This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
76
German / Re: upgrade 3.5 auf 4.0 failed - was nun?
« on: October 10, 2015, 12:22:10 pm »
Ergänzung: Scheisse, die boot partition kanns schon sein:
root@srv01:/# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/srv01--vg-root 113G 70G 38G 65% /
none 4,0K 0 4,0K 0% /sys/fs/cgroup
udev 7,9G 4,0K 7,9G 1% /dev
tmpfs 1,6G 952K 1,6G 1% /run
none 50M 0 50M 0% /run/lock
none 7,9G 0 7,9G 0% /run/shm
none 100M 0 100M 0% /run/user
/dev/mapper/srv01--vg-vgdata 325G 164G 145G 54% /mnt/data1
/dev/sda1 228M 221M 0 100% /boot
/dev/mapper/public_crypt 688G 42G 611G 7% /mnt/data2
boot ist zu klein ? Was tun?
root@srv01:/# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/srv01--vg-root 113G 70G 38G 65% /
none 4,0K 0 4,0K 0% /sys/fs/cgroup
udev 7,9G 4,0K 7,9G 1% /dev
tmpfs 1,6G 952K 1,6G 1% /run
none 50M 0 50M 0% /run/lock
none 7,9G 0 7,9G 0% /run/shm
none 100M 0 100M 0% /run/user
/dev/mapper/srv01--vg-vgdata 325G 164G 145G 54% /mnt/data1
/dev/sda1 228M 221M 0 100% /boot
/dev/mapper/public_crypt 688G 42G 611G 7% /mnt/data2
boot ist zu klein ? Was tun?
77
German / upgrade 3.5 auf 4.0 failed - was nun?
« on: October 10, 2015, 12:19:45 pm »Auf Zentyal 3.5 habe ich in der Weboberfläche den "Upgrade to 4.0" button angeklickt.
Ergebnis:
Statusinformationen werden eingelesen....
Die folgenden Pakete wurden automatisch installiert und werden nicht mehr benötigt:
apache2.2-bin collectd collectd-core consolekit dbconfig-common heimdal-kdc
ldap-auth-client ldap-auth-config libapache2-mod-ldap-userdir libbind9-80
libclass-isa-perl libconfig++8 libconfig8 libdbi1 libdbus-glib-1-2 libdm0
libdns81 libgd2-noxpm libicu48 libisc83 libisccc80 libisccfg82 liblua5.1-0
liblwres80 libmath-round-perl libmcrypt4 libnss-ldap
libpackage-deprecationmanager-perl libpam-heimdal libpam-ldap libpango1.0-0
librrd4 librrds-perl libslp1 libswitch-perl libtommath0
linux-headers-3.8.0-34 linux-headers-3.8.0-34-generic openbsd-inetd php-auth
php-mail-mime php-mail-mimedecode php-net-smtp php-net-socket php5-intl
php5-ldap php5-mcrypt php5-mysqlnd python-apport python-gi
python-gnupginterface python-httplib2 python-keyring python-launchpadlib
python-lazr.restfulclient python-lazr.uri python-oauth python-problem-report
python-wadllib python-zope.interface roundcube roundcube-core
roundcube-mysql roundcube-plugins rrdtool samba4 slapd slapd-smbk5pwd
sshpass tinymce ttf-dejavu-core update-manager-core vsftpd zbwmonitor
Verwenden Sie »apt-get autoremove«, um sie zu entfernen.
0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
3 nicht vollständig installiert oder entfernt.
Nach dieser Operation werden 0 B Plattenplatz zusätzlich benutzt.
linux-image-extra-3.13.0-65-generic (3.13.0-65.106) wird eingerichtet ...
run-parts: executing /etc/kernel/postinst.d/apt-auto-removal 3.13.0-65-generic /boot/vmlinuz-3.13.0-65-generic
run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.13.0-65-generic /boot/vmlinuz-3.13.0-65-generic
update-initramfs: Generating /boot/initrd.img-3.13.0-65-generic
gzip: stdout: No space left on device
E: mkinitramfs failure cpio 141 gzip 1
update-initramfs: failed for /boot/initrd.img-3.13.0-65-generic with 1.
