This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
31
German / SOGo Webfrontend - Zugriff von Außen
« on: March 30, 2014, 10:23:15 pm »
Hallo,
wie kann ich dem Zentyal-SOGo Webfrontend beibringen, Logins auch über https aus dem Internet entgegen zu nehmen?
Im lokalen Netz klappt der Zugriff.
Die Firewall lässt momentan http, https und ftp aus dem I-Net zu, das reicht aber für SOGo irgendwie nicht.
Schöne Grüße aus Leipzig
Denis
wie kann ich dem Zentyal-SOGo Webfrontend beibringen, Logins auch über https aus dem Internet entgegen zu nehmen?
Im lokalen Netz klappt der Zugriff.
Die Firewall lässt momentan http, https und ftp aus dem I-Net zu, das reicht aber für SOGo irgendwie nicht.
Schöne Grüße aus Leipzig
Denis
32
Installation and Upgrades / activate Module zentyal-mail failed
« on: March 27, 2014, 08:09:23 pm »
Hallo,
because of a "very fast click" I removed all email stuff.
I reinstalled all and as I want to activate it then I run in following error:
Failed to enable E-Mail: Address liebetrau@dantschke.org is already in use by the Benutzer liebetrau
But I cant see this user. I know that I created this user with zentyal webfrontend.
How can i delete this user or his mail address via script?
with best regards
Denis
by the way I'm using zentyal 3.4 64bit
because of a "very fast click" I removed all email stuff.
I reinstalled all and as I want to activate it then I run in following error:
Failed to enable E-Mail: Address liebetrau@dantschke.org is already in use by the Benutzer liebetrau
But I cant see this user. I know that I created this user with zentyal webfrontend.
How can i delete this user or his mail address via script?
with best regards
Denis
by the way I'm using zentyal 3.4 64bit
33
Installation and Upgrades / Re: Can't add new users...
« on: March 25, 2014, 01:45:32 pm »
Hallo,
is there nobody who can take a look to the attached trace ? The problem is that I need to create 2 new users and I don't want to solve this problem via complete reinstall of this server...
with best regards
Denis
is there nobody who can take a look to the attached trace ? The problem is that I need to create 2 new users and I don't want to solve this problem via complete reinstall of this server...
with best regards
Denis
34
Installation and Upgrades / Re: Can't add new users...
« on: March 24, 2014, 09:37:37 pm »
Hallo Robb,
my problem is that I'm not able to save a new user.
I don't have more than 500 accounts (only 14)
If I want to save I get the message that an unexpected error has occurred....
Under technical details I see the message I posted before.
There is written something about a wrong SID ...
The message behind the trace button:
with best regards Denis
my problem is that I'm not able to save a new user.
I don't have more than 500 accounts (only 14)
If I want to save I get the message that an unexpected error has occurred....
Under technical details I see the message I posted before.
There is written something about a wrong SID ...
The message behind the trace button:
Code: [Select]
Trace
root command echo 'dn: CN=
changetype: add
xidNumber: 50000
objectSid:
objectClass: sidMap
type: ID_TYPE_UID
cn:
' | ldbmodify -H /opt/samba4/private/idmap.ldb failed.
Error output: Failed to parse ldif
Command output: GENSEC backend 'gssapi_spnego' registered
GENSEC backend 'gssapi_krb5' registered
GENSEC backend 'gssapi_krb5_sasl' registered
GENSEC backend 'schannel' registered
GENSEC backend 'spnego' registered
GENSEC backend 'ntlmssp' registered
GENSEC backend 'krb5' registered
GENSEC backend 'fake_gssapi_krb5' registered
string_to_sid: SID is not in a valid format
Modify failed after processing 0 records
.
