This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
1
Installation and Upgrades / problem with proxy network configuration installing zentyal 5.0
« on: March 15, 2017, 07:36:52 pm »
i downloaded the last zentyal 5.0 stable iso and installed it on a kvm virtual machine.
the installer does not properly configured the network.
my network is under a proxy but the installer didn't ask me anything about proxy settings.
the installer was stuck at apt configuration step.
i had to manually kill the running apt processes to be able to return to the debconf configuration main menu.
from there i manually reconfigured the network and i was able to successfully complete the installation process.
the installer does not properly configured the network.
my network is under a proxy but the installer didn't ask me anything about proxy settings.
the installer was stuck at apt configuration step.
i had to manually kill the running apt processes to be able to return to the debconf configuration main menu.
from there i manually reconfigured the network and i was able to successfully complete the installation process.
2
Installation and Upgrades / office package installation fails
« on: October 06, 2012, 01:00:36 pm »
i tried a fresh installation of zentyal 3.0
after the reboot, before configuring zentyal i updated the ubuntu system and rebooted, to install all the new zentyal package before the first zentyal configuration.
then i selected the office package.
during the wizard network setup i configured the PDC DNS server as nameserver for the zentyal box
the wizard automatically picked up my AD domain name (csc.it) and proposed it to me. i let this unchanged.
i've followed all the installation process, tailing /var/log/zentyal/zentyal.log and i will report it here at the end of the post, only from the office package starting point, because the forum limits the maximum post lenght to 20000 character; anyway i didn't found any error before that point.
Any suggestions?
------------
these are the zentyal package installed:
this is /var/log/zentyal/zentyal.log:
after the reboot, before configuring zentyal i updated the ubuntu system and rebooted, to install all the new zentyal package before the first zentyal configuration.
then i selected the office package.
during the wizard network setup i configured the PDC DNS server as nameserver for the zentyal box
the wizard automatically picked up my AD domain name (csc.it) and proposed it to me. i let this unchanged.
i've followed all the installation process, tailing /var/log/zentyal/zentyal.log and i will report it here at the end of the post, only from the office package starting point, because the forum limits the maximum post lenght to 20000 character; anyway i didn't found any error before that point.
Any suggestions?
------------
these are the zentyal package installed:
Code: [Select]
administrator@cscs:~$ dpkg -l | grep zentyal-
ii language-pack-zentyal-it 3.0.1 Zentyal translations for language Italian
ii zentyal-antivirus 3.0 Zentyal - Antivirus
ii zentyal-ca 3.0 Zentyal - Certification Authority
ii zentyal-common 3.0.2 Zentyal - Common Library
ii zentyal-core 3.0.3 Zentyal - Core
ii zentyal-dns 3.0 Zentyal - DNS Service
ii zentyal-ebackup 3.0 Zentyal - Backup
ii zentyal-firewall 3.0 Zentyal - Firewall
ii zentyal-monitor 3.0 Zentyal - Monitor
ii zentyal-network 3.0 Zentyal - Network Configuration
ii zentyal-ntp 3.0 Zentyal - NTP Service
ii zentyal-objects 3.0 Zentyal - Network Objects
ii zentyal-office 3.0 Zentyal - Office Suite
ii zentyal-openvpn 3.0 Zentyal - VPN Service
ii zentyal-printers 3.0 Zentyal - Printer Sharing Service
ii zentyal-remoteservices 3.0 Zentyal - Cloud Client
ii zentyal-samba 3.0 Zentyal - File Sharing and Domain Services
ii zentyal-services 3.0 Zentyal - Network Services
ii zentyal-software 3.0.1 Zentyal - Software Management
ii zentyal-users 3.0 Zentyal - Users and Groups
this is /var/log/zentyal/zentyal.log:
Code: [Select]
2012/10/06 11:35:50 INFO> install-packages:59 main::__ANON__ - Starting package installation process
2012/10/06 11:42:43 INFO> Base.pm:229 EBox::Module::Base::save - Restarting service for module: objects
2012/10/06 11:42:46 INFO> Base.pm:229 EBox::Module::Base::save - Restarting service for module: services
