This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
1
Installation and Upgrades / Re: Zentyal 3.5: DNS entries created on other DC not visible in GUI
« on: October 10, 2014, 09:46:37 am »
Still not Fixed in 4.0!
2
Installation and Upgrades / Re: Cannot enable openchange account for users outside the default user container
« on: October 10, 2014, 09:45:11 am »
Still not fixed in 4.0!
3
Installation and Upgrades / Zentyal 3.5: DNS entries created on other DC not visible in GUI
« on: July 06, 2014, 01:26:26 am »
Hi I got two DC's, one plain samba4 ( 4.1.8 ) DC
and I just added a Zentyal 3.5 additional DC.
However, I cannot see DNS entries in the Zentyal web GUI, created on the first DC.
Replication is working fine, and if I do name lookups , the Zentyal's nameserver responds perfectly.
The other way round DOES work.
and I just added a Zentyal 3.5 additional DC.
However, I cannot see DNS entries in the Zentyal web GUI, created on the first DC.
Replication is working fine, and if I do name lookups , the Zentyal's nameserver responds perfectly.
The other way round DOES work.
4
Installation and Upgrades / Zentyal 3.5:Can't create users - Additional Domain Controller
« on: July 06, 2014, 12:34:19 am »
This is the error I am getting:
Error on person LDAP entry creation: The request referenced an attribute that does not exist .<br/> Operation parameters:{ 'objectClass' => [ 'top', 'person', 'organizationalPerson', 'user', 'posixAccount', 'systemQuotas' ], 'dn' => 'CN=Test User1,CN=Users,DC=glxtest,DC=be', 'sn' => 'User1', 'name' => 'Test User1', 'quota' => 500, 'gidNumber' => '2513', 'sAMAccountName' => 'testuser1', 'givenName' => 'Test', 'homeDirectory' => '/home/testuser1', 'displayName' => 'Test User1', 'cn' => 'Test User1', 'uidNumber' => 2502, 'userPrincipalName' => 'testuser1@GLXTEST.BE', 'description' => 'Test User1', 'userAccountControl' => 514 } at /usr/share/perl5/EBox/Samba/User.pm line 470
trace log:
Error on person LDAP entry creation: The request referenced an attribute that does not exist
.<br/> Operation parameters:{
'objectClass' => [
'top',
'person',
'organizationalPerson',
'user',
'posixAccount',
'systemQuotas'
],
'dn' => 'CN=Test User1,CN=Users,DC=glxtest,DC=be',
'sn' => 'User1',
'name' => 'Test User1',
'quota' => 500,
'gidNumber' => '2513',
'sAMAccountName' => 'testuser1',
'givenName' => 'Test',
'homeDirectory' => '/home/testuser1',
'displayName' => 'Test User1',
'cn' => 'Test User1',
'uidNumber' => 2502,
'userPrincipalName' => 'testuser1@GLXTEST.BE',
'description' => 'Test User1',
'userAccountControl' => 514
}
at /usr/share/perl5/EBox/Samba/User.pm line 470
Why is Zentyal still trying to create an LDAP user?
