Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
166
Installation and Upgrades / Re: Need to install 3.2 - any way to do that?
« on: October 25, 2021, 10:32:55 am »
Hello,
Try the following repositories:
* https://gist.github.com/ivomts/4558134#gistcomment-3820552
--
“This world is ours, and by the Holy Light we will keep it safe, now and forever".
Try the following repositories:
* https://gist.github.com/ivomts/4558134#gistcomment-3820552
--
“This world is ours, and by the Holy Light we will keep it safe, now and forever".
167
Installation and Upgrades / Re: Issue with zentyal
« on: October 20, 2021, 04:19:49 pm »
Hi,
I recommend you to generate a system report and analyze it very careful, specially, the Domain Controller part.
Also, did you analyze the following log files:
* /var/log/syslog
* /var/log/zentyal/zentyal.log
Hope it helps you.
--
“This world is ours, and by the Holy Light we will keep it safe, now and forever".
I recommend you to generate a system report and analyze it very careful, specially, the Domain Controller part.
Code: [Select]
/usr/share/zentyal/smart-admin-report
Also, did you analyze the following log files:
* /var/log/syslog
* /var/log/zentyal/zentyal.log
Hope it helps you.
--
“This world is ours, and by the Holy Light we will keep it safe, now and forever".
168
Other modules / Re: Zentyal 6.2
« on: October 20, 2021, 04:16:44 pm »
Hi,
You could try to reconfigure your DLZ back-end as the below link explains:
* https://wiki.samba.org/index.php/BIND9_DLZ_DNS_Back_End#Reconfiguring_the_BIND9_DLZ_Back_End
If that doesn't fix the issue, paste me the result of the following commands:
Also, did you analyze the following log files?
* /var/log/syslog
* /var/log/zentyal/zentyal.log
Hope it helps you.
--
“This world is ours, and by the Holy Light we will keep it safe, now and forever".
You could try to reconfigure your DLZ back-end as the below link explains:
* https://wiki.samba.org/index.php/BIND9_DLZ_DNS_Back_End#Reconfiguring_the_BIND9_DLZ_Back_End
If that doesn't fix the issue, paste me the result of the following commands:
Code: [Select]
ls -lad /var/lib/samba/
ls -la /var/lib/samba/
Also, did you analyze the following log files?
* /var/log/syslog
* /var/log/zentyal/zentyal.log
Hope it helps you.
--
“This world is ours, and by the Holy Light we will keep it safe, now and forever".
169
Other modules / Re: IPV6 support via web interface and configuration of DNS and DHCPv6
« on: October 20, 2021, 04:09:36 pm »
Hi,
There is an old open issue in Github about IPv6, however, at this moment, Zentyal does not support it.
* https://github.com/zentyal/zentyal/issues/2018
--
“This world is ours, and by the Holy Light we will keep it safe, now and forever".
There is an old open issue in Github about IPv6, however, at this moment, Zentyal does not support it.
* https://github.com/zentyal/zentyal/issues/2018
--
“This world is ours, and by the Holy Light we will keep it safe, now and forever".
170
Email and Groupware / Re: Changing ActiveSync port
« on: October 15, 2021, 02:00:34 pm »
Hi,
I didn't change it but I suppose that you just need to be aware of the stub 'SOGo.conf-apache.mas'.
---
“This world is ours, and by the Holy Light we will keep it safe, now and forever".
I didn't change it but I suppose that you just need to be aware of the stub 'SOGo.conf-apache.mas'.
---
“This world is ours, and by the Holy Light we will keep it safe, now and forever".
171
Directory and Authentication / Re: The following modules failed while saving... :SAMBA (additional domain)
« on: October 01, 2021, 10:57:57 am »
Hi,
Did you try to configure each module after the initial wizard instead of let the wizard configures the modules? I mean:
1. Download the script.
2. Install just the firewall module.
3. In the initial wizard, just configure the Network module.
4. Install the DNS and Domain Controller modules.
5. Configure the DNS module (including a record 'A' for the Windows Servers) and enable it.
6. Check out the connection between both servers.
7. Finally, configure the Domain Controller module and enable it.
Hope it helps.