2012/10/06 11:42:53 INFO> Base.pm:251 EBox::Module::Base::__ANON__ - Saving config for module: network
2012/10/06 11:42:53 INFO> Base.pm:251 EBox::Module::Base::__ANON__ - Saving config for module: network
2012/10/06 11:42:54 INFO> Service.pm:716 EBox::Module::Service::restartService - Restarting service for module: network
2012/10/06 11:43:01 INFO> Base.pm:229 EBox::Module::Base::save - Restarting service for module: firewall
2012/10/06 11:43:03 INFO> Service.pm:716 EBox::Module::Service::restartService - Restarting service for module: firewall
2012/10/06 11:43:05 INFO> Base.pm:229 EBox::Module::Base::save - Restarting service for module: antivirus
2012/10/06 11:43:06 INFO> Base.pm:251 EBox::Module::Base::__ANON__ - Saving config for module: ca
2012/10/06 11:43:08 INFO> Service.pm:716 EBox::Module::Service::restartService - Restarting service for module: ca
2012/10/06 11:43:11 INFO> Base.pm:251 EBox::Module::Base::__ANON__ - Saving config for module: objects
2012/10/06 11:43:11 INFO> Base.pm:251 EBox::Module::Base::__ANON__ - Saving config for module: network
2012/10/06 11:43:11 INFO> Base.pm:251 EBox::Module::Base::__ANON__ - Saving config for module: services
2012/10/06 11:43:11 INFO> Base.pm:251 EBox::Module::Base::__ANON__ - Saving config for module: firewall
2012/10/06 11:43:12 INFO> Base.pm:251 EBox::Module::Base::__ANON__ - Saving config for module: dns
2012/10/06 11:43:13 INFO> Service.pm:716 EBox::Module::Service::restartService - Restarting service for module: dns
2012/10/06 11:43:16 INFO> Base.pm:229 EBox::Module::Base::save - Restarting service for module: ebackup
2012/10/06 11:43:18 INFO> Base.pm:229 EBox::Module::Base::save - Restarting service for module: monitor
2012/10/06 11:43:21 INFO> Base.pm:251 EBox::Module::Base::__ANON__ - Saving config for module: objects
2012/10/06 11:43:21 INFO> Base.pm:251 EBox::Module::Base::__ANON__ - Saving config for module: network
2012/10/06 11:43:21 INFO> Base.pm:251 EBox::Module::Base::__ANON__ - Saving config for module: services
2012/10/06 11:43:21 INFO> Base.pm:251 EBox::Module::Base::__ANON__ - Saving config for module: firewall
2012/10/06 11:43:21 INFO> Base.pm:251 EBox::Module::Base::__ANON__ - Saving config for module: ntp
2012/10/06 11:43:22 INFO> Service.pm:716 EBox::Module::Service::restartService - Restarting service for module: ntp
2012/10/06 11:43:55 INFO> Base.pm:251 EBox::Module::Base::__ANON__ - Saving config for module: openvpn
2012/10/06 11:43:56 INFO> Service.pm:716 EBox::Module::Service::restartService - Restarting service for module: openvpn
2012/10/06 11:44:01 INFO> Service.pm:716 EBox::Module::Service::restartService - Restarting service for module: remoteservices
2012/10/06 11:44:01 ERROR> Apache.pm:630 EBox::Apache::removeInclude - /var/lib/zentyal/conf/remoteservices/soap-loc.conf has not been included previously
2012/10/06 11:44:01 ERROR> RemoteServices.pm:1666 EBox::RemoteServices::_getSubscriptionDetails - Not subscribed
2012/10/06 11:44:01 ERROR> RemoteServices.pm:1666 EBox::RemoteServices::_getSubscriptionDetails - Not subscribed
2012/10/06 11:44:04 INFO> Base.pm:251 EBox::Module::Base::__ANON__ - Saving config for module: remoteservices
2012/10/06 11:44:09 INFO> Base.pm:251 EBox::Module::Base::__ANON__ - Saving config for module: objects
2012/10/06 11:44:09 INFO> Base.pm:251 EBox::Module::Base::__ANON__ - Saving config for module: network
2012/10/06 11:44:09 INFO> Base.pm:251 EBox::Module::Base::__ANON__ - Saving config for module: services
2012/10/06 11:44:09 INFO> Base.pm:251 EBox::Module::Base::__ANON__ - Saving config for module: firewall
2012/10/06 11:44:09 INFO> Base.pm:251 EBox::Module::Base::__ANON__ - Saving config for module: users
2012/10/06 11:44:11 INFO> Service.pm:716 EBox::Module::Service::restartService - Restarting service for module: users
2012/10/06 11:44:17 INFO> Base.pm:251 EBox::Module::Base::__ANON__ - Saving config for module: objects
2012/10/06 11:44:17 INFO> Base.pm:251 EBox::Module::Base::__ANON__ - Saving config for module: network
2012/10/06 11:44:17 INFO> Base.pm:251 EBox::Module::Base::__ANON__ - Saving config for module: services
2012/10/06 11:44:17 INFO> Base.pm:251 EBox::Module::Base::__ANON__ - Saving config for module: firewall
