Recent Posts
81
Other modules / Primary and Secondary DNS on MS stations
« Last post by juliocp1976 on November 30, 2023, 12:19:21 am »Hello, I have the following scenario: Zentyal 7 with Domain Controller (SRV01) and or Zentyal 7 Additional Domain Controller (SRV02).
On Windows machines I use the primary DNS SRV01 - 172.16.0.100 and secondary DNS 8.8.8.8, so the machines authenticate with SAMBA and browse the internet normally.
As my network is growing to almost 2,000 hosts, I created this Additional server because if the Primary fails or is isolated due to a problem, the Additional takes over.
HOWEVER, if I configure the windows machines DNS1 Primary server and DNS2 Additional, the machines DO NOT browse the internet.
I configured Zentyal according to the manual for it
etc/zentyal/dns.conf
# Example: intnets = 192.168.99.0/24,192.168.98.0/24
intnets = 172.16.0.0/16,192.168.1.0/24
DNS server is set to - Enable transparent DNS cache.
Forwarders - 172.16.0.100, 8.8.8.8, 1,1,1,1
Does anyone know where I can adjust this?
82
Portuguese / DNS Primario e Secundario nas estacoes W
« Last post by juliocp1976 on November 28, 2023, 06:44:08 pm »ola estou com seguinte cenario: Zentyal 7 com Domain Controller (SRV01) e ou Zentyal 7 Additional Domain Controller (SRV02).
Nas maquinas Windows uso o DNS primario o SRV01 - 172.16.0.100 e DNS secundario 8.8.8.8, assim as maquinas se autenticam no SAMBA e navegam na internet normalmente.
Como minha rede esta crescendo quase 2.000 hosts, fiz esse servidor Adicional pois caso o Primario apresenta falha ou fique isolado por algum problema o Adicional assume.
POREM se eu configuro as maquinas windows DNS1 servidor Primario e DNS2 Adicional as maquinas NAO navegam na internet.
Fiz uma configuração no zentyal conforme o manual para ele
etc/zentyal/dns.conf
# Example: intnets = 192.168.99.0/24,192.168.98.0/24
intnets = 172.16.0.0/16,192.168.1.0/24
Servidor DNS esta setado como - Enable transparent DNS cache.
Forwarders - 172.16.0.100, 8.8.8.8, 1,1,1,1
Alguem sabe onde posso ajustar isso
Nas maquinas Windows uso o DNS primario o SRV01 - 172.16.0.100 e DNS secundario 8.8.8.8, assim as maquinas se autenticam no SAMBA e navegam na internet normalmente.
Como minha rede esta crescendo quase 2.000 hosts, fiz esse servidor Adicional pois caso o Primario apresenta falha ou fique isolado por algum problema o Adicional assume.
POREM se eu configuro as maquinas windows DNS1 servidor Primario e DNS2 Adicional as maquinas NAO navegam na internet.
Fiz uma configuração no zentyal conforme o manual para ele
etc/zentyal/dns.conf
# Example: intnets = 192.168.99.0/24,192.168.98.0/24
intnets = 172.16.0.0/16,192.168.1.0/24
Servidor DNS esta setado como - Enable transparent DNS cache.
Forwarders - 172.16.0.100, 8.8.8.8, 1,1,1,1
Alguem sabe onde posso ajustar isso
83
Installation and Upgrades / Re: i cant login on Web Interface -
« Last post by turalyon on November 20, 2023, 10:49:41 am »That is weird. Did you try to set (temporarily) a simple password without any special characters to the local administrator like zentyal2023?
Also, did you check the configuration file /etc/passwd ? Did you restart the webadmin module?
Finally, you might try again to create another local administrator as follows and login to the Zentyal GUI:
—
“This world is ours, and by the Holy Light we will keep it safe, now and forever".
Also, did you check the configuration file /etc/passwd ? Did you restart the webadmin module?
Code: [Select]
sudo zs webadmin restart
sudo zs webadmin status
Finally, you might try again to create another local administrator as follows and login to the Zentyal GUI:
Code: [Select]
sudo useradd -m -d /home/zenadmin -G sudo -s /bin/bash zenadmin
sudo passwd zenadmin
—
“This world is ours, and by the Holy Light we will keep it safe, now and forever".
84
Installation and Upgrades / i cant login on Web Interface -
« Last post by federicososa on November 16, 2023, 04:09:54 pm »Hi everyone,
im trying to login in the web interface, but it keeps saying that the password is incorrect - yeap i check it many times - i can login with the password in the desktop, ssh and as sudo but i can login on the website.
according to the zentyal.log
2023/11/16 15:55:14 DEBUG> PAM.pm:65 Authen::Simple::PAM::check - Failed to authenticate user 'hereMyUsername' using service 'zentyal'. Reason: 'Authentication failure'
2023/11/16 15:55:14 WARN> Auth.pm:277 EBox::Middleware::Auth::_login - Failed login from: 192.168.25.74
Can somebody give a hint? i tried already to make a new user, and give it the rights like the original ZentyalAdmin but still no success..