run-parts: /etc/kernel/postinst.d/initramfs-tools exited with return code 1
dpkg: Fehler beim Bearbeiten des Paketes linux-image-extra-3.13.0-65-generic (--configure):
Unterprozess installiertes post-installation-Skript gab den Fehlerwert 1 zurück
dpkg: Abhängigkeitsprobleme verhindern Konfiguration von linux-image-generic:
linux-image-generic hängt ab von linux-image-extra-3.13.0-65-generic; aber:
Paket linux-image-extra-3.13.0-65-generic ist noch nicht konfiguriert.
dpkg: Fehler beim Bearbeiten des Paketes linux-image-generic (--configure):
Abhängigkeitsprobleme - verbleibt unkonfiguriert
dpkg: Abhängigkeitsprobleme verhindern Konfiguration von linux-generic:
linux-generic hängt ab von linux-image-generic (= 3.13.0.65.71); aber:
Paket linux-image-generic ist noch nicht konfiguriert.
dpkg: Fehler beim Bearbeiten des Paketes linux-generic (--configure):
Abhängigkeitsprobleme - verbleibt unkonfiguriert
Es wurde kein Apport-Bericht verfasst, da die Fehlermeldung darauf hindeutet, dass dies lediglich ein Folgefehler eines vorherigen Problems ist.
Es wurde kein Apport-Bericht verfasst, da die Fehlermeldung darauf hindeutet, dass dies lediglich ein Folgefehler eines vorherigen Problems ist.
Fehler traten auf beim Bearbeiten von:
linux-image-extra-3.13.0-65-generic
linux-image-generic
linux-generic
E: Sub-process /usr/bin/dpkg returned an error code (1)
2015/10/10 12:11:12 Zentyal upgrade failed. Full log at /var/log/zentyal/upgrade.log.
Auf der root platte sind noch 38GB frei. Daran kanns wohl nicht liegen..... ?
Bitte um Tips....
78
Installation and Upgrades / Re: what is the latest mail and user corner update doing?
« on: August 14, 2014, 05:10:30 pm »
YES! Frustrated much! Because I don't want to see anything removed by just pressing "Update!"
Especially not any functionality that I deem essential. Fetch external mail, FOR EXAMPLE.
And your answer shows that you are part of the problem, not of the solution.
Especially not any functionality that I deem essential. Fetch external mail, FOR EXAMPLE.
And your answer shows that you are part of the problem, not of the solution.
79
Installation and Upgrades / Re: what is the latest mail and user corner update doing?
« on: August 11, 2014, 09:41:41 am »
GEEZus. I know what I am writing! I have 3.5.2 and I want to know what will happen if I press "UPDATE"!
TELL ME!
TELL ME!
80
Installation and Upgrades / what is the latest mail and user corner update doing?
« on: August 10, 2014, 12:37:27 pm »
Hi,
I updated everything to Zentyal 3.5.2 recently, which was a bit of a hassle, a few days ago, and now two more modules are recommended to being updated: Mail module and user corner.
But I don't know exactly what the update is going to do, and I fear troubles.
So I won't do the update until I know what will happen - will anything be removed, etc.?
Please, let me know what the update is doing.
I updated everything to Zentyal 3.5.2 recently, which was a bit of a hassle, a few days ago, and now two more modules are recommended to being updated: Mail module and user corner.
But I don't know exactly what the update is going to do, and I fear troubles.
So I won't do the update until I know what will happen - will anything be removed, etc.?
Please, let me know what the update is doing.
81
German / Re: Zentyal 3.4 zu 3.5 Update Button - irgendjemand Probleme?
« on: August 06, 2014, 12:35:04 pm »
Teilweise gelöst - a) antivir und antispam disable
b) /usr/share/zentyal-software/auto-updater händisch gestartet
c) /usr/share/zentyal-mail/fetchmail-update händisch gestartet
d) **** postsuper -r ALL ----> alle mails wurden nun zugestellt, die sonst in der queue verschimmelten ! (249 - wegen crontab alle 5 min errors)
e) **** postqueue -f ----> ebenso
Mehr fehler :
Subject: Anacron job 'cron.daily' on srv01
/etc/cron.daily/amavisd-new:
Please run this cronjob as user amavis
run-parts: /etc/cron.daily/amavisd-new exited with return code 1
/etc/cron.daily/logrotate:
error: error running shared postrotate script for '/var/log/nginx/*.log '
run-parts: /etc/cron.daily/logrotate exited with return code 1
Noch mehr Fehler laut mail to root:
Subject: Cron <root@srv01> /usr/share/zentyal-users/slave-sync
defined(@array) is deprecated at /usr/share/perl5/Log/Log4perl/Config.pm line 864.
