Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
1
Spanish / Rendimiento...
« on: September 23, 2011, 11:50:27 am »
Hola:
Despues de usar un par de años zentyal he observado algunos problemas de velocidad en los siguientes casos:
- El interface de administración es extremadamente lento en ocasiones.
- En las conexiones para hacer un FTP, la conexión se va degradando y disminuyendo de velocidad (no sucede, por ejemplo en ClearOs).
- En general el equipo parece ir muy lento en ocasiones en comparación con otras distribuciones.
- He probado a virtualizarlo bajo XenSrver 5.6 SP2 y no lo hace mal, auqnue sería bueno tener una guía de virtualización.
Saludos.
Despues de usar un par de años zentyal he observado algunos problemas de velocidad en los siguientes casos:
- El interface de administración es extremadamente lento en ocasiones.
- En las conexiones para hacer un FTP, la conexión se va degradando y disminuyendo de velocidad (no sucede, por ejemplo en ClearOs).
- En general el equipo parece ir muy lento en ocasiones en comparación con otras distribuciones.
- He probado a virtualizarlo bajo XenSrver 5.6 SP2 y no lo hace mal, auqnue sería bueno tener una guía de virtualización.
Saludos.
3
Spanish / Port redirection BUG
« on: September 20, 2011, 11:59:19 am »
Hola:
Cuando al crear una redireccion de puertos se selecciona protocolo "ALL", crea una regla iptables MAL:
Crea una regla de redirigir TODOS los puertos entrantes a la IP que contenga la redirección, en vez de redirigir solo los protocolos.
Cuando al crear una redireccion de puertos se selecciona protocolo "ALL", crea una regla iptables MAL:
Crea una regla de redirigir TODOS los puertos entrantes a la IP que contenga la redirección, en vez de redirigir solo los protocolos.
4
Installation and Upgrades / Disable Unknown hosts
« on: March 01, 2011, 05:53:12 pm »
Hi:
I've registerd all tha machines as registry entries at Zentyal infrastructure DNS section.
Can i disallow access to the hosts NOT listed in DNS section?
Thanks.
I've registerd all tha machines as registry entries at Zentyal infrastructure DNS section.
Can i disallow access to the hosts NOT listed in DNS section?
Thanks.
5
Installation and Upgrades / Blinking screen in virtual machine
« on: December 22, 2010, 05:30:31 pm »
Hello:
I've installed Zentyal 2.02 under XenServer, using several templates.
After instaling i get a blinking screen, doing impossible completting installation (except connecting from remote firefox, that works fine).
I think it could be difficult to resolve this isue, but could be possible to chnage the screen mode or the xserver?
Best regards.
Any news about?
Any help with this issue?
I've installed Zentyal 2.02 under XenServer, using several templates.
After instaling i get a blinking screen, doing impossible completting installation (except connecting from remote firefox, that works fine).
I think it could be difficult to resolve this isue, but could be possible to chnage the screen mode or the xserver?
Best regards.
Any news about?
Any help with this issue?
6
Installation and Upgrades / Re: RADIUS autentication
« on: December 22, 2010, 04:49:32 pm »
It could be achieved:
- with a new configuration option allowing to create multiple points of RADIUS authentication (one for each group, for example).
- limiting at client time the group to autenticate (can it be done?)
What do you think about?
- with a new configuration option allowing to create multiple points of RADIUS authentication (one for each group, for example).
- limiting at client time the group to autenticate (can it be done?)
What do you think about?
7
Installation and Upgrades / Re: Change Role form STANDALONE to MASTER [SOLVED]
« on: December 15, 2010, 05:35:34 pm »
Thanks.
8
Installation and Upgrades / Re: VPN Finding and suggestion
« on: December 15, 2010, 05:30:04 pm »
I've tested the parameter and works.
I can use the same config bundle for multiple connections.
A checkbox for doing that should be an apreciated feature.
I can use the same config bundle for multiple connections.
A checkbox for doing that should be an apreciated feature.