Thanks!
im trying to login in the web interface, but it keeps saying that the password is incorrect - yeap i check it many times - i can login with the password in the desktop, ssh and as sudo but i can login on the website.
according to the zentyal.log
2023/11/16 15:55:14 DEBUG> PAM.pm:65 Authen::Simple::PAM::check - Failed to authenticate user 'hereMyUsername' using service 'zentyal'. Reason: 'Authentication failure'
2023/11/16 15:55:14 WARN> Auth.pm:277 EBox::Middleware::Auth::_login - Failed login from: 192.168.25.74
Can somebody give a hint? i tried already to make a new user, and give it the rights like the original ZentyalAdmin but still no success..
Thanks!
85
Other modules / Re: Enabling IDS/IPS stops internet on interface
« Last post by turalyon on November 16, 2023, 01:03:55 pm »Hi,
What error are you getting and what version of Zentyal are you using?
—
“This world is ours, and by the Holy Light we will keep it safe, now and forever".
What error are you getting and what version of Zentyal are you using?
—
“This world is ours, and by the Holy Light we will keep it safe, now and forever".
86
Installation and Upgrades / Re: Upgrade 7.0.9 to 7.1 is blocked by pending update
« Last post by Lars Sebastian on November 15, 2023, 02:41:42 pm »Quote
Hi Lars,
Can you send an email to sales@zentyal.com? I would like to analyze this behavior using the official support platform.
Best regards, Daniel Joven.
Hi Daniel,
I just sent the topic by email.
Best Regards,
Lars
87
Other modules / Re: Enabling IDS/IPS stops internet on interface
« Last post by gabor.strama on November 14, 2023, 04:21:47 pm »Hi,
Somebody can help in this case?
I tried to install on a clean install, same result.
I not installed anything only suricata and same result.
BR,
GáborS
Somebody can help in this case?
I tried to install on a clean install, same result.
I not installed anything only suricata and same result.
BR,
GáborS
88
Russian / Не работает VPN (Zentyal 7.0)
« Last post by IIS on November 13, 2023, 11:44:14 am »Приветствую.
Столкнулся с такой проблемой: Установил Zentyal 7.0 , Настроил VPN сервер, пытаюсь подключиться из вне получаю ошибку по тайм ауту. Глушу брандмауэр на зенчале подключение проходит.
пробовал и удалять брандмауэр и vpn настраивал все заново ситуация не меняется. Ради эксперимента установил на другой винт Zentyal 5.0 все заработало сразу "из коробки". Переустанавливать 7.0 с пошаговой настройкой не вариант (Поднят домен + Шары с хитрым доступом)
Переустановка с загрузкой сохраненной конфигурации приводит к том уже результату.
Проблема в брандмауэр но как его поправить не пойму.
И что самое интересное если через оснастку в брандмауэр добавить доступ допустим к ssh или ftp то доступ работает. (А включение отключение модуля VPN ни к чему не приводит)
Есть мысли по данному поводу?
Столкнулся с такой проблемой: Установил Zentyal 7.0 , Настроил VPN сервер, пытаюсь подключиться из вне получаю ошибку по тайм ауту. Глушу брандмауэр на зенчале подключение проходит.
пробовал и удалять брандмауэр и vpn настраивал все заново ситуация не меняется. Ради эксперимента установил на другой винт Zentyal 5.0 все заработало сразу "из коробки". Переустанавливать 7.0 с пошаговой настройкой не вариант (Поднят домен + Шары с хитрым доступом)
Переустановка с загрузкой сохраненной конфигурации приводит к том уже результату.
Проблема в брандмауэр но как его поправить не пойму.
И что самое интересное если через оснастку в брандмауэр добавить доступ допустим к ssh или ftp то доступ работает. (А включение отключение модуля VPN ни к чему не приводит)
Есть мысли по данному поводу?
89
Installation and Upgrades / Re: Upgrade 7.0.9 to 7.1 is blocked by pending update
« Last post by Daniel Joven on November 10, 2023, 02:07:16 pm »Hi Daniel,
sorry for the late answer (business trip): no changes - same behavior as before.
Best Regards,
Lars
Hi Lars,
Can you send an email to sales@zentyal.com? I would like to analyze this behavior using the official support platform.
Best regards, Daniel Joven.
90
Installation and Upgrades / Re: PPPoE with static IP
« Last post by foeke on November 07, 2023, 10:25:46 am »Usually...
But not in this case. Not when It is a fixed IP from a range. It might not be common. But it is also not strange.
My previous serverOS (CENTOS based) had the inputfields when choosing PPPoE.
So, not possible?
But not in this case. Not when It is a fixed IP from a range. It might not be common. But it is also not strange.
My previous serverOS (CENTOS based) had the inputfields when choosing PPPoE.
So, not possible?