2012/10/06 11:44:17 INFO> Base.pm:251 EBox::Module::Base::__ANON__ - Saving config for module: samba
2012/10/06 11:44:19 INFO> Service.pm:716 EBox::Module::Service::restartService - Restarting service for module: samba
2012/10/06 11:44:22 INFO> Base.pm:251 EBox::Module::Base::__ANON__ - Saving config for module: services
2012/10/06 11:44:23 INFO> Base.pm:251 EBox::Module::Base::__ANON__ - Saving config for module: objects
2012/10/06 11:44:23 INFO> Base.pm:251 EBox::Module::Base::__ANON__ - Saving config for module: network
2012/10/06 11:44:23 INFO> Base.pm:251 EBox::Module::Base::__ANON__ - Saving config for module: services
2012/10/06 11:44:23 INFO> Base.pm:251 EBox::Module::Base::__ANON__ - Saving config for module: firewall
2012/10/06 11:44:23 INFO> Base.pm:251 EBox::Module::Base::__ANON__ - Saving config for module: objects
2012/10/06 11:44:23 INFO> Base.pm:251 EBox::Module::Base::__ANON__ - Saving config for module: network
2012/10/06 11:44:23 INFO> Base.pm:251 EBox::Module::Base::__ANON__ - Saving config for module: services
2012/10/06 11:44:23 INFO> Base.pm:251 EBox::Module::Base::__ANON__ - Saving config for module: firewall
2012/10/06 11:44:23 INFO> Base.pm:251 EBox::Module::Base::__ANON__ - Saving config for module: printers
2012/10/06 11:44:25 INFO> Service.pm:716 EBox::Module::Service::restartService - Restarting service for module: printers
2012/10/06 11:44:30 INFO> install-packages:119 main::__ANON__ - Package installation process finished
2012/10/06 11:46:07 INFO> Users.pm:42 EBox::CGI::UsersAndGroups::Wizard::Users::_processWizard - Setting the host domain
2012/10/06 11:46:24 INFO> GlobalImpl.pm:562 EBox::GlobalImpl::saveAllModules - First installation, enabling modules: network firewall antivirus apache audit ca dns ebackup events monitor ntp openvpn remoteservices users samba printers logs firewall
2012/10/06 11:46:24 INFO> GlobalImpl.pm:565 EBox::GlobalImpl::saveAllModules - Enabling module network
2012/10/06 11:46:24 INFO> GlobalImpl.pm:565 EBox::GlobalImpl::saveAllModules - Enabling module firewall
2012/10/06 11:46:24 INFO> GlobalImpl.pm:565 EBox::GlobalImpl::saveAllModules - Enabling module antivirus
2012/10/06 11:46:24 INFO> GlobalImpl.pm:565 EBox::GlobalImpl::saveAllModules - Enabling module apache
2012/10/06 11:46:24 INFO> GlobalImpl.pm:565 EBox::GlobalImpl::saveAllModules - Enabling module audit
2012/10/06 11:46:24 INFO> GlobalImpl.pm:565 EBox::GlobalImpl::saveAllModules - Enabling module ca
2012/10/06 11:46:24 INFO> GlobalImpl.pm:565 EBox::GlobalImpl::saveAllModules - Enabling module dns
2012/10/06 11:46:25 INFO> GlobalImpl.pm:565 EBox::GlobalImpl::saveAllModules - Enabling module ebackup
2012/10/06 11:46:25 INFO> GlobalImpl.pm:565 EBox::GlobalImpl::saveAllModules - Enabling module events
2012/10/06 11:46:25 INFO> GlobalImpl.pm:565 EBox::GlobalImpl::saveAllModules - Enabling module monitor
2012/10/06 11:46:26 INFO> GlobalImpl.pm:565 EBox::GlobalImpl::saveAllModules - Enabling module ntp
2012/10/06 11:46:26 INFO> GlobalImpl.pm:565 EBox::GlobalImpl::saveAllModules - Enabling module openvpn
2012/10/06 11:46:27 INFO> GlobalImpl.pm:565 EBox::GlobalImpl::saveAllModules - Enabling module remoteservices
2012/10/06 11:46:27 INFO> GlobalImpl.pm:565 EBox::GlobalImpl::saveAllModules - Enabling module users
2012/10/06 11:46:28 INFO> UsersAndGroups.pm:411 EBox::UsersAndGroups::_loadLDAP - Creating LDAP database...
2012/10/06 11:46:32 INFO> UsersAndGroups.pm:369 EBox::UsersAndGroups::enableActions - Performing first LDAP actions
2012/10/06 11:46:32 INFO> UsersAndGroups.pm:237 EBox::UsersAndGroups::setupKerberos - Initializing kerberos realm 'CSC.IT'
2012/10/06 11:46:34 INFO> UsersAndGroups.pm:257 EBox::UsersAndGroups::setupDNS - Setting up DNS
2012/10/06 11:47:03 INFO> GlobalImpl.pm:565 EBox::GlobalImpl::saveAllModules - Enabling module samba
2012/10/06 11:47:04 INFO> GlobalImpl.pm:565 EBox::GlobalImpl::saveAllModules - Enabling module printers
2012/10/06 11:47:05 INFO> GlobalImpl.pm:565 EBox::GlobalImpl::saveAllModules - Enabling module logs
2012/10/06 11:47:05 INFO> GlobalImpl.pm:565 EBox::GlobalImpl::saveAllModules - Enabling module firewall
2012/10/06 11:47:05 INFO> Base.pm:229 EBox::Module::Base::save - Restarting service for module: network
2012/10/06 11:47:09 INFO> Base.pm:229 EBox::Module::Base::save - Restarting service for module: firewall
