Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
106
Installation and Upgrades / Re: cannot send mail from internal network to internet
« on: February 12, 2014, 02:24:17 pm »
roswitina: I have done this long ago - you don't seem to be able to face my problem.
We need more than ONE smarthost and ONE smarthost user for sending mail !
We need Smarthost auth for EACH user who fetches his external mail from an external account - he should also SEND his mail over this external account!
We need more than ONE smarthost and ONE smarthost user for sending mail !
We need Smarthost auth for EACH user who fetches his external mail from an external account - he should also SEND his mail over this external account!
107
Installation and Upgrades / Re: cannot send mail from internal network to internet
« on: February 12, 2014, 12:50:38 pm »
Also I always get errors sending mail:
This is the mail system at host srv01.mydomain-something.lan.
I'm sorry to have to inform you that your message could not
be delivered to one or more recipients. It's attached below.
For further assistance, please send mail to postmaster.
If you do so, please include this problem report. You can
delete your own text from the attached returned message.
The mail system
<someuser@gmx.net>: host mail.external-domain.com[81.12.13.31] said: 550-Invalid
authentication (you can only send from @external-domain.com or its 550 aliases)
(in reply to RCPT TO command)
Reporting-MTA: dns; srv01.mydomain-something.lan
X-Postfix-Queue-ID: E09B8281A4D
X-Postfix-Sender: rfc822; att@mydomain-something.lan
Arrival-Date: Wed, 12 Feb 2014 12:44:29 +0100 (CET)
Final-Recipient: rfc822; user@gmx.net
Original-Recipient: rfc822;user@gmx.net
Action: failed
Status: 5.0.0
Remote-MTA: dns; mail.external-domain.com
Diagnostic-Code: smtp; 550-Invalid authentication (you can only send from
@external-domain.com or its 550 aliases)
----------------------------------
What now? I simply cannot send mail.... any advice appreciated!
This is the mail system at host srv01.mydomain-something.lan.
I'm sorry to have to inform you that your message could not
be delivered to one or more recipients. It's attached below.
For further assistance, please send mail to postmaster.
If you do so, please include this problem report. You can
delete your own text from the attached returned message.
The mail system
<someuser@gmx.net>: host mail.external-domain.com[81.12.13.31] said: 550-Invalid
authentication (you can only send from @external-domain.com or its 550 aliases)
(in reply to RCPT TO command)
Reporting-MTA: dns; srv01.mydomain-something.lan
X-Postfix-Queue-ID: E09B8281A4D
X-Postfix-Sender: rfc822; att@mydomain-something.lan
Arrival-Date: Wed, 12 Feb 2014 12:44:29 +0100 (CET)
Final-Recipient: rfc822; user@gmx.net
Original-Recipient: rfc822;user@gmx.net
Action: failed
Status: 5.0.0
Remote-MTA: dns; mail.external-domain.com
Diagnostic-Code: smtp; 550-Invalid authentication (you can only send from
@external-domain.com or its 550 aliases)
----------------------------------
What now? I simply cannot send mail.... any advice appreciated!
108
Installation and Upgrades / Re: cannot send mail from internal network to internet
« on: February 12, 2014, 11:50:04 am »
Aaah I just found out, I can send mail if I use :
Smarthost auth
BUT!
I need a smarthost auth for EACH local user - not just ONE GENERAL smarthost auth.....
You understand my problem?
I need a different smarthost auth for each local user1, user2, user3... who has the option to fetch external mail from external account1, account2, account3 .....
How do I do that, when I only have the option to use ONE GENERAL user to send external mail via smarthost auth ?
Smarthost auth
BUT!
I need a smarthost auth for EACH local user - not just ONE GENERAL smarthost auth.....
You understand my problem?
I need a different smarthost auth for each local user1, user2, user3... who has the option to fetch external mail from external account1, account2, account3 .....
How do I do that, when I only have the option to use ONE GENERAL user to send external mail via smarthost auth ?
109
Installation and Upgrades / cannot send mail from internal network to internet
« on: February 12, 2014, 11:43:47 am »
Hello,
Finally, Zentyal fetches my mail from external accounts and puts it to some internal account. Hooray!