--
“This world is ours, and by the Holy Light we will keep it safe, now and forever".
Did you try to configure each module after the initial wizard instead of let the wizard configures the modules? I mean:
1. Download the script.
2. Install just the firewall module.
3. In the initial wizard, just configure the Network module.
4. Install the DNS and Domain Controller modules.
5. Configure the DNS module (including a record 'A' for the Windows Servers) and enable it.
6. Check out the connection between both servers.
7. Finally, configure the Domain Controller module and enable it.
Hope it helps.
--
“This world is ours, and by the Holy Light we will keep it safe, now and forever".
172
Directory and Authentication / Re: Two domain controllers, sysvol replication and idmap.ldb
« on: September 27, 2021, 10:29:39 am »
Hi,
There is an script located at '/usr/share/zentyal/smart-admin-report' that checks the status of a Zentyal, that script contains a function called 'dc_check' that do several checks in the Domain Controller module, perhaps you should run the script in both Zentyal and check the results.
Also, there is a command 'samba-tool showrepl' that you should run in both servers in order to check the replication status.
Finally, did you analyze the log files in both servers? Perhaps, the replication has some kind of issue.
---
“This world is ours, and by the Holy Light we will keep it safe, now and forever".
There is an script located at '/usr/share/zentyal/smart-admin-report' that checks the status of a Zentyal, that script contains a function called 'dc_check' that do several checks in the Domain Controller module, perhaps you should run the script in both Zentyal and check the results.
Also, there is a command 'samba-tool showrepl' that you should run in both servers in order to check the replication status.
Finally, did you analyze the log files in both servers? Perhaps, the replication has some kind of issue.
---
“This world is ours, and by the Holy Light we will keep it safe, now and forever".
173
Installation and Upgrades / Re: can't log in Webadmin
« on: September 27, 2021, 10:22:09 am »
In my case, I have created a cronjob that restarts the webadmin module each 6 hours. This 'fix' the behaviour for me. Below my cronjob code:
---
“This world is ours, and by the Holy Light we will keep it safe, now and forever".
Code: [Select]
## Workaround
## Added on: 15-09-2021
## Bug: https://github.com/zentyal/zentyal/issues/2055
0 */6 * * * /usr/bin/zs webadmin restart >/dev/null 2>&1
---
“This world is ours, and by the Holy Light we will keep it safe, now and forever".
174
Spanish / Re: Zentyal como DC y mikrotik como VPN pptp
« on: September 27, 2021, 10:18:02 am »
¿Es posible que estés experimentando el mismo error que el que reporta este usuario?
* https://forum.zentyal.org/index.php/topic,35274.msg114660.html#msg114660
* https://forum.zentyal.org/index.php/topic,35274.msg114660.html#msg114660
175
Spanish / Re: Zentyal como DC y mikrotik como VPN pptp
« on: September 27, 2021, 10:16:10 am »
Hola,
¿Qué tipo de configuración estás usando? ¿Qué problemas te está dando Zentyal? ¿Has analizado los archivos de log?
---
“This world is ours, and by the Holy Light we will keep it safe, now and forever".
¿Qué tipo de configuración estás usando? ¿Qué problemas te está dando Zentyal? ¿Has analizado los archivos de log?
---
“This world is ours, and by the Holy Light we will keep it safe, now and forever".
176
Spanish / Re: no obtengo respuestas del DNS desde la red wifi
« on: September 17, 2021, 01:31:22 pm »
Holap,
* ¿Tienes una regla en el cortafuegos que permita a la red de los clientes el acceso al servicio DNS?
* ¿Has probado en añadir una regla en el cortafuegos de tipo 'Registrar' para ver las peticiones que recibe Zentyal?
* ¿Has revisado los parámetros de configuración 'allow-' del archivo '/etc/bind/named.conf.options'?
---
“This world is ours, and by the Holy Light we will keep it safe, now and forever".