Exit value: 1 at /usr/share/perl5/Error.pm line 182
Error::throw('EBox::Exceptions::Sudo::Command', 'cmd', 'echo \'dn: CN=\x{a}changetype: add\x{a}xidNumber: 50000\x{a}objectSid: \x{a}o...', 'output', 'ARRAY(0x7fa4ba1e4718)', 'error', 'ARRAY(0x7fa4b993ce88)', 'exitValue', 1, ...) called at /usr/share/perl5/EBox/Sudo.pm line 233
EBox::Sudo::_rootError('/usr/bin/sudo -p sudo: /var/lib/zentyal/tmp/T3MI4HKkVu.cmd 2>...', 'echo \'dn: CN=\x{a}changetype: add\x{a}xidNumber: 50000\x{a}objectSid: \x{a}o...', 256, 'ARRAY(0x7fa4ba1e4718)', 'ARRAY(0x7fa4b993ce88)') called at /usr/share/perl5/EBox/Sudo.pm line 202
EBox::Sudo::_root(1, 'echo \'dn: CN=\x{a}changetype: add\x{a}xidNumber: 50000\x{a}objectSid: \x{a}o...') called at /usr/share/perl5/EBox/Sudo.pm line 153
EBox::Sudo::root('echo \'dn: CN=\x{a}changetype: add\x{a}xidNumber: 50000\x{a}objectSid: \x{a}o...') called at /usr/share/perl5/EBox/LDB/IdMapDb.pm line 43
EBox::LDB::IdMapDb::setupNameMapping('EBox::LDB::IdMapDb=HASH(0x7fa4ba086230)', undef, 'ID_TYPE_UID', 50000) called at /usr/share/perl5/EBox/Samba/User.pm line 245
EBox::Samba::User::setupUidMapping('EBox::Samba::User=HASH(0x7fa4b9d95ec8)', 50000) called at /usr/share/perl5/EBox/SambaLdapUser.pm line 78
EBox::SambaLdapUser::_preAddUser('EBox::SambaLdapUser=HASH(0x7fa4ba1d0980)', 'Net::LDAP::Entry=HASH(0x7fa4ba1792a8)') called at /usr/share/perl5/EBox/UsersAndGroups.pm line 1219
EBox::UsersAndGroups::notifyModsPreLdapUserBase('EBox::UsersAndGroups=HASH(0x7fa4b88a9528)', 'preAddUser', 'Net::LDAP::Entry=HASH(0x7fa4ba1792a8)', undef, undef) called at /usr/share/perl5/EBox/UsersAndGroups/User.pm line 672
EBox::UsersAndGroups::User::create('EBox::UsersAndGroups::User', 'HASH(0x7fa4b9dbe2f8)', 0) called at /usr/share/perl5/EBox/CGI/UsersAndGroups/AddUser.pm line 73
EBox::CGI::UsersAndGroups::AddUser::_process('EBox::CGI::UsersAndGroups::AddUser=HASH(0x7fa4b98b7338)') called at /usr/share/perl5/EBox/CGI/Base.pm line 286
EBox::CGI::Base::run('EBox::CGI::UsersAndGroups::AddUser=HASH(0x7fa4b98b7338)') called at /usr/share/perl5/EBox/CGI/Run.pm line 132
EBox::CGI::Run::run('EBox::CGI::Run', 'UsersAndGroups/AddUser', 'EBox') called at /usr/share/zentyal/cgi/ebox.cgi line 37
ModPerl::ROOT::ModPerl::Registry::usr_share_zentyal_cgi_ebox_2ecgi::handler('Apache2::RequestRec=SCALAR(0x7fa4b9ab7f58)') called at /usr/lib/perl5/ModPerl/RegistryCooker.pm line 204
eval {...} called at /usr/lib/perl5/ModPerl/RegistryCooker.pm line 204
ModPerl::RegistryCooker::run('ModPerl::Registry=HASH(0x7fa4b981de68)') called at /usr/lib/perl5/ModPerl/RegistryCooker.pm line 170
ModPerl::RegistryCooker::default_handler('ModPerl::Registry=HASH(0x7fa4b981de68)') called at /usr/lib/perl5/ModPerl/Registry.pm line 31
ModPerl::Registry::handler('ModPerl::Registry', 'Apache2::RequestRec=SCALAR(0x7fa4b9ab7f58)') called at -e line 0
eval {...} called at -e line 0
with best regards Denis
35
Installation and Upgrades / Can't add new users...
« on: March 24, 2014, 08:49:33 pm »
Hallo,
since one week I'm not able to add a new user.
My System is a Zentyal 3.0.32 Server with Samba DC. Is there any possibility to fix this problem?
with best regards
Denis
since one week I'm not able to add a new user.
My System is a Zentyal 3.0.32 Server with Samba DC. Is there any possibility to fix this problem?