2012/10/06 11:47:11 INFO> Base.pm:229 EBox::Module::Base::save - Restarting service for module: antivirus
2012/10/06 11:47:22 INFO> Base.pm:229 EBox::Module::Base::save - Restarting service for module: audit
2012/10/06 11:47:22 INFO> Base.pm:229 EBox::Module::Base::save - Restarting service for module: ca
2012/10/06 11:47:22 INFO> Base.pm:229 EBox::Module::Base::save - Restarting service for module: dns
2012/10/06 11:47:25 INFO> Base.pm:229 EBox::Module::Base::save - Restarting service for module: ebackup
2012/10/06 11:47:25 INFO> Base.pm:229 EBox::Module::Base::save - Restarting service for module: events
2012/10/06 11:47:26 INFO> Base.pm:229 EBox::Module::Base::save - Restarting service for module: monitor
2012/10/06 11:47:27 WARN> Monitor.pm:658 EBox::Monitor::_setThresholdConf - No threshold configuration is saved since monitor watcher or events module are not enabled
2012/10/06 11:47:29 INFO> Base.pm:229 EBox::Module::Base::save - Restarting service for module: ntp
2012/10/06 11:47:42 INFO> Base.pm:229 EBox::Module::Base::save - Restarting service for module: openvpn
2012/10/06 11:47:42 INFO> Base.pm:229 EBox::Module::Base::save - Restarting service for module: remoteservices
2012/10/06 11:47:42 ERROR> Apache.pm:630 EBox::Apache::removeInclude - /var/lib/zentyal/conf/remoteservices/soap-loc.conf has not been included previously
2012/10/06 11:47:42 ERROR> RemoteServices.pm:1666 EBox::RemoteServices::_getSubscriptionDetails - Not subscribed
2012/10/06 11:47:43 ERROR> RemoteServices.pm:1666 EBox::RemoteServices::_getSubscriptionDetails - Not subscribed
2012/10/06 11:47:45 INFO> Base.pm:229 EBox::Module::Base::save - Restarting service for module: users
2012/10/06 11:47:49 INFO> Base.pm:229 EBox::Module::Base::save - Restarting service for module: samba
2012/10/06 11:48:54 INFO> Base.pm:229 EBox::Module::Base::save - Restarting service for module: dns
2012/10/06 11:48:57 INFO> LDB.pm:379 EBox::LDB::ldapUsersToLdb - Loading Zentyal users into samba database
2012/10/06 11:48:57 INFO> LDB.pm:406 EBox::LDB::ldapGroupsToLdb - Loading Zentyal groups into samba database
2012/10/06 11:48:57 INFO> LDB.pm:444 EBox::LDB::ldapServicePrincipalsToLdb - Loading Zentyal service principals into samba database
2012/10/06 11:49:06 ERROR> Sudo.pm:233 EBox::Sudo::_rootError - root command echo 'dn: CN=S-1-5-21-3461235773-807821654-353009796-514
changetype: add
xidNumber:
objectSid: S-1-5-21-3461235773-807821654-353009796-514
objectClass: sidMap
type: ID_TYPE_UID
cn: S-1-5-21-3461235773-807821654-353009796-514
' | ldbmodify -H /var/lib/samba/private/idmap.ldb failed.
Error output: ERR: (Invalid attribute syntax) "Element xidNumber has empty attribute in ldb message (CN=S-1-5-21-3461235773-807821654-353009796-514)!" on DN CN=S-1-5-21-3461235773-807821654-353009796-514 at block before line 8
Command output: GENSEC backend 'gssapi_spnego' registered
GENSEC backend 'gssapi_krb5' registered
GENSEC backend 'gssapi_krb5_sasl' registered
GENSEC backend 'schannel' registered
GENSEC backend 'spnego' registered
GENSEC backend 'ntlmssp' registered
GENSEC backend 'krb5' registered
GENSEC backend 'fake_gssapi_krb5' registered
Modify failed after processing 0 records
.
Exit value: 21
2012/10/06 11:49:06 ERROR> GlobalImpl.pm:646 EBox::GlobalImpl::__ANON__ - Failed to save changes in module samba: root command echo 'dn: CN=S-1-5-21-3461235773-807821654-353009796-514
changetype: add
xidNumber:
objectSid: S-1-5-21-3461235773-807821654-353009796-514
objectClass: sidMap
type: ID_TYPE_UID
cn: S-1-5-21-3461235773-807821654-353009796-514
' | ldbmodify -H /var/lib/samba/private/idmap.ldb failed.
Error output: ERR: (Invalid attribute syntax) "Element xidNumber has empty attribute in ldb message (CN=S-1-5-21-3461235773-807821654-353009796-514)!" on DN CN=S-1-5-21-3461235773-807821654-353009796-514 at block before line 8
Command output: GENSEC backend 'gssapi_spnego' registered
GENSEC backend 'gssapi_krb5' registered
GENSEC backend 'gssapi_krb5_sasl' registered
GENSEC backend 'schannel' registered
GENSEC backend 'spnego' registered
GENSEC backend 'ntlmssp' registered
GENSEC backend 'krb5' registered
GENSEC backend 'fake_gssapi_krb5' registered
Modify failed after processing 0 records
.