But, answering these mails, something goes wrong when sending these mails.
Here is the error log:
21822281A4E 1559 Wed Feb 12 11:28:16 user@myzentyaldomain.lan aloh@some-maill.net host mail.some-mail.net[65.0.1.2] said: 450 4.7.1 Client host rejected: cannot find your hostname, [myip1.2.35.23] (in reply to RCPT TO command)
424EA281A31 1043 Tue Feb 11 18:45:01 user@myzentyaldomain.lan TO-USER@gmx.net host mx00.gmx.net[213.165.67.99] refused to talk to me: 554-gmx.net (mxgmx004) Nemesis ESMTP Service not available 554-No SMTP service 554 invalid DNS PTR resource record
Any advice of what to do to get rid of these errors and send some mail ?
Finally, Zentyal fetches my mail from external accounts and puts it to some internal account. Hooray!
But, answering these mails, something goes wrong when sending these mails.
Here is the error log:
21822281A4E 1559 Wed Feb 12 11:28:16 user@myzentyaldomain.lan aloh@some-maill.net host mail.some-mail.net[65.0.1.2] said: 450 4.7.1 Client host rejected: cannot find your hostname, [myip1.2.35.23] (in reply to RCPT TO command)
424EA281A31 1043 Tue Feb 11 18:45:01 user@myzentyaldomain.lan TO-USER@gmx.net host mx00.gmx.net[213.165.67.99] refused to talk to me: 554-gmx.net (mxgmx004) Nemesis ESMTP Service not available 554-No SMTP service 554 invalid DNS PTR resource record
Any advice of what to do to get rid of these errors and send some mail ?
110
Installation and Upgrades / [SOLVED] howto edit bootloader config so as to get cmd-prompt of harddisk pwd?
« on: February 11, 2014, 04:36:40 pm »
Hello,
Finally, I reinstalled Zentyal 3.3 to a server board (Microsystem, Dual Xeon, .... LSI Megaraid Raid system).
I was selecting "encrypt partition with password" since it contains sensitive information.
However, that was also the problem, because the boot loader switches to Graphics mode (VGA) and thus I cannot read the prompt where I could enter the harddisk password.
Thus, my option is heretofore to edit the boot commands in the GRUB boot editor:
menuentry 'Ubuntu, with Linux 3.8.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
* gfxmode $linux_gfx_mode ----------> I removed this line
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 6190180d-bb5c-4859-8e58-7a7a23fb4d32
* linux /vmlinuz-3.8.0-29-generic root=/dev/mapper/srv01--vg-root ro quiet splash $vt_handoff
initrd /initrd.img-3.8.0-29-generic
Also I removed the option "quiet splash" from the "linux /vmlinuz...." line.
I guess it is very un-elegant to manually edit the boot menu each time you reboot the server.
Thus: Which options do I have to edit the boot menu? The file "boot/grub/grub.cfg" clearly stated: "DO NOT EDIT THIS FILE", so I will not; I'll rather have the server running at the mo.
Please let me know how to properly edit the grub boot menu in Zentyal.
Finally, I reinstalled Zentyal 3.3 to a server board (Microsystem, Dual Xeon, .... LSI Megaraid Raid system).
I was selecting "encrypt partition with password" since it contains sensitive information.
However, that was also the problem, because the boot loader switches to Graphics mode (VGA) and thus I cannot read the prompt where I could enter the harddisk password.
Thus, my option is heretofore to edit the boot commands in the GRUB boot editor:
menuentry 'Ubuntu, with Linux 3.8.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
* gfxmode $linux_gfx_mode ----------> I removed this line
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 6190180d-bb5c-4859-8e58-7a7a23fb4d32
* linux /vmlinuz-3.8.0-29-generic root=/dev/mapper/srv01--vg-root ro quiet splash $vt_handoff
initrd /initrd.img-3.8.0-29-generic
Also I removed the option "quiet splash" from the "linux /vmlinuz...." line.
I guess it is very un-elegant to manually edit the boot menu each time you reboot the server.
