This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
31
Installation and Upgrades / Fresh 4.1 install - neither mail/groupware nor openchange server install possibl
« on: October 10, 2015, 06:07:37 pm »
Hello,
I just installed a fresh Zentyal 4.1 server. I configured network correctly, I can reach internet.
I also can reach the server config at https://server:8443
But I cannot install some software.
In the software center, I am offered to install:
Mail and Groupware 4.1.3
OpenChange Server 4.1.3
but when I tick them on, I get errors:
Openchange server install says:
"Einige Pakete konnten nicht installiert werden. Das kann bedeuten, dass
Sie eine unmögliche Situation angefordert haben oder, wenn Sie die
Unstable-Distribution verwenden, dass einige erforderliche Pakete noch
nicht erstellt wurden oder Incoming noch nicht verlassen haben.
Die folgenden Informationen helfen Ihnen vielleicht, die Situation zu lösen:
Die folgenden Pakete haben unerfüllte Abhängigkeiten:
zentyal-openchange : Hängt ab von: openchangeserver (>= 3:2.4-zentyal3) soll aber nicht installiert werden"
Similarly, I get the error - when installing openchangeserver:
"Einige Pakete konnten nicht installiert werden. Das kann bedeuten, dass
Sie eine unmögliche Situation angefordert haben oder, wenn Sie die
Unstable-Distribution verwenden, dass einige erforderliche Pakete noch
nicht erstellt wurden oder Incoming noch nicht verlassen haben.
Die folgenden Informationen helfen Ihnen vielleicht, die Situation zu lösen:
Die folgenden Pakete haben unerfüllte Abhängigkeiten:
zentyal-mail : Hängt ab von: zentyal-openchange soll aber nicht installiert werden"
So the error is in both cases, zentyal-openchange should not be installed. Why not? How can I get past the error and install some mail, including mail fetching from external mails, for users?
I just installed a fresh Zentyal 4.1 server. I configured network correctly, I can reach internet.
I also can reach the server config at https://server:8443
But I cannot install some software.
In the software center, I am offered to install:
Mail and Groupware 4.1.3
OpenChange Server 4.1.3
but when I tick them on, I get errors:
Openchange server install says:
"Einige Pakete konnten nicht installiert werden. Das kann bedeuten, dass
Sie eine unmögliche Situation angefordert haben oder, wenn Sie die
Unstable-Distribution verwenden, dass einige erforderliche Pakete noch
nicht erstellt wurden oder Incoming noch nicht verlassen haben.
Die folgenden Informationen helfen Ihnen vielleicht, die Situation zu lösen:
Die folgenden Pakete haben unerfüllte Abhängigkeiten:
zentyal-openchange : Hängt ab von: openchangeserver (>= 3:2.4-zentyal3) soll aber nicht installiert werden"
Similarly, I get the error - when installing openchangeserver:
"Einige Pakete konnten nicht installiert werden. Das kann bedeuten, dass
Sie eine unmögliche Situation angefordert haben oder, wenn Sie die
Unstable-Distribution verwenden, dass einige erforderliche Pakete noch
nicht erstellt wurden oder Incoming noch nicht verlassen haben.
Die folgenden Informationen helfen Ihnen vielleicht, die Situation zu lösen:
Die folgenden Pakete haben unerfüllte Abhängigkeiten:
zentyal-mail : Hängt ab von: zentyal-openchange soll aber nicht installiert werden"
So the error is in both cases, zentyal-openchange should not be installed. Why not? How can I get past the error and install some mail, including mail fetching from external mails, for users?
32
German / upgrade 3.5 auf 4.0 failed - was nun?
« on: October 10, 2015, 12:19:45 pm »Auf Zentyal 3.5 habe ich in der Weboberfläche den "Upgrade to 4.0" button angeklickt.
Ergebnis:
Statusinformationen werden eingelesen....
Die folgenden Pakete wurden automatisch installiert und werden nicht mehr benötigt:
apache2.2-bin collectd collectd-core consolekit dbconfig-common heimdal-kdc
ldap-auth-client ldap-auth-config libapache2-mod-ldap-userdir libbind9-80
libclass-isa-perl libconfig++8 libconfig8 libdbi1 libdbus-glib-1-2 libdm0
libdns81 libgd2-noxpm libicu48 libisc83 libisccc80 libisccfg82 liblua5.1-0
liblwres80 libmath-round-perl libmcrypt4 libnss-ldap
libpackage-deprecationmanager-perl libpam-heimdal libpam-ldap libpango1.0-0
librrd4 librrds-perl libslp1 libswitch-perl libtommath0
linux-headers-3.8.0-34 linux-headers-3.8.0-34-generic openbsd-inetd php-auth
php-mail-mime php-mail-mimedecode php-net-smtp php-net-socket php5-intl
php5-ldap php5-mcrypt php5-mysqlnd python-apport python-gi
python-gnupginterface python-httplib2 python-keyring python-launchpadlib
python-lazr.restfulclient python-lazr.uri python-oauth python-problem-report
python-wadllib python-zope.interface roundcube roundcube-core
roundcube-mysql roundcube-plugins rrdtool samba4 slapd slapd-smbk5pwd
sshpass tinymce ttf-dejavu-core update-manager-core vsftpd zbwmonitor
Verwenden Sie »apt-get autoremove«, um sie zu entfernen.
0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
3 nicht vollständig installiert oder entfernt.
