Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
1
Installation and Upgrades / Re: [HOWTO] interface bonding using bond0 (also connected to bridge br0)
« on: May 14, 2014, 04:19:23 pm »
Hi,
Anyone can you help me? Just the first interface is configured with bridge? I really lost access to this interface? I trying to do this without success, the interface appears, but just second interface reply my icmp, see:
ifconfig
bond0 Link encap:Ethernet HWaddr 00:0c:29:4e:6f:b8
inet addr:172.16.71.1 Bcast:172.16.71.255 Mask:255.255.255.0
UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
RX packets:19 errors:0 dropped:72 overruns:0 frame:0
TX packets:270 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1709 (1.7 KB) TX bytes:16200 (16.2 KB)
eth0 Link encap:Ethernet HWaddr 00:0c:29:4e:6f:b8
inet addr:10.10.20.64 Bcast:10.10.20.255 Mask:255.255.255.0
UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
RX packets:19 errors:0 dropped:72 overruns:0 frame:0
TX packets:270 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1709 (1.7 KB) TX bytes:16200 (16.2 KB)
eth1 Link encap:Ethernet HWaddr 00:0c:29:4e:6f:c2
inet addr:10.10.10.25 Bcast:10.10.10.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:8370 errors:0 dropped:33 overruns:0 frame:0
TX packets:2342 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:839676 (839.6 KB) TX bytes:853778 (853.7 KB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:1889 errors:0 dropped:0 overruns:0 frame:0
TX packets:1889 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:477296 (477.2 KB) TX bytes:477296 (477.2 KB)
Anyone can you help me? Just the first interface is configured with bridge? I really lost access to this interface? I trying to do this without success, the interface appears, but just second interface reply my icmp, see:
ifconfig
bond0 Link encap:Ethernet HWaddr 00:0c:29:4e:6f:b8
inet addr:172.16.71.1 Bcast:172.16.71.255 Mask:255.255.255.0
UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
RX packets:19 errors:0 dropped:72 overruns:0 frame:0
TX packets:270 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1709 (1.7 KB) TX bytes:16200 (16.2 KB)
eth0 Link encap:Ethernet HWaddr 00:0c:29:4e:6f:b8
inet addr:10.10.20.64 Bcast:10.10.20.255 Mask:255.255.255.0
UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
RX packets:19 errors:0 dropped:72 overruns:0 frame:0
TX packets:270 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1709 (1.7 KB) TX bytes:16200 (16.2 KB)
eth1 Link encap:Ethernet HWaddr 00:0c:29:4e:6f:c2
inet addr:10.10.10.25 Bcast:10.10.10.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:8370 errors:0 dropped:33 overruns:0 frame:0
TX packets:2342 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:839676 (839.6 KB) TX bytes:853778 (853.7 KB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:1889 errors:0 dropped:0 overruns:0 frame:0
TX packets:1889 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:477296 (477.2 KB) TX bytes:477296 (477.2 KB)
2
Portuguese / Re: Bloqueio de mensageiros
« on: December 13, 2012, 01:51:09 pm »
Olá,
Para resolver o problema de abrir paginas https faça o seguinte procedimento:
Edite o arquivo /usr/share/zentyal/stubs/squid/exceptionsitelist.mas
Modifique a linha de :
**s
Para:
#**s
Não vai te mostrar o bloqueio e sim uma página em branco, porém irá funcionar o bloqueio.
Para resolver o problema de abrir paginas https faça o seguinte procedimento:
Edite o arquivo /usr/share/zentyal/stubs/squid/exceptionsitelist.mas
Modifique a linha de :
**s
Para:
#**s
Não vai te mostrar o bloqueio e sim uma página em branco, porém irá funcionar o bloqueio.
3
Portuguese / Re: Como liberar a Conectividade Social no proxy?
« on: December 13, 2012, 01:47:39 pm »
Olá,
Se eu não estou enganado a conectividade social não funciona através do proxy, libere os ips de destino da conectividade em seu firewall e coloque como exceção do seu proxy.
Se eu não estou enganado a conectividade social não funciona através do proxy, libere os ips de destino da conectividade em seu firewall e coloque como exceção do seu proxy.
4
Installation and Upgrades / ad-sync (Can't open /etc/zentyal/ad-sync_ignore.groups)
« on: April 05, 2012, 08:50:21 pm »
Dear,
When attempting to perform ad-sync it fails to import some groups, but when I put the groups in the file ad-sync_ignore.groups no use and returns the following error log:
04/05/2012 15:45:05 ERROR> ad-sync: 181 main :: __ANON__ - [ad-sync] Can not open / etc / zentyal / ad-sync_ignore.groups:
When attempting to perform ad-sync it fails to import some groups, but when I put the groups in the file ad-sync_ignore.groups no use and returns the following error log:
04/05/2012 15:45:05 ERROR> ad-sync: 181 main :: __ANON__ - [ad-sync] Can not open / etc / zentyal / ad-sync_ignore.groups:
5
Installation and Upgrades / Re: problem setting up new WAN NIC - modelInstance /dhcp/RangeTable/eth*
« on: January 13, 2012, 11:40:48 am »
Hi,
To Solve this just go to:
/usr/share/zentyal/stubs/dhcp/dhcpd.conf.mas
or
/usr/share/ebox/stubs/dhcp/dhcpd.conf.mas
Change :
default-lease-time 1800;
To:
default-lease-time 18000;
Work for me!!!
To Solve this just go to:
/usr/share/zentyal/stubs/dhcp/dhcpd.conf.mas
or
/usr/share/ebox/stubs/dhcp/dhcpd.conf.mas
Change :
default-lease-time 1800;
To:
default-lease-time 18000;
Work for me!!!
6
Portuguese / Re: Configurar porta
« on: July 30, 2011, 03:42:43 am »
Uma solução de contorno seria editar o squid.conf.mas e liberar a porta por ele... Porém seu proxy é transparente? Já tentou liberar o endereço completo?
7
Portuguese / Re: Bloqueio de lista de domínios no Proxy [RESOLVIDO]
« on: July 30, 2011, 03:39:48 am »
Como está o nome do arquivo da lista? Talvez seja interessante baixar novamente.
8
Portuguese / Re: Bloqueio por palavras
« on: July 30, 2011, 03:37:26 am »
Tiago,
O ideal seria utilizar através do controle de conteúdo mesmo (utilizando as listas e bloqueando "porn"), pois fora isso você somente irá bloquear a palavra sexo na url.
O ideal seria utilizar através do controle de conteúdo mesmo (utilizando as listas e bloqueando "porn"), pois fora isso você somente irá bloquear a palavra sexo na url.
Pages: [1]