Thus: Which options do I have to edit the boot menu? The file "boot/grub/grub.cfg" clearly stated: "DO NOT EDIT THIS FILE", so I will not; I'll rather have the server running at the mo.
Please let me know how to properly edit the grub boot menu in Zentyal.
111
Installation and Upgrades / Re: Heeeelp me all mails are vanishing and I dont know what to do now
« on: February 10, 2014, 09:42:36 pm »
Sorry, I just checked, I disabled Zarafa everywhere. No single Zarafa option is set.
So, what to do?
So, what to do?
112
Installation and Upgrades / Re: Heeeelp me all mails are vanishing and I dont know what to do now
« on: February 10, 2014, 09:38:36 pm »
OK I admit I won't be really NEEDING Zarafa. Any suggestions of what to do to just get the Webmail to run ?
113
Installation and Upgrades / undefined symbol in logfile , unable to load dynamic library ; lots of errors
« on: February 10, 2014, 08:32:33 pm »I repeatedly get this error in my logs:
Subject: Cron <root@srv01> [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete
Content-Type: text/plain; charset=ANSI_X3.4-1968
X-Cron-Env: <SHELL=/bin/sh>
X-Cron-Env: <HOME=/root>
X-Cron-Env: <PATH=/usr/bin:/bin>
X-Cron-Env: <LOGNAME=root>
Message-Id: <20140210183901.8E9831C0BDA@srv01.mylan.lan>
Date: Mon, 10 Feb 2014 19:39:01 +0100 (CET)
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20090626/mapi.so' - /usr/lib/libicalmapi.so.1: undefined symbol: _ZTIN7details18iconv_context_baseE in Unknown on line 0
What to do ?
I also get lots of errors in sogo.log:
Feb 10 14:08:26 sogod [28537]: [ERROR] <0x0x7fb79f9416e0[WOWatchDog]> an exception occured in runloop <NSException: 0x7fb79f7c14d0> NAME:IOException REASON:a problem occurred during db initialization INFO:(null)
Feb 10 14:08:26 sogod [27620]: <0x0x7fb79f864640[WOWatchDogChild]> child 28537 exited
Feb 10 14:08:26 sogod [27620]: <0x0x7fb79f864640[WOWatchDogChild]> avoiding to respawn child before 2014-02-10 14:08:31 +0000
Feb 10 14:08:31 sogod [27620]: <0x0x7fb79f9416e0[WOWatchDog]> child spawned with pid 28550
2014-02-10 14:08:31.435 sogod[27620] No value specified for 'SOGoProfileURL'
2014-02-10 14:08:31.435 sogod[27620] No value specified for 'OCSFolderInfoURL'
Feb 10 14:08:31 sogod [28550]: [ERROR] <0x0x7fb79f9416e0[WOWatchDog]> an exception occured in runloop <NSException: 0x7fb79f8d4870> NAME:IOException REASON:a problem occurred during db initialization INFO:(null)
Feb 10 14:08:31 sogod [27620]: <0x0x7fb79f864640[WOWatchDogChild]> child 28550 exited
Feb 10 14:08:31 sogod [27620]: <0x0x7fb79f864640[WOWatchDogChild]> avoiding to respawn child before 2014-02-10 14:08:36 +0000
Feb 10 14:08:36 sogod [27620]: <0x0x7fb79f9416e0[WOWatchDog]> child spawned with pid 28551
2014-02-10 14:08:36.435 sogod[27620] No value specified for 'SOGoProfileURL'
2014-02-10 14:08:36.436 sogod[27620] No value specified for 'OCSFolderInfoURL'
Feb 10 14:08:36 sogod [28551]: [ERROR] <0x0x7fb79f9416e0[WOWatchDog]> an exception occured in runloop <NSException: 0x7fb79f7c14d0> NAME:IOException REASON:a problem occurred during db initialization INFO:(null)
Feb 10 14:08:36 sogod [27620]: <0x0x7fb79f864640[WOWatchDogChild]> child 28551 exited
Feb 10 14:08:36 sogod [27620]: <0x0x7fb79f864640[WOWatchDogChild]> avoiding to respawn child before 2014-02-10 14:08:41 +0000
Feb 10 14:08:41 sogod [27620]: <0x0x7fb79f9416e0[WOWatchDog]> child spawned with pid 28552
2014-02-10 14:08:41.436 sogod[27620] No value specified for 'SOGoProfileURL'
2014-02-10 14:08:41.436 sogod[27620] No value specified for 'OCSFolderInfoURL'
Feb 10 14:08:41 sogod [28552]: [ERROR] <0x0x7fb79f9416e0[WOWatchDog]> an exception occured in runloop <NSException: 0x7fb79f8d4870> NAME:IOException REASON:a problem occurred during db initialization INFO:(null)
Feb 10 14:08:41 sogod [27620]: <0x0x7fb79f864640[WOWatchDogChild]> child 28552 exited
Feb 10 14:08:41 sogod [27620]: <0x0x7fb79f864640[WOWatchDogChild]> avoiding to respawn child before 2014-02-10 14:08:46 +0000
Feb 10 14:08:46 sogod [27620]: <0x0x7fb79f9416e0[WOWatchDog]> child spawned with pid 28558