Nach dieser Operation werden 0 B Plattenplatz zusätzlich benutzt.
linux-image-extra-3.13.0-65-generic (3.13.0-65.106) wird eingerichtet ...
run-parts: executing /etc/kernel/postinst.d/apt-auto-removal 3.13.0-65-generic /boot/vmlinuz-3.13.0-65-generic
run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.13.0-65-generic /boot/vmlinuz-3.13.0-65-generic
update-initramfs: Generating /boot/initrd.img-3.13.0-65-generic
gzip: stdout: No space left on device
E: mkinitramfs failure cpio 141 gzip 1
update-initramfs: failed for /boot/initrd.img-3.13.0-65-generic with 1.
run-parts: /etc/kernel/postinst.d/initramfs-tools exited with return code 1
dpkg: Fehler beim Bearbeiten des Paketes linux-image-extra-3.13.0-65-generic (--configure):
Unterprozess installiertes post-installation-Skript gab den Fehlerwert 1 zurück
dpkg: Abhängigkeitsprobleme verhindern Konfiguration von linux-image-generic:
linux-image-generic hängt ab von linux-image-extra-3.13.0-65-generic; aber:
Paket linux-image-extra-3.13.0-65-generic ist noch nicht konfiguriert.
dpkg: Fehler beim Bearbeiten des Paketes linux-image-generic (--configure):
Abhängigkeitsprobleme - verbleibt unkonfiguriert
dpkg: Abhängigkeitsprobleme verhindern Konfiguration von linux-generic:
linux-generic hängt ab von linux-image-generic (= 3.13.0.65.71); aber:
Paket linux-image-generic ist noch nicht konfiguriert.
dpkg: Fehler beim Bearbeiten des Paketes linux-generic (--configure):
Abhängigkeitsprobleme - verbleibt unkonfiguriert
Es wurde kein Apport-Bericht verfasst, da die Fehlermeldung darauf hindeutet, dass dies lediglich ein Folgefehler eines vorherigen Problems ist.
Es wurde kein Apport-Bericht verfasst, da die Fehlermeldung darauf hindeutet, dass dies lediglich ein Folgefehler eines vorherigen Problems ist.
Fehler traten auf beim Bearbeiten von:
linux-image-extra-3.13.0-65-generic
linux-image-generic
linux-generic
E: Sub-process /usr/bin/dpkg returned an error code (1)
2015/10/10 12:11:12 Zentyal upgrade failed. Full log at /var/log/zentyal/upgrade.log.
Auf der root platte sind noch 38GB frei. Daran kanns wohl nicht liegen..... ?
Bitte um Tips....
33
Installation and Upgrades / what is the latest mail and user corner update doing?
« on: August 10, 2014, 12:37:27 pm »
Hi,
I updated everything to Zentyal 3.5.2 recently, which was a bit of a hassle, a few days ago, and now two more modules are recommended to being updated: Mail module and user corner.
But I don't know exactly what the update is going to do, and I fear troubles.
So I won't do the update until I know what will happen - will anything be removed, etc.?
Please, let me know what the update is doing.
I updated everything to Zentyal 3.5.2 recently, which was a bit of a hassle, a few days ago, and now two more modules are recommended to being updated: Mail module and user corner.
But I don't know exactly what the update is going to do, and I fear troubles.
So I won't do the update until I know what will happen - will anything be removed, etc.?
Please, let me know what the update is doing.
34
Installation and Upgrades / Zentyal upgrade 3.3 -> 3.5 - external mail fetching gone? crontab errors? fix?
« on: August 05, 2014, 06:09:59 pm »
Hi,
I upgraded from Zentyal 3.3 to 3.4 and immidely to 3.5.2 today; now, Zentyal does not fetch external mails, which is totally essential to me.
I noticed that I got some mails with errors:
Date: Tue, 5 Aug 2014 16:00:01 +0200 (CEST)
From: Cron Daemon <root@mail.ic.com>
To: root@mail.ic.com
Subject: Cron <root@srv01> /usr/share/zentyal-users/slave-sync
defined(@array) is deprecated at /usr/share/perl5/Log/Log4perl/Config.pm line 864.
(Maybe you should just omit the defined()?)
Perl API version v5.14.0 of 1 does not match v5.18.0 at /usr/lib/perl/5.18/DynaLoader.pm line 207.
Compilation failed in require at /usr/share/perl5/EBox/Sudo.pm line 25.
BEGIN failed--compilation aborted at /usr/share/perl5/EBox/Sudo.pm line 25.
Compilation failed in require at /usr/share/perl5/EBox/Module/Base.pm line 28.
BEGIN failed--compilation aborted at /usr/share/perl5/EBox/Module/Base.pm line 28.
Compilation failed in require at (eval 19) line 2.
...propagated at /usr/share/perl/5.18/base.pm line 83.
BEGIN failed--compilation aborted at /usr/share/perl5/EBox/Module/Config.pm line 20.
Compilation failed in require at (eval 18) line 2.
...propagated at /usr/share/perl/5.18/base.pm line 83.
BEGIN failed--compilation aborted at /usr/share/perl5/EBox/GlobalImpl.pm line 21.
Compilation failed in require at /usr/share/perl5/EBox/Global.pm line 22.
BEGIN failed--compilation aborted at /usr/share/perl5/EBox/Global.pm line 22.
Compilation failed in require at /usr/share/zentyal-users/slave-sync line 27.
BEGIN failed--compilation aborted at /usr/share/zentyal-users/slave-sync line 27.
----------next mail:
Date: Tue, 5 Aug 2014 16:01:02 +0200 (CEST)
From: Cron Daemon <root@mail.ic.com>
To: root@mail.ic.com
Subject: Cron <root@srv01> [ -x /usr/share/zentyal-mail/fetchmail-update ] && /usr/share/zentyal-mail/fetchmail-update
Can't call method "isEnabled" on an undefined value at /usr/share/zentyal-mail/fetchmail-update line 16, <GEN0> line 1
---------next
Date: Tue, 5 Aug 2014 16:05:01 +0200 (CEST)
From: Cron Daemon <root@mail.ic.com>
To: root@mail.ic.com
Subject: Cron <root@srv01> /usr/share/zentyal-users/slave-sync
/bin/sh: 1: /usr/share/zentyal-users/slave-sync: not found
------------- End of mail
So what to do to get fetching of external mail to work again?
I upgraded from Zentyal 3.3 to 3.4 and immidely to 3.5.2 today; now, Zentyal does not fetch external mails, which is totally essential to me.
I noticed that I got some mails with errors:
Date: Tue, 5 Aug 2014 16:00:01 +0200 (CEST)
From: Cron Daemon <root@mail.ic.com>
To: root@mail.ic.com
Subject: Cron <root@srv01> /usr/share/zentyal-users/slave-sync
defined(@array) is deprecated at /usr/share/perl5/Log/Log4perl/Config.pm line 864.
(Maybe you should just omit the defined()?)
