Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
31
Installation and Upgrades / Re: Apache
« on: February 25, 2008, 08:01:22 pm »
I found out what was preventing my sites from being seen!
I had to open the firewall in ebox from the outside to ebox.
I had to open the firewall in ebox from the outside to ebox.
32
Installation and Upgrades / Re: Apache
« on: February 23, 2008, 04:34:48 pm »
I changed the listening port of ebox to 8443 and I can start Apache.
But...
I can see ebox with: https://192.168.1.251:8443/ebox --> works fine!
I can see lampp with: https://192.168.1.251 --> that's not what I want! I want: http://192.168.1.251
What can I do?
But...
I can see ebox with: https://192.168.1.251:8443/ebox --> works fine!
I can see lampp with: https://192.168.1.251 --> that's not what I want! I want: http://192.168.1.251
What can I do?
33
Installation and Upgrades / Re: Apache
« on: February 23, 2008, 12:41:19 pm »
I tried to install lampp!
Installation went fine!
when i try to start lampp i get this error:
What can be wrong?
Well, I did some exploring:
Installation went fine!
when i try to start lampp i get this error:
What can be wrong?
Well, I did some exploring:
34
Installation and Upgrades / Re: Apache
« on: February 23, 2008, 11:52:42 am »
What if I install lampp?
Lampp comes with the following and is installed in opt directory:
- Apache 2.2.8
- MySQL 5.0.51a
- PHP 5.2.5 & 4.4.8 & PEAR + SQLite 2.8.17/3.3.17 + multibyte (mbstring) support, Perl 5.10.0
- ProFTPD 1.3.1
- phpMyAdmin 2.11.4
- OpenSSL 0.9.8e, GD 2.0.1
- Freetype2 2.1.7
- libjpeg 6b, libpng 1.2.12
- gdbm 1.8.0
- zlib 1.2.3
- expat 1.2
- Sablotron 1.0
- libxml 2.6.31
- Ming 0.3
- Webalizer 2.01
- pdf class 009e
- ncurses 5.8
- mod_perl 2.0.2
- FreeTDS 0.63
- gettext 0.11.5
- IMAP C-Client 2004e
- OpenLDAP (client) 2.3.11
- mcrypt 2.5.7
- mhash 0.8.18
- eAccelerator 0.9.5.2
- cURL 7.17.1
- libxslt 1.1.8
- phpSQLiteAdmin 0.2
- libapreq 2.08
- FPDF 1.53
- XAMPP Control Panel 0.6
Lampp comes with the following and is installed in opt directory:
- Apache 2.2.8
- MySQL 5.0.51a
- PHP 5.2.5 & 4.4.8 & PEAR + SQLite 2.8.17/3.3.17 + multibyte (mbstring) support, Perl 5.10.0
- ProFTPD 1.3.1
- phpMyAdmin 2.11.4
- OpenSSL 0.9.8e, GD 2.0.1
- Freetype2 2.1.7
- libjpeg 6b, libpng 1.2.12
- gdbm 1.8.0
- zlib 1.2.3
- expat 1.2
- Sablotron 1.0
- libxml 2.6.31
- Ming 0.3
- Webalizer 2.01
- pdf class 009e
- ncurses 5.8
- mod_perl 2.0.2
- FreeTDS 0.63
- gettext 0.11.5
- IMAP C-Client 2004e
- OpenLDAP (client) 2.3.11
- mcrypt 2.5.7
- mhash 0.8.18
- eAccelerator 0.9.5.2
- cURL 7.17.1
- libxslt 1.1.8
- phpSQLiteAdmin 0.2
- libapreq 2.08
- FPDF 1.53
- XAMPP Control Panel 0.6
35
Installation and Upgrades / Apache
« on: February 22, 2008, 12:32:58 pm »
I have another machine which is a web server with suse 10.3 + lampp + moodle + phpnuke + wordpress + mediawiki.
Is it possible to use the ebox machine to work with all this??
All these sites are accessible from the outside and from the LAN. (we are a school)
For this I would need apache, php, mysql, right?
Is it possible to use the ebox machine to work with all this??
All these sites are accessible from the outside and from the LAN. (we are a school)
For this I would need apache, php, mysql, right?
36
Installation and Upgrades / Re: How to create multiple users accounts?
« on: February 22, 2008, 11:23:29 am »
It worked!!! 
37
Installation and Upgrades / Re: dhcp server for TFTP + PXE + syslinux + G4L
« on: February 22, 2008, 11:05:51 am »
I get this error!!! 