2014-02-10 14:08:46.436 sogod[27620] No value specified for 'SOGoProfileURL'
2014-02-10 14:08:46.436 sogod[27620] No value specified for 'OCSFolderInfoURL'
Feb 10 14:08:46 sogod [28558]: [ERROR] <0x0x7fb79f9416e0[WOWatchDog]> an exception occured in runloop <NSException: 0x7fb79f7c14d0> NAME:IOException REASON:a problem occurred during db initialization INFO:(null)
Feb 10 14:08:46 sogod [27620]: <0x0x7fb79f864640[WOWatchDogChild]> child 28558 exited
Feb 10 14:08:46 sogod [27620]: <0x0x7fb79f864640[WOWatchDogChild]> avoiding to respawn child before 2014-02-10 14:08:51 +0000
Feb 10 14:08:51 sogod [27620]: <0x0x7fb79f9416e0[WOWatchDog]> child spawned with pid 28559
2014-02-10 14:08:51.436 sogod[27620] No value specified for 'SOGoProfileURL'
2014-02-10 14:08:51.436 sogod[27620] No value specified for 'OCSFolderInfoURL'
Feb 10 14:08:51 sogod [28559]: [ERROR] <0x0x7fb79f9416e0[WOWatchDog]> an exception occured in runloop <NSException: 0x7fb79f8d4870> NAME:IOException REASON:a problem occurred during db initialization INFO:(null)
From the kernel.log: More errors:
Feb 10 15:55:19 srv01 kernel: [ 29.764026] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:55:25 srv01 kernel: [ 35.776026] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:55:31 srv01 kernel: [ 41.788019] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:55:37 srv01 kernel: [ 47.800047] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:55:42 srv01 kernel: [ 53.029394] ip_tables: (C) 2000-2006 Netfilter Core Team
Feb 10 15:55:42 srv01 kernel: [ 53.091140] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Feb 10 15:55:43 srv01 kernel: [ 53.812049] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:55:49 srv01 kernel: [ 59.824024] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:55:55 srv01 kernel: [ 65.836024] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:56:01 srv01 kernel: [ 71.848051] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:56:07 srv01 kernel: [ 77.860019] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:56:13 srv01 kernel: [ 83.872019] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:56:19 srv01 kernel: [ 89.884016] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:56:25 srv01 kernel: [ 95.896015] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:56:31 srv01 kernel: [ 101.908015] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:56:37 srv01 kernel: [ 107.920046] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:56:43 srv01 kernel: [ 113.932017] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:56:49 srv01 kernel: [ 119.944017] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:56:55 srv01 kernel: [ 125.956018] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:57:01 srv01 kernel: [ 131.968017] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:57:07 srv01 kernel: [ 137.980015] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:57:13 srv01 kernel: [ 143.992014] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:57:19 srv01 kernel: [ 150.004015] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:57:25 srv01 kernel: [ 156.016056] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:57:31 srv01 kernel: [ 162.028015] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:57:37 srv01 kernel: [ 168.040025] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:57:43 srv01 kernel: [ 174.052017] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
Feb 10 15:57:49 srv01 kernel: [ 180.064017] mei 0000:00:03.0: unexpected reset: dev_state = RESETING
If these errors should say anything to me, let me know
114
Installation and Upgrades / Heeeelp me all mails are vanishing and I dont know what to do now
« on: February 10, 2014, 07:51:59 pm »
Hello,
I installed Zentyal 3.3 and all updates on a HP 7800 P Quadcore. Almost all software packets were installed, with the exception of HTTPProxy, Jabber, Layer7-Filtering, Mail-Filter and Radius. All updates to all packets were installed.
