Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - turalyon

Pages: [1] 2 3
1
Installation and Upgrades / Re: Temporary failure in name resolution
« on: October 25, 2021, 10:45:32 am »
Hi,

When you lost the content of the '/etc/resolv.conf', the proper way to fix it is restarting the network module instead of editing yourself that configuration file. Zentyal should be able to generate again the content, however, sometimes I had to restart twice the module to recover the content.

Code: [Select]
sudo zs network restart

--

“This world is ours, and by the Holy Light we will keep it safe, now and forever".

2
Directory and Authentication / Re: OU "groups" not show in RSAT
« on: October 25, 2021, 10:40:44 am »
Hello,

"Groups" and "Users" are containers and not OUs, that why you can see them as the other OUs in RSAT.

--

“This world is ours, and by the Holy Light we will keep it safe, now and forever".

3
Hello,

Try the following repositories:

* https://gist.github.com/ivomts/4558134#gistcomment-3820552

--

“This world is ours, and by the Holy Light we will keep it safe, now and forever".

4
Installation and Upgrades / Re: Issue with zentyal
« on: October 20, 2021, 04:19:49 pm »
Hi,

I recommend you to generate a system report and analyze it very careful, specially, the Domain Controller part.

Code: [Select]
/usr/share/zentyal/smart-admin-report

Also, did you analyze the following log files:

* /var/log/syslog
* /var/log/zentyal/zentyal.log

Hope it helps you.

--

“This world is ours, and by the Holy Light we will keep it safe, now and forever".

5
Other modules / Re: Zentyal 6.2
« on: October 20, 2021, 04:16:44 pm »
Hi,

You could try to reconfigure your DLZ back-end as the below link explains:

* https://wiki.samba.org/index.php/BIND9_DLZ_DNS_Back_End#Reconfiguring_the_BIND9_DLZ_Back_End

If that doesn't fix the issue, paste me the result of the following commands:

Code: [Select]
ls -lad /var/lib/samba/
ls -la /var/lib/samba/

Also, did you analyze the following log files?

* /var/log/syslog
* /var/log/zentyal/zentyal.log

Hope it helps you.

--

“This world is ours, and by the Holy Light we will keep it safe, now and forever".

6
Hi,

There is an old open issue in Github about IPv6, however, at this moment, Zentyal does not support it.

* https://github.com/zentyal/zentyal/issues/2018

--

“This world is ours, and by the Holy Light we will keep it safe, now and forever".

7
Email and Groupware / Re: Changing ActiveSync port
« on: October 15, 2021, 02:00:34 pm »
Hi,

I didn't change it but I suppose that you just need to be aware of the stub 'SOGo.conf-apache.mas'.

---
“This world is ours, and by the Holy Light we will keep it safe, now and forever".

8
Hi,

Did you try to configure each module after the initial wizard instead of let the wizard configures the modules? I mean:

1. Download the script.
2. Install just the firewall module.
3. In the initial wizard, just configure the Network module.
4. Install the DNS and Domain Controller modules.
5. Configure the DNS module (including a record 'A' for the Windows Servers) and enable it.
6. Check out the connection between both servers.
7. Finally, configure the Domain Controller module and enable it.

Hope it helps.

--

“This world is ours, and by the Holy Light we will keep it safe, now and forever".

9
Hi,

There is an script located at '/usr/share/zentyal/smart-admin-report' that checks the status of a Zentyal, that script contains a function called 'dc_check' that do several checks in the Domain Controller module, perhaps you should run the script in both Zentyal and check the results.

Also, there is a command 'samba-tool showrepl' that you should run in both servers in order to check the replication status.

Finally, did you analyze the log files in both servers? Perhaps, the replication has some kind of issue.

---
“This world is ours, and by the Holy Light we will keep it safe, now and forever".

10
Installation and Upgrades / Re: can't log in Webadmin
« on: September 27, 2021, 10:22:09 am »
In my case, I have created a cronjob that restarts the webadmin module each 6 hours. This 'fix' the behaviour for me. Below my cronjob code:

Code: [Select]
## Workaround
## Added on: 15-09-2021
## Bug: https://github.com/zentyal/zentyal/issues/2055
0 */6 * * * /usr/bin/zs webadmin restart >/dev/null 2>&1

---
“This world is ours, and by the Holy Light we will keep it safe, now and forever".

11
Spanish / Re: Zentyal como DC y mikrotik como VPN pptp
« on: September 27, 2021, 10:18:02 am »
¿Es posible que estés experimentando el mismo error que el que reporta este usuario?

* https://forum.zentyal.org/index.php/topic,35274.msg114660.html#msg114660

12
Spanish / Re: Zentyal como DC y mikrotik como VPN pptp
« on: September 27, 2021, 10:16:10 am »
Hola,

¿Qué tipo de configuración estás usando? ¿Qué problemas te está dando Zentyal? ¿Has analizado los archivos de log?

---
“This world is ours, and by the Holy Light we will keep it safe, now and forever".

13
Spanish / Re: no obtengo respuestas del DNS desde la red wifi
« on: September 17, 2021, 01:31:22 pm »
Holap,

* ¿Tienes una regla en el cortafuegos que permita a la red de los clientes el acceso al servicio DNS?
* ¿Has probado en añadir una regla en el cortafuegos de tipo 'Registrar' para ver las peticiones que recibe Zentyal?
* ¿Has revisado los parámetros de configuración 'allow-' del archivo '/etc/bind/named.conf.options'?

---
“This world is ours, and by the Holy Light we will keep it safe, now and forever".


14
Other modules / Re: access to samba shares for sftp users
« on: September 17, 2021, 01:21:42 pm »
Hi,

Below you have the steps that I followed to access to the shares with a domain user through FTP:

1. Install the FTP module, disable the option 'Restrict to personal directories' and enable the module.

2. Through FileZilla, create a FTP connection using a 'Passive' transfer mode.

3. Connect to the FTP server, and then, just search for the path '/home/samba/shares'.

I also tested with SFTP, I enabled PAM and then, I could be able to connect to the shares through Filezilla. I think, this method requires steps 1 and 3 from above.

---
“This world is ours, and by the Holy Light we will keep it safe, now and forever".

15
Installation and Upgrades / Re: Stuck Upgrading from 5.1.3 to 6.0
« on: September 17, 2021, 01:03:57 pm »
Any solutions? After restart my server get  EBox::DNS::appArmorProfiles - Setting DNS apparmor profile  and i cant run it

You can try to locate the DNS process, kill it and then, reconfigure the broken or pending packages. And then, restart again the module.

Code: [Select]
## To detect a process
ps -ef | egrep -i 'dns|zentyal'
lslocks | grep -Ei 'dns|zentyal'

## To kill the process
kill -9 pid_of_the_process

## To reconfigure the broken or pending packages
## It is possible that you need to run this
## command more than once
dpkg --configure -a

## Restarting the module
zs dns restart

---
“This world is ours, and by the Holy Light we will keep it safe, now and forever".

Pages: [1] 2 3