This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
46
Installation and Upgrades / Bug with DNS on Zentyal 3.3.4 - and a Work Around
« on: February 01, 2014, 01:10:22 am »
Hi
I probably found a bug... Well.. It is not exactly a bug...
But, many Microsoft network admins usually put an underscore ( _ ) on there server name...
In my case server_ad...
Bind 9 do not allowed underscore when set a new record on bind zone.
With this behavior, I am unabe to join a AD domain, where the server name inclue underscore...
So, I put this lines:
check-names master ignore;
check-names slave ignore;
check-names response ignore;
on /usr/share/zentyal/stubs/dns/named.conf.options.mas
This is a work around, but work here for me...
I probably found a bug... Well.. It is not exactly a bug...
But, many Microsoft network admins usually put an underscore ( _ ) on there server name...
In my case server_ad...
Bind 9 do not allowed underscore when set a new record on bind zone.
With this behavior, I am unabe to join a AD domain, where the server name inclue underscore...
So, I put this lines:
check-names master ignore;
check-names slave ignore;
check-names response ignore;
on /usr/share/zentyal/stubs/dns/named.conf.options.mas
This is a work around, but work here for me...
47
Installation and Upgrades / Unable Clone rules
« on: January 20, 2014, 03:38:35 pm »
Hello friends....
I am currently use zentyal 3.3 and I noticed that I can't clone any rules, whatever firewall, proxy or any others...
Is there some fix for that?
I am currently use zentyal 3.3 and I noticed that I can't clone any rules, whatever firewall, proxy or any others...
Is there some fix for that?
48
Installation and Upgrades / FSMO and GPO
« on: January 13, 2014, 09:11:43 pm »
Hello friends...
Somebody here has experience with FSMO and GPO migration??
I wanna know if when we perform such migration, the GPO rules will migrate as well...
Thanks...
Somebody here has experience with FSMO and GPO migration??
I wanna know if when we perform such migration, the GPO rules will migrate as well...
Thanks...
49
Portuguese / [OFF-TOPIC] Monitor Skype...
« on: January 10, 2014, 08:23:50 pm »
Olá amigos
Alguém conhece algum monitor de skype, pra fazer gravação nem que seja somente do chat em modo texto??
Lembro que no tempo do MSN tinhamos o IMSPector... Mas este não funciona com o skype infelizmente.
Qualquer ajuda é bem vinda.
Obrigado
Alguém conhece algum monitor de skype, pra fazer gravação nem que seja somente do chat em modo texto??
Lembro que no tempo do MSN tinhamos o IMSPector... Mas este não funciona com o skype infelizmente.
Qualquer ajuda é bem vinda.
Obrigado
50
Installation and Upgrades / Zentyal 3.4
« on: January 10, 2014, 02:50:20 pm »
Hello Zentyal staff
Where can I download Zentyal 3.4 for test??
I'm waiting for... =)
Where can I download Zentyal 3.4 for test??
I'm waiting for... =)
51
Installation and Upgrades / Edit GPO on Webadmin
« on: January 10, 2014, 02:44:31 pm »
Hi friends...
someone here got it edit gpo over web interface?
I am using Zentyal 3.3.2 and when I click on edit button, nothing happens...
someone?
someone here got it edit gpo over web interface?
I am using Zentyal 3.3.2 and when I click on edit button, nothing happens...
someone?
52
Portuguese / Firewall com 2 lan's distintas
« on: December 13, 2013, 12:02:30 pm »
Olá pessoal...
Tenho aqui um Zentyal 3.2 como gateway e duas lan's: 10.1.1.0 e 10.0.0.0
Acontece que não quero que as redes conversem entre si.
Por isso adicionei uma regra para impedir qualquer comunicação entre as redes mas a regra não funciona.
Criei dois objetos, lan1 = 10.0.0.0 e lan2 = 10.1.1.0.
No firewall, em Filter rules for internal network, eu coloquei uma regra para bloquear (deny - negar) a comunicação, assim:
Decisão Origem Destino Descrição
Negar lan1 lan2 Qualquer
Negar lan2 lan1 Qualquer
Mas a regra não funciona... O Firewall está no VMWare ESXi 5. Estou desconfiado de algo no VSwitch... Sei lá...
Os clientes são duas maquinas com Windows XP normal...
Eu fiz testes com o Zentyal virtualizado em um Virtualbox e 2 VM com WIndows XP e funcionou... Porém no VMWare não funciona.