Code: [Select]
root command echo 'dn: CN= changetype: add xidNumber: 50000 objectSid: objectClass: sidMap type: ID_TYPE_UID cn: ' | ldbmodify -H /opt/samba4/private/idmap.ldb failed. Error output: Failed to parse ldif Command output: GENSEC backend 'gssapi_spnego' registered GENSEC backend 'gssapi_krb5' registered GENSEC backend 'gssapi_krb5_sasl' registered GENSEC backend 'schannel' registered GENSEC backend 'spnego' registered GENSEC backend 'ntlmssp' registered GENSEC backend 'krb5' registered GENSEC backend 'fake_gssapi_krb5' registered string_to_sid: SID is not in a valid format Modify failed after processing 0 records . Exit value: 1
with best regards
Denis
36
Installation and Upgrades / Re: No listen sockets or ports specified
« on: December 05, 2012, 10:04:02 am »
Hallo,
The problem is solved partially...
I restored the modules configuration from backup but now I've got an error for Jabber ldap part:
jabberUid: attribute type undefined
How can I extend my ldap database for jabber? Desinstall and reinstall of jabber module don't help.
best regards
Denis
The problem is solved partially...
I restored the modules configuration from backup but now I've got an error for Jabber ldap part:
jabberUid: attribute type undefined
How can I extend my ldap database for jabber? Desinstall and reinstall of jabber module don't help.
best regards
Denis
37
Installation and Upgrades / No listen sockets or ports specified
« on: December 04, 2012, 06:03:20 pm »
Hallo,
I'm using Zentyal 3.0.
After an upgrade of Zentyal modules Core, Users, Mailfilter(?) toda I've got this error in Logfiles:
No listen sockets or ports specified
and when fetchmail is geting the mails then
Recipient address rejected: User unknown in virtual mailbox table
And the mails are not delivered anymore....
It seems ther is something wrong with ldap too???
Can someone give me a hint? I can't start amavis anymore too since this update. Maybe there is something wrong in the new amavis.conf or in postfix part ...
best regards
Denis
I'm using Zentyal 3.0.
After an upgrade of Zentyal modules Core, Users, Mailfilter(?) toda I've got this error in Logfiles:
No listen sockets or ports specified
and when fetchmail is geting the mails then
Recipient address rejected: User unknown in virtual mailbox table
And the mails are not delivered anymore....
It seems ther is something wrong with ldap too???
Can someone give me a hint? I can't start amavis anymore too since this update. Maybe there is something wrong in the new amavis.conf or in postfix part ...
best regards
Denis
38
Installation and Upgrades / Re: dhcp-module shows as stoped and can't be activated
« on: June 21, 2011, 10:57:39 am »
Hallo,
Yes apparmor was the reason ...
There where some files deleted. The whole directory /etc/apparmor.d/ was empty.
I made a copy of this files from other zentyal machine and now all is fine
thank you for support.
Denis
Yes apparmor was the reason ...
There where some files deleted. The whole directory /etc/apparmor.d/ was empty.
I made a copy of this files from other zentyal machine and now all is fine
thank you for support.
Denis
39
Installation and Upgrades / Re: dhcp-module shows as stoped and can't be activated
« on: June 20, 2011, 11:34:55 pm »
Hallo
I'am not soo familar with apparmor yet ...
I'am not soo familar with apparmor yet ...
40
Installation and Upgrades / Re: dhcp-module shows as stoped and can't be activated
« on: June 20, 2011, 11:33:21 pm »
Hallo,
/etc/apparmor.d/usr.sbin.dhcpd3
the directory /etc/apparmor.d/tunables/global is empty ....
there has to be the global and the home variable - right?
Denis
/etc/apparmor.d/usr.sbin.dhcpd3
Code: [Select]
# This profile has been modified by Zentyal Server to provide Dynamic
# DNS feature
#include <tunables/global>
/usr/sbin/dhcpd3 {
#include <abstractions/base>
#include <abstractions/nameservice>
#include <abstractions/ssl_keys>
capability net_bind_service,
capability net_raw,
capability setgid,
capability setuid,
network inet raw,
network packet packet,
/etc/hosts.allow r,
/etc/hosts.deny r,
/etc/dhcp3/ r,
/etc/dhcp3/** r,
/etc/dhcpd.conf r,
/etc/dhcpd_ldap.conf r,
/usr/sbin/dhcpd3 mr,
/var/lib/dhcp3/dhcpd.leases* lrw,
/var/log/ r,
/var/log/** rw,
/var/run/dhcp3-server/dhcpd.pid w,
# LTSP. See:
# http://www.ltsp.org/~sbalneav/LTSPManual.html
# https://wiki.edubuntu.org/
/etc/ltsp/ r,
/etc/ltsp/** r,
/etc/dhcpd-k12ltsp.conf r,
/etc/dhcpd.leases* lrw,
/ltsp/ r,
/ltsp/** r,
# Eucalyptus
/var/run/eucalyptus/net/ r,
/var/run/eucalyptus/net/** r,
/var/run/eucalyptus/net/*.pid lrw,
/var/run/eucalyptus/net/*.leases* lrw,
/var/run/eucalyptus/net/*.trace lrw,
# For dynamic DNS (Zentyal)
/etc/bind/keys r,
# For allowing custom tweaking (Zentyal)
/etc/ebox/dhcp/* r,
}
the directory /etc/apparmor.d/tunables/global is empty ....
