This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
16
Directory and Authentication / Re: LDAP Authentication
« on: April 17, 2019, 01:02:28 pm »
For testing (when I setup my cloud), I created an LDAP User for the "LDAP Lookup" [can only "read" the LDAP].
Looking at your error message, you should add the credentials of an LDAP user that can do the lookup.
Or the problem is "splunkers" vs "neoscopio" ...
Regards
Thomas
Looking at your error message, you should add the credentials of an LDAP user that can do the lookup.
Or the problem is "splunkers" vs "neoscopio" ...
Regards
Thomas
17
Directory and Authentication / Re: LDAP Authentication
« on: April 15, 2019, 01:30:14 pm »
Hi,
I do not run OwnCloud, but Nextcloud...
There it looks like this:
CN=[User Name for Lookup],CN=Users(OU with users),DC=[Domainname],DC=[TLD]
BaseDN = DC=[Domainname],DC=[TLD]
() is for explanatuion
[] has to be adapted to the setup
Regards
Thomas
I do not run OwnCloud, but Nextcloud...
There it looks like this:
CN=[User Name for Lookup],CN=Users(OU with users),DC=[Domainname],DC=[TLD]
BaseDN = DC=[Domainname],DC=[TLD]
() is for explanatuion
[] has to be adapted to the setup
Regards
Thomas
18
Installation and Upgrades / Re: Unable to upgrade from 5.13. to 6
« on: April 11, 2019, 09:41:07 am »
;-) do not trust any GUI ;-)
what does apt or aptitude tell you about the jabber status?
what does apt or aptitude tell you about the jabber status?
19
German / Re: Problem bei der Einrichtung von Mail: The following modules failed while saving
« on: April 11, 2019, 09:30:36 am »
Sieht so aus, als ob kein Kerberos Ticket erstellt werden kann weil Username / Passwort falsch sind...
Evtl mal mit einem anderen User al dem "allmächtigen" nutzen? Wurde der Admin evtl umbenannt?
Gruß
Thomas
Evtl mal mit einem anderen User al dem "allmächtigen" nutzen? Wurde der Admin evtl umbenannt?
Gruß
Thomas
20
Installation and Upgrades / Re: Unable to upgrade from 5.13. to 6
« on: April 09, 2019, 11:28:32 am »
sorry, but regarding to the Logs you provided, it looks like a Jabber Problem...
Quote
grep: /var/log/ejabberd/error.log: No such file or directory
/usr/share/zentyal/release-upgrade: line 90: /etc/ejabberd/ejabberdctl.cfg: No such file or directory
21
Installation and Upgrades / Re: Unable to upgrade from 5.13. to 6
« on: April 08, 2019, 01:45:56 pm »
maybe Jabber blocks the upgrade?
could you try to uninstall Jabber, upgrade and afterwards reinstall Jabber?
Regards
Thomas
could you try to uninstall Jabber, upgrade and afterwards reinstall Jabber?
Regards
Thomas
22
Installation and Upgrades / Re: DNS Module error state: Unknown
« on: April 03, 2019, 11:25:02 am »
it is an AD user... (auto generated)
I thought it is visible in the management GUI, but I may be wrong... => then use dsa.msc to change...
I thought it is visible in the management GUI, but I may be wrong... => then use dsa.msc to change...
23
Installation and Upgrades / Re: DNS Module error state: Unknown
« on: April 02, 2019, 12:09:03 pm »
did you try to set the dns user to "do not expire"? (dsa.msc / WebGUI)
24
Email and Groupware / Re: Thunderbird can't connect to Zentyal 6.0, Login failed
« on: April 02, 2019, 12:07:19 pm »
If I remember right, the combination was StartTLS , "with password" (and secure port)
The Autodetect also does not work in my net, but adding it semi-manual helps ;-)
The Autodetect also does not work in my net, but adding it semi-manual helps ;-)
25
Installation and Upgrades / Re: Unable to upgrade from 5.13. to 6
« on: March 26, 2019, 12:31:08 pm »
could you please post the error message when doing it from CLI?
Did you check the logfiles?
/var/log/zentyal/zental.log and maybe /var/log/syslog
I beleive there is a hint why it is failing...
Regards
Thomas
Did you check the logfiles?
/var/log/zentyal/zental.log and maybe /var/log/syslog
I beleive there is a hint why it is failing...
Regards
Thomas
26
Email and Groupware / Re: Thunderbird can't connect to Zentyal 6.0, Login failed
« on: March 26, 2019, 12:27:24 pm »
Hi,
in my Network I have several PCs configured with Thunderbird...
What did you use as auth options? (plain Kerberos,...)?
I think the issue is in this options...
As I do not have access atm, I can only try to look after this in the evening :-(
Regards
Thomas
in my Network I have several PCs configured with Thunderbird...
What did you use as auth options? (plain Kerberos,...)?
I think the issue is in this options...
As I do not have access atm, I can only try to look after this in the evening :-(
Regards
Thomas
27
Email and Groupware / Re: Zentyal 5.0 moving mail to new server.
« on: February 18, 2019, 03:06:54 pm »
In Zentyal (Usermanagement) try to reassign the mailbox to the user...
Maybe there is an option to do this "for masses", I only had to do this for max 15 user...
Maybe there is an option to do this "for masses", I only had to do this for max 15 user...
28
Installation and Upgrades / Re: adc to pdc
« on: February 07, 2019, 12:24:34 pm »
... it would be helpful if you would post your "serious DNS Error-Message"...
maybe it is just a little setting in the DNS (forwarding)...
Regards
Thomas
maybe it is just a little setting in the DNS (forwarding)...
Regards
Thomas
29
German / Re: SSL-Zertifikate Best Practise
« on: February 05, 2019, 11:52:28 am »
Hi,
ich erinnere mich, dass es eine ziemlich gute Anleitung für Letsencrypt / Certbot gibt...
Hab aber grad nicht die Möglichkeit zu suchen :-(
Es musste in der (richtigen!) .mas (Config Datei von Zentyal) der Pfad zum Zertifikat angepasst werden...
Gruß
Thomas
ich erinnere mich, dass es eine ziemlich gute Anleitung für Letsencrypt / Certbot gibt...
Hab aber grad nicht die Möglichkeit zu suchen :-(
Es musste in der (richtigen!) .mas (Config Datei von Zentyal) der Pfad zum Zertifikat angepasst werden...
Gruß
Thomas
30
Installation and Upgrades / Re: Zentyal Webmin is loading & all services are unable to start
« on: January 17, 2019, 04:59:56 pm »
is there any hint in the syslog?
... would be helpful
Regards
Thomas
... would be helpful
Regards
Thomas