Agora estou pegando um equipamento e fazendo os testes com servidor físico.
Alguém tem alguma outra dica??
Obrigado
Tenho aqui um Zentyal 3.2 como gateway e duas lan's: 10.1.1.0 e 10.0.0.0
Acontece que não quero que as redes conversem entre si.
Por isso adicionei uma regra para impedir qualquer comunicação entre as redes mas a regra não funciona.
Criei dois objetos, lan1 = 10.0.0.0 e lan2 = 10.1.1.0.
No firewall, em Filter rules for internal network, eu coloquei uma regra para bloquear (deny - negar) a comunicação, assim:
Decisão Origem Destino Descrição
Negar lan1 lan2 Qualquer
Negar lan2 lan1 Qualquer
Mas a regra não funciona... O Firewall está no VMWare ESXi 5. Estou desconfiado de algo no VSwitch... Sei lá...
Os clientes são duas maquinas com Windows XP normal...
Eu fiz testes com o Zentyal virtualizado em um Virtualbox e 2 VM com WIndows XP e funcionou... Porém no VMWare não funciona.
Agora estou pegando um equipamento e fazendo os testes com servidor físico.
Alguém tem alguma outra dica??
Obrigado
53
Installation and Upgrades / Deny forward between different lan's
« on: December 13, 2013, 11:48:17 am »
Hello
I have here a VMware VM running Zentyal 3.2 and create on VMWare 2 lan's, like 10.1.1.0 and 10.0.0.0.
I create two network object to identify those lan's and set it on the Firewall, creating a rule to deny all communication between those LAN's but de rule doesn't works...
When I running MSDOS with ping command to other LAN, like from 10.1.1.1 to 10.0.0.1, the ping works pretty well...
But, I also try it on VirtualBox with 3 VM's, one Zentyal and two Windows XP, and work very well...
I wanna know if that some tricks to do about VMWare or VSwitch in order to make this scenario work on VMWare environment...
I also try it with Zentyal 3.3 and the results is the same: Works on VirtualBox and do not work on VMWare ESXi 5....
Now I'll try it in physical equipament, and post the results laters....
Thanks for any advice...
[]'s
I have here a VMware VM running Zentyal 3.2 and create on VMWare 2 lan's, like 10.1.1.0 and 10.0.0.0.
I create two network object to identify those lan's and set it on the Firewall, creating a rule to deny all communication between those LAN's but de rule doesn't works...
When I running MSDOS with ping command to other LAN, like from 10.1.1.1 to 10.0.0.1, the ping works pretty well...
But, I also try it on VirtualBox with 3 VM's, one Zentyal and two Windows XP, and work very well...
I wanna know if that some tricks to do about VMWare or VSwitch in order to make this scenario work on VMWare environment...
I also try it with Zentyal 3.3 and the results is the same: Works on VirtualBox and do not work on VMWare ESXi 5....
Now I'll try it in physical equipament, and post the results laters....
Thanks for any advice...
[]'s
54
Installation and Upgrades / Stop Spam and Virus on Gateway...
« on: December 12, 2013, 06:13:59 pm »
Hi guys
Someone knows if this how-to works on Zentyal 3.2 or 3.3:
http://forum.zentyal.org/index.php?topic=4172.0
Any idea??
Thanks
Someone knows if this how-to works on Zentyal 3.2 or 3.3:
http://forum.zentyal.org/index.php?topic=4172.0
Any idea??
Thanks
55
Installation and Upgrades / Zentyal 3.3 and samba with latin characters
« on: December 05, 2013, 02:15:58 pm »
Hello guys and specially Zentyal Team...
Even with the last version of Zentyal, we still running trouble with latin characters...
The definition on [homes] samba smb.conf files is still like this:
[homes]
comment = Diretórios Home
when we use latin language, like Brazilian Portuguese...
As we know, Samba not accept such behavior, I meant, Samba don't work with latin characters...
I make some time ago, a little patch to fix the original Zentyal smb.conf, like this one:
#!/bin/bash
cp /etc/samba/smb.conf /etc/samba/smb.conf-bkp
cat -v /etc/samba/smb.conf | sed s'/DiretM-srios Home/Diretorio Home/'g > /tmp/smb.fix
cat /tmp/smb.fix > /etc/samba/smb.conf
rm -rf /tmp/smb.fix
So I put this shell script in /etc/zentyal/post-save and everytime the samba module restart, the script fix the original smb.conf file...
