This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
1
Installation and Upgrades / Re: URGENT: Newest Update hoses firewall..
« on: January 18, 2011, 04:02:34 pm »
I actually tracked my problem down to a physical switching loop situation happening on my network.
For some reason up until that particular update, the firewall ignored the problem.
After the update, it started doing the described issue.
Fixed the physical loop issue, firewall stopped dropping packets.
Still doesn't make sense regarding the firewalls behavior, but it works now.
For some reason up until that particular update, the firewall ignored the problem.
After the update, it started doing the described issue.
Fixed the physical loop issue, firewall stopped dropping packets.
Still doesn't make sense regarding the firewalls behavior, but it works now.
2
Installation and Upgrades / Re: Help! How to keep apache from globbing onto all ip addresses?
« on: January 09, 2011, 06:57:31 pm »
I know its the weekend and all, but *bump*
3
Installation and Upgrades / Re: Help! How to keep apache from globbing onto all ip addresses?
« on: January 07, 2011, 04:31:49 pm »
I did that. Still globbed on. I think because the virtual hosts are also set in a template file to glob onto *
Should I have to edit multiple template files to affect one setting?
Should I have to edit multiple template files to affect one setting?
4
Installation and Upgrades / Help! How to keep apache from globbing onto all ip addresses?
« on: January 07, 2011, 04:15:48 pm »
How can I change the zentyal templates to keep apache from grabbing onto all the ip addresses?
I have other services that I want to use aliased ips on port 80 but apache keeps grabbing the ips, and Zentyal doesn't have the option anywhere to set which ip apache is on..
I have other services that I want to use aliased ips on port 80 but apache keeps grabbing the ips, and Zentyal doesn't have the option anywhere to set which ip apache is on..
5
Installation and Upgrades / Re: :: PPPOE Interface
« on: December 20, 2010, 09:01:21 pm »
Or restart ebox networking
sudo service ebox network restart
sudo service ebox network restart
7
Installation and Upgrades / l7-filter segfault
« on: December 13, 2010, 03:29:08 pm »
Dec 13 16:30:21 pbx kernel: [68589.729686] l7-filter[18117]: segfault at 100000008 ip 00007ff0897e473a sp 00007ff089565aa0 error 4 in libc-2.11.1.so[7ff08976d000+17a000]
Weeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee...
Weeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee...
8
Installation and Upgrades / Re: URGENT: Newest Update hoses firewall..
« on: December 10, 2010, 01:58:57 pm »
No idea, but I'm continuing to have very very strange issues with my ebox.
Squid won't restart, but running the init.d script starts it fine.
Firewall stops responding etc..
Squid won't restart, but running the init.d script starts it fine.
Firewall stops responding etc..
9
Installation and Upgrades / Re: URGENT: Newest Update hoses firewall..
« on: December 08, 2010, 09:18:24 pm »
Well, after restoring the service configs from Sunday 2 or three times, it seemed to have finally worked.
There is something wonky happening with Zentyal, I've noticed it doing similar things before, but this the first time I have updated and lost the use of the machine for the entire day. I usually just have to reboot once or twice to get the thing moving again.
There is something wonky happening with Zentyal, I've noticed it doing similar things before, but this the first time I have updated and lost the use of the machine for the entire day. I usually just have to reboot once or twice to get the thing moving again.
10
Installation and Upgrades / Re: URGENT: Newest Update hoses firewall..
« on: December 08, 2010, 07:08:12 pm »
Also getting alot of this..
Firewall cuts access in and out and I think dns is screwy also.
If I retry, sometimes adding aliases work.
