Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - amello

Pages: [1]
1
Installation and Upgrades / Re: IP Forwarding
« on: August 20, 2015, 11:53:35 pm »
Thank you for your reply.

I have 5 SIP on my router, with servers running plus home network, but will try to power cycle, after I ghost the image back to the box. Right now trying to setup manually on my linux, but really want to give zentyal a chance :)

May have couple 2950 and couple eServers laying around, so may get one of them up and install as I won't need more them 2 NICs (The one I built for the firewall has 5).

Will be back (like the Terminator would say)

Regards,
Al

2
Installation and Upgrades / IP Forwarding
« on: August 20, 2015, 03:14:51 pm »
Folks,

I've installed Zentyal on my home lab and am trying to make it work.

Zentyal: 4.1
5 Public Static IPs (for sake of discussion 104.25.25.20/29)
LAN 10.10.10.0/24
etho -> external -> IP 104.25.25.22, GW 104.25.25.26
eth1 -> internal -> IP 10.10.10.250
DHCP -> 10.10.10.50 - 10.10.10.150
FreeNAS jail -> 10.10.10.202 (* Port 80 forwarding needed *)
FreeNAS server -> 10.10.10.200

Firewall -> Packet Filter -> Accept -> ANY -> HTTP

Firewall -> Forwarding -> Interface: eth0 (external), Original destination -> Zentyal, Port: single - 80; Source -> Any; Destination: 10.10.10.202; Port: Same; Replace source address -> checked.

Access from the local network to the 10.10.10.202 IP is working fine, forwarding with my router works fine, but when remove the router and have Zentyal acting and the firewall and router, the configuration above won't work.

What am I doing wrong??

Thanks,
Al

3
Portuguese / Redirecionamento
« on: August 20, 2015, 06:19:11 am »
Boa noite,

Estou testando pela primeira vez Zentyal para substituir o meu routeador na minha casa.

A instalacao foi simples e a configuracao de DNS e DHCP funciona bem - ainda tenho que brincar com todas as opcoes para fixar IPs para os servidores. No momento configurei na mao nas maquinas.

Zentyal: 4.1
5 Static IPs publicos (usando para discucao 104.25.25.25)
LAN 10.10.10.0
etho -> externa -> IP 104.25.25.25
eth1 -> interna -> IP 10.10.10.250
DHCP -> 10.10.10.50 - 10.10.10.150
FreeNAS jail -> 10.10.10.202 (* preciso redirecionar porta 80 oara este IP *)
FreeNAS server -> 10.10.10.200

Firewall -> Packet Filter -> Accept -> ANY -> HTTP

Firewall -> Forwarding -> Interface: eth0 (minha externa), Original destination -> Zentyal, Port: single - 80; Source -> Any; Destination: 10.10.10.202; Port: Same; Replace source address -> checked.

Usando o navegador para abrir a pagina sempre da erro de pagina nao encontrada. Isso com o meu IP publico ou com e nome do meu servidor.dominio registrado. Usando o IP local abre que e' uma beleza.

O que estou fazendo errado? Alguma dica?

Atecipadamente grato,
Aloisio

Pages: [1]