Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Krisztián Czakó

Pages: [1] 2
1
Kedves Szemy!

A 3.2 verzióig valóban voltak gondok az ékezetes felhasználó nevekkel, de ott is csak részlegesen: az AD rész kezelte, de az akkor még OpenLDAP-ra migrált felhasználók között nem jelentek meg.
A 4.0 verzióban már nincs OpenLDAP, a teljes LDAP szolgáltatást az AD rendszer (Samba) nyújtja és semmilyen probléma nincs az ékezetes felhasználó- és csoportnevekkel.

A korábbi verziók NEM támogatták az Office 2013-at, így ott logikus, hogy találkozhattál hibákkal ha azt akartad használni. A hivatalos Office 2013 támogatás a 4.0-ban jelent meg és stabilan működik.

Amit a hivatalos supporttól kapott válaszról írtál nagyon meglep, mivel én nem tudok róla, hogy ilyet írtunk volna bárkinek. Nem egy ügyfélnél működik Zentyal szerver, amit supportálunk és SOHA ilyen indokkal nem ráztunk le ügyfelet. Az általam ismert környezetekben működik a Zentyal akár magyar Windows szerverrel együtt vagy arról migrálva is.

Feltételezem, hogy jól csinálod, de azért javaslom nézz majd be az idén is folytatódó ingyenes, online Zentyal képzéseinkre, ahol többek között pont WIndows 2003 SBS migrálásáról is lesz szó a közeljövőben. Amint lesz pontos időpont az fent lesz a Zentyal.hu oldalon.

2
Magyar / Zentyal 4.0 telepítési hiba megoldása
« on: November 04, 2014, 06:44:10 pm »
A 4.0 verzióban sajnos benne maradt egy fordítási hiba, ami miatt nem fut le a telepítés, ha magyar nyelvet választasz és a hitelesítés szolgáltatót is felteszed. Amíg a hivatalos frissítés megérkezik (folyamatban), itt az átmeneti megoldás: http://zentyal.hu/zentyal-40-telepito-hibajavitas
A fenti működik már telepített 4.0 esetén is, ha a magyar nyelv fent van, illetve a 3.5 verzióval is.

3
Magyar / Re: Zentyal 4.0 - Hitelesítésszolgáltató - hiba [MEGOLDVA]
« on: November 04, 2014, 06:42:01 pm »
A fenti parancsok természetesen a telepített rendszerben is működnek, ha a magyar nyelv fent van.

4
Magyar / Re: Zentyal 3.5 CA
« on: November 04, 2014, 06:40:47 pm »
Javítottam a fordítást (az okozta a problémát). Amíg a hivatalos javító csomag megérkezik, itt elolvashatod, hogyan tudod a problémát a magyar nyelvű telepítés közben orvosolni:
http://zentyal.hu/zentyal-40-telepito-hibajavitas

5
Magyar / Re: Zentyal 4.0 - Hitelesítésszolgáltató - hiba
« on: November 04, 2014, 06:15:49 pm »
A konkrét problémát az okozza, hogy bármit is írsz a szervezet nevéhez, ahhoz hozzáteszi eredetileg angolul, de a magyar nyelv beállításával magyarul, hogy "szolgáltató tanúsítványa" és közben a rendszerben az van beállítva, hogy nem tartalmazhat a mező ékezetes karaktereket. Sima fordítási hiba :(

Javítottam a fordításban (ahogy végre az állapotot is megyére). Mivel a kész telepítőben nem tudom kicserélni, így a következőket tudod tenni:
1. Amikor fent van az alap és elindult a grafikus telepítő, mielőtt belépsz a böngészőben, nyiss egy terminált!
2. A terminálban:
wget http://zentyal.hu/zentyal.mo
sudo mv zentyal.mo /usr/share/locale/hu/LC_MESSAGES/zentyal.mo
sudo chown root.root /usr/share/locale/hu/LC_MESSAGES/zentyal.mo
3. Folytathatod a telepítést, mint rendesen.

Fejlesztők tudják, remélem rövidesen jön a javított nyelvi csomag :-)

6
I'm not afraid of LDAP, but of postfix, dovecot, squid, etc. All those classic Linux servers where these special characters at least unusual.

7
Installation and Upgrades / Re: Joining to an AD domain slow
« on: November 23, 2012, 05:39:24 pm »
Additional info: Zentyal appears just right after I've started to save on Zentyal web interface in the Windows SBS DC in the list of domain controllers.

8
Hi,

Thank you for your reply.

Does this mean that Zentyal will be able to import users and groups with special characters (space, $, accentuated letters)?
Will these users work with standard Linux services (not Samba4) like Postfix, Dovecot, Squid, etc without SSO/Kerberos domain logins?

