Messages

31

German / SOGo Webfrontend - Zugriff von Außen

« on: March 30, 2014, 10:23:15 pm »

Hallo,

wie kann ich dem Zentyal-SOGo Webfrontend beibringen, Logins auch über https aus dem Internet entgegen zu nehmen?

Im lokalen Netz klappt der Zugriff.
Die Firewall lässt momentan http, https und ftp aus dem I-Net zu, das reicht aber für SOGo irgendwie nicht.

Schöne Grüße aus Leipzig

Denis

32

Installation and Upgrades / activate Module zentyal-mail failed

« on: March 27, 2014, 08:09:23 pm »

Hallo,

because of a "very fast click" I removed all email stuff.

I reinstalled all and as I want to activate it then I run in following error:
Failed to enable E-Mail: Address liebetrau@dantschke.org is already in use by the Benutzer liebetrau

But I cant see this user. I know that I created this user with zentyal webfrontend.

How can i delete this user or his mail address via script?

with best regards

Denis

by the way I'm using zentyal 3.4 64bit

33

Installation and Upgrades / Re: Can't add new users...

« on: March 25, 2014, 01:45:32 pm »

Hallo,
is there nobody who can take a look to the attached trace ? The problem is that I need to create 2 new users and I don't want to solve this problem via complete reinstall of this server...

with best regards

Denis

34

Installation and Upgrades / Re: Can't add new users...

« on: March 24, 2014, 09:37:37 pm »

Hallo Robb,

my problem is that I'm not able to save a new user.
I don't have more than 500 accounts (only 14)
If I want to save I get the message that an unexpected error has occurred....

Under technical details I see the message I posted before.
There is written something about a wrong SID ...
The message behind the trace button:

Code: [Select]


Trace

    root command echo 'dn: CN=
    changetype: add
    xidNumber: 50000
    objectSid:
    objectClass: sidMap
    type: ID_TYPE_UID
    cn:
    ' | ldbmodify -H /opt/samba4/private/idmap.ldb failed.
    Error output: Failed to parse ldif
    Command output: GENSEC backend 'gssapi_spnego' registered
    GENSEC backend 'gssapi_krb5' registered
    GENSEC backend 'gssapi_krb5_sasl' registered
    GENSEC backend 'schannel' registered
    GENSEC backend 'spnego' registered
    GENSEC backend 'ntlmssp' registered
    GENSEC backend 'krb5' registered
    GENSEC backend 'fake_gssapi_krb5' registered
    string_to_sid: SID is not in a valid format
    Modify failed after processing 0 records
    .
    Exit value: 1 at /usr/share/perl5/Error.pm line 182
    Error::throw('EBox::Exceptions::Sudo::Command', 'cmd', 'echo \'dn: CN=\x{a}changetype: add\x{a}xidNumber: 50000\x{a}objectSid: \x{a}o...', 'output', 'ARRAY(0x7fa4ba1e4718)', 'error', 'ARRAY(0x7fa4b993ce88)', 'exitValue', 1, ...) called at /usr/share/perl5/EBox/Sudo.pm line 233
    EBox::Sudo::_rootError('/usr/bin/sudo -p sudo: /var/lib/zentyal/tmp/T3MI4HKkVu.cmd 2>...', 'echo \'dn: CN=\x{a}changetype: add\x{a}xidNumber: 50000\x{a}objectSid: \x{a}o...', 256, 'ARRAY(0x7fa4ba1e4718)', 'ARRAY(0x7fa4b993ce88)') called at /usr/share/perl5/EBox/Sudo.pm line 202
    EBox::Sudo::_root(1, 'echo \'dn: CN=\x{a}changetype: add\x{a}xidNumber: 50000\x{a}objectSid: \x{a}o...') called at /usr/share/perl5/EBox/Sudo.pm line 153
    EBox::Sudo::root('echo \'dn: CN=\x{a}changetype: add\x{a}xidNumber: 50000\x{a}objectSid: \x{a}o...') called at /usr/share/perl5/EBox/LDB/IdMapDb.pm line 43
    EBox::LDB::IdMapDb::setupNameMapping('EBox::LDB::IdMapDb=HASH(0x7fa4ba086230)', undef, 'ID_TYPE_UID', 50000) called at /usr/share/perl5/EBox/Samba/User.pm line 245
    EBox::Samba::User::setupUidMapping('EBox::Samba::User=HASH(0x7fa4b9d95ec8)', 50000) called at /usr/share/perl5/EBox/SambaLdapUser.pm line 78
    EBox::SambaLdapUser::_preAddUser('EBox::SambaLdapUser=HASH(0x7fa4ba1d0980)', 'Net::LDAP::Entry=HASH(0x7fa4ba1792a8)') called at /usr/share/perl5/EBox/UsersAndGroups.pm line 1219
    EBox::UsersAndGroups::notifyModsPreLdapUserBase('EBox::UsersAndGroups=HASH(0x7fa4b88a9528)', 'preAddUser', 'Net::LDAP::Entry=HASH(0x7fa4ba1792a8)', undef, undef) called at /usr/share/perl5/EBox/UsersAndGroups/User.pm line 672
    EBox::UsersAndGroups::User::create('EBox::UsersAndGroups::User', 'HASH(0x7fa4b9dbe2f8)', 0) called at /usr/share/perl5/EBox/CGI/UsersAndGroups/AddUser.pm line 73
    EBox::CGI::UsersAndGroups::AddUser::_process('EBox::CGI::UsersAndGroups::AddUser=HASH(0x7fa4b98b7338)') called at /usr/share/perl5/EBox/CGI/Base.pm line 286
    EBox::CGI::Base::run('EBox::CGI::UsersAndGroups::AddUser=HASH(0x7fa4b98b7338)') called at /usr/share/perl5/EBox/CGI/Run.pm line 132
    EBox::CGI::Run::run('EBox::CGI::Run', 'UsersAndGroups/AddUser', 'EBox') called at /usr/share/zentyal/cgi/ebox.cgi line 37
    ModPerl::ROOT::ModPerl::Registry::usr_share_zentyal_cgi_ebox_2ecgi::handler('Apache2::RequestRec=SCALAR(0x7fa4b9ab7f58)') called at /usr/lib/perl5/ModPerl/RegistryCooker.pm line 204
    eval {...} called at /usr/lib/perl5/ModPerl/RegistryCooker.pm line 204
    ModPerl::RegistryCooker::run('ModPerl::Registry=HASH(0x7fa4b981de68)') called at /usr/lib/perl5/ModPerl/RegistryCooker.pm line 170
    ModPerl::RegistryCooker::default_handler('ModPerl::Registry=HASH(0x7fa4b981de68)') called at /usr/lib/perl5/ModPerl/Registry.pm line 31
    ModPerl::Registry::handler('ModPerl::Registry', 'Apache2::RequestRec=SCALAR(0x7fa4b9ab7f58)') called at -e line 0
    eval {...} called at -e line 0