(Maybe you should just omit the defined()?)
Perl API version v5.14.0 of 1 does not match v5.18.0 at /usr/lib/perl/5.18/DynaLoader.pm line 207.
Compilation failed in require at /usr/share/perl5/EBox/Sudo.pm line 25.
BEGIN failed--compilation aborted at /usr/share/perl5/EBox/Sudo.pm line 25.
Compilation failed in require at /usr/share/perl5/EBox/Module/Base.pm line 28.
BEGIN failed--compilation aborted at /usr/share/perl5/EBox/Module/Base.pm line 28.
Compilation failed in require at (eval 19) line 2.
...propagated at /usr/share/perl/5.18/base.pm line 83.
BEGIN failed--compilation aborted at /usr/share/perl5/EBox/Module/Config.pm line 20.
Compilation failed in require at (eval 18) line 2.
...propagated at /usr/share/perl/5.18/base.pm line 83.
BEGIN failed--compilation aborted at /usr/share/perl5/EBox/GlobalImpl.pm line 21.
Compilation failed in require at /usr/share/perl5/EBox/Global.pm line 22.
BEGIN failed--compilation aborted at /usr/share/perl5/EBox/Global.pm line 22.
Compilation failed in require at /usr/share/zentyal-users/slave-sync line 27.
BEGIN failed--compilation aborted at /usr/share/zentyal-users/slave-sync line 27.
TSubject: Cron <root@srv01> /usr/share/zentyal-users/slave-sync
defined(@array) is deprecated at /usr/share/perl5/Log/Log4perl/Config.pm line 864.
(Maybe you should just omit the defined()?)
Perl API version v5.14.0 of 1 does not match v5.18.0 at /usr/lib/perl/5.18/DynaLoader.pm line 207.
Compilation failed in require at /usr/share/perl5/EBox/Sudo.pm line 25.
BEGIN failed--compilation aborted at /usr/share/perl5/EBox/Sudo.pm line 25.
Compilation failed in require at /usr/share/perl5/EBox/Module/Base.pm line 28.
BEGIN failed--compilation aborted at /usr/share/perl5/EBox/Module/Base.pm line 28.
Compilation failed in require at (eval 19) line 2.
...propagated at /usr/share/perl/5.18/base.pm line 83.
BEGIN failed--compilation aborted at /usr/share/perl5/EBox/Module/Config.pm line 20.
Compilation failed in require at (eval 18) line 2.
...propagated at /usr/share/perl/5.18/base.pm line 83.
BEGIN failed--compilation aborted at /usr/share/perl5/EBox/GlobalImpl.pm line 21.
Compilation failed in require at /usr/share/perl5/EBox/Global.pm line 22.
BEGIN failed--compilation aborted at /usr/share/perl5/EBox/Global.pm line 22.
Compilation failed in require at /usr/share/zentyal-users/slave-sync line 27.
BEGIN failed--compilation aborted at /usr/share/zentyal-users/slave-sync line 27.
Temporäre Behebung : /etc/cron.d/zentyal-users entfernen /woandershin kopieren
b) /usr/share/zentyal-software/auto-updater händisch gestartet
c) /usr/share/zentyal-mail/fetchmail-update händisch gestartet
d) **** postsuper -r ALL ----> alle mails wurden nun zugestellt, die sonst in der queue verschimmelten ! (249 - wegen crontab alle 5 min errors)
e) **** postqueue -f ----> ebenso
Mehr fehler :
Subject: Anacron job 'cron.daily' on srv01
/etc/cron.daily/amavisd-new:
Please run this cronjob as user amavis
run-parts: /etc/cron.daily/amavisd-new exited with return code 1
/etc/cron.daily/logrotate:
error: error running shared postrotate script for '/var/log/nginx/*.log '
run-parts: /etc/cron.daily/logrotate exited with return code 1
Noch mehr Fehler laut mail to root:
Subject: Cron <root@srv01> /usr/share/zentyal-users/slave-sync
defined(@array) is deprecated at /usr/share/perl5/Log/Log4perl/Config.pm line 864.