Perl API version v5.14.0 of 1 does not match v5.18.0 at /usr/lib/perl/5.18/DynaLoader.pm line 207.
Compilation failed in require at /usr/share/perl5/EBox/Sudo.pm line 25.
BEGIN failed--compilation aborted at /usr/share/perl5/EBox/Sudo.pm line 25.
Compilation failed in require at /usr/share/perl5/EBox/Module/Base.pm line 28.
BEGIN failed--compilation aborted at /usr/share/perl5/EBox/Module/Base.pm line 28.
Compilation failed in require at (eval 19) line 2.
...propagated at /usr/share/perl/5.18/base.pm line 83.
BEGIN failed--compilation aborted at /usr/share/perl5/EBox/Module/Config.pm line 20.
Compilation failed in require at (eval 18) line 2.
...propagated at /usr/share/perl/5.18/base.pm line 83.
BEGIN failed--compilation aborted at /usr/share/perl5/EBox/GlobalImpl.pm line 21.
Compilation failed in require at /usr/share/perl5/EBox/Global.pm line 22.
BEGIN failed--compilation aborted at /usr/share/perl5/EBox/Global.pm line 22.
Compilation failed in require at /usr/share/zentyal-users/slave-sync line 27.
BEGIN failed--compilation aborted at /usr/share/zentyal-users/slave-sync line 27.
----------next mail:
Date: Tue, 5 Aug 2014 16:01:02 +0200 (CEST)
From: Cron Daemon <root@mail.ic.com>
To: root@mail.ic.com
Subject: Cron <root@srv01> [ -x /usr/share/zentyal-mail/fetchmail-update ] && /usr/share/zentyal-mail/fetchmail-update
Can't call method "isEnabled" on an undefined value at /usr/share/zentyal-mail/fetchmail-update line 16, <GEN0> line 1
---------next
Date: Tue, 5 Aug 2014 16:05:01 +0200 (CEST)
From: Cron Daemon <root@mail.ic.com>
To: root@mail.ic.com
Subject: Cron <root@srv01> /usr/share/zentyal-users/slave-sync
/bin/sh: 1: /usr/share/zentyal-users/slave-sync: not found
------------- End of mail
So what to do to get fetching of external mail to work again?
35
German / email password nicht geändert?
« on: May 30, 2014, 03:37:40 pm »
Folgende Konfiguration:
* Jeder User hat einen lokalen Account: user1, user2, user@lokaldomain.lan
* Kerberos/Samba rennt
* Eine lokale Domäne lokaldomain.lan existiert
Wir melden uns auf der lokalen Domäne am Win-Client per Kerberos an, erstellen ein Thunderbird-Konto, folgendermaßen:
* user1@lokaldomain.lan
---> der User1 holt externe mails von GMX.DE ab
---> landen am lokalen Zentyal-Server, welcher sie abholt
---> zum *ANTWORTEN* existiert im Thunderbird eine Zweitidentität : "userX@externe-domain.COM" der wird nur zum VERSENDEN verwendet, ist aber die Standardidentität des users "userX@lokaledomain.LAN" !
Empfangen tut also der lokale ".lan" Benutzer, ANTWORTEN tut dessen Zweitidentität und GESPEICHERT wird das gesendete auf der Kerberos-Domäne dank servergespeicherte Profile.
Das funktioniert soweit, so gut.
Jetzt hat aber der lokale Kerberos-Benutzer "user1" sein password von "xxxxxxxxxxxxxxx" auf "yyyyyyyyyyyyyyy" geändert.
Folge: Mozilla Thunderbird regt sich auf, daß er keine Verbindung zum Zentyal bekommt.
Also: Test : "Alle gespeicherten Passwörter löschen" ---> es stellt sich heraus, daß zum Abholen der Mails noch immer das alte Kerberos-Password "xxxxxxxxxx" notwendig ist.
Was nun?
Wie kriege ich Zentyal dazu, das neue Password zum Mail-Abholen zu verwenden?
* Jeder User hat einen lokalen Account: user1, user2, user@lokaldomain.lan
* Kerberos/Samba rennt
* Eine lokale Domäne lokaldomain.lan existiert
Wir melden uns auf der lokalen Domäne am Win-Client per Kerberos an, erstellen ein Thunderbird-Konto, folgendermaßen:
* user1@lokaldomain.lan
---> der User1 holt externe mails von GMX.DE ab
---> landen am lokalen Zentyal-Server, welcher sie abholt
---> zum *ANTWORTEN* existiert im Thunderbird eine Zweitidentität : "userX@externe-domain.COM" der wird nur zum VERSENDEN verwendet, ist aber die Standardidentität des users "userX@lokaledomain.LAN" !
Empfangen tut also der lokale ".lan" Benutzer, ANTWORTEN tut dessen Zweitidentität und GESPEICHERT wird das gesendete auf der Kerberos-Domäne dank servergespeicherte Profile.
Das funktioniert soweit, so gut.
Jetzt hat aber der lokale Kerberos-Benutzer "user1" sein password von "xxxxxxxxxxxxxxx" auf "yyyyyyyyyyyyyyy" geändert.
Folge: Mozilla Thunderbird regt sich auf, daß er keine Verbindung zum Zentyal bekommt.
Also: Test : "Alle gespeicherten Passwörter löschen" ---> es stellt sich heraus, daß zum Abholen der Mails noch immer das alte Kerberos-Password "xxxxxxxxxx" notwendig ist.
Was nun?
Wie kriege ich Zentyal dazu, das neue Password zum Mail-Abholen zu verwenden?
36
Installation and Upgrades / Backup system does not backup mounted other drive
« on: February 20, 2014, 07:00:01 pm »
Hello,
I have mounted some drive (/dev/sdc1) at /mnt/data1.
I want Zentyal to include this directory, /mnt/data1, for backupping.
Unfortunately, I saw that the backup system only backs up files from anything else but from extra mounted drives.
Is there anything that I can do about it ?
I have mounted some drive (/dev/sdc1) at /mnt/data1.
I want Zentyal to include this directory, /mnt/data1, for backupping.
Unfortunately, I saw that the backup system only backs up files from anything else but from extra mounted drives.