Error on person LDAP entry creation: The request referenced an attribute that does not exist .<br/> Operation parameters:{ 'objectClass' => [ 'top', 'person', 'organizationalPerson', 'user', 'posixAccount', 'systemQuotas' ], 'dn' => 'CN=Test User1,CN=Users,DC=glxtest,DC=be', 'sn' => 'User1', 'name' => 'Test User1', 'quota' => 500, 'gidNumber' => '2513', 'sAMAccountName' => 'testuser1', 'givenName' => 'Test', 'homeDirectory' => '/home/testuser1', 'displayName' => 'Test User1', 'cn' => 'Test User1', 'uidNumber' => 2502, 'userPrincipalName' => 'testuser1@GLXTEST.BE', 'description' => 'Test User1', 'userAccountControl' => 514 } at /usr/share/perl5/EBox/Samba/User.pm line 470
trace log:
Error on person LDAP entry creation: The request referenced an attribute that does not exist
.<br/> Operation parameters:{
'objectClass' => [
'top',
'person',
'organizationalPerson',
'user',
'posixAccount',
'systemQuotas'
],
'dn' => 'CN=Test User1,CN=Users,DC=glxtest,DC=be',
'sn' => 'User1',
'name' => 'Test User1',
'quota' => 500,
'gidNumber' => '2513',
'sAMAccountName' => 'testuser1',
'givenName' => 'Test',
'homeDirectory' => '/home/testuser1',
'displayName' => 'Test User1',
'cn' => 'Test User1',
'uidNumber' => 2502,
'userPrincipalName' => 'testuser1@GLXTEST.BE',
'description' => 'Test User1',
'userAccountControl' => 514
}
at /usr/share/perl5/EBox/Samba/User.pm line 470
Why is Zentyal still trying to create an LDAP user?
5
Installation and Upgrades / Cannot enable openchange account for users outside the default user container
« on: June 21, 2014, 01:51:59 am »
When I try to enable openchange account for users in other containers but the default container I get following message:
This does not make much sense to me :-)
Quote
This addon applies only to users in the default 'Users' container
This does not make much sense to me :-)
6
Installation and Upgrades / Re: [SOLVED] 3.5 -> Cannot configure as Additional Domain Controller
« on: June 21, 2014, 01:45:19 am »
The latest version seems to have worked for me , I could add the latest zentyal 3.5 daily build install to an existing samba 4 domain
7
Installation and Upgrades / Re: 3.5 -> Cannot configure as Additional Domain Controller
« on: June 04, 2014, 05:43:31 pm »
This is what I found in /var/log/zentyal/zentyal.log
2014/06/04 17:37:16 ERROR> Run.pm:82 EBox::CGI::Run::run - Unable to load CGI: URL=Samba/Controller/DomainSettings CLASS=EBox::Samba::CGI::Controller::DomainSettings ERROR: Can't locate EBox/Samba/CGI/Controller/DomainSettings.pm in @INC (you may need to install the EBox::Samba::CGI::Controller::DomainSettings module) (@INC contains: /etc/perl /usr/local/lib/perl/5.18.2 /usr/local/share/perl/5.18.2 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.18 /usr/share/perl/5.18 /usr/local/lib/site_perl .) at (eval 730) line 2, <GEN0> line 141.
BEGIN failed--compilation aborted at (eval 730) line 2, <GEN0> line 141.
2014/06/04 17:37:16 WARN> zentyal.psgi:43 main::__ANON__ - Missing argument in sprintf at /usr/share/perl5/EBox/Model/DataForm.pm line 765, <GEN0> line 152.
2014/06/04 17:37:23 WARN> zentyal.psgi:43 main::__ANON__ - Missing argument in sprintf at /usr/share/perl5/EBox/Model/DataForm.pm line 765, <GEN0> line 159.
2014/06/04 17:37:31 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /usr/share/zentyal/psgi/zentyal.psgi (pid: 17601) - ldbsearch -H /var/lib/samba/private/sam.ldb -s base dn|grep ^dn:
2014/06/04 17:37:45 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /usr/share/zentyal/psgi/zentyal.psgi (pid: 17601) - /bin/cat /var/lib/zentyal/conf/zentyal-mysql.passwd
2014/06/04 17:39:43 WARN> zentyal.psgi:43 main::__ANON__ - Missing argument in sprintf at /usr/share/perl5/EBox/Model/DataForm.pm line 765, <GEN0> line 199.
2014/06/04 17:40:07 ERROR> Run.pm:82 EBox::CGI::Run::run - Unable to load CGI: URL=Samba/Controller/DomainSettings CLASS=EBox::Samba::CGI::Controller::DomainSettings ERROR: Can't locate EBox/Samba/CGI/Controller/DomainSettings.pm in @INC (you may need to install the EBox::Samba::CGI::Controller::DomainSettings module) (@INC contains: /etc/perl /usr/local/lib/perl/5.18.2 /usr/local/share/perl/5.18.2 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.18 /usr/share/perl/5.18 /usr/local/lib/site_perl .) at (eval 868) line 2, <GEN0> line 202.