9
Installation and Upgrades / Download user certificates
« on: December 15, 2010, 04:33:29 pm »
In some firewall distros like ClearOs, you can download the user certificates from the user corner.
Is there any way to download certificates users themselves?
Is there any way to download certificates users themselves?
10
Installation and Upgrades / RADIUS autentication
« on: December 15, 2010, 01:01:19 pm »
I have a Zentyal 2.0 with 4 groups created.
I have added 4 client for RADIUS authentication.
I'll like to limit the radius authentication in clients for accessing only to one of this groups (not to all of them).
Zentyal is configured in RADIUS to allow to ALL groups.
Can i limit the access from each Client to authenticate to one group anyway?
Thanks.
I have added 4 client for RADIUS authentication.
I'll like to limit the radius authentication in clients for accessing only to one of this groups (not to all of them).
Zentyal is configured in RADIUS to allow to ALL groups.
Can i limit the access from each Client to authenticate to one group anyway?
Thanks.
11
Installation and Upgrades / Change Role form STANDALONE to MASTER [SOLVED]
« on: December 15, 2010, 12:28:06 pm »
I have a Zentyal 2.0 instaled as STANDALONE.
Can i convert the server to become a MASTER server?
Is there a way to transform role or is needed a new install?
Thanks.
Can i convert the server to become a MASTER server?
Is there a way to transform role or is needed a new install?
Thanks.
12
Installation and Upgrades / HTTP Proxy two diferent sub-networks
« on: September 07, 2009, 01:58:52 pm »
Hi:
I have configured with ebox
- ETH0 to the Internet public IP
- ETH1 to a network in which I 192.168.0.X DHCP machines.
In the segment also ETH1 is a 192.168.1.x subnetwork
I would like the HTTP Proxy to serve both give sub-networks 192.168.0.X and 192.168.1X
I've tried but only addresses the eBox the 192.168.0.X.
Although i can see the eBox machine from the 192.168.1.x but eBox is not serving hhtp proxy request for this sub-network.
Any idea how to configure or tell eBox serving as a proxy for that subnet?
Note: In version 0.12 I did it without problems.
I have configured with ebox
- ETH0 to the Internet public IP
- ETH1 to a network in which I 192.168.0.X DHCP machines.
In the segment also ETH1 is a 192.168.1.x subnetwork
I would like the HTTP Proxy to serve both give sub-networks 192.168.0.X and 192.168.1X
I've tried but only addresses the eBox the 192.168.0.X.
Although i can see the eBox machine from the 192.168.1.x but eBox is not serving hhtp proxy request for this sub-network.
Any idea how to configure or tell eBox serving as a proxy for that subnet?
Note: In version 0.12 I did it without problems.
13
Spanish / Proxy HTTP varias Redes.
« on: September 04, 2009, 06:05:49 pm »
Hola:
Tengo ebox configurado con
- ETH0 a la IP publica de Internet
- ETH1 a una red 192.168.0.X en la que doy DHCP a maquinas.
En el segmento de ETH1 tambien hay una subred 192.168.1.X
Me gustaria que el Proxy HTTP diese servicio a las dos dubredes 192.168.0.X y 192.168.1X
Lo he probado pero el eBox solo atiende a las de la 192.168.0.X.
Aunque se puede ver la maquina de eBox desde la 192.168.1.X no las atiende.
Alguna idea de como configurar o decirle a eBox que escuche esa subred.
Nota: En la version 0.12 podia hacerlo sin problemas.
Tengo ebox configurado con
- ETH0 a la IP publica de Internet
- ETH1 a una red 192.168.0.X en la que doy DHCP a maquinas.
En el segmento de ETH1 tambien hay una subred 192.168.1.X
Me gustaria que el Proxy HTTP diese servicio a las dos dubredes 192.168.0.X y 192.168.1X
Lo he probado pero el eBox solo atiende a las de la 192.168.0.X.
Aunque se puede ver la maquina de eBox desde la 192.168.1.X no las atiende.
Alguna idea de como configurar o decirle a eBox que escuche esa subred.
Nota: En la version 0.12 podia hacerlo sin problemas.
Pages: [1]