Is there anything that I can do about it ?
37
Installation and Upgrades / Zentyal backup seems to skip external mounted drives to backup
« on: February 19, 2014, 06:49:29 pm »
Hi,
I tried the webinterface to issue a scheduled backup at 18:00 today, and I found out that it would not backup the data from the external drive /mnt/data1 to the FTP-backup server (192.168.x.y:/home/Zentyal)
What *was* backed up, were the other directories I selected.
Any help ?
I tried the webinterface to issue a scheduled backup at 18:00 today, and I found out that it would not backup the data from the external drive /mnt/data1 to the FTP-backup server (192.168.x.y:/home/Zentyal)
What *was* backed up, were the other directories I selected.
Any help ?
38
Installation and Upgrades / added a grp policy object, but cannot delete the empty object
« on: February 18, 2014, 04:57:27 pm »
Under "domain/group policy objects", I added a group policy objeects called "loginscripts".
However, it is empty.
Then I decided to delete that empty object. It is not possible.....
So what to do?
However, it is empty.
Then I decided to delete that empty object. It is not possible.....
So what to do?
39
Installation and Upgrades / [solved] kerberos-login faulty?
« on: February 18, 2014, 02:25:34 pm »
Hello,
I _once_ logged in to my local Win-7-client using the Kerberos System by the local Zentyal server.
Later, I found a local user was created on the harddisk of the Win-7-client; which is not what I wanted to do.
Thus, I simply deleted the c:\users\<username> directory and all its subdirectories.
Maybe that was a mistake. :-(
Now, everytime I try to login as "any kerberos user from the zentyal server" on the Win-7-client, I get the error:
"You were logged on with a temporary profile".
I already deleted all registry keys in HKLM\SW\MS\WindowsNT\CurrentVersion\ProfileList - this does not help me in any way, the error still persists: I can log in on the client, but I am always assigned a temporary profile.![Undecided :-\](https://forum.zentyal.org/Smileys/default/undecided.gif)
I also installed the Microsoft RSAT Tools on the Win7 client, but they refuse to connect to the Zentyal server.
Any advice of just what to do to get my normal Kerberos login back?
At the moment, "klist" only says:
C:\Users\TEMP>klist
Aktuelle Anmelde-ID ist 0:0x75465c
Zwischengespeicherte Tickets: (0)
So, no kerberos-tickets for me, for some unknown reason.
Any advice of just what to do to get a normal, working, kerberos login, is appreciated!
I _once_ logged in to my local Win-7-client using the Kerberos System by the local Zentyal server.
Later, I found a local user was created on the harddisk of the Win-7-client; which is not what I wanted to do.
Thus, I simply deleted the c:\users\<username> directory and all its subdirectories.
Maybe that was a mistake. :-(
Now, everytime I try to login as "any kerberos user from the zentyal server" on the Win-7-client, I get the error:
"You were logged on with a temporary profile".
I already deleted all registry keys in HKLM\SW\MS\WindowsNT\CurrentVersion\ProfileList - this does not help me in any way, the error still persists: I can log in on the client, but I am always assigned a temporary profile.
![Undecided :-\](https://forum.zentyal.org/Smileys/default/undecided.gif)
I also installed the Microsoft RSAT Tools on the Win7 client, but they refuse to connect to the Zentyal server.
Any advice of just what to do to get my normal Kerberos login back?
At the moment, "klist" only says:
C:\Users\TEMP>klist
Aktuelle Anmelde-ID ist 0:0x75465c
Zwischengespeicherte Tickets: (0)
So, no kerberos-tickets for me, for some unknown reason.
Any advice of just what to do to get a normal, working, kerberos login, is appreciated!
40
Installation and Upgrades / [SOLVED] Roundcube webmail: "Database error!"
« on: February 17, 2014, 03:11:12 pm »
Hello,
Today, I cannot log in to Webmail. Trying to do so, I get the error:
"DATABASE ERROR: CONNECTION FAILED!
Unable to connect to the database!
Please contact your server-administrator."
From the logfile /var/log/roundcube:
root@srv01:/var/log/roundcube# less errors
[17-Feb-2014 14:15:25 +0100]: DB Error: [1286] Unknown storage engine 'InnoDB' (SQL Query: SELECT vars, ip, changed FROM session WHERE sess_id = 'gqr62iffqi1r4rshluugms1ip3') in /usr/share/roundcube/program/lib/Roundcube/rcube_db.php on line 417 (GET /webmail/)
[17-Feb-2014 14:15:25 +0100]: DB Error: [1286] Unknown storage engine 'InnoDB' (GET /webmail/)
[17-Feb-2014 14:15:25 +0100]: DB Error: [1286] Unknown storage engine 'InnoDB' (SQL Query: INSERT INTO session (sess_id, vars, ip, created, changed) VALUES ('gqr62iffqi1r4rshluugms1ip3', 'dGVtcHxiOjE7bGFuZ3VhZ2V8czo1OiJkZV9ERSI7dGFza3xzOjU6ImxvZ2luIjs=', '192.168.0.139', '2014-02-17 14:15:25', '2014-02-17 14:15:25')) in /usr/share/roundcube/program/lib/Roundcube/rcube_db.php on line 417 (GET /webmail/)
[17-Feb-2014 14:15:52 +0100]: DB Error: [1286] Unknown storage engine 'InnoDB' (SQL Query: SELECT vars, ip, changed FROM session WHERE sess_id = 'gqr62iffqi1r4rshluugms1ip3') in /usr/share/roundcube/program/lib/Roundcube/rcube_db.php on line 417 (GET /webmail/)
[17-Feb-2014 14:15:52 +0100]: DB Error: [1286] Unknown storage engine 'InnoDB' (GET /webmail/)
[17-Feb-2014 14:15:52 +0100]: DB Error: [1286] Unknown storage engine 'InnoDB' (SQL Query: INSERT INTO session (sess_id, vars, ip, created, changed) VALUES ('gqr62iffqi1r4rshluugms1ip3', 'dGVtcHxiOjE7bGFuZ3VhZ2V8czo1OiJkZV9ERSI7dGFza3xzOjU6ImxvZ2luIjs=', '192.168.0.139', '2014-02-17 14:15:52', '2014-02-17 14:15:52')) in /usr/share/roundcube/program/lib/Roundcube/rcube_db.php on line 417 (GET /webmail/)