(Maybe you should just omit the defined()?)
Perl API version v5.14.0 of 1 does not match v5.18.0 at /usr/lib/perl/5.18/DynaLoader.pm line 207.
Compilation failed in require at /usr/share/perl5/EBox/Sudo.pm line 25.
BEGIN failed--compilation aborted at /usr/share/perl5/EBox/Sudo.pm line 25.
Compilation failed in require at /usr/share/perl5/EBox/Module/Base.pm line 28.
BEGIN failed--compilation aborted at /usr/share/perl5/EBox/Module/Base.pm line 28.
Compilation failed in require at (eval 19) line 2.
...propagated at /usr/share/perl/5.18/base.pm line 83.
BEGIN failed--compilation aborted at /usr/share/perl5/EBox/Module/Config.pm line 20.
Compilation failed in require at (eval 18) line 2.
...propagated at /usr/share/perl/5.18/base.pm line 83.
BEGIN failed--compilation aborted at /usr/share/perl5/EBox/GlobalImpl.pm line 21.
Compilation failed in require at /usr/share/perl5/EBox/Global.pm line 22.
BEGIN failed--compilation aborted at /usr/share/perl5/EBox/Global.pm line 22.
Compilation failed in require at /usr/share/zentyal-users/slave-sync line 27.
BEGIN failed--compilation aborted at /usr/share/zentyal-users/slave-sync line 27.
TSubject: Cron <root@srv01> /usr/share/zentyal-users/slave-sync
defined(@array) is deprecated at /usr/share/perl5/Log/Log4perl/Config.pm line 864.
(Maybe you should just omit the defined()?)
Perl API version v5.14.0 of 1 does not match v5.18.0 at /usr/lib/perl/5.18/DynaLoader.pm line 207.
Compilation failed in require at /usr/share/perl5/EBox/Sudo.pm line 25.
BEGIN failed--compilation aborted at /usr/share/perl5/EBox/Sudo.pm line 25.
Compilation failed in require at /usr/share/perl5/EBox/Module/Base.pm line 28.
BEGIN failed--compilation aborted at /usr/share/perl5/EBox/Module/Base.pm line 28.
Compilation failed in require at (eval 19) line 2.
...propagated at /usr/share/perl/5.18/base.pm line 83.
BEGIN failed--compilation aborted at /usr/share/perl5/EBox/Module/Config.pm line 20.
Compilation failed in require at (eval 18) line 2.
...propagated at /usr/share/perl/5.18/base.pm line 83.
BEGIN failed--compilation aborted at /usr/share/perl5/EBox/GlobalImpl.pm line 21.
Compilation failed in require at /usr/share/perl5/EBox/Global.pm line 22.
BEGIN failed--compilation aborted at /usr/share/perl5/EBox/Global.pm line 22.
Compilation failed in require at /usr/share/zentyal-users/slave-sync line 27.
BEGIN failed--compilation aborted at /usr/share/zentyal-users/slave-sync line 27.
Temporäre Behebung : /etc/cron.d/zentyal-users entfernen /woandershin kopieren
82
German / Re: gelöst: fetchmail
« on: August 06, 2014, 10:23:53 am »
Hilfeeee ich brauch UNBEDINGT ein funktionierendes "fetch external mails" !
Ich krieg immer "connection to port 10024 refused" in den Logs. Bitte hiiilfeeeeeeeeeeeeeeeeeee!
Ich krieg immer "connection to port 10024 refused" in den Logs. Bitte hiiilfeeeeeeeeeeeeeeeeeee!
83
German / Re: Zentyal 3.4 zu 3.5 Update Button - irgendjemand Probleme?
« on: August 06, 2014, 07:55:53 am »
Hiiiiiiiiiiiiiiiiiilfeeeee, die externen Mails für die einzelnen User abholen ("fetchmail") geht nicht mehr!!!