Regards,
Krisztián


9
Installation and Upgrades / Joining to an AD domain slow
« on: November 23, 2012, 11:39:33 am »
Hi,

When I join to a Windows Server managed AD with Zentyal 3.0, it takes about 15 minutes to do it. For this time, nothing happens. The web gui stays at the saving dialog, in zentyal.log the last message is:
Code: [Select]
2012/11/23 02:34:56 INFO> Samba.pm:918 EBox::Samba::__ANON__ - Joining to domain 'linuxakademia.local' as DC.
The next messages in log are:
Code: [Select]
2012/11/23 02:50:46 INFO> Base.pm:229 EBox::Module::Base::save - Restarting service for module: dns
2012/11/23 02:50:47 WARN> DNS.pm:1445 EBox::DNS::_launchNSupdate - Cannot contact with named, trying in posthook
2012/11/23 02:51:00 INFO> Samba.pm:972 EBox::Samba::__ANON__ - Running KCC on windows DC
2012/11/23 02:51:11 INFO> Samba.pm:979 EBox::Samba::__ANON__ - Purging the Zentyal LDAP to import Samba users
2012/11/23 02:51:12 INFO> LDB.pm:444 EBox::LDB::ldapServicePrincipalsToLdb - Loading Zentyal service principals into samba database
2012/11/23 02:51:20 INFO> Samba.pm:711 EBox::Samba::mapAccounts - Mapping domain administrator account
2012/11/23 02:51:20 INFO> User.pm:470 EBox::Samba::User::addToZentyal - Adding samba user 'Rendszergazda' to Zentyal

You can see the 16 minutes gap. I've tested it with a fresh and default install of a Windows SBS 2008 with only one user added.

Is it normal or do I make something wrong?

Regards,
Krisztián


10
Hi,

I know that Linux does not like user names with spaces and local accentuated letters.
However Windows does. Especially a localized Windows SBS (I've tested 2008 and 2011) generates group and user names with localized names which includes accentuated letters. At least the Hungarian Windows does, I don't know other localizes Windows servers.

The problem is that Zentyal does not sync these users and groups from the AD with a "silent" log message in zentyal.log:
Code: [Select]
2012/11/23 11:27:07 INFO> Group.pm:248 EBox::Samba::Group::addToZentyal - Adding samba group 'Tartománygazdák' to Zentyal
2012/11/23 11:27:07 DEBUG> Group.pm:358 EBox::UsersAndGroups::Group::create - Érvénytelen érték: csoportn▒v: Tartománygazdák.
A problémák elkerülése érdekében a csoportnév csak betűkből, számjegyekből, aláhúzásokból, szóközökből, pontokból, kötőjelekből állhat, nem kezdődhet kötőjellel, és nem állhat csak számokból, szóközökből és pontokból.

The above is the DomainAdmins group in a localized Windows SBS 2008. And this is not a group we can miss...

Samba4 handles them, at least samba-tool user list and samba-tool group list shows them.

Do you have similar problem with your own localized Windows servers (not just Hungarian)? How do you solve this?

Regards,
Krisztián



11
Hi,

What else the master/slave architecture is good for? A small business don't need two mail servers. But they may need one file and one mail server.

The question in other way: for what purpose Zentyal 3.0 master/slave architecture is developed for and how to use it (what is the best practice)?

Regards,
Krisztián


12
Hi,

What is the preferred and recommended way of using two or more Zentyal 3.0 servers with master/slave setup?

I'd like to make a master server with DC (LDAP, Kerberos, DNS, DHCP) and file sharing (Samba) only (no mail, no other stuff).
I'd like to make a slave server with mail and Zarafa only (nothing else) which syncs all user data from the master.
I'd like to manage users on the master (all attributes, including mail).

How should I do this?
Do I need the file sharing/domain services on the mail and add it as an additional dc? Or this is just for joining to an existing Windows server's AD?

Thank you.

Regards,
Krisztián


13
Magyar / Re: VPN
« on: November 19, 2012, 10:11:40 pm »
Nagyjából jól érted.
Ha ott beállítasz egy kulcsot, akkor az a szerver csak az ott megadott kulccsal rendelkező személyt (vagy gépet) engedi be.
És igen, két lehetőséged van:
  • Az adott vpn kiszolgáló minden általad hitelesített kulccsal rendelkezőt beenged
  • Csak egy embert/gépet enged be
Köztes jelenleg nincs.
Nem tudok elvi korlátról a VPN kiszolgálók számára. Azt kellene megnézni, hogy hány tun illetve tap csatoló hozható Linux alatt létre. Ez korlátozza (ha van korlát az aktuális Linux kernelben, ami az Ubuntuban van).
Üdv,
Krisztián


14
Installation and Upgrades / Re: Multi relayhost MTA
« on: November 10, 2012, 11:24:30 am »
Hi,

In my understanding mappy wants some mail routing in Zentyal, something like this:
- if mail goes to istruzione.it, route mail to smtp.istruzione.it (or an other smtp server, this is just an example)
- if mail goes to scuola.it, route mail to smtp.scuola.it
- in other case route all mails to some other relay server

This can be set up in Postfix, but Zentyal has no interface for this function at this moment.

Regards,
Krisztián

15
Hi,

The "old fashioned way" (samba 3) does not require a working and correctly configured DNS. However samba 4 and kerberos does.
This has nothing with Zentyal, but all about the differences between a simple SMB servcie provided by Samba 3 and the AD service provided by Samba 4 and Kerberos.

Regards,
Krisztián


Pages: [1] 2