Exit value: 21
2012/10/06 11:49:06 INFO> Base.pm:229 EBox::Module::Base::save - Restarting service for module: printers
2012/10/06 11:49:08 INFO> Base.pm:229 EBox::Module::Base::save - Restarting service for module: logs
2012/10/06 11:49:08 INFO> Base.pm:229 EBox::Module::Base::save - Restarting service for module: firewall
2012/10/06 11:49:11 INFO> Base.pm:229 EBox::Module::Base::save - Restarting service for module: sysinfo
2012/10/06 11:49:11 INFO> GlobalImpl.pm:656 EBox::GlobalImpl::saveAllModules - Saving configuration: apache
2012/10/06 11:49:11 INFO> Base.pm:229 EBox::Module::Base::save - Restarting service for module: apache
2012/10/06 11:49:12 ERROR> RemoteServices.pm:1666 EBox::RemoteServices::_getSubscriptionDetails - Not subscribed
2012/10/06 11:49:13 INFO> Base.pm:251 EBox::Module::Base::__ANON__ - Saving config for module: services
2012/10/06 11:49:13 INFO> Base.pm:251 EBox::Module::Base::__ANON__ - Saving config for module: objects
2012/10/06 11:49:13 INFO> Base.pm:251 EBox::Module::Base::__ANON__ - Saving config for module: network
2012/10/06 11:49:13 INFO> Base.pm:251 EBox::Module::Base::__ANON__ - Saving config for module: services
2012/10/06 11:49:13 INFO> Base.pm:251 EBox::Module::Base::__ANON__ - Saving config for module: firewall
2012/10/06 11:49:14 INFO> Base.pm:251 EBox::Module::Base::__ANON__ - Saving config for module: objects
2012/10/06 11:49:14 INFO> Base.pm:251 EBox::Module::Base::__ANON__ - Saving config for module: network
2012/10/06 11:49:14 INFO> Base.pm:251 EBox::Module::Base::__ANON__ - Saving config for module: services
2012/10/06 11:49:14 INFO> Base.pm:251 EBox::Module::Base::__ANON__ - Saving config for module: firewall
2012/10/06 11:49:14 ERROR> GlobalImpl.pm:703 EBox::GlobalImpl::saveAllModules - The following modules failed while saving their changes, their state is unknown: samba
3
Installation and Upgrades / Problems adding zentyal as additional domain controller
« on: October 05, 2012, 06:14:32 pm »
i'm using zentyal 3.0
i've encountered a lot of problem, because the documentation is not so clear, so if there is some 'step by step' how-to or tutorial around here, pleas let me know, i was unable to found more information.
anyway, these are the steps i followed, trying to figure what to do, reading /var/log/zentyal/zentyal.log (and the other logs)
i started with a base zentyal install, this is the list of the installed zentyal packages before samba installation
my AD domainis is dc=csc,dc=it
my domain controller is cscs1.csc.it
the zentyal box name is cscs.csc.it
the zentyal ldap configuration is:
in the DNS module settings i configured my PDC ip address as DNS forwarder and i mapped the PDC ip address 192.168.153.200 to hosts list in 'csc.it' domain.
doing this i managed to install the "File Sharing and Domain Services" module without errors.
then i configured the file sharing setting with this data:
Server Role: Additiona Domain Controller
Realm: CSC.IT
Domain controller FQDN: cscs1.csc.it
Domain DNS server IP: 192.168.153.200
Administrator account: administrator
Administrator password: **********
NetBIOS domain name: CSC
NetBIOS computer name: cscs
Server description: Zentyal File Server
at this point i was able to query the PDC ldap server with this command:
ldapsearch -H ldap://cscs1.csc.it -b dc=csc,dc=it -x
but if i try to activate the file sharing module i receive this error from the web interface:
and from the zentyal.log file i read this:
i tryed to query the ldap server with my credential, but this raised this error:
i goggled to found that is error is due to a missing library, so i installed libsasl2-modules-gssapi-heimdal
after this, trying to query the AD i get this is the error:
it seems that kerberos is not inizialized:
i'm not a kerberos or ldap expert, so at this point, to not interfer with zentyal packages management i prefer to stop my debug work and i hope in some help from the community to solve my problems
many thanks... and... sorry for my bad english ;-)
Max
i've encountered a lot of problem, because the documentation is not so clear, so if there is some 'step by step' how-to or tutorial around here, pleas let me know, i was unable to found more information.
anyway, these are the steps i followed, trying to figure what to do, reading /var/log/zentyal/zentyal.log (and the other logs)
i started with a base zentyal install, this is the list of the installed zentyal packages before samba installation
Code: [Select]
ii language-pack-zentyal-it 3.0.1 Zentyal translations for language Italian
ii zentyal-ca 3.0 Zentyal - Certification Authority
ii zentyal-common 3.0.2 Zentyal - Common Library
ii zentyal-core 3.0.3 Zentyal - Core
ii zentyal-dns 3.0 Zentyal - DNS Service
ii zentyal-firewall 3.0 Zentyal - Firewall
ii zentyal-network 3.0 Zentyal - Network Configuration
ii zentyal-ntp 3.0 Zentyal - NTP Service
ii zentyal-objects 3.0 Zentyal - Network Objects
ii zentyal-services 3.0 Zentyal - Network Services
ii zentyal-software 3.0.1 Zentyal - Software Management
ii zentyal-users 3.0.2 Zentyal - Users and Groups
my AD domainis is dc=csc,dc=it
my domain controller is cscs1.csc.it
the zentyal box name is cscs.csc.it
the zentyal ldap configuration is:
Code: [Select]
DN base: dc=csc,dc=it
DN root: cn=zentyal,dc=csc,dc=it
Password: -omitted-
DN utenti: ou=Users,dc=csc,dc=it
DN gruppi: ou=Groups,dc=csc,dc=it
in the DNS module settings i configured my PDC ip address as DNS forwarder and i mapped the PDC ip address 192.168.153.200 to hosts list in 'csc.it' domain.
doing this i managed to install the "File Sharing and Domain Services" module without errors.