with best regards Denis

35

Installation and Upgrades / Can't add new users...

« on: March 24, 2014, 08:49:33 pm »

Hallo,

since one week I'm not able to add a new user.
My System is a Zentyal 3.0.32 Server with Samba DC. Is there any possibility to fix this problem?

Code: [Select]


root command echo 'dn: CN= changetype: add xidNumber: 50000 objectSid: objectClass: sidMap type: ID_TYPE_UID cn: ' | ldbmodify -H /opt/samba4/private/idmap.ldb failed. Error output: Failed to parse ldif Command output: GENSEC backend 'gssapi_spnego' registered GENSEC backend 'gssapi_krb5' registered GENSEC backend 'gssapi_krb5_sasl' registered GENSEC backend 'schannel' registered GENSEC backend 'spnego' registered GENSEC backend 'ntlmssp' registered GENSEC backend 'krb5' registered GENSEC backend 'fake_gssapi_krb5' registered string_to_sid: SID is not in a valid format Modify failed after processing 0 records . Exit value: 1

with best regards

Denis

36

Installation and Upgrades / Re: No listen sockets or ports specified

« on: December 05, 2012, 10:04:02 am »

Hallo,

The problem is solved partially...
I restored the modules configuration from backup but now I've got an error for Jabber ldap part:

jabberUid: attribute type undefined

How can I extend my ldap database for jabber? Desinstall and reinstall of jabber module don't help.

best regards

Denis

37

Installation and Upgrades / No listen sockets or ports specified

« on: December 04, 2012, 06:03:20 pm »

Hallo,

I'm using Zentyal 3.0.

After an upgrade of Zentyal modules Core, Users, Mailfilter(?) toda I've got this error in Logfiles:

No listen sockets or ports specified

and when fetchmail is geting the mails then

 Recipient address rejected: User unknown in virtual mailbox table

And the mails are not delivered anymore....

It seems ther is something wrong with ldap too???
 
Can someone give me a hint? I can't start amavis anymore too since this update. Maybe there is something wrong in the new amavis.conf or in postfix part ...

best regards

Denis

38

Installation and Upgrades / Re: dhcp-module shows as stoped and can't be activated

« on: June 21, 2011, 10:57:39 am »

Hallo,

Yes apparmor was the reason ...
There where some files deleted. The whole directory /etc/apparmor.d/ was empty.

I made a copy of this files from other zentyal machine and now all is fine 

thank you for support.

Denis

39

Installation and Upgrades / Re: dhcp-module shows as stoped and can't be activated

« on: June 20, 2011, 11:34:55 pm »

Hallo

I'am not soo familar with apparmor yet ...

