directory and Authentication / Re: Backup Server GPO issue
« on: December 13, 2017, 04:38:04 pm »
Hi, did you move the FSMO Roles to your BDC?
I think missing this caused your issue...
Regards
Thomas
I think missing this caused your issue...
Regards
Thomas