Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
1
Installation and Upgrades / Samba audit
« on: June 16, 2015, 10:57:27 pm »
Hello folks,
I'm using Zentyal 3.3.10 and would like to know how to activate the samba logs, it shows nothing to me.
What can I do? Its already checked in the logs.
Thanks
I'm using Zentyal 3.3.10 and would like to know how to activate the samba logs, it shows nothing to me.
What can I do? Its already checked in the logs.
Thanks
2
Portuguese / Re: Zentyal + squid não estão fazendo cache de páginas nem donwloads!!!
« on: May 01, 2015, 02:06:47 am »
Alguma nova sobre o assunto, tbm nao tenho nenhum HIT!! Somente os de armazenamento local dos browsers .
3
Installation and Upgrades / Re: Iptables on Zentyal, never get it ;x
« on: April 06, 2015, 02:44:16 pm »
So, any of you seem not to understand that firewall rules also 
4
Installation and Upgrades / Iptables on Zentyal, never get it ;x
« on: April 01, 2015, 01:06:11 pm »
Hello guys,
I'm trying to make some iptables rules on the interface of Zentyal, can you explain how do I do any of this lines on the grphical interface?
iptables -t nat -A PREROUTING -d upgrade.bitdefender.com -j RETURN
iptables -A FORWARD -d upgrade.bitdefender.com -j ACCEPT
iptables -A FORWARD -s 192.168.0.0/16 -p tcp --dport 443 -j ACCEPT
iptables -A FORWARD -s 192.168.0.0/16 -p tcp --dport 7074 -j ACCEPT
It's beeing a real pain to do this
I don't know how to manage this lines in Zentyal
Can you help me?
Thanks a lot!
I'm trying to make some iptables rules on the interface of Zentyal, can you explain how do I do any of this lines on the grphical interface?
iptables -t nat -A PREROUTING -d upgrade.bitdefender.com -j RETURN
iptables -A FORWARD -d upgrade.bitdefender.com -j ACCEPT
iptables -A FORWARD -s 192.168.0.0/16 -p tcp --dport 443 -j ACCEPT
iptables -A FORWARD -s 192.168.0.0/16 -p tcp --dport 7074 -j ACCEPT
It's beeing a real pain to do this
I don't know how to manage this lines in ZentyalCan you help me?
Thanks a lot!
5
Installation and Upgrades / Re: Open ports
« on: March 30, 2015, 08:25:10 pm »
How do I properly open a port for everybody in my internal network on zentyal?
Thanks
Thanks
6
Installation and Upgrades / Open ports
« on: March 27, 2015, 09:20:32 pm »
Hello,
I use zentyal version 3.3.10 and I can't open a port for my antivirus comunicate, I already created a service with the port, add in the external rules of zentyal, and the port still dont communicate.
Already tried to create port forwarding rules, but I want it for all the addresses ...
What can it be?
Thanks a lot
I use zentyal version 3.3.10 and I can't open a port for my antivirus comunicate, I already created a service with the port, add in the external rules of zentyal, and the port still dont communicate.
Already tried to create port forwarding rules, but I want it for all the addresses ...
What can it be?
Thanks a lot
7
Installation and Upgrades / LAN can't connect to other VPNs
« on: February 12, 2015, 07:40:25 pm »
Hello guys,
I'm facing a trouble where my users that use zentyal as a gateway can't connect to other VPNs, it says that the VPN is unreachable, I'm using non-transparent proxy with LDAP connection.
As you can see in the picture, for the internal rules I have the 190 group, when the user is in this group, it didn't need to authenticate to connect and it's free, but if he/she isn't on that group it doesnt connect.
What can it be?
Thank's for your help, I appreciate.
I'm facing a trouble where my users that use zentyal as a gateway can't connect to other VPNs, it says that the VPN is unreachable, I'm using non-transparent proxy with LDAP connection.
As you can see in the picture, for the internal rules I have the 190 group, when the user is in this group, it didn't need to authenticate to connect and it's free, but if he/she isn't on that group it doesnt connect.
What can it be?
Thank's for your help, I appreciate.
8
Installation and Upgrades / Re: Unrestriceted access to objects
« on: September 15, 2014, 01:33:00 pm »
I found out that the MAC registered was causing some issues because of the "bonding" that a I made on the network cards.