"Connect to port 10024 refused error" erscheint in allen Mail Logfiles. Ja, wir hatten schon vorher keinen Spamfilter/Virenscanner, aber vorher klappte das.
"Connect to port 10024 refused error" erscheint in allen Mail Logfiles. Ja, wir hatten schon vorher keinen Spamfilter/Virenscanner, aber vorher klappte das.
84
Installation and Upgrades / Re: Zentyal upgrade 3.3 -> 3.5 - external mail fetching gone? crontab errors? fix?
« on: August 05, 2014, 09:21:26 pm »
another problem:
Aug 5 21:15:01 srv01 postfix/error[23851]: 4238F280261: to=<root@mail.xxxxx.com>, orig_to=<root>, relay=none, delay=0.05, delays=0.05/0/0/0, dsn=4.4.1, status=deferred (delivery temporarily suspended: connect to 127.0.0.1[127.0.0.1]:10024: Connection refused)
After the update to Zentyal 3.5, the mail system obviously wants a spam filter, but none was ever running on our systems, and trying to start it did not work - there is no Spamassasin, etc. running on port 10024........ thus, mail will not be delivered to the local accounts.
Any advice appreciated.
Aug 5 21:15:01 srv01 postfix/error[23851]: 4238F280261: to=<root@mail.xxxxx.com>, orig_to=<root>, relay=none, delay=0.05, delays=0.05/0/0/0, dsn=4.4.1, status=deferred (delivery temporarily suspended: connect to 127.0.0.1[127.0.0.1]:10024: Connection refused)
After the update to Zentyal 3.5, the mail system obviously wants a spam filter, but none was ever running on our systems, and trying to start it did not work - there is no Spamassasin, etc. running on port 10024........ thus, mail will not be delivered to the local accounts.
Any advice appreciated.
85
Installation and Upgrades / Re: Zentyal upgrade 3.3 -> 3.5 - external mail fetching gone? crontab errors? fix?
« on: August 05, 2014, 07:11:28 pm »
More errors - while updating:
Einige Module meldeten ein Fehler beim Sichern der Änderungen. Weitere Informationen finden Sie in den Logs in /var/log/zentyal/
The following modules failed while saving their changes, their state is unknown: mailfilter The following modules failed while saving their changes, their state is unknown: mailfilter at The following modules failed while saving their changes, their state is unknown: mailfilter at /usr/share/perl5/EBox/GlobalImpl.pm line 735 EBox::GlobalImpl::saveAllModules('EBox::GlobalImpl=HASH(0x3ac7578)', 'progress', 'EBox::ProgressIndicator=HASH(0x14e78f0)') called at /usr/share/perl5/EBox/Global.pm line 95 EBox::Global::AUTOLOAD('EBox::Global=HASH(0x3af0318)', 'progress', 'EBox::ProgressIndicator=HASH(0x14e78f0)') called at /usr/share/zentyal/global-action line 32 eval {...} at /usr/share/zentyal/global-action line 30
Einige Module meldeten ein Fehler beim Sichern der Änderungen. Weitere Informationen finden Sie in den Logs in /var/log/zentyal/
The following modules failed while saving their changes, their state is unknown: mailfilter The following modules failed while saving their changes, their state is unknown: mailfilter at The following modules failed while saving their changes, their state is unknown: mailfilter at /usr/share/perl5/EBox/GlobalImpl.pm line 735 EBox::GlobalImpl::saveAllModules('EBox::GlobalImpl=HASH(0x3ac7578)', 'progress', 'EBox::ProgressIndicator=HASH(0x14e78f0)') called at /usr/share/perl5/EBox/Global.pm line 95 EBox::Global::AUTOLOAD('EBox::Global=HASH(0x3af0318)', 'progress', 'EBox::ProgressIndicator=HASH(0x14e78f0)') called at /usr/share/zentyal/global-action line 32 eval {...} at /usr/share/zentyal/global-action line 30
86
Installation and Upgrades / Zentyal upgrade 3.3 -> 3.5 - external mail fetching gone? crontab errors? fix?