Zentyal seems to run fine. Thus, I added some users: "user1" , "user2" @mydomain.lan
I can log in to the webmail interface with http://192.168.0.11/webmail - user1@mydomain.lan can log in fine, so can user2@ etc.
Everything APPEARS to be fine, but isn't. When I send a mail from user1@mydomain.lan to user2@mydomain.lan, it never arrives at user2's mail box. At least that's what it is looking like when I log in to webmail as "user2". Same for user1. No matter how many mails I send from user1 to user2 and vice versa, they never appear in the inbox of that user. Their inbox is always empty.
What can I do? I checked for everything and I cannot find the bug. Any advice where to look for, is appreciated.
I installed Zentyal 3.3 and all updates on a HP 7800 P Quadcore. Almost all software packets were installed, with the exception of HTTPProxy, Jabber, Layer7-Filtering, Mail-Filter and Radius. All updates to all packets were installed.
Zentyal seems to run fine. Thus, I added some users: "user1" , "user2" @mydomain.lan
I can log in to the webmail interface with http://192.168.0.11/webmail - user1@mydomain.lan can log in fine, so can user2@ etc.
Everything APPEARS to be fine, but isn't. When I send a mail from user1@mydomain.lan to user2@mydomain.lan, it never arrives at user2's mail box. At least that's what it is looking like when I log in to webmail as "user2". Same for user1. No matter how many mails I send from user1 to user2 and vice versa, they never appear in the inbox of that user. Their inbox is always empty.
What can I do? I checked for everything and I cannot find the bug. Any advice where to look for, is appreciated.
115
Installation and Upgrades / Re: Where to specify the password for fetching external mail?
« on: February 09, 2014, 11:32:48 pm »
NEXT problem: Under "Users and Computers", I do not have the option to go to USERS -> USER CORNER.
It is simply not there.
I have the options "Manage", "Standard Template" , "Synchronization" and "LDAP Settings". No "User corner" below the "LDAP Settings" option.
What now, how do I get the user corner? How do I get that user corner to listen to port 8888 etc.etc. ?
It is simply not there.
I have the options "Manage", "Standard Template" , "Synchronization" and "LDAP Settings". No "User corner" below the "LDAP Settings" option.
What now, how do I get the user corner? How do I get that user corner to listen to port 8888 etc.etc. ?
116
Installation and Upgrades / Re: Where to specify the password for fetching external mail?
« on: January 29, 2014, 03:31:15 pm »
I looked at the docs everywhere, but I swear that the "password" field is absent in my case.
It should look like this:
http://trac.zentyal.org/chrome/site/_images/usercorner-external-mail.png
but it does not look like this for me. No "password" field. Weird ?!
It should look like this:
http://trac.zentyal.org/chrome/site/_images/usercorner-external-mail.png
but it does not look like this for me. No "password" field. Weird ?!
117
Installation and Upgrades / Where to specify the password for fetching external mail?
« on: January 29, 2014, 09:27:37 am »
Hello,
Zentyal has the option to fetch mail from external accounts, which is exactly, what I need.
* I have a local domain and a local server srv01.localdomain.local
* several local users exist: user1, user2, user3 etc.
* all of them have external mail accounts, like office@company.com, techsupport@company.com
* Zentyal is supposed to regularily fetch these external mails, store them into some internal IMAP server so the users can use the internal IMAP server to read the external mail and respond to it.