[17-Feb-2014 14:27:30 +0100]: DB Error: SQLSTATE[28000] [1045] Access denied for user 'roundcube'@'localhost' (using password: YES) in /usr/share/roundcube/program/lib/Roundcube/rcube_db.php on line 155 (GET /webmail/)
[17-Feb-2014 14:27:30 +0100]: DB Error: SQLSTATE[28000] [1045] Access denied for user 'roundcube'@'localhost' (using password: YES) (GET /webmail/)
[17-Feb-2014 14:28:20 +0100]: DB Error: SQLSTATE[28000] [1045] Access denied for user 'roundcube'@'localhost' (using password: YES) in /usr/share/roundcube/program/lib/Roundcube/rcube_db.php on line 155 (GET /webmail/)
[17-Feb-2014 14:28:20 +0100]: DB Error: SQLSTATE[28000] [1045] Access denied for user 'roundcube'@'localhost' (using password: YES) (GET /webmail/)
[17-Feb-2014 14:28:23 +0100]: DB Error: SQLSTATE[28000] [1045] Access denied for user 'roundcube'@'localhost' (using password: YES) in /usr/share/roundcube/program/lib/Roundcube/rcube_db.php on line 155 (GET /webmail/)
[17-Feb-2014 14:28:23 +0100]: DB Error: SQLSTATE[28000] [1045] Access denied for user 'roundcube'@'localhost' (using password: YES) (GET /webmail/)
[17-Feb-2014 14:28:26 +0100]: DB Error: SQLSTATE[28000] [1045] Access denied for user 'roundcube'@'localhost' (using password: YES) in /usr/share/roundcube/program/lib/Roundcube/rcube_db.php on line 155 (GET /webmail/)
[17-Feb-2014 14:28:26 +0100]: DB Error: SQLSTATE[28000] [1045] Access denied for user 'roundcube'@'localhost' (using password: YES) (GET /webmail/)
[17-Feb-2014 14:34:21 +0100]: DB Error: SQLSTATE[28000] [1045] Access denied for user 'roundcube'@'localhost' (using password: YES) in /usr/share/roundcube/program/lib/Roundcube/rcube_db.php on line 155 (GET /webmail/)
[17-Feb-2014 14:34:21 +0100]: DB Error: SQLSTATE[28000] [1045] Access denied for user 'roundcube'@'localhost' (using password: YES) (GET /webmail/)
Can you give me any advice of just what to do to get Webmail back to normal again?
Today, I cannot log in to Webmail. Trying to do so, I get the error:
"DATABASE ERROR: CONNECTION FAILED!
Unable to connect to the database!
Please contact your server-administrator."
From the logfile /var/log/roundcube:
root@srv01:/var/log/roundcube# less errors
[17-Feb-2014 14:15:25 +0100]: DB Error: [1286] Unknown storage engine 'InnoDB' (SQL Query: SELECT vars, ip, changed FROM session WHERE sess_id = 'gqr62iffqi1r4rshluugms1ip3') in /usr/share/roundcube/program/lib/Roundcube/rcube_db.php on line 417 (GET /webmail/)
[17-Feb-2014 14:15:25 +0100]: DB Error: [1286] Unknown storage engine 'InnoDB' (GET /webmail/)
[17-Feb-2014 14:15:25 +0100]: DB Error: [1286] Unknown storage engine 'InnoDB' (SQL Query: INSERT INTO session (sess_id, vars, ip, created, changed) VALUES ('gqr62iffqi1r4rshluugms1ip3', 'dGVtcHxiOjE7bGFuZ3VhZ2V8czo1OiJkZV9ERSI7dGFza3xzOjU6ImxvZ2luIjs=', '192.168.0.139', '2014-02-17 14:15:25', '2014-02-17 14:15:25')) in /usr/share/roundcube/program/lib/Roundcube/rcube_db.php on line 417 (GET /webmail/)
[17-Feb-2014 14:15:52 +0100]: DB Error: [1286] Unknown storage engine 'InnoDB' (SQL Query: SELECT vars, ip, changed FROM session WHERE sess_id = 'gqr62iffqi1r4rshluugms1ip3') in /usr/share/roundcube/program/lib/Roundcube/rcube_db.php on line 417 (GET /webmail/)
[17-Feb-2014 14:15:52 +0100]: DB Error: [1286] Unknown storage engine 'InnoDB' (GET /webmail/)
[17-Feb-2014 14:15:52 +0100]: DB Error: [1286] Unknown storage engine 'InnoDB' (SQL Query: INSERT INTO session (sess_id, vars, ip, created, changed) VALUES ('gqr62iffqi1r4rshluugms1ip3', 'dGVtcHxiOjE7bGFuZ3VhZ2V8czo1OiJkZV9ERSI7dGFza3xzOjU6ImxvZ2luIjs=', '192.168.0.139', '2014-02-17 14:15:52', '2014-02-17 14:15:52')) in /usr/share/roundcube/program/lib/Roundcube/rcube_db.php on line 417 (GET /webmail/)
[17-Feb-2014 14:27:30 +0100]: DB Error: SQLSTATE[28000] [1045] Access denied for user 'roundcube'@'localhost' (using password: YES) in /usr/share/roundcube/program/lib/Roundcube/rcube_db.php on line 155 (GET /webmail/)
[17-Feb-2014 14:27:30 +0100]: DB Error: SQLSTATE[28000] [1045] Access denied for user 'roundcube'@'localhost' (using password: YES) (GET /webmail/)
[17-Feb-2014 14:28:20 +0100]: DB Error: SQLSTATE[28000] [1045] Access denied for user 'roundcube'@'localhost' (using password: YES) in /usr/share/roundcube/program/lib/Roundcube/rcube_db.php on line 155 (GET /webmail/)
[17-Feb-2014 14:28:20 +0100]: DB Error: SQLSTATE[28000] [1045] Access denied for user 'roundcube'@'localhost' (using password: YES) (GET /webmail/)
[17-Feb-2014 14:28:23 +0100]: DB Error: SQLSTATE[28000] [1045] Access denied for user 'roundcube'@'localhost' (using password: YES) in /usr/share/roundcube/program/lib/Roundcube/rcube_db.php on line 155 (GET /webmail/)
[17-Feb-2014 14:28:23 +0100]: DB Error: SQLSTATE[28000] [1045] Access denied for user 'roundcube'@'localhost' (using password: YES) (GET /webmail/)
[17-Feb-2014 14:28:26 +0100]: DB Error: SQLSTATE[28000] [1045] Access denied for user 'roundcube'@'localhost' (using password: YES) in /usr/share/roundcube/program/lib/Roundcube/rcube_db.php on line 155 (GET /webmail/)
[17-Feb-2014 14:28:26 +0100]: DB Error: SQLSTATE[28000] [1045] Access denied for user 'roundcube'@'localhost' (using password: YES) (GET /webmail/)
[17-Feb-2014 14:34:21 +0100]: DB Error: SQLSTATE[28000] [1045] Access denied for user 'roundcube'@'localhost' (using password: YES) in /usr/share/roundcube/program/lib/Roundcube/rcube_db.php on line 155 (GET /webmail/)
[17-Feb-2014 14:34:21 +0100]: DB Error: SQLSTATE[28000] [1045] Access denied for user 'roundcube'@'localhost' (using password: YES) (GET /webmail/)
Can you give me any advice of just what to do to get Webmail back to normal again?