But, I wonder if Zentyal can implement stuff like this on the code...
Just a note!
Thanks...
Even with the last version of Zentyal, we still running trouble with latin characters...
The definition on [homes] samba smb.conf files is still like this:
[homes]
comment = Diretórios Home
when we use latin language, like Brazilian Portuguese...
As we know, Samba not accept such behavior, I meant, Samba don't work with latin characters...
I make some time ago, a little patch to fix the original Zentyal smb.conf, like this one:
#!/bin/bash
cp /etc/samba/smb.conf /etc/samba/smb.conf-bkp
cat -v /etc/samba/smb.conf | sed s'/DiretM-srios Home/Diretorio Home/'g > /tmp/smb.fix
cat /tmp/smb.fix > /etc/samba/smb.conf
rm -rf /tmp/smb.fix
So I put this shell script in /etc/zentyal/post-save and everytime the samba module restart, the script fix the original smb.conf file...
But, I wonder if Zentyal can implement stuff like this on the code...
Just a note!
Thanks...
56
Installation and Upgrades / Mobile and OpenChange...
« on: October 29, 2013, 05:57:22 pm »
Hi
how can I set my phone to connect to Openchange in Zentyal??
how can I set my phone to connect to Openchange in Zentyal??
57
Installation and Upgrades / Zentyal Replication...
« on: October 21, 2013, 04:08:57 pm »
Hi Friends...
I nedd to know if Zentyal can performe a replication of:
- Firewall Rules
- Proxy Rules
to act like a redudance firewall...
May I explain...
I want to create two Zentyal Servers one to be a backup of another Zentyal!...
That's possible??
Thanks
I nedd to know if Zentyal can performe a replication of:
- Firewall Rules
- Proxy Rules
to act like a redudance firewall...
May I explain...
I want to create two Zentyal Servers one to be a backup of another Zentyal!...
That's possible??
Thanks
58
Installation and Upgrades / Quota not Work on Zentyal 3.2.1
« on: October 16, 2013, 06:50:08 pm »
Hello...
I set quota to an user that I add and seems to me that not work.
When I set the quota, I get this error:
2013/10/16 13:35:45 ERROR> User.pm:357 EBox::Users::User::_setFilesystemQuota - Cannot set quota for uid 3000043 to 1. Maybe your file system does not support quota?
I figure out that when I install Zentyal, I choose advanced options, like XFS Filesystem.
But the installer do not set XFS with quota support in /etc/fstab...
The installer set as defaults,userquota,grpquota... And XFS works with uquota,gquota...
That is a Zentyal error ou Ubuntu installer error???
Thanks anyway
On /etc/fstab, I have quota already activated:
/dev/mapper/adserver--vg-root / xfs defaults,usrquota,grpquota 0 1
I set quota to an user that I add and seems to me that not work.
When I set the quota, I get this error:
2013/10/16 13:35:45 ERROR> User.pm:357 EBox::Users::User::_setFilesystemQuota - Cannot set quota for uid 3000043 to 1. Maybe your file system does not support quota?
I figure out that when I install Zentyal, I choose advanced options, like XFS Filesystem.
But the installer do not set XFS with quota support in /etc/fstab...
The installer set as defaults,userquota,grpquota... And XFS works with uquota,gquota...
That is a Zentyal error ou Ubuntu installer error???
Thanks anyway
On /etc/fstab, I have quota already activated:
/dev/mapper/adserver--vg-root / xfs defaults,usrquota,grpquota 0 1
59
Installation and Upgrades / [SOLVED] Zentyal 3.3 and OpenChange
« on: October 11, 2013, 08:42:55 pm »
Hello all....
I tried used Zentyal 3.3 and Openchange in a fresh installation...
The system work pretty well... But when I tried add some user, I'm able to see the user in the Samba4 base using pdbedit -L but not in the webinterface... Like the image I send...
Some one have the same issu???
Thanks
I tried used Zentyal 3.3 and Openchange in a fresh installation...
The system work pretty well... But when I tried add some user, I'm able to see the user in the Samba4 base using pdbedit -L but not in the webinterface... Like the image I send...
Some one have the same issu???
Thanks
60
Installation and Upgrades / Linux to Zentyal
« on: September 30, 2013, 05:10:37 pm »
Hi friends...
How can I performe a migration from Linux Server, runing samba 3 to Zentyal 3.2??
Thanks
How can I performe a migration from Linux Server, runing samba 3 to Zentyal 3.2??
Thanks