 

40

Installation and Upgrades / Re: dhcp-module shows as stoped and can't be activated

« on: June 20, 2011, 11:33:21 pm »

Hallo,

/etc/apparmor.d/usr.sbin.dhcpd3

Code: [Select]

# This profile has been modified by Zentyal Server to provide Dynamic
# DNS feature

#include <tunables/global>

/usr/sbin/dhcpd3 {
  #include <abstractions/base>
  #include <abstractions/nameservice>
  #include <abstractions/ssl_keys>

  capability net_bind_service,
  capability net_raw,
  capability setgid,
  capability setuid,

  network inet raw,
  network packet packet,

  /etc/hosts.allow r,
  /etc/hosts.deny r,

  /etc/dhcp3/ r,
  /etc/dhcp3/** r,
  /etc/dhcpd.conf r,
  /etc/dhcpd_ldap.conf r,

  /usr/sbin/dhcpd3 mr,

  /var/lib/dhcp3/dhcpd.leases* lrw,
  /var/log/ r,
  /var/log/** rw,
  /var/run/dhcp3-server/dhcpd.pid w,

  # LTSP. See:
  # http://www.ltsp.org/~sbalneav/LTSPManual.html
  # https://wiki.edubuntu.org/
  /etc/ltsp/ r,
  /etc/ltsp/** r,
  /etc/dhcpd-k12ltsp.conf r,
  /etc/dhcpd.leases* lrw,
  /ltsp/ r,
  /ltsp/** r,

  # Eucalyptus
  /var/run/eucalyptus/net/ r,
  /var/run/eucalyptus/net/** r,
  /var/run/eucalyptus/net/*.pid lrw,
  /var/run/eucalyptus/net/*.leases* lrw,
  /var/run/eucalyptus/net/*.trace lrw,

  # For dynamic DNS (Zentyal)
  /etc/bind/keys r,

  # For allowing custom tweaking (Zentyal)
  /etc/ebox/dhcp/* r,
}

the directory /etc/apparmor.d/tunables/global is empty ....
there has to be  the global and the home variable - right?

Denis

41

Installation and Upgrades / [solved] dhcp-module shows as stoped and can't be activated

« on: June 20, 2011, 11:07:31 pm »

Hallo,

my problem here ist that the dhcp-module is not working correctly.
In the dashboard the module is shown as stoped an when I try to activate following message:

Code: [Select]

Error restarting service. See /var/log/ebox/ebox.log for more information.

/var/log/ebox/ebox.log

Code: [Select]

2011/06/20 23:01:25 ERROR> RestartService.pm:57 EBox::CGI::EBox::RestartService::__ANON__ - Restart of EBox::DHCP=HASH(0x7f565e3f9070) from dashboard failed: root command /etc/init.d/apparmor restart failed.
Error output: Found reference to variable HOME, but is never declared
 AppArmor parser error for /etc/apparmor.d/usr.sbin.dhcpd3 in /etc/apparmor.d/usr.sbin.dhcpd3 at line 4: Could not open 'tunables/global'

Command output:  * Reloading AppArmor profiles
    ...fail!
.
Exit value: 123

it seems there is a probelm with dhcp-module ...

when I start the dhcp-server by hand

Code: [Select]

/etc/init.d/ebox dhcp restart
the dhcp-server ist starts working and the dhcp-module is shown as stoped.

The dhcp-module is version 2.0.6, installed and activated.

Is this behaviour known?

Denis

42

Installation and Upgrades / Re: Problem: Ldap not indexed

« on: February 25, 2011, 12:19:26 pm »

Hallo,

I solved this problem on this way:

http://muzso.hu/2010/04/26/fixing-bdb_equality_candidates-errors-on-your-openldap-server

but in my case the index-files of ldap-tree are in /var/lib/ldap (for changing the rights) and not in /var/lib/slapd as described in this Howto

regards Denis

43

Installation and Upgrades / Problem: Ldap not indexed

« on: February 21, 2011, 02:49:08 pm »

Hallo
I'm new in this Forum and not so expirienced in ldap.

I hav following problem:

Code: [Select]

Feb 21 14:25:35 dmt1 slapd[14121]: <= bdb_equality_candidates: (zarafaAccount) not indexed
Feb 21 14:25:35 dmt1 slapd[14121]: <= bdb_equality_candidates: (uidNumber) not indexed
Feb 21 14:25:35 dmt1 slapd[14121]: <= bdb_equality_candidates: (zarafaAccount) not indexed
Feb 21 14:25:35 dmt1 slapd[14121]: <= bdb_equality_candidates: (uidNumber) not indexed

It seems that the ldap-tree is not indexed for some fields.
I use Zentyal 2.0.15 with 64 bits.

Regards Denis