then i configured the file sharing setting with this data:
Server Role: Additiona Domain Controller
Realm: CSC.IT
Domain controller FQDN: cscs1.csc.it
Domain DNS server IP: 192.168.153.200
Administrator account: administrator
Administrator password: **********
NetBIOS domain name: CSC
NetBIOS computer name: cscs
Server description: Zentyal File Server
at this point i was able to query the PDC ldap server with this command:
ldapsearch -H ldap://cscs1.csc.it -b dc=csc,dc=it -x
but if i try to activate the file sharing module i receive this error from the web interface:
Code: [Select]
The following modules failed while saving their changes, their state is unknown: samba
and from the zentyal.log file i read this:
Code: [Select]
2012/10/05 16:04:54 INFO> GlobalImpl.pm:608 EBox::GlobalImpl::saveAllModules - Saving config and restarting services: firewall samba dns logs
2012/10/05 16:04:54 INFO> Base.pm:229 EBox::Module::Base::save - Restarting service for module: firewall
2012/10/05 16:04:55 INFO> Base.pm:229 EBox::Module::Base::save - Restarting service for module: dns
2012/10/05 16:04:56 WARN> DNS.pm:1762 EBox::DNS::switchToReverseInfoData - Domain 'csc.it' already mapped to IP group '153.168.192', domain csc.it skipped
2012/10/05 16:04:58 INFO> Base.pm:229 EBox::Module::Base::save - Restarting service for module: logs
2012/10/05 16:04:58 INFO> GlobalImpl.pm:692 EBox::GlobalImpl::saveAllModules - Changes saved successfully
2012/10/05 16:05:13 INFO> Samba.pm:323 EBox::Samba::enableActions - Setting up filesystem
2012/10/05 16:05:14 INFO> Samba.pm:340 EBox::Samba::enableActions - Creating directories
2012/10/05 16:05:26 INFO> GlobalImpl.pm:608 EBox::GlobalImpl::saveAllModules - Saving config and restarting services: firewall samba dns logs
2012/10/05 16:05:26 INFO> Base.pm:229 EBox::Module::Base::save - Restarting service for module: firewall
2012/10/05 16:05:28 INFO> Base.pm:229 EBox::Module::Base::save - Restarting service for module: samba
2012/10/05 16:05:29 INFO> Samba.pm:822 EBox::Samba::__ANON__ - Joining to domain 'csc.it' as DC
2012/10/05 16:05:30 ERROR> Samba.pm:859 EBox::Samba::__ANON__ - Error joining to domain: ERROR(ldb): uncaught exception - LDAP error 32 LDAP_NO_SUCH_OBJECT - CN=Sites,CN=Configuration,DC=CSC,DC=IT <0000208D: NameErr: DSID-031001BD, problem 2001 (NO_OBJECT), data 0, best match of:
'CN=Sites,CN=Configuration,DC=CSC,DC=IT'
> <>
File "/usr/lib/python2.7/dist-packages/samba/netcmd/__init__.py", line 168, in _run
return self.run(*args, **kwargs)
File "/usr/lib/python2.7/dist-packages/samba/netcmd/domain.py", line 555, in run
machinepass=machinepass, use_ntvfs=use_ntvfs, dns_backend=dns_backend)
File "/usr/lib/python2.7/dist-packages/samba/join.py", line 1090, in join_DC
ctx.do_join()
File "/usr/lib/python2.7/dist-packages/samba/join.py", line 993, in do_join
ctx.join_add_objects()
File "/usr/lib/python2.7/dist-packages/samba/join.py", line 517, in join_add_objects
ctx.samdb.add(rec)
2012/10/05 16:05:30 INFO> Base.pm:229 EBox::Module::Base::save - Restarting service for module: dns
2012/10/05 16:05:31 WARN> DNS.pm:1762 EBox::DNS::switchToReverseInfoData - Domain 'csc.it' already mapped to IP group '153.168.192', domain csc.it skipped
2012/10/05 16:05:33 ERROR> GlobalImpl.pm:646 EBox::GlobalImpl::__ANON__ - Failed to save changes in module samba: Error joining to domain: ERROR(ldb): uncaught exception - LDAP error 32 LDAP_NO_SUCH_OBJECT - CN=Sites,CN=Configuration,DC=CSC,DC=IT <0000208D: NameErr: DSID-031001BD, problem 2001 (NO_OBJECT), data 0, best match of:
'CN=Sites,CN=Configuration,DC=CSC,DC=IT'
> <>
File "/usr/lib/python2.7/dist-packages/samba/netcmd/__init__.py", line 168, in _run
return self.run(*args, **kwargs)
File "/usr/lib/python2.7/dist-packages/samba/netcmd/domain.py", line 555, in run
machinepass=machinepass, use_ntvfs=use_ntvfs, dns_backend=dns_backend)
File "/usr/lib/python2.7/dist-packages/samba/join.py", line 1090, in join_DC
ctx.do_join()
File "/usr/lib/python2.7/dist-packages/samba/join.py", line 993, in do_join
ctx.join_add_objects()
File "/usr/lib/python2.7/dist-packages/samba/join.py", line 517, in join_add_objects
ctx.samdb.add(rec)
2012/10/05 16:05:33 INFO> Base.pm:229 EBox::Module::Base::save - Restarting service for module: dns
2012/10/05 16:05:34 WARN> DNS.pm:1762 EBox::DNS::switchToReverseInfoData - Domain 'csc.it' already mapped to IP group '153.168.192', domain csc.it skipped
2012/10/05 16:05:36 INFO> Base.pm:229 EBox::Module::Base::save - Restarting service for module: logs
2012/10/05 16:05:37 ERROR> GlobalImpl.pm:703 EBox::GlobalImpl::saveAllModules - The following modules failed while saving their changes, their state is unknown: samba
i tryed to query the ldap server with my credential, but this raised this error:
Code: [Select]