Code: [Select]
debian:~# apt-get install ebox
A Ler Listas de Pacotes... Pronto
Construindo �rvore de Depend�ncias... Pronto
ebox j� � a vers�o mais recente.
0 pacotes actualizados, 0 pacotes novos instalados, 0 a remover e 9 n�o actualizados.
1 pacotes n�o totalmente instalados ou removidos.
� necess�rio fazer o download de 0B de arquivos.
Depois descompactar, 0B adicionais de espa�o em disco ser�o utilizados.
A instalar ebox-control-center (0.11) ...
update-rc.d: /etc/init.d/apache-soap exists during rc.d purge (continuing)
Removing any system startup links for /etc/init.d/apache-soap ...
/etc/rc0.d/K20apache-soap
/etc/rc1.d/K20apache-soap
/etc/rc2.d/S20apache-soap
/etc/rc3.d/S20apache-soap
/etc/rc4.d/S20apache-soap
/etc/rc5.d/S20apache-soap
/etc/rc6.d/K20apache-soap
Adding system startup for /etc/init.d/apache-soap ...
/etc/rc0.d/K20apache-soap -> ../init.d/apache-soap
/etc/rc1.d/K20apache-soap -> ../init.d/apache-soap
/etc/rc6.d/K20apache-soap -> ../init.d/apache-soap
/etc/rc2.d/S20apache-soap -> ../init.d/apache-soap
/etc/rc3.d/S20apache-soap -> ../init.d/apache-soap
/etc/rc4.d/S20apache-soap -> ../init.d/apache-soap
/etc/rc5.d/S20apache-soap -> ../init.d/apache-soap
createControlCenter.pl [--days=daysToExpire] [--on=organizationName] [--vpnproto=vpnProtocol] [--vpnport=vpnPort] [--soapport=soapPort] [--conf=OpenSSLConfFile] [--usage|help] publicIP vpnAddress
Where days: the number of days until the Certification Authority is valid
on: the name of the organization which CA has
vpnproto: the protocol will OpenVPN go (Options: tcp or udp) Default: udp
vpnport: the port where OpenVPN server will be listening to. Default: 1194
soapport: the port where Apache SOAP Web server will be listening to. Default: 4430
conf: the path to the OpenSSL configuration file
usage: print this help
publicIP: IP address (x.x.x.x) which eBox will connect to
vpnAddress: VPN address (x.x.x.x/xx) which eBox and the control center will be communicating each other
dpkg: erro ao processar ebox-control-center (--configure):
subprocesso post-installation script retornou erro do status de sa�da 1
Foram encontrados erros enquanto processava:
ebox-control-center
E: Sub-process /usr/bin/dpkg returned an error code (1)
debian:~# Code: [Select]
Command output: Reading Package Lists...
Building Dependency Tree...
bind9 is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 9 not upgraded.
1 not fully installed or removed.
Need to get 0B of archives.
After unpacking 0B of additional disk space will be used.
Setting up ebox-control-center (0.11) ...
.
Exit value: 100
2008/02/22 10:17:02 WARN> Union.pm:46 EBox::Types::Union::new - Union type cannot be optional. To use the non-defined value, choose EBox::Types::Union::Text
2008/02/22 10:17:02 WARN> Select.pm:50 EBox::Types::Select::new - Select decision should be editable. If you want a read only field, use text type instead.
2008/02/22 10:17:02 WARN> Select.pm:50 EBox::Types::Select::new - Select decision should be editable. If you want a read only field, use text type instead.
2008/02/22 10:17:02 WARN> Select.pm:50 EBox::Types::Select::new - Select decision should be editable. If you want a read only field, use text type instead.
2008/02/22 10:17:02 WARN> Select.pm:50 EBox::Types::Select::new - Select decision should be editable. If you want a read only field, use text type instead.
2008/02/22 10:17:02 WARN> Select.pm:50 EBox::Types::Select::new - Select decision should be editable. If you want a read only field, use text type instead.