there has to be the global and the home variable - right?
Denis
41
Installation and Upgrades / [solved] dhcp-module shows as stoped and can't be activated
« on: June 20, 2011, 11:07:31 pm »
Hallo,
my problem here ist that the dhcp-module is not working correctly.
In the dashboard the module is shown as stoped an when I try to activate following message:
/var/log/ebox/ebox.log
it seems there is a probelm with dhcp-module ...
when I start the dhcp-server by hand
The dhcp-module is version 2.0.6, installed and activated.
Is this behaviour known?
Denis
my problem here ist that the dhcp-module is not working correctly.
In the dashboard the module is shown as stoped an when I try to activate following message:
Code: [Select]
Error restarting service. See /var/log/ebox/ebox.log for more information.
/var/log/ebox/ebox.log
Code: [Select]
2011/06/20 23:01:25 ERROR> RestartService.pm:57 EBox::CGI::EBox::RestartService::__ANON__ - Restart of EBox::DHCP=HASH(0x7f565e3f9070) from dashboard failed: root command /etc/init.d/apparmor restart failed.
Error output: Found reference to variable HOME, but is never declared
AppArmor parser error for /etc/apparmor.d/usr.sbin.dhcpd3 in /etc/apparmor.d/usr.sbin.dhcpd3 at line 4: Could not open 'tunables/global'
Command output: * Reloading AppArmor profiles
...fail!
.
Exit value: 123
it seems there is a probelm with dhcp-module ...
when I start the dhcp-server by hand
Code: [Select]
/etc/init.d/ebox dhcp restart
the dhcp-server ist starts working and the dhcp-module is shown as stoped.The dhcp-module is version 2.0.6, installed and activated.
Is this behaviour known?
Denis
42
Installation and Upgrades / Re: Problem: Ldap not indexed
« on: February 25, 2011, 12:19:26 pm »
Hallo,
I solved this problem on this way:
http://muzso.hu/2010/04/26/fixing-bdb_equality_candidates-errors-on-your-openldap-server
but in my case the index-files of ldap-tree are in /var/lib/ldap (for changing the rights) and not in /var/lib/slapd as described in this Howto
regards Denis
I solved this problem on this way:
http://muzso.hu/2010/04/26/fixing-bdb_equality_candidates-errors-on-your-openldap-server
but in my case the index-files of ldap-tree are in /var/lib/ldap (for changing the rights) and not in /var/lib/slapd as described in this Howto
regards Denis
43
Installation and Upgrades / Problem: Ldap not indexed
« on: February 21, 2011, 02:49:08 pm »
Hallo
I'm new in this Forum and not so expirienced in ldap.
I hav following problem:
It seems that the ldap-tree is not indexed for some fields.
I use Zentyal 2.0.15 with 64 bits.
Regards Denis
I'm new in this Forum and not so expirienced in ldap.
I hav following problem:
Code: [Select]
Feb 21 14:25:35 dmt1 slapd[14121]: <= bdb_equality_candidates: (zarafaAccount) not indexed
Feb 21 14:25:35 dmt1 slapd[14121]: <= bdb_equality_candidates: (uidNumber) not indexed
Feb 21 14:25:35 dmt1 slapd[14121]: <= bdb_equality_candidates: (zarafaAccount) not indexed
Feb 21 14:25:35 dmt1 slapd[14121]: <= bdb_equality_candidates: (uidNumber) not indexed
It seems that the ldap-tree is not indexed for some fields.
I use Zentyal 2.0.15 with 64 bits.
Regards Denis