« on: August 05, 2014, 06:09:59 pm »
Hi,
I upgraded from Zentyal 3.3 to 3.4 and immidely to 3.5.2 today; now, Zentyal does not fetch external mails, which is totally essential to me.
I noticed that I got some mails with errors:
Date: Tue, 5 Aug 2014 16:00:01 +0200 (CEST)
From: Cron Daemon <root@mail.ic.com>
To: root@mail.ic.com
Subject: Cron <root@srv01> /usr/share/zentyal-users/slave-sync
defined(@array) is deprecated at /usr/share/perl5/Log/Log4perl/Config.pm line 864.
(Maybe you should just omit the defined()?)
Perl API version v5.14.0 of 1 does not match v5.18.0 at /usr/lib/perl/5.18/DynaLoader.pm line 207.
Compilation failed in require at /usr/share/perl5/EBox/Sudo.pm line 25.
BEGIN failed--compilation aborted at /usr/share/perl5/EBox/Sudo.pm line 25.
Compilation failed in require at /usr/share/perl5/EBox/Module/Base.pm line 28.
BEGIN failed--compilation aborted at /usr/share/perl5/EBox/Module/Base.pm line 28.
Compilation failed in require at (eval 19) line 2.
...propagated at /usr/share/perl/5.18/base.pm line 83.
BEGIN failed--compilation aborted at /usr/share/perl5/EBox/Module/Config.pm line 20.
Compilation failed in require at (eval 18) line 2.
...propagated at /usr/share/perl/5.18/base.pm line 83.
BEGIN failed--compilation aborted at /usr/share/perl5/EBox/GlobalImpl.pm line 21.
Compilation failed in require at /usr/share/perl5/EBox/Global.pm line 22.
BEGIN failed--compilation aborted at /usr/share/perl5/EBox/Global.pm line 22.
Compilation failed in require at /usr/share/zentyal-users/slave-sync line 27.
BEGIN failed--compilation aborted at /usr/share/zentyal-users/slave-sync line 27.
----------next mail:
Date: Tue, 5 Aug 2014 16:01:02 +0200 (CEST)
From: Cron Daemon <root@mail.ic.com>
To: root@mail.ic.com
Subject: Cron <root@srv01> [ -x /usr/share/zentyal-mail/fetchmail-update ] && /usr/share/zentyal-mail/fetchmail-update
Can't call method "isEnabled" on an undefined value at /usr/share/zentyal-mail/fetchmail-update line 16, <GEN0> line 1
---------next
Date: Tue, 5 Aug 2014 16:05:01 +0200 (CEST)
From: Cron Daemon <root@mail.ic.com>
To: root@mail.ic.com
Subject: Cron <root@srv01> /usr/share/zentyal-users/slave-sync
/bin/sh: 1: /usr/share/zentyal-users/slave-sync: not found
------------- End of mail
So what to do to get fetching of external mail to work again?
I upgraded from Zentyal 3.3 to 3.4 and immidely to 3.5.2 today; now, Zentyal does not fetch external mails, which is totally essential to me.
I noticed that I got some mails with errors:
Date: Tue, 5 Aug 2014 16:00:01 +0200 (CEST)
From: Cron Daemon <root@mail.ic.com>
To: root@mail.ic.com
Subject: Cron <root@srv01> /usr/share/zentyal-users/slave-sync
defined(@array) is deprecated at /usr/share/perl5/Log/Log4perl/Config.pm line 864.
(Maybe you should just omit the defined()?)
Perl API version v5.14.0 of 1 does not match v5.18.0 at /usr/lib/perl/5.18/DynaLoader.pm line 207.
Compilation failed in require at /usr/share/perl5/EBox/Sudo.pm line 25.
BEGIN failed--compilation aborted at /usr/share/perl5/EBox/Sudo.pm line 25.
Compilation failed in require at /usr/share/perl5/EBox/Module/Base.pm line 28.
BEGIN failed--compilation aborted at /usr/share/perl5/EBox/Module/Base.pm line 28.
Compilation failed in require at (eval 19) line 2.
...propagated at /usr/share/perl/5.18/base.pm line 83.
BEGIN failed--compilation aborted at /usr/share/perl5/EBox/Module/Config.pm line 20.