ldapsearch -H ldap://cscs1.csc.it
ldap_sasl_interactive_bind_s: Unknown authentication method (-6)
additional info: SASL(-4): no mechanism available: No worthy mechs found
i goggled to found that is error is due to a missing library, so i installed libsasl2-modules-gssapi-heimdal
after this, trying to query the AD i get this is the error:
Code: [Select]
ldapsearch -H ldap://cscs1.csc.it
SASL/GSSAPI authentication started
ldap_sasl_interactive_bind_s: Local error (-2)
additional info: SASL(-1): generic failure: GSSAPI Error: Miscellaneous failure (see text) (open(/tmp/krb5cc_1000): No such file or directory)
it seems that kerberos is not inizialized:
Code: [Select]
klist
klist: No ticket file: /tmp/krb5cc_1000
kinit
administrator@CSC.IT's Password:
kinit: krb5_get_init_creds: Client (administrator@CSC.IT) unknown
i'm not a kerberos or ldap expert, so at this point, to not interfer with zentyal packages management i prefer to stop my debug work and i hope in some help from the community to solve my problems
many thanks... and... sorry for my bad english ;-)
Max
4
Installation and Upgrades / Re: Antivirus and Mailfilter Problem
« on: November 25, 2010, 04:53:06 pm »
Many thanks Sam, updating apt and reinstalling the two modules fixed the problem fro me.
5
Installation and Upgrades / [Solved]Antivirus and Mailfilter Problem
« on: November 25, 2010, 01:23:55 pm »
I installed the antivirus and Mailfilter modules.
i didn't configured the mail module, because i don't need it.
both mailfilter and antivirus modules are enabled and are reported as 'started' in the dashboard.
in the antivirus page is reported:
Stato: The antivirus database has not been updated since the module was enabled.
Data: Thu Nov 25 13:16:17 2010
Signatures: 851701
any suggestion?
many thanks
i didn't configured the mail module, because i don't need it.
both mailfilter and antivirus modules are enabled and are reported as 'started' in the dashboard.
in the antivirus page is reported:
Stato: The antivirus database has not been updated since the module was enabled.
Data: Thu Nov 25 13:16:17 2010
Signatures: 851701
any suggestion?
many thanks
6
Installation and Upgrades / ebox 1.5 - printers duplicated entries in printers.conf
« on: August 05, 2010, 03:35:55 pm »
i've a lot of problem with printers module.
first of all i encountered the hplip driver problem stated here:
http://forum.ebox-platform.com/index.php?topic=4101
then i found a bug that broke the printers module.
after a fresh install of a printer (ipp or AppSocket network printer) the printers seems to work and print test pages.
in /etc/cups/printers.conf there are two different printer entries, one for cups and another delimited by the ebox tags.
to enable this printer for the users a 'save changes' (and module restart) is required.
when the module restart the printers.conf file shows two identical entries, but the ebox tags are gone.
every modification that requires a 'save changes' adds another identical printer entry in printer.conf.
also restarting fthe printers sharing service from the dashboard add another printer entry in printers.conf.
enabling the cups web interface show a printer for every entry in printers.conf, but in the ebox printer admin web gui only one appears.
obviouosly none of the printers showed in cups web interface can print.
the printers is present in the domain resources of the ebox pc, and it is possible to connect it from others pc, but the printer does not work (no port connected)
i verified this problem both in an ebox installer setup and in lucid setup+ebox ppa
i didn't test the new 1.5-1, i will try it tomorrow and will report the result.
this is my actual printer.conf:
# Printer configuration file for CUPS v1.4.3
# Written by cupsd
# DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING
<Printer HPJD>
Info HP LaserJet 6MP Postscript
MakeModel HP LaserJet 6MP Foomatic/Postscript
DeviceURI socket://192.168.153.208:9100
State Idle
StateTime 1281011466
Type 8400916
Filter application/vnd.cups-raw 0 -
Filter application/vnd.cups-postscript 100 foomatic-rip
Filter application/vnd.cups-pdf 0 foomatic-rip
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy retry-job
</Printer>
<Printer HPJD>
Info HP LaserJet 6MP Postscript
DeviceURI socket://192.168.153.208:9100
State Idle
StateTime 1281012158
Type 0
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy retry-job
</Printer>
<Printer HPJD>
Info HP LaserJet 6MP Postscript
DeviceURI socket://192.168.153.208:9100
State Idle
StateTime 1281012224
Type 0
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy retry-job
</Printer>
first of all i encountered the hplip driver problem stated here:
http://forum.ebox-platform.com/index.php?topic=4101
then i found a bug that broke the printers module.