2008/02/22 10:17:03 WARN> Abstract.pm:49 EBox::Types::Abstract::new - Defined default value to an optional field custom_ns
2008/02/22 10:17:03 WARN> Abstract.pm:49 EBox::Types::Abstract::new - Defined default value to an optional field default_leased_time
2008/02/22 10:17:03 WARN> Abstract.pm:49 EBox::Types::Abstract::new - Defined default value to an optional field max_leased_time
2008/02/22 10:17:03 WARN> Abstract.pm:49 EBox::Types::Abstract::new - Defined default value to an optional field guaranteed_rate
2008/02/22 10:17:03 WARN> Abstract.pm:49 EBox::Types::Abstract::new - Defined default value to an optional field limited_rate
2008/02/22 10:17:03 WARN> PortRange.pm:68 EBox::Types::PortRange::new - PortRange type cannot be optional. You should select 'any' value
2008/02/22 10:17:03 WARN> PortRange.pm:68 EBox::Types::PortRange::new - PortRange type cannot be optional. You should select 'any' value
2008/02/22 10:17:03 DEBUG> LogFiltering.pm:70 EBox::Events::Model::Watcher::LogFiltering::new - Missing argument: tableInfo
2008/02/22 10:17:03 WARN> Events.pm:591 EBox::Events::__ANON__ - model EBox::Events::Model::Watcher::LogFiltering cannot be instantiated
2008/02/22 10:17:03 DEBUG> ModelManager.pm:344 EBox::Model::ModelManager::modelActionTaken - ConfigureLogTable has taken action 'add' on row conf3473
2008/02/22 10:17:03 DEBUG> CompositeManager.pm:248 EBox::Model::CompositeManager::modelActionTaken - ConfigureLogTable has taken action 'add' on row conf3473
2008/02/22 10:21:32 WARN> Select.pm:50 EBox::Types::Select::new - Select decision should be editable. If you want a read only field, use text type instead.
2008/02/22 10:21:32 WARN> Select.pm:50 EBox::Types::Select::new - Select decision should be editable. If you want a read only field, use text type instead.
2008/02/22 10:21:32 WARN> Select.pm:50 EBox::Types::Select::new - Select decision should be editable. If you want a read only field, use text type instead.
2008/02/22 10:21:32 WARN> Select.pm:50 EBox::Types::Select::new - Select decision should be editable. If you want a read only field, use text type instead.
2008/02/22 10:21:32 WARN> Select.pm:50 EBox::Types::Select::new - Select decision should be editable. If you want a read only field, use text type instead.
2008/02/22 10:21:32 WARN> Abstract.pm:49 EBox::Types::Abstract::new - Defined default value to an optional field custom_ns
2008/02/22 10:21:32 WARN> Abstract.pm:49 EBox::Types::Abstract::new - Defined default value to an optional field default_leased_time
2008/02/22 10:21:32 WARN> Abstract.pm:49 EBox::Types::Abstract::new - Defined default value to an optional field max_leased_time
2008/02/22 10:21:32 WARN> Abstract.pm:49 EBox::Types::Abstract::new - Defined default value to an optional field guaranteed_rate
2008/02/22 10:21:32 WARN> Abstract.pm:49 EBox::Types::Abstract::new - Defined default value to an optional field limited_rate
2008/02/22 10:21:32 WARN> PortRange.pm:68 EBox::Types::PortRange::new - PortRange type cannot be optional. You should select 'any' value
2008/02/22 10:21:32 WARN> PortRange.pm:68 EBox::Types::PortRange::new - PortRange type cannot be optional. You should select 'any' value
2008/02/22 10:21:32 DEBUG> LogFiltering.pm:70 EBox::Events::Model::Watcher::LogFiltering::new - Missing argument: tableInfo
2008/02/22 10:21:32 WARN> Events.pm:591 EBox::Events::__ANON__ - model EBox::Events::Model::Watcher::LogFiltering cannot be instantiated
2008/02/22 10:21:33 DEBUG> Run.pm:84 EBox::CGI::Run::run - EBox::CGI::Users::View::Users mapped to Controller/Viewer CGI
2008/02/22 10:21:33 DEBUG> DataTable.pm:2113 EBox::Model::DataTable::pages - nrows 64
2008/02/22 10:22:13 DEBUG> Run.pm:84 EBox::CGI::Run::run - EBox::CGI::Users::View::Users mapped to Controller/Viewer CGI
2008/02/22 10:22:15 DEBUG> DataTable.pm:2113 EBox::Model::DataTable::pages - nrows 121
2008/02/22 10:22:32 DEBUG> Run.pm:84 EBox::CGI::Run::run - EBox::CGI::Users::Controller::Users mapped to Controller/Viewer CGI
2008/02/22 10:22:34 DEBUG> DataTable.pm:2113 EBox::Model::DataTable::pages - nrows 142
2008/02/22 10:41:40 DEBUG> Run.pm:84 EBox::CGI::Run::run - EBox::CGI::Users::View::Users mapped to Controller/Viewer CGI
2008/02/22 10:41:54 DEBUG> DataTable.pm:2113 EBox::Model::DataTable::pages - nrows 652
2008/02/22 10:45:23 DEBUG> Run.pm:84 EBox::CGI::Run::run - EBox::CGI::Users::Controller::Users mapped to Controller/Viewer CGI
2008/02/22 10:45:37 DEBUG> DataTable.pm:2113 EBox::Model::DataTable::pages - nrows 774
2008/02/22 10:45:42 DEBUG> Run.pm:84 EBox::CGI::Run::run - EBox::CGI::Users::Controller::Users mapped to Controller/Viewer CGI
2008/02/22 10:46:04 DEBUG> DataTable.pm:2113 EBox::Model::DataTable::pages - nrows 774
2008/02/22 10:47:33 ERROR> Sudo.pm:185 EBox::Sudo::_rootError - root command apt-get -qq -s install ebox-control-center | grep ^Inst | cut -d' ' -f 2 | grep ^ebox failed.