I registered the randomly generated MAC of the virtual card and that was causing issues with communication, because of the physical real MAC of those, and the rules that only allow traffic of that IP in that specific MAC.
Thanks for the help.
I registered the randomly generated MAC of the virtual card and that was causing issues with communication, because of the physical real MAC of those, and the rules that only allow traffic of that IP in that specific MAC.
Thanks for the help.
9
Installation and Upgrades / Re: Unrestriceted access to objects
« on: September 11, 2014, 04:44:51 pm »
Thanks for the reply, I'm using non-transparent proxy, does this influence in somenthing?
10
Installation and Upgrades / Re: Firewall droping connection VPN
« on: September 11, 2014, 02:36:36 pm »
1. Ip adresses on the VPN are 192.2.1.x
2. the image below
3. The IP that i'm trying to comunicate through the VPN is 192.168.0.223 ( which is in the 0 - Servidores object)
4. The scenario of the internal network is the one in the picture
I needed that to have unrestricted access for servers in the network ai to the internet from the other servers
2. the image below
3. The IP that i'm trying to comunicate through the VPN is 192.168.0.223 ( which is in the 0 - Servidores object)
4. The scenario of the internal network is the one in the picture
I needed that to have unrestricted access for servers in the network ai to the internet from the other servers
11
Installation and Upgrades / [RESOLVED] Unrestriceted access to objects
« on: September 11, 2014, 02:01:08 pm »
Hello guys,
I'm having a trouble with an application server that passes through Zentyal, it need unrestricted access to the internet, independent of the port.
I already put the obects in the top of the list on internal networks firewall on zentyal.
But it keep blocking the results from an mashup to auto-fill fields in the program that is running on this server.
I would like to know how to grant unrestricted access to the internet, independent of the port to objects or specific IPs in the Zentyal.
Thank a lot.
I'm having a trouble with an application server that passes through Zentyal, it need unrestricted access to the internet, independent of the port.
I already put the obects in the top of the list on internal networks firewall on zentyal.
But it keep blocking the results from an mashup to auto-fill fields in the program that is running on this server.
I would like to know how to grant unrestricted access to the internet, independent of the port to objects or specific IPs in the Zentyal.
Thank a lot.
12
Installation and Upgrades / Re: Firewall droping connection VPN
« on: September 11, 2014, 01:54:38 pm »
Sorry, I was out a bit.
How can I do that?
How do I place this rule and where?
Thnaks
How can I do that?
How do I place this rule and where?
Thnaks
13
Installation and Upgrades / Re: Two locations, same lan
« on: September 02, 2014, 01:05:00 am »
nobody?
Why the firewall is dropping the connection between internal interfaces?
Why the firewall is dropping the connection between internal interfaces?
14
Installation and Upgrades / Re: Firewall droping connection VPN
« on: September 01, 2014, 10:58:25 pm »
how to avoid this?
[ 1473.519580] zentyal-firewall drop IN=tap0 OUT=eth1 MAC=xxxxxxx SRC=192.168.0.223 DST=192.169.0.200 LEN=40 TOS=0x00 PREC=0x00 TTL=1xx ID=23xxx PROTO=TCP SPT=2xx DPT=51xxx WINDOW=0 RES=0x00 RST URGP=0 MARK=0x1
[ 1473.519580] zentyal-firewall drop IN=tap0 OUT=eth1 MAC=xxxxxxx SRC=192.168.0.223 DST=192.169.0.200 LEN=40 TOS=0x00 PREC=0x00 TTL=1xx ID=23xxx PROTO=TCP SPT=2xx DPT=51xxx WINDOW=0 RES=0x00 RST URGP=0 MARK=0x1
15
Installation and Upgrades / Firewall droping connection VPN
« on: August 29, 2014, 09:46:50 pm »
Hello,
I'm trying to comunicate a device that uses port 51xxx to synchronize with a computer in the other side of the VPN, the source port varies but the destination is always 51xxx.
It is always dropping the connection, how do I solve this? already tried some iptables but didnt work.
Thank u all
I'm trying to comunicate a device that uses port 51xxx to synchronize with a computer in the other side of the VPN, the source port varies but the destination is always 51xxx.
It is always dropping the connection, how do I solve this? already tried some iptables but didnt work.
Thank u all