Messages

796

Installation and Upgrades / Re: Bandwidthd install in zentyal

« on: March 29, 2011, 02:44:32 am »

Check firewall-->packet filter-->internal networks to zentyal-->  (you are looking for service http) there needs to be an ACCEPT policy for http.

797

Installation and Upgrades / Re: Port Forwarding from external to internal.

« on: March 25, 2011, 11:47:58 pm »

I had a similar problem when I setup a xen server with Zentyal running in a vm.  I had port forwarding and firewall rules to allow the connection to an asterisk server on the internal network.  Everything was right but it still wouldn't work.  I finally forced zentyal to rewrite all of it's config files by restarting it (su /etc/init.d/ebox restart).  After that everything worked the way I expected it to.  Couldn't hurt to try it.

798

Installation and Upgrades / Re: Bandwidthd install in zentyal

« on: March 25, 2011, 04:44:27 am »

Look at /etc/apache2/conf.d/bandwidthd  .   Pay attention to the allow from line.  Something like 192.168.1.0/255.255.255.0  if your network was 192.168.1.0.

799

Installation and Upgrades / Re: Bandwidthd install in zentyal

« on: March 24, 2011, 04:05:02 am »

I opened a terminal and simply did "apt-get install bandwidthd"  and with not much waiting it was installed and running.  Could you describe how you went about trying to install it?

800

Installation and Upgrades / Re: Port Forwarding - Remote Desktop Service - TCP 3389

« on: March 22, 2011, 07:30:51 pm »

I beat my head off of port forwarding for hours.  Everything looked correct but it wouldn't work.  Finally I ssh'ed in and did a "sudo /etc/init.d/ebox restart" and magically it all fell into place working.  You might try that.

801

Installation and Upgrades / Re: Enabling firewall blocks web interface but not ssh

« on: March 20, 2011, 06:15:05 pm »

If you have enabled a firewall rule allowing all ports to your IP address and it is still not allowing you to access things then I would suggest restarting all ebox modules.  For some reason ebox's configs can get tied up in knots sometimes but a restart (which triggers all config files to be regenerated) fixes things.  SSH into the server and :

sudo /etc/init.d/ebox restart

this takes my system about 5 minutes to process.   I found this to be the solution in my case for port forwarding.  It wouldn't work even though it was configured correctly until I did the above and bingo all was working.

802

Spanish / Re: Dudas Firewall

« on: March 20, 2011, 05:58:21 am »

Thanks for the assist.  Muchas gracias!  What is your native language?

803

Spanish / Re: Dudas Firewall

« on: March 19, 2011, 02:59:31 am »

I am pretty sure that I know what is wrong but I am not sure that I can translate well enough to make myself clear in spanish.  Would someone help me translate the following?:

X-Lite uses plain passwords.  The asterisk setup in Zentyal uses MD5passwords by default.  Either 1) convert your password to md5 format or 2) edit the ldap settings for the extension to use secret instead of md5secret(what I chose to do).


Hope this helps ...

804

Installation and Upgrades / Re: System updates showing "Generic Linux Kernel", install or not?

« on: March 18, 2011, 03:37:44 am »

You can edit the grub.cfg and change the default=0 to default= 1 or 2 depending on whether or not there is a recovery mode entry in the second menu slot.  That should put you booting back in your old kernel so as to allow you to recover while running your server.  It sounds like there is a missing insmod lvm in the new kernel entry.

805

Spanish / Re: Dudas Firewall

« on: March 18, 2011, 03:18:46 am »

Check to see if opening TCP port 5060 helps.
Compruebe si la apertura del puerto TCP 5060 ayuda.

806

Installation and Upgrades / Log summary problems

« on: March 17, 2011, 04:39:13 am »

When I am looking at logs and choose summary, I get a strange error when I attempt to look through the details at the bottom of the page.  When I click to move on to any page past one I get an error in the frame that says :
------------------------------------------
Page not found (show help) (hide help)
we're sorry
The page cannot be found

    * If you typed the URL manually, please check it
    * Maybe a change in the Zentyal configuration or software made no longer available the requested page
    * If you need more help, you may want visit Zentyal homepage for documentation and mailing lists


---------------------------
Interestingly, the http summary page is not effected.  Any thoughts? This worked when i first installed the system.

807

Installation and Upgrades / Re: OpenVPN DHCP client list

« on: March 17, 2011, 04:32:39 am »

Since the IP address is persistent (user always gets the same IP) you can just add them to your dns manually. 

808

Installation and Upgrades / Re: How do I get a remote desktop?

« on: March 07, 2011, 06:05:15 am »

You are very welcome.  I have used X2go for a few hours now without incident.  I don't see a need to test out NX in this environment since X2go is providing the same level of service that I recall from my earlier experiences with NX.  Thanks for the tip cougarmaster!  I have it running on the Xen box as well as the Zentyal VM. 

809

Installation and Upgrades / Re: How do I get a remote desktop?

« on: March 06, 2011, 09:54:00 pm »

First blush on X2go is it passed a Microsoft level QA --- ie nothing blew up when I started it ;-).  It seems to work here.

810

Installation and Upgrades / Re: How do I get a remote desktop?

« on: March 06, 2011, 09:09:00 pm »

The full command line according to ps -ef is /usr/bin/lxsession -s LXDE -e LXDE.  Running this on my Ubuntu desktop resulted in a layover of Zentyal's desktop components over mine.  Experiment with caution.