Code: [Select]
Cannot find row with rowId host8046. Component directory: domainTable/keys/doma6880/hostnames/keys/host8046/alias. Parent composite: at /usr/share/perl5/EBox/Model/DataTable.pm line 4686 EBox::Model::DataTable::parentRow('EBox::DNS::Model::AliasTable=HASH(0x7ff973bdce00)') called at /usr/share/perl5/EBox/DNS/Model/AliasTable.pm line 158 EBox::DNS::Model::AliasTable::pageTitle('EBox::DNS::Model::AliasTable=HASH(0x7ff973bdce00)') called at /usr/share/ebox/templates/ajax/modelViewer.mas line 137 HTML::Mason::Commands::__ANON__('model', 'EBox::DNS::Model::AliasTable=HASH(0x7ff973bdce00)', 'onlyBody', 1) called at /usr/share/perl5/HTML/Mason/Component.pm line 135 HTML::Mason::Component::run('HTML::Mason::Component::Subcomponent=HASH(0x7ff974b51fe0)', 'model', 'EBox::DNS::Model::AliasTable=HASH(0x7ff973bdce00)', 'onlyBody', 1) called at /usr/share/perl5/HTML/Mason/Request.pm line 1284 eval {...} called at /usr/share/perl5/HTML/Mason/Request.pm line 1274 HTML::Mason::Request::comp(undef, undef, 'model', 'EBox::DNS::Model::AliasTable=HASH(0x7ff973bdce00)', 'onlyBody', 1) called at /usr/share/ebox/templates/ajax/modelViewer.mas line 33 HTML::Mason::Commands::__ANON__('data', undef, 'dataTable', 'HASH(0x7ff972bd20e8)', 'model', 'EBox::DNS::Model::AliasTable=HASH(0x7ff973bdce00)', 'action', 'changeAdd', 'editid', ...) called at /usr/share/perl5/HTML/Mason/Component.pm line 135 HTML::Mason::Component::run('HTML::Mason::Component::FileBased=HASH(0x7ff974b52550)', 'data', undef, 'dataTable', 'HASH(0x7ff972bd20e8)', 'model', 'EBox::DNS::Model::AliasTable=HASH(0x7ff973bdce00)', 'action', 'changeAdd', ...) called at /usr/share/perl5/HTML/Mason/Request.pm line 1284 eval {...} called at /usr/share/perl5/HTML/Mason/Request.pm line 1274 HTML::Mason::Request::comp(undef, undef, undef, 'data', undef, 'dataTable', 'HASH(0x7ff972bd20e8)', 'model', 'EBox::DNS::Model::AliasTable=HASH(0x7ff973bdce00)', ...) called at /usr/share/perl5/HTML/Mason/Request.pm line 475 eval {...} called at /usr/share/perl5/HTML/Mason/Request.pm line 475 eval {...} called at /usr/share/perl5/HTML/Mason/Request.pm line 425 HTML::Mason::Request::exec('HTML::Mason::Request=HASH(0x7ff974a6dbe0)') called at /usr/share/perl5/HTML/Mason/Interp.pm line 342 HTML::Mason::Interp::exec(undef, undef, 'data', undef, 'dataTable', 'HASH(0x7ff972bd20e8)', 'model', 'EBox::DNS::Model::AliasTable=HASH(0x7ff973bdce00)', 'action', ...) called at /usr/share/perl5/EBox/CGI/Base.pm line 140 EBox::CGI::Base::_body('EBox::CGI::Controller::DataTable=HASH(0x7ff974854780)') called at /usr/share/perl5/EBox/CGI/ClientRawBase.pm line 89 EBox::CGI::ClientRawBase::_print('EBox::CGI::Controller::DataTable=HASH(0x7ff974854780)') called at /usr/share/perl5/EBox/CGI/Controller/DataTable.pm line 292 EBox::CGI::Controller::DataTable::_print('EBox::CGI::Controller::DataTable=HASH(0x7ff974854780)') called at /usr/share/perl5/EBox/CGI/ClientRawBase.pm line 202 EBox::CGI::ClientRawBase::run('EBox::CGI::Controller::DataTable=HASH(0x7ff974854780)') called at /usr/share/perl5/EBox/CGI/Run.pm line 120 EBox::CGI::Run::run('EBox::CGI::Run', 'Dns/Controller/AliasTable', 'EBox') called at /usr/share/ebox/cgi/ebox.cgi line 35 ModPerl::ROOT::ModPerl::Registry::usr_share_ebox_cgi_ebox_2ecgi::handler('Apache2::RequestRec=SCALAR(0x7ff9706caf38)') called at /usr/lib/perl5/ModPerl/RegistryCooker.pm line 204 eval {...} called at /usr/lib/perl5/ModPerl/RegistryCooker.pm line 204 ModPerl::RegistryCooker::run('ModPerl::Registry=HASH(0x7ff9706cb0a0)') called at /usr/lib/perl5/ModPerl/RegistryCooker.pm line 170 ModPerl::RegistryCooker::default_handler('ModPerl::Registry=HASH(0x7ff9706cb0a0)') called at /usr/lib/perl5/ModPerl/Registry.pm line 31 ModPerl::Registry::handler('ModPerl::Registry', 'Apache2::RequestRec=SCALAR(0x7ff9706caf38)') called at -e line 0 eval {...} called at -e line 0
Firewall cuts access in and out and I think dns is screwy also.
If I retry, sometimes adding aliases work.
11
Installation and Upgrades / Re: URGENT: Newest Update hoses firewall..
« on: December 08, 2010, 06:59:38 pm »
5 hours later, I still don't know what is happening. But if I change anything in the dashboard, the firewall starts blocking all internal traffic from going through the machine.
Even when all rules are set to ANY ANY ANY
Even when all rules are set to ANY ANY ANY
12
Installation and Upgrades / Re: URGENT: Newest Update hoses firewall..