BEGIN failed--compilation aborted at (eval 868) line 2, <GEN0> line 202.
2014/06/04 17:40:07 WARN> zentyal.psgi:43 main::__ANON__ - Missing argument in sprintf at /usr/share/perl5/EBox/Model/DataForm.pm line 765, <GEN0> line 213.
2014/06/04 17:37:16 ERROR> Run.pm:82 EBox::CGI::Run::run - Unable to load CGI: URL=Samba/Controller/DomainSettings CLASS=EBox::Samba::CGI::Controller::DomainSettings ERROR: Can't locate EBox/Samba/CGI/Controller/DomainSettings.pm in @INC (you may need to install the EBox::Samba::CGI::Controller::DomainSettings module) (@INC contains: /etc/perl /usr/local/lib/perl/5.18.2 /usr/local/share/perl/5.18.2 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.18 /usr/share/perl/5.18 /usr/local/lib/site_perl .) at (eval 730) line 2, <GEN0> line 141.
BEGIN failed--compilation aborted at (eval 730) line 2, <GEN0> line 141.
2014/06/04 17:37:16 WARN> zentyal.psgi:43 main::__ANON__ - Missing argument in sprintf at /usr/share/perl5/EBox/Model/DataForm.pm line 765, <GEN0> line 152.
2014/06/04 17:37:23 WARN> zentyal.psgi:43 main::__ANON__ - Missing argument in sprintf at /usr/share/perl5/EBox/Model/DataForm.pm line 765, <GEN0> line 159.
2014/06/04 17:37:31 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /usr/share/zentyal/psgi/zentyal.psgi (pid: 17601) - ldbsearch -H /var/lib/samba/private/sam.ldb -s base dn|grep ^dn:
2014/06/04 17:37:45 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /usr/share/zentyal/psgi/zentyal.psgi (pid: 17601) - /bin/cat /var/lib/zentyal/conf/zentyal-mysql.passwd
2014/06/04 17:39:43 WARN> zentyal.psgi:43 main::__ANON__ - Missing argument in sprintf at /usr/share/perl5/EBox/Model/DataForm.pm line 765, <GEN0> line 199.
2014/06/04 17:40:07 ERROR> Run.pm:82 EBox::CGI::Run::run - Unable to load CGI: URL=Samba/Controller/DomainSettings CLASS=EBox::Samba::CGI::Controller::DomainSettings ERROR: Can't locate EBox/Samba/CGI/Controller/DomainSettings.pm in @INC (you may need to install the EBox::Samba::CGI::Controller::DomainSettings module) (@INC contains: /etc/perl /usr/local/lib/perl/5.18.2 /usr/local/share/perl/5.18.2 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.18 /usr/share/perl/5.18 /usr/local/lib/site_perl .) at (eval 868) line 2, <GEN0> line 202.
BEGIN failed--compilation aborted at (eval 868) line 2, <GEN0> line 202.
2014/06/04 17:40:07 WARN> zentyal.psgi:43 main::__ANON__ - Missing argument in sprintf at /usr/share/perl5/EBox/Model/DataForm.pm line 765, <GEN0> line 213.
8
Installation and Upgrades / [SOLVED] 3.5 -> Cannot configure as Additional Domain Controller
« on: June 04, 2014, 05:32:33 pm »
Hi,
I am trying to join 3.5 to an existing Domain (Samba4) but, when I select 'Additional Domain Controller,
I can fill in all the information, but as soon as I hit "save" it just goes back to "Domain Controller" and no attempt to join the existing domain is made. (After applying changes), it is just a standalone AD
I am trying to join 3.5 to an existing Domain (Samba4) but, when I select 'Additional Domain Controller,
I can fill in all the information, but as soon as I hit "save" it just goes back to "Domain Controller" and no attempt to join the existing domain is made. (After applying changes), it is just a standalone AD
9
Installation and Upgrades / Re: 3.5 from daily iso, lvm error in KVM by setup
« on: June 04, 2014, 05:26:51 pm »
I can confirm this issue, On VMWare, I can only get 3.5 installed by going into expert mode and choose a non-LVM partitioning scheme.