Compilation failed in require at (eval 18) line 2.
...propagated at /usr/share/perl/5.18/base.pm line 83.
BEGIN failed--compilation aborted at /usr/share/perl5/EBox/GlobalImpl.pm line 21.
Compilation failed in require at /usr/share/perl5/EBox/Global.pm line 22.
BEGIN failed--compilation aborted at /usr/share/perl5/EBox/Global.pm line 22.
Compilation failed in require at /usr/share/zentyal-users/slave-sync line 27.
BEGIN failed--compilation aborted at /usr/share/zentyal-users/slave-sync line 27.
----------next mail:
Date: Tue, 5 Aug 2014 16:01:02 +0200 (CEST)
From: Cron Daemon <root@mail.ic.com>
To: root@mail.ic.com
Subject: Cron <root@srv01> [ -x /usr/share/zentyal-mail/fetchmail-update ] && /usr/share/zentyal-mail/fetchmail-update
Can't call method "isEnabled" on an undefined value at /usr/share/zentyal-mail/fetchmail-update line 16, <GEN0> line 1
---------next
Date: Tue, 5 Aug 2014 16:05:01 +0200 (CEST)
From: Cron Daemon <root@mail.ic.com>
To: root@mail.ic.com
Subject: Cron <root@srv01> /usr/share/zentyal-users/slave-sync
/bin/sh: 1: /usr/share/zentyal-users/slave-sync: not found
------------- End of mail
So what to do to get fetching of external mail to work again?
87
German / email password nicht geändert?
« on: May 30, 2014, 03:37:40 pm »
Folgende Konfiguration:
* Jeder User hat einen lokalen Account: user1, user2, user@lokaldomain.lan
* Kerberos/Samba rennt
* Eine lokale Domäne lokaldomain.lan existiert
Wir melden uns auf der lokalen Domäne am Win-Client per Kerberos an, erstellen ein Thunderbird-Konto, folgendermaßen:
* user1@lokaldomain.lan
---> der User1 holt externe mails von GMX.DE ab
---> landen am lokalen Zentyal-Server, welcher sie abholt
---> zum *ANTWORTEN* existiert im Thunderbird eine Zweitidentität : "userX@externe-domain.COM" der wird nur zum VERSENDEN verwendet, ist aber die Standardidentität des users "userX@lokaledomain.LAN" !
Empfangen tut also der lokale ".lan" Benutzer, ANTWORTEN tut dessen Zweitidentität und GESPEICHERT wird das gesendete auf der Kerberos-Domäne dank servergespeicherte Profile.
Das funktioniert soweit, so gut.
Jetzt hat aber der lokale Kerberos-Benutzer "user1" sein password von "xxxxxxxxxxxxxxx" auf "yyyyyyyyyyyyyyy" geändert.
Folge: Mozilla Thunderbird regt sich auf, daß er keine Verbindung zum Zentyal bekommt.
Also: Test : "Alle gespeicherten Passwörter löschen" ---> es stellt sich heraus, daß zum Abholen der Mails noch immer das alte Kerberos-Password "xxxxxxxxxx" notwendig ist.
Was nun?
Wie kriege ich Zentyal dazu, das neue Password zum Mail-Abholen zu verwenden?
* Jeder User hat einen lokalen Account: user1, user2, user@lokaldomain.lan
* Kerberos/Samba rennt
* Eine lokale Domäne lokaldomain.lan existiert
Wir melden uns auf der lokalen Domäne am Win-Client per Kerberos an, erstellen ein Thunderbird-Konto, folgendermaßen:
* user1@lokaldomain.lan
---> der User1 holt externe mails von GMX.DE ab
---> landen am lokalen Zentyal-Server, welcher sie abholt
---> zum *ANTWORTEN* existiert im Thunderbird eine Zweitidentität : "userX@externe-domain.COM" der wird nur zum VERSENDEN verwendet, ist aber die Standardidentität des users "userX@lokaledomain.LAN" !
Empfangen tut also der lokale ".lan" Benutzer, ANTWORTEN tut dessen Zweitidentität und GESPEICHERT wird das gesendete auf der Kerberos-Domäne dank servergespeicherte Profile.