Now the question: How do I tell the Zentyal server what the password is for fetching the external mail ??
I could not find a 'password' field anywhere.
Are the local users supposed to have the same login password for logging in locally as for fetching the external mail ?
Where does the Zentyal server store the passwords for fetching the external mail ?
Zentyal has the option to fetch mail from external accounts, which is exactly, what I need.
* I have a local domain and a local server srv01.localdomain.local
* several local users exist: user1, user2, user3 etc.
* all of them have external mail accounts, like office@company.com, techsupport@company.com
* Zentyal is supposed to regularily fetch these external mails, store them into some internal IMAP server so the users can use the internal IMAP server to read the external mail and respond to it.
Now the question: How do I tell the Zentyal server what the password is for fetching the external mail ??
I could not find a 'password' field anywhere.
Are the local users supposed to have the same login password for logging in locally as for fetching the external mail ?
Where does the Zentyal server store the passwords for fetching the external mail ?
118
Installation and Upgrades / Re: No video on local graphics card
« on: December 30, 2013, 09:54:00 am »
I solved my issue!
I looked at the BIOS settings again, and found out we have had every BIOS setting to "default" by accident (sheer negligence).
I enabled "VGA Palette Snoop" and suddenly Zentyal worked like a charm and displayed everything.
I looked at the BIOS settings again, and found out we have had every BIOS setting to "default" by accident (sheer negligence).
I enabled "VGA Palette Snoop" and suddenly Zentyal worked like a charm and displayed everything.
119
Installation and Upgrades / domain runs, but cannot make dirs or upload files to zentyal server?
« on: December 17, 2013, 11:23:17 pm »
Hello,
I'm sorry, but I have a strange question. (Though I am no Linux newbie, I know I'll sound like one in this special case...)
I have installed Zentyal 3.2 - Office version. I added some users (ATT1, ATT2, ATT3).
I can change the settings of my Windows 7 client to use the Zentyal domain to log in as $username - logging in over the domain works fine.
But now the troubles start...
a) Trouble 1
On the windows client I can see the network share called :
\\Zentyal\sysvol\zentyal-domain.lan\Policies\
\\Zentyal\sysvol\zentyal-domain.lan\scripts\
I can enter these dirs, but I cannot make my own directory anywhere and upload files anywhere. I guess it must have to do with permissions and access rights, but afaik I did everything right...
b) Trouble 2
I can log in as Windows 7 "zentyaluser" (ATT1,2,3) but when opening Outlook2013 , Outlook says "Cannot find Exchange Server" - though kerberos, etc.etc. is clearly running.
Any advice?
I'm sorry, but I have a strange question. (Though I am no Linux newbie, I know I'll sound like one in this special case...)
I have installed Zentyal 3.2 - Office version. I added some users (ATT1, ATT2, ATT3).
I can change the settings of my Windows 7 client to use the Zentyal domain to log in as $username - logging in over the domain works fine.
But now the troubles start...
a) Trouble 1
On the windows client I can see the network share called :
\\Zentyal\sysvol\zentyal-domain.lan\Policies\
\\Zentyal\sysvol\zentyal-domain.lan\scripts\
I can enter these dirs, but I cannot make my own directory anywhere and upload files anywhere. I guess it must have to do with permissions and access rights, but afaik I did everything right...
b) Trouble 2
I can log in as Windows 7 "zentyaluser" (ATT1,2,3) but when opening Outlook2013 , Outlook says "Cannot find Exchange Server" - though kerberos, etc.etc. is clearly running.
Any advice?
120
Installation and Upgrades / Re: No video on local graphics card
« on: December 15, 2013, 03:32:13 pm »
I have a similar issue. I installed Zentyal, after installation it said "ready for reboot", the machine rebooted, the BIOS screen appeared, but as soon as the bootblock loading is over and Zentyal boots, there is no video output on any screen what-so-ever.
The system is a dual Xeon board from Intel with an "Aspeed AST1150" graphics card on-board.
Any help is greatly appreciated.
The system is a dual Xeon board from Intel with an "Aspeed AST1150" graphics card on-board.
Any help is greatly appreciated.