10
Installation and Upgrades / Re: Additional DC, Some GUI Issues
« on: April 03, 2014, 04:04:29 pm »
I didnt realize, but apparently some of the AD users/group data is also in the local LDAP tree (running on port 390)
So I assume there's a sync between the Samba LDAP and OpenLDAP. but not all user data is synced. (mail,otherMailBox,....)
Is there a way to completely bypass the local LDAP and local bind?
Or is this planned for a later release?
Same question for DNS , I want to be able to manage both users/group and DNS.
But in order to do that I ofcourse need to see all the records that are in AD, also the ones that where in AD before I added the Zentyal DC.
So I assume there's a sync between the Samba LDAP and OpenLDAP. but not all user data is synced. (mail,otherMailBox,....)
Is there a way to completely bypass the local LDAP and local bind?
Or is this planned for a later release?
Same question for DNS , I want to be able to manage both users/group and DNS.
But in order to do that I ofcourse need to see all the records that are in AD, also the ones that where in AD before I added the Zentyal DC.
11
Installation and Upgrades / Additional DC, Some GUI Issues
« on: April 02, 2014, 10:03:13 pm »
Hi all,
I am running 2 Samba 4 4.0.15 DC's and now added a Zentyal 3.4 system as Additional DC.
I had some issues getting the Zentyal machine added as PDC, due to Deleted Entries in the AD tree. But that is resolved now.
I still seem to have some issues, mainly Admin GUI related.
Issue 1: AD User details.
Users are propagated properly both ways.
However: in the Zentyal Admin GUI -> Users and Computers, the email addresses do not show up for existing AD users.
If I add a user via Zentyal DC, The email address is visible.
Issue 2: Using AD Authentication for Zentyal Admin GUI
I Was expecting to be able to logon the Zentyal Admin GUI, using a Domain Admin account
Is this possible somehow?
Issue 3: AD DNS records not shown in Zentyal Admin GUI
Prior to enable the 'Additional Domain' setup , I added one of the existing DC's via the DNS Settings in Zentyal Admin GUI.
After successful replication, I still only see these 2 DNS records, but no other Zones or Records are showing up in the Zentya Admin GUI, while ,
if I check via RSAT or even do a query on the Zentyal DC, I can clearly see it properly replicated all DNS records and Zones.
Anyone knows how to get one or more of these issues resolved?
I am running 2 Samba 4 4.0.15 DC's and now added a Zentyal 3.4 system as Additional DC.
I had some issues getting the Zentyal machine added as PDC, due to Deleted Entries in the AD tree. But that is resolved now.
I still seem to have some issues, mainly Admin GUI related.
Issue 1: AD User details.
Users are propagated properly both ways.
However: in the Zentyal Admin GUI -> Users and Computers, the email addresses do not show up for existing AD users.
If I add a user via Zentyal DC, The email address is visible.
Issue 2: Using AD Authentication for Zentyal Admin GUI
I Was expecting to be able to logon the Zentyal Admin GUI, using a Domain Admin account
Is this possible somehow?
Issue 3: AD DNS records not shown in Zentyal Admin GUI
Prior to enable the 'Additional Domain' setup , I added one of the existing DC's via the DNS Settings in Zentyal Admin GUI.
After successful replication, I still only see these 2 DNS records, but no other Zones or Records are showing up in the Zentya Admin GUI, while ,
if I check via RSAT or even do a query on the Zentyal DC, I can clearly see it properly replicated all DNS records and Zones.
Anyone knows how to get one or more of these issues resolved?
Pages: [1]