This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: 1 [2]
16
Installation and Upgrades / Firewall Blocking Passing Over an Acept Rule...
« on: April 08, 2013, 08:49:57 am »
I've a Zentyal Server with 2 networks:
eth0-LAN - Internal - Range 192.168.x:x
eth1-WAN - External connected to internet
I've 1 Internat Networks Rule in firewall:
Descision: Accept
Source: 192.168.2.201/32
Destination: Any
Service: Any
But if i look on firewall logs I found this:
Input Inferface: eth1
Output Inferface: eth1
Source: 192.168.2.201
Destination: 8.8.8.8
Source Port: 57498
Destination Port: 53
Action: DENY
I can't connect to any external service from 192.168.2.201 object.
I see in logs that Input Inferface & Output Inferface are the same "eth1" but i've connect de object 192.168.2.201 to "eth0" network.
Any suggestion
Thanks
eth0-LAN - Internal - Range 192.168.x:x
eth1-WAN - External connected to internet
I've 1 Internat Networks Rule in firewall:
Descision: Accept
Source: 192.168.2.201/32
Destination: Any
Service: Any
But if i look on firewall logs I found this:
Input Inferface: eth1
Output Inferface: eth1
Source: 192.168.2.201
Destination: 8.8.8.8
Source Port: 57498
Destination Port: 53
Action: DENY
I can't connect to any external service from 192.168.2.201 object.
I see in logs that Input Inferface & Output Inferface are the same "eth1" but i've connect de object 192.168.2.201 to "eth0" network.
Any suggestion
Thanks
17
Spanish / FIREWALL BLOQUEA SALTANDOSE LA REGLA DE PERMITIR...
« on: April 08, 2013, 08:40:44 am »
Tengo un Zentyal con 2 tarjetas de red:
eth0-LAN - Interna - Rango 192.168.x:x
eth1-WAN - Externa conectada a internet
Luego tengo 1 regla en las redes internas del cortafuegos:
Descisión: Aceptar
Origen: 192.168.2.201/32
Destino: Cualquiera
Servicio: Cualquiera
Sin embargo cuando voy a los registros del cortafuegos me encuentro por ejemplo con esto:
Interfaz Entrada: eth1
Interfaz Salida: eth1
Origen: 192.168.2.201
Destino: 8.8.8.8
Puerto origen: 57498
Puerto destino: 53
Decisión: DENEGAR
De esta manera no puedo navegar con el equipo, ni conectarme a ningún servicio.
Veo que en los registros se me identifica con interfaz de entrada "eth1" cuando verdaderamente tengo conectado el equipo a la "eth0"
¿Alguna idea?
Gracias
eth0-LAN - Interna - Rango 192.168.x:x
eth1-WAN - Externa conectada a internet
Luego tengo 1 regla en las redes internas del cortafuegos:
Descisión: Aceptar
Origen: 192.168.2.201/32
Destino: Cualquiera
Servicio: Cualquiera
Sin embargo cuando voy a los registros del cortafuegos me encuentro por ejemplo con esto:
Interfaz Entrada: eth1
Interfaz Salida: eth1
Origen: 192.168.2.201
Destino: 8.8.8.8
Puerto origen: 57498
Puerto destino: 53
Decisión: DENEGAR
De esta manera no puedo navegar con el equipo, ni conectarme a ningún servicio.
Veo que en los registros se me identifica con interfaz de entrada "eth1" cuando verdaderamente tengo conectado el equipo a la "eth0"
¿Alguna idea?
Gracias
18
Installation and Upgrades / HTTP-Proxy does not prompt username/password suddenly
« on: March 06, 2013, 09:42:15 am »
Good morning:
I have the following settings on my Zentyal server that controls access to Internet:
Zentyal 2.0.23
HttpProxy 2.0.8
Mode: NO Transparent
Politics: Authenticate and filter
These settings have been running for months, but in recent days the Proxy has stopped asking me the username/password for authentication and I get internet access without it.
Looking in Proxy logs all access are made without user.
I tried to uninstall the Proxy module and reinstall but didn't work for me.
Any idea why did this happen?
Solutions?
Thanks
I have the following settings on my Zentyal server that controls access to Internet:
Zentyal 2.0.23
HttpProxy 2.0.8
Mode: NO Transparent
Politics: Authenticate and filter
These settings have been running for months, but in recent days the Proxy has stopped asking me the username/password for authentication and I get internet access without it.
Looking in Proxy logs all access are made without user.
I tried to uninstall the Proxy module and reinstall but didn't work for me.
Any idea why did this happen?
Solutions?
Thanks
19
Spanish / HTTP-Proxy no solicita Usuario/Contraseña de repente
« on: March 06, 2013, 09:00:53 am »
Buenos días:
Tengo la siguiente configuración en mi equipo que controla el acceso a internet:
Esta configuración la he tenido durante meses funcionando, pero desde hace unos días el Proxy ha dejado de pedirme el usuario/contraseña para autentificarse y me dá acceso a internet si ello.
Mirando los LOGs del Proxy veo las peticiones de acceso sin usuario.
Probé a desintalar el modulo Proxy y volver a instalarlo pero nada.
¿Alguna idea de porque ha podido ocurrir?
¿Soluciones?
Gracias
Tengo la siguiente configuración en mi equipo que controla el acceso a internet:
- Zentyal 2.0.23
- HttpProxy 2.0.8
- Modo: NO Transparente
- Política: Autentificar y Filtar
Esta configuración la he tenido durante meses funcionando, pero desde hace unos días el Proxy ha dejado de pedirme el usuario/contraseña para autentificarse y me dá acceso a internet si ello.
Mirando los LOGs del Proxy veo las peticiones de acceso sin usuario.
Probé a desintalar el modulo Proxy y volver a instalarlo pero nada.
¿Alguna idea de porque ha podido ocurrir?
¿Soluciones?
Gracias
20
Installation and Upgrades / 25 users limitation in community version?
« on: March 01, 2013, 09:30:58 am »
Good morning:
I have a server with a 2.0.23 Zentyal basic/community subscription. It served the following services:
* Users and Group
* DHCP / DNS / NTP
* Firewall
* HTTP Proxy
* OpenVPN
The idea is to migrate Zentyal version 3.
My question is if the Basic subcripción/Community has limitation problems for more than 25 users.
Thanks
I have a server with a 2.0.23 Zentyal basic/community subscription. It served the following services:
* Users and Group
* DHCP / DNS / NTP
* Firewall
* HTTP Proxy
* OpenVPN
The idea is to migrate Zentyal version 3.
My question is if the Basic subcripción/Community has limitation problems for more than 25 users.
Thanks
21
Spanish / ¿Limitación 25 usuarios en versión community?
« on: March 01, 2013, 09:25:11 am »
Buenos días:
Tengo un servidor Zentyal 2.0.23 con una subscripción basica/community, que me sirve los siguientes servicios:
*Users and Group
*DHCP/DNS/NTP
*Firewall
*HTTP Proxy
*OpenVPN
La idea es migrar la versión Zentyal 3.
Mi duda es si con la subcripción Basica/Community voy a tener algún problema por tener más de 25 usuarios.
Salu2 y gracias
Tengo un servidor Zentyal 2.0.23 con una subscripción basica/community, que me sirve los siguientes servicios:
*Users and Group
*DHCP/DNS/NTP
*Firewall
*HTTP Proxy
*OpenVPN
La idea es migrar la versión Zentyal 3.
Mi duda es si con la subcripción Basica/Community voy a tener algún problema por tener más de 25 usuarios.
Salu2 y gracias
Pages: 1 [2]