after a fresh install of a printer (ipp or AppSocket network printer) the printers seems to work and print test pages.
in /etc/cups/printers.conf there are two different printer entries, one for cups and another delimited by the ebox tags.
to enable this printer for the users a 'save changes' (and module restart) is required.
when the module restart the printers.conf file shows two identical entries, but the ebox tags are gone.
every modification that requires a 'save changes' adds another identical printer entry in printer.conf.
also restarting fthe printers sharing service from the dashboard add another printer entry in printers.conf.
enabling the cups web interface show a printer for every entry in printers.conf, but in the ebox printer admin web gui only one appears.
obviouosly none of the printers showed in cups web interface can print.
the printers is present in the domain resources of the ebox pc, and it is possible to connect it from others pc, but the printer does not work (no port connected)
i verified this problem both in an ebox installer setup and in lucid setup+ebox ppa
i didn't test the new 1.5-1, i will try it tomorrow and will report the result.
this is my actual printer.conf:
# Printer configuration file for CUPS v1.4.3
# Written by cupsd
# DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING
<Printer HPJD>
Info HP LaserJet 6MP Postscript
MakeModel HP LaserJet 6MP Foomatic/Postscript
DeviceURI socket://192.168.153.208:9100
State Idle
StateTime 1281011466
Type 8400916
Filter application/vnd.cups-raw 0 -
Filter application/vnd.cups-postscript 100 foomatic-rip
Filter application/vnd.cups-pdf 0 foomatic-rip
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy retry-job
</Printer>
<Printer HPJD>
Info HP LaserJet 6MP Postscript
DeviceURI socket://192.168.153.208:9100
State Idle
StateTime 1281012158
Type 0
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy retry-job
</Printer>
<Printer HPJD>
Info HP LaserJet 6MP Postscript
DeviceURI socket://192.168.153.208:9100
State Idle
StateTime 1281012224
Type 0
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy retry-job
</Printer>
7
Installation and Upgrades / Re: Can't add new printer
« on: August 05, 2010, 03:06:05 pm »
same problem...
i noted that it is possible to install a printer with a fake driver and then modify the driver and use the hplip one
i noted that it is possible to install a printer with a fake driver and then modify the driver and use the hplip one
8
Installation and Upgrades / Re: ebox 1.4 samba 3.4.6 read/write problems on shares
« on: April 09, 2010, 01:02:05 pm »
@sidmax
many many thanks
it seems that this full_audit problem was reported also in samba mailing list, and that it appears randomly, so there is no way for the programmers to reproduce the bug.
really strange.
anyway i think that such a problem that affect some people should at least to be mentioned in the documentation/faq.
any ebox developer/manteiner here?
many many thanks
it seems that this full_audit problem was reported also in samba mailing list, and that it appears randomly, so there is no way for the programmers to reproduce the bug.
really strange.
anyway i think that such a problem that affect some people should at least to be mentioned in the documentation/faq.
any ebox developer/manteiner here?
9
Installation and Upgrades / Re: ebox 1.4 samba 3.4.6 read/write problems on shares
« on: March 24, 2010, 09:52:26 am »
bump!
i now that the information i provided are generic, but really i don't know how further investigate and provide more information.
the problem is surely related with the the samba version, but the lack of errors in log stops my efforts to provide more informations.
i must solve this problem, i don't need the last version of samba so i will be happy also if i'll manage to reinstall samba management in ebox or even if i'll know how to add new users samba settings from command line...
so any suggestion is really appreciated
many thanks
i now that the information i provided are generic, but really i don't know how further investigate and provide more information.
the problem is surely related with the the samba version, but the lack of errors in log stops my efforts to provide more informations.
i must solve this problem, i don't need the last version of samba so i will be happy also if i'll manage to reinstall samba management in ebox or even if i'll know how to add new users samba settings from command line...
so any suggestion is really appreciated
many thanks
10
Installation and Upgrades / ebox 1.4 samba 3.4.6 read/write problems on shares
« on: March 17, 2010, 05:20:52 pm »
i've encountered some strange problems reading and writing files on samba shares from xp and win2000.
it is possible to write a file to the mounted share, and copy the file back to the local pc or delete it, but trying to read or write this file on the share is impossible.
every application report a different error.
notepad opens the file but trying to save after some changes report that 'there is not enough memory'.
open office can't open the file and trying to save a file directly to the share report an I/O error.
image preview simply can't open any image.
and so on.
there are no errors on the logs.
i downgraded to the hardy default samba versions, and now all works fine.
the downgrade also removed the ebox-samba package, and now i can't manage users and group from the ebox interface, so any suggestion to solve this problem is really appreciated
many thanks
it is possible to write a file to the mounted share, and copy the file back to the local pc or delete it, but trying to read or write this file on the share is impossible.
every application report a different error.
notepad opens the file but trying to save after some changes report that 'there is not enough memory'.
open office can't open the file and trying to save a file directly to the share report an I/O error.
image preview simply can't open any image.
and so on.
there are no errors on the logs.
i downgraded to the hardy default samba versions, and now all works fine.
the downgrade also removed the ebox-samba package, and now i can't manage users and group from the ebox interface, so any suggestion to solve this problem is really appreciated
many thanks
Pages: [1]