Das funktioniert soweit, so gut.
Jetzt hat aber der lokale Kerberos-Benutzer "user1" sein password von "xxxxxxxxxxxxxxx" auf "yyyyyyyyyyyyyyy" geändert.
Folge: Mozilla Thunderbird regt sich auf, daß er keine Verbindung zum Zentyal bekommt.
Also: Test : "Alle gespeicherten Passwörter löschen" ---> es stellt sich heraus, daß zum Abholen der Mails noch immer das alte Kerberos-Password "xxxxxxxxxx" notwendig ist.
Was nun?
Wie kriege ich Zentyal dazu, das neue Password zum Mail-Abholen zu verwenden?
88
Installation and Upgrades / Re: Backup system does not backup mounted other drive
« on: March 01, 2014, 10:55:30 pm »
Too complex.
I just read the manual of "duplicity", I found out the command-line usage for "duplicity" is easy, so I am doing an automated data backup due to user root's crontab.
The other option would have been to elevate the rights of the "backup" group, but I didn't want to break anything.
I just read the manual of "duplicity", I found out the command-line usage for "duplicity" is easy, so I am doing an automated data backup due to user root's crontab.
The other option would have been to elevate the rights of the "backup" group, but I didn't want to break anything.
89
Installation and Upgrades / Backup system does not backup mounted other drive
« on: February 20, 2014, 07:00:01 pm »
Hello,
I have mounted some drive (/dev/sdc1) at /mnt/data1.
I want Zentyal to include this directory, /mnt/data1, for backupping.
Unfortunately, I saw that the backup system only backs up files from anything else but from extra mounted drives.
Is there anything that I can do about it ?
I have mounted some drive (/dev/sdc1) at /mnt/data1.
I want Zentyal to include this directory, /mnt/data1, for backupping.
Unfortunately, I saw that the backup system only backs up files from anything else but from extra mounted drives.
Is there anything that I can do about it ?
90
German / Re: email gehen entweder nach aussen oder nach innen aber nicht beides
« on: February 20, 2014, 05:02:27 pm »
Meine häßiche Umgehungslösung sieht so aus:
* Jeder User hat einen lokalen Account: user1, user2, user@lokaldomain.lan
* Kerberos/Samba rennt
* Eine lokale Domäne lokaldomain.lan existiert
Wir melden uns auf der lokalen Domäne am Win-Client per Kerberos an, erstellen ein Thunderbird-Konto, folgendermaßen:
* user1@lokaldomain.lan
---> der User1 holt externe mails von GMX.DE ab
---> landen am lokalen Zentyal-Server, welcher sie abholt
---> zum *ANTWORTEN* existiert im Thunderbird eine Zweitidentität : "userX@externe-domain.COM" der wird nur zum VERSENDEN verwendet, ist aber die Standardidentität des users "userX@lokaledomain.LAN" !
Empfangen tut also der lokale ".lan" Benutzer, ANTWORTEN tut dessen Zweitidentität und GESPEICHERT wird das gesendete auf der Kerberos-Domäne dank servergespeicherte Profile!
Kopfweh? JA ICH AUCH! Aber der häßliche Hack KLAPPT!
* Jeder User hat einen lokalen Account: user1, user2, user@lokaldomain.lan
* Kerberos/Samba rennt
* Eine lokale Domäne lokaldomain.lan existiert
Wir melden uns auf der lokalen Domäne am Win-Client per Kerberos an, erstellen ein Thunderbird-Konto, folgendermaßen:
* user1@lokaldomain.lan
---> der User1 holt externe mails von GMX.DE ab
---> landen am lokalen Zentyal-Server, welcher sie abholt
---> zum *ANTWORTEN* existiert im Thunderbird eine Zweitidentität : "userX@externe-domain.COM" der wird nur zum VERSENDEN verwendet, ist aber die Standardidentität des users "userX@lokaledomain.LAN" !
Empfangen tut also der lokale ".lan" Benutzer, ANTWORTEN tut dessen Zweitidentität und GESPEICHERT wird das gesendete auf der Kerberos-Domäne dank servergespeicherte Profile!
Kopfweh? JA ICH AUCH! Aber der häßliche Hack KLAPPT!