* ¿Tienes una regla en el cortafuegos que permita a la red de los clientes el acceso al servicio DNS?
* ¿Has probado en añadir una regla en el cortafuegos de tipo 'Registrar' para ver las peticiones que recibe Zentyal?
* ¿Has revisado los parámetros de configuración 'allow-' del archivo '/etc/bind/named.conf.options'?
---
“This world is ours, and by the Holy Light we will keep it safe, now and forever".
177
Other modules / Re: access to samba shares for sftp users
« on: September 17, 2021, 01:21:42 pm »
Hi,
Below you have the steps that I followed to access to the shares with a domain user through FTP:
1. Install the FTP module, disable the option 'Restrict to personal directories' and enable the module.
2. Through FileZilla, create a FTP connection using a 'Passive' transfer mode.
3. Connect to the FTP server, and then, just search for the path '/home/samba/shares'.
I also tested with SFTP, I enabled PAM and then, I could be able to connect to the shares through Filezilla. I think, this method requires steps 1 and 3 from above.
---
“This world is ours, and by the Holy Light we will keep it safe, now and forever".
Below you have the steps that I followed to access to the shares with a domain user through FTP:
1. Install the FTP module, disable the option 'Restrict to personal directories' and enable the module.
2. Through FileZilla, create a FTP connection using a 'Passive' transfer mode.
3. Connect to the FTP server, and then, just search for the path '/home/samba/shares'.
I also tested with SFTP, I enabled PAM and then, I could be able to connect to the shares through Filezilla. I think, this method requires steps 1 and 3 from above.
---
“This world is ours, and by the Holy Light we will keep it safe, now and forever".
178
Installation and Upgrades / Re: Stuck Upgrading from 5.1.3 to 6.0
« on: September 17, 2021, 01:03:57 pm »Any solutions? After restart my server get EBox::DNS::appArmorProfiles - Setting DNS apparmor profile and i cant run it
You can try to locate the DNS process, kill it and then, reconfigure the broken or pending packages. And then, restart again the module.
Code: [Select]
## To detect a process
ps -ef | egrep -i 'dns|zentyal'
lslocks | grep -Ei 'dns|zentyal'
## To kill the process
kill -9 pid_of_the_process
## To reconfigure the broken or pending packages
## It is possible that you need to run this
## command more than once
dpkg --configure -a
## Restarting the module
zs dns restart
---
“This world is ours, and by the Holy Light we will keep it safe, now and forever".
179
Spanish / Re: GeoIP Firewall
« on: September 15, 2021, 01:29:14 pm »
Holap,
Puedes tratar de combinar las siguientes herramientas y funcionalidades:
* Ipset:
* https://wiki.archlinux.org/title/Ipset_(Espa%C3%B1ol)
* Direcciones IP por paises:
* http://www.ipdeny.com/ipblocks/data/countries
* Iptables:
* https://wiki.archlinux.org/title/Iptables_(Espa%C3%B1ol)
* Hooks:
* https://doc.zentyal.org/es/appendix-c.html#hooks
---
“This world is ours, and by the Holy Light we will keep it safe, now and forever".
Puedes tratar de combinar las siguientes herramientas y funcionalidades:
* Ipset:
* https://wiki.archlinux.org/title/Ipset_(Espa%C3%B1ol)
* Direcciones IP por paises:
* http://www.ipdeny.com/ipblocks/data/countries
* Iptables:
* https://wiki.archlinux.org/title/Iptables_(Espa%C3%B1ol)
* Hooks:
* https://doc.zentyal.org/es/appendix-c.html#hooks
---
“This world is ours, and by the Holy Light we will keep it safe, now and forever".
180
Other modules / Re: How to configure ssh access to the Zentyal 7.0
« on: September 10, 2021, 04:38:25 pm »
According the output, your SSH service is using port 100. Did you modify the SSH service (Network -> Services) or created a new one with that particular port?
--
“This world is ours, and by the Holy Light we will keep it safe, now and forever"
--
“This world is ours, and by the Holy Light we will keep it safe, now and forever"