This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
1
Installation and Upgrades / Re: Zentyal Core 3.0.32 Web-Server
« on: April 06, 2014, 08:55:55 am »
Apparently, there is a new software package that is called HAProxy that is eating up the available HTTP port:
Can we get someone to fix this so we can have our services back?
Thanks!
Joe
Code: [Select]
netstat -apnt |grep 80
tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 9121/haproxy
netstat -apnt |grep 62080
tcp 0 0 127.0.0.1:62080 0.0.0.0:* LISTEN 11462/apache2
Can we get someone to fix this so we can have our services back?
Thanks!
Joe
2
Installation and Upgrades / Re: Zentyal Core 3.0.32 Web-Server
« on: April 06, 2014, 08:42:15 am »
Hi,
I am having the same problem. I am not able to access my virtual domains after a fresh install.
When I look at the sites config file, the virtual hosts looks strange:
For example:
They all seem to point to port 62080 and when I populate the virtual directory with a index file, its not even looked at.
Any ideas?
Its a fresh install of 3.4 from yesterday and a fresh update.
Thanks!
Joe
I am having the same problem. I am not able to access my virtual domains after a fresh install.
When I look at the sites config file, the virtual hosts looks strange:
For example:
Code: [Select]
<VirtualHost *:62080>
They all seem to point to port 62080 and when I populate the virtual directory with a index file, its not even looked at.
Any ideas?
Its a fresh install of 3.4 from yesterday and a fresh update.
Thanks!
Joe
3