41
Installation and Upgrades / [SOLVED] where is the rest of my crypto_luks file system and how to use it?
« on: February 13, 2014, 04:16:16 pm »
Hello,
I told Zentyal to ask for a passphrase for the crypted drive since he installed himself to a crypted drive.
fdisk looks like this:
I decided to use about 113 GB for the main system:
df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/srv01--vg-root 113G 2,3G 105G 3% /
Now, where are the other unused (500GB-113GB) from the drive gone to, and how can I use them, manually?
I would love to add another crypted partition in that space somehwere (crypted with some other passphrase and other crypt mechanism). Is that possible, and if so, how to do it ?
I told Zentyal to ask for a passphrase for the crypted drive since he installed himself to a crypted drive.
fdisk looks like this:
Quote
Disk /dev/sda: 499.6 GB, 499558383616 bytes
255 heads, 63 sectors/track, 60734 cylinders, total 975699968 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x00006ecf
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 499711 248832 83 Linux
/dev/sda2 501758 975697919 487598081 5 Extended
Partition 2 does not start on physical sector boundary.
/dev/sda5 501760 975697919 487598080 83 Linux
I decided to use about 113 GB for the main system:
df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/srv01--vg-root 113G 2,3G 105G 3% /
Now, where are the other unused (500GB-113GB) from the drive gone to, and how can I use them, manually?
I would love to add another crypted partition in that space somehwere (crypted with some other passphrase and other crypt mechanism). Is that possible, and if so, how to do it ?
42
German / email gehen entweder nach aussen oder nach innen aber nicht beides
« on: February 12, 2014, 04:53:40 pm »
Folgendes:
Eine Domain "domain.com" existiert, gehostet bei sagen wir "strato.de"
Dort wird vom Exim Server mail abgeholt und auch verschickt.
Es existiert eine lokale Zentyal domain: domain.lan , 192.168.x.x , innerhalb der existiert ein server.domain.lan - zentyal server
Er soll mails senden, abholen, von externen konten abholen, er soll sowohl interne mails als auch externe mails handhaben.
Probleme:
Derzeit verschickt er mails nur nach extern korrekt, die kommen auch extern, sagen wir bei test@gmx.de an.
Wenn test@gmx.de antwortet, sagen wir, dem sender-user@domain.com - kommt das nie an, obwohl beiim entsprechenden lokalen user das "get mail from external accounts" alles korrekt eingestellt ist.
Wenn was nach intern verschickt wird, z.b. von user@domain.lan nach user2@domain.lan sagt der Zentyal webmailer zwar "successfully delivered" und es gibt keinen Fehler irgendwo, aber es kommt nie an.
Also ich kann mails ENTWEDER über smarthost von intern nach extern verschicken, ODER wenn ich smarthost leer lasse kann ich mails von intern nach intern verschicken. ABER beides, sowohl von intern nach intern ODER nach aussen verschicken kann ich nicht.
Es hängt offenbar davon ab, ob die "SMARTHOST" parameter eingestellt sind oder nicht.
Relaying von virtuellen Domains ist AN.
E-mail /virtuelle domains ist bei mir auf "domain.lan" und "domain.local" eingestellt.
Irgendwelche tips ?
Eine Domain "domain.com" existiert, gehostet bei sagen wir "strato.de"
Dort wird vom Exim Server mail abgeholt und auch verschickt.
Es existiert eine lokale Zentyal domain: domain.lan , 192.168.x.x , innerhalb der existiert ein server.domain.lan - zentyal server
Er soll mails senden, abholen, von externen konten abholen, er soll sowohl interne mails als auch externe mails handhaben.
Probleme:
Derzeit verschickt er mails nur nach extern korrekt, die kommen auch extern, sagen wir bei test@gmx.de an.
Wenn test@gmx.de antwortet, sagen wir, dem sender-user@domain.com - kommt das nie an, obwohl beiim entsprechenden lokalen user das "get mail from external accounts" alles korrekt eingestellt ist.
Wenn was nach intern verschickt wird, z.b. von user@domain.lan nach user2@domain.lan sagt der Zentyal webmailer zwar "successfully delivered" und es gibt keinen Fehler irgendwo, aber es kommt nie an.
Also ich kann mails ENTWEDER über smarthost von intern nach extern verschicken, ODER wenn ich smarthost leer lasse kann ich mails von intern nach intern verschicken. ABER beides, sowohl von intern nach intern ODER nach aussen verschicken kann ich nicht.
Es hängt offenbar davon ab, ob die "SMARTHOST" parameter eingestellt sind oder nicht.
Relaying von virtuellen Domains ist AN.
E-mail /virtuelle domains ist bei mir auf "domain.lan" und "domain.local" eingestellt.
Irgendwelche tips ?