Error output:
Command output: .
Exit value: 1
2008/02/22 10:47:33 ERROR> Base.pm:320 EBox::CGI::Base::__ANON__ - no value sent for required parameter 'action'
Stack:
[(eval 3337):21]
[/usr/share/perl5/HTML/Mason/Component.pm:134]
[/usr/share/perl5/HTML/Mason/Request.pm:1074]
[/usr/share/perl5/HTML/Mason/Request.pm:1068]
[/usr/share/perl5/HTML/Mason/Request.pm:340]
[/usr/share/perl5/HTML/Mason/Request.pm:340]
[/usr/share/perl5/HTML/Mason/Request.pm:297]
[/usr/share/perl5/HTML/Mason/Interp.pm:207]
[/usr/share/perl5/EBox/CGI/Base.pm:133]
[/usr/share/perl5/EBox/CGI/Base.pm:172]
[/usr/share/perl5/EBox/CGI/Base.pm:309]
[/usr/share/perl5/Error.pm:380]
[/usr/share/perl5/Error.pm:372]
[/usr/share/perl5/EBox/CGI/Base.pm:335]
[/usr/share/perl5/EBox/CGI/Run.pm:92]
[/usr/share/ebox/cgi/ebox.cgi:14]
[/usr/share/perl5/Error.pm:380]
[/usr/share/perl5/Error.pm:372]
[/usr/share/ebox/cgi/ebox.cgi:32]
[/usr/lib/perl5/Apache/Registry.pm:149]
[/usr/lib/perl5/Apache/Registry.pm:149]
[/dev/null:0]
[/dev/null:0]
38
Installation and Upgrades / Re: Add-On - Apache
« on: February 19, 2008, 10:20:43 am »
Is it possible to install Xampp in ebox in order to host a web site?
39
Installation and Upgrades / Re: dhcp server for TFTP + PXE + syslinux + G4L
« on: February 19, 2008, 10:15:39 am »
What if I'm using ebox 1.10?
Should I do an upgrade before proceeding?
How do I upgrade ebox?
Should I do an upgrade before proceeding?
How do I upgrade ebox?
40
Installation and Upgrades / Re: How to create multiple users accounts?
« on: January 28, 2008, 12:54:14 pm »
What if I want to be able to put the users in a group when I'm creating them?
What changes do I have to make in the script so that it will put the user in its group?
Must i create groups previously?
What changes do I have to make in the script so that it will put the user in its group?
Must i create groups previously?
41
Installation and Upgrades / ltsp
« on: January 15, 2008, 07:24:59 pm »
I wonder if I could use the Ebox machine as a LTSP server!
Can it be done?
Can it be done?
42
Installation and Upgrades / Re: Add-On: BackupPC request.
« on: January 14, 2008, 08:19:05 pm »
I also feel this is a very good addon to Ebox.
43
Installation and Upgrades / user pwd
« on: December 28, 2007, 12:37:40 pm »
Hi!
I want to know if there is a way of letting the users choose their passwords the first time they login!
I would create the users account with a password and in the first login they would change it!
Is this possible?
Another question: i want to use ebox in a school. My users are students and teachers. The students are organized into classes. My idea is to group users according to classes. Will the folders reflect this organization? I don't want to search for students to be able to copy an exam, for instance! I want to go to a folder where all that class students are.
I want to know if there is a way of letting the users choose their passwords the first time they login!
I would create the users account with a password and in the first login they would change it!
Is this possible?
Another question: i want to use ebox in a school. My users are students and teachers. The students are organized into classes. My idea is to group users according to classes. Will the folders reflect this organization? I don't want to search for students to be able to copy an exam, for instance! I want to go to a folder where all that class students are.
44
Installation and Upgrades / Home access
« on: December 19, 2007, 03:29:05 pm »
I'm using Ebox in a school and I wander if it's possible to configure it to enable home access to user folders.