« on: December 08, 2010, 05:56:03 pm »Code: [Select]
# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.
# PCI device 0x10de:0x07dc (forcedeth)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:24:8c:59:68:7f", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"
# PCI device 0x1186:0x1300 (8139too)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:13:46:28:3b:b0", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
# PCI device 0x8086:0x100f (e1000)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:34:4f:71", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth2"
ETH2 is not present in this machine, but the line stays there for a failover situation where I have to take an image of this machine and run it in VMware.
13
Installation and Upgrades / Re: URGENT: Newest Update hoses firewall..
« on: December 08, 2010, 03:30:41 pm »Code: [Select]
ii duplicity 0.6.10-0ubuntu1+ebox1 encrypted bandwidth-efficient backup
ii ebox 2.0.9 Zentyal - Core
ii ebox-antivirus 2.0.4 Zentyal - Antivirus
ii ebox-ca 2.0.1 Zentyal - Certification Authority
ii ebox-dhcp 2.0.2 Zentyal - DHCP Service
ii ebox-dns 2.0.1 Zentyal - DNS Service
ii ebox-ebackup 2.0.6 Zentyal - Backup
ii ebox-firewall 2.0 Zentyal - Firewall
ii ebox-ftp 2.0 Zentyal - FTP
ii ebox-l7-protocols 2.0 Zentyal - Layer-7 Filter
ii ebox-monitor 2.0 Zentyal - Monitor
ii ebox-network 2.0.6 Zentyal - Network Configuration
ii ebox-ntp 2.0 Zentyal - NTP Service
ii ebox-objects 2.0 Zentyal - Network Objects
ii ebox-samba 2.0.5 Zentyal - File Sharing
ii ebox-services 2.0 Zentyal - Network Services
ii ebox-software 2.0.5 Zentyal - Software Management
ii ebox-squid 2.0.2 Zentyal - HTTP Proxy (Cache and Content Filt
ii ebox-trafficshaping 2.0.3 Zentyal - Traffic Shaping
ii ebox-usersandgroups 2.0.7 Zentyal - Users and Groups
ii ebox-webserver 2.0 Zentyal - Web Server
ii john 1.7.6-1~ebox0~lucid0 active password cracking tool
ii john-data 1.7.6-1~ebox0~lucid0 active password cracking tool - character se
ii libebox 2.0.4 Zentyal - Common Library
ii p3scan 2:2.3.2-7ubuntu1+ebox1 transparent POP3-proxy with virus- and spam-
ii roundcube 0.3.1-3ubuntu1~ebox2~lucid1 skinnable AJAX based webmail solution for IM
ii roundcube-core 0.3.1-3ubuntu1~ebox2~lucid1 skinnable AJAX based webmail solution for IM
ii roundcube-pgsql 0.3.1-3ubuntu1~ebox2~lucid1 metapackage providing PostgreSQL dependencie
ii roundcube-sqlite 0.3.1-3ubuntu1~ebox2~lucid1 metapackage providing sqlite dependencies fo
ii samba-vscan 0.3.6cbeta5ebox4-2 Samba virus scanning VFS module
14
Installation and Upgrades / URGENT: Newest Update hoses firewall..
« on: December 08, 2010, 02:42:08 pm »
With the last update, my firewall started blocking the internal interface as the external!!
I had eth0 as internal, and eth1 as ppoe external.
I noticed ever time I made a change my dashboard would stop responding.
I finally had to switch the interfaces to get everything working again and I don't know if its fixed completely.
Anyone know whats going on?!!
I had eth0 as internal, and eth1 as ppoe external.
I noticed ever time I made a change my dashboard would stop responding.
I finally had to switch the interfaces to get everything working again and I don't know if its fixed completely.
Anyone know whats going on?!!
15
Installation and Upgrades / Strange problem after enabling swap file ~12 hours later, the system slows down.
« on: December 03, 2010, 10:36:28 am »
I'm having an issue with my Zentyal server.
Approximately 8-12 hours after enabling the swap file, my system continually reads + writes from the hard disk and becomes almost completely unresponsive. Kswapd0 is usually the culprit when looking at top.
If I leave my swap file disabled, the machine performs great for 2+ weeks without rebooting.
The moment I enable it, things start breaking.
Can someone help me figure out how to debug this?
Approximately 8-12 hours after enabling the swap file, my system continually reads + writes from the hard disk and becomes almost completely unresponsive. Kswapd0 is usually the culprit when looking at top.
If I leave my swap file disabled, the machine performs great for 2+ weeks without rebooting.
The moment I enable it, things start breaking.
Can someone help me figure out how to debug this?