43
Installation and Upgrades / cannot send mail from internal network to internet
« on: February 12, 2014, 11:43:47 am »
Hello,
Finally, Zentyal fetches my mail from external accounts and puts it to some internal account. Hooray!
But, answering these mails, something goes wrong when sending these mails.
Here is the error log:
21822281A4E 1559 Wed Feb 12 11:28:16 user@myzentyaldomain.lan aloh@some-maill.net host mail.some-mail.net[65.0.1.2] said: 450 4.7.1 Client host rejected: cannot find your hostname, [myip1.2.35.23] (in reply to RCPT TO command)
424EA281A31 1043 Tue Feb 11 18:45:01 user@myzentyaldomain.lan TO-USER@gmx.net host mx00.gmx.net[213.165.67.99] refused to talk to me: 554-gmx.net (mxgmx004) Nemesis ESMTP Service not available 554-No SMTP service 554 invalid DNS PTR resource record
Any advice of what to do to get rid of these errors and send some mail ?
Finally, Zentyal fetches my mail from external accounts and puts it to some internal account. Hooray!
But, answering these mails, something goes wrong when sending these mails.
Here is the error log:
21822281A4E 1559 Wed Feb 12 11:28:16 user@myzentyaldomain.lan aloh@some-maill.net host mail.some-mail.net[65.0.1.2] said: 450 4.7.1 Client host rejected: cannot find your hostname, [myip1.2.35.23] (in reply to RCPT TO command)
424EA281A31 1043 Tue Feb 11 18:45:01 user@myzentyaldomain.lan TO-USER@gmx.net host mx00.gmx.net[213.165.67.99] refused to talk to me: 554-gmx.net (mxgmx004) Nemesis ESMTP Service not available 554-No SMTP service 554 invalid DNS PTR resource record
Any advice of what to do to get rid of these errors and send some mail ?
44
Installation and Upgrades / [SOLVED] howto edit bootloader config so as to get cmd-prompt of harddisk pwd?
« on: February 11, 2014, 04:36:40 pm »
Hello,
Finally, I reinstalled Zentyal 3.3 to a server board (Microsystem, Dual Xeon, .... LSI Megaraid Raid system).
I was selecting "encrypt partition with password" since it contains sensitive information.
However, that was also the problem, because the boot loader switches to Graphics mode (VGA) and thus I cannot read the prompt where I could enter the harddisk password.
Thus, my option is heretofore to edit the boot commands in the GRUB boot editor:
menuentry 'Ubuntu, with Linux 3.8.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
* gfxmode $linux_gfx_mode ----------> I removed this line
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 6190180d-bb5c-4859-8e58-7a7a23fb4d32
* linux /vmlinuz-3.8.0-29-generic root=/dev/mapper/srv01--vg-root ro quiet splash $vt_handoff
initrd /initrd.img-3.8.0-29-generic
Also I removed the option "quiet splash" from the "linux /vmlinuz...." line.
I guess it is very un-elegant to manually edit the boot menu each time you reboot the server.
![Wink ;)](https://forum.zentyal.org/Smileys/default/wink.gif)
Thus: Which options do I have to edit the boot menu? The file "boot/grub/grub.cfg" clearly stated: "DO NOT EDIT THIS FILE", so I will not; I'll rather have the server running at the mo.
Please let me know how to properly edit the grub boot menu in Zentyal.
Finally, I reinstalled Zentyal 3.3 to a server board (Microsystem, Dual Xeon, .... LSI Megaraid Raid system).
I was selecting "encrypt partition with password" since it contains sensitive information.
However, that was also the problem, because the boot loader switches to Graphics mode (VGA) and thus I cannot read the prompt where I could enter the harddisk password.
Thus, my option is heretofore to edit the boot commands in the GRUB boot editor:
menuentry 'Ubuntu, with Linux 3.8.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
* gfxmode $linux_gfx_mode ----------> I removed this line
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 6190180d-bb5c-4859-8e58-7a7a23fb4d32
* linux /vmlinuz-3.8.0-29-generic root=/dev/mapper/srv01--vg-root ro quiet splash $vt_handoff
initrd /initrd.img-3.8.0-29-generic
Also I removed the option "quiet splash" from the "linux /vmlinuz...." line.
I guess it is very un-elegant to manually edit the boot menu each time you reboot the server.
![Tongue :P](https://forum.zentyal.org/Smileys/default/tongue.gif)
![Wink ;)](https://forum.zentyal.org/Smileys/default/wink.gif)
Thus: Which options do I have to edit the boot menu? The file "boot/grub/grub.cfg" clearly stated: "DO NOT EDIT THIS FILE", so I will not; I'll rather have the server running at the mo.
Please let me know how to properly edit the grub boot menu in Zentyal.
45
Installation and Upgrades / undefined symbol in logfile , unable to load dynamic library ; lots of errors
« on: February 10, 2014, 08:32:33 pm »I repeatedly get this error in my logs:
Subject: Cron <root@srv01> [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete
Content-Type: text/plain; charset=ANSI_X3.4-1968
X-Cron-Env: <SHELL=/bin/sh>
X-Cron-Env: <HOME=/root>
X-Cron-Env: <PATH=/usr/bin:/bin>
X-Cron-Env: <LOGNAME=root>
Message-Id: <20140210183901.8E9831C0BDA@srv01.mylan.lan>
Date: Mon, 10 Feb 2014 19:39:01 +0100 (CET)
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20090626/mapi.so' - /usr/lib/libicalmapi.so.1: undefined symbol: _ZTIN7details18iconv_context_baseE in Unknown on line 0
What to do ?
I also get lots of errors in sogo.log:
Feb 10 14:08:26 sogod [28537]: [ERROR] <0x0x7fb79f9416e0[WOWatchDog]> an exception occured in runloop <NSException: 0x7fb79f7c14d0> NAME:IOException REASON:a problem occurred during db initialization INFO:(null)
Feb 10 14:08:26 sogod [27620]: <0x0x7fb79f864640[WOWatchDogChild]> child 28537 exited
Feb 10 14:08:26 sogod [27620]: <0x0x7fb79f864640[WOWatchDogChild]> avoiding to respawn child before 2014-02-10 14:08:31 +0000
Feb 10 14:08:31 sogod [27620]: <0x0x7fb79f9416e0[WOWatchDog]> child spawned with pid 28550
2014-02-10 14:08:31.435 sogod[27620] No value specified for 'SOGoProfileURL'
2014-02-10 14:08:31.435 sogod[27620] No value specified for 'OCSFolderInfoURL'
Feb 10 14:08:31 sogod [28550]: [ERROR] <0x0x7fb79f9416e0[WOWatchDog]> an exception occured in runloop <NSException: 0x7fb79f8d4870> NAME:IOException REASON:a problem occurred during db initialization INFO:(null)
Feb 10 14:08:31 sogod [27620]: <0x0x7fb79f864640[WOWatchDogChild]> child 28550 exited
Feb 10 14:08:31 sogod [27620]: <0x0x7fb79f864640[WOWatchDogChild]> avoiding to respawn child before 2014-02-10 14:08:36 +0000
Feb 10 14:08:36 sogod [27620]: <0x0x7fb79f9416e0[WOWatchDog]> child spawned with pid 28551
2014-02-10 14:08:36.435 sogod[27620] No value specified for 'SOGoProfileURL'
2014-02-10 14:08:36.436 sogod[27620] No value specified for 'OCSFolderInfoURL'
Feb 10 14:08:36 sogod [28551]: [ERROR] <0x0x7fb79f9416e0[WOWatchDog]> an exception occured in runloop <NSException: 0x7fb79f7c14d0> NAME:IOException REASON:a problem occurred during db initialization INFO:(null)
Feb 10 14:08:36 sogod [27620]: <0x0x7fb79f864640[WOWatchDogChild]> child 28551 exited
Feb 10 14:08:36 sogod [27620]: <0x0x7fb79f864640[WOWatchDogChild]> avoiding to respawn child before 2014-02-10 14:08:41 +0000
Feb 10 14:08:41 sogod [27620]: <0x0x7fb79f9416e0[WOWatchDog]> child spawned with pid 28552
2014-02-10 14:08:41.436 sogod[27620] No value specified for 'SOGoProfileURL'
2014-02-10 14:08:41.436 sogod[27620] No value specified for 'OCSFolderInfoURL'
Feb 10 14:08:41 sogod [28552]: [ERROR] <0x0x7fb79f9416e0[WOWatchDog]> an exception occured in runloop <NSException: 0x7fb79f8d4870> NAME:IOException REASON:a problem occurred during db initialization INFO:(null)
Feb 10 14:08:41 sogod [27620]: <0x0x7fb79f864640[WOWatchDogChild]> child 28552 exited
Feb 10 14:08:41 sogod [27620]: <0x0x7fb79f864640[WOWatchDogChild]> avoiding to respawn child before 2014-02-10 14:08:46 +0000
Feb 10 14:08:46 sogod [27620]: <0x0x7fb79f9416e0[WOWatchDog]> child spawned with pid 28558
2014-02-10 14:08:46.436 sogod[27620] No value specified for 'SOGoProfileURL'
2014-02-10 14:08:46.436 sogod[27620] No value specified for 'OCSFolderInfoURL'
Feb 10 14:08:46 sogod [28558]: [ERROR] <0x0x7fb79f9416e0[WOWatchDog]> an exception occured in runloop <NSException: 0x7fb79f7c14d0> NAME:IOException REASON:a problem occurred during db initialization INFO:(null)
Feb 10 14:08:46 sogod [27620]: <0x0x7fb79f864640[WOWatchDogChild]> child 28558 exited
Feb 10 14:08:46 sogod [27620]: <0x0x7fb79f864640[WOWatchDogChild]> avoiding to respawn child before 2014-02-10 14:08:51 +0000
Feb 10 14:08:51 sogod [27620]: <0x0x7fb79f9416e0[WOWatchDog]> child spawned with pid 28559
2014-02-10 14:08:51.436 sogod[27620] No value specified for 'SOGoProfileURL'
2014-02-10 14:08:51.436 sogod[27620] No value specified for 'OCSFolderInfoURL'
Feb 10 14:08:51 sogod [28559]: [ERROR] <0x0x7fb79f9416e0[WOWatchDog]> an exception occured in runloop <NSException: 0x7fb79f8d4870> NAME:IOException REASON:a problem occurred during db initialization INFO:(null)
From the kernel.log: More errors:
Feb 10 15:55:19 srv01 kernel: [ 29.764026] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:55:25 srv01 kernel: [ 35.776026] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:55:31 srv01 kernel: [ 41.788019] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:55:37 srv01 kernel: [ 47.800047] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:55:42 srv01 kernel: [ 53.029394] ip_tables: (C) 2000-2006 Netfilter Core Team
Feb 10 15:55:42 srv01 kernel: [ 53.091140] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Feb 10 15:55:43 srv01 kernel: [ 53.812049] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:55:49 srv01 kernel: [ 59.824024] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:55:55 srv01 kernel: [ 65.836024] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:56:01 srv01 kernel: [ 71.848051] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:56:07 srv01 kernel: [ 77.860019] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:56:13 srv01 kernel: [ 83.872019] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:56:19 srv01 kernel: [ 89.884016] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:56:25 srv01 kernel: [ 95.896015] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:56:31 srv01 kernel: [ 101.908015] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:56:37 srv01 kernel: [ 107.920046] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:56:43 srv01 kernel: [ 113.932017] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:56:49 srv01 kernel: [ 119.944017] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:56:55 srv01 kernel: [ 125.956018] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:57:01 srv01 kernel: [ 131.968017] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:57:07 srv01 kernel: [ 137.980015] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:57:13 srv01 kernel: [ 143.992014] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:57:19 srv01 kernel: [ 150.004015] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:57:25 srv01 kernel: [ 156.016056] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:57:31 srv01 kernel: [ 162.028015] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:57:37 srv01 kernel: [ 168.040025] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:57:43 srv01 kernel: [ 174.052017] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:57:49 srv01 kernel: [ 180.064017] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
If these errors should say anything to me, let me know
![Tongue :P](https://forum.zentyal.org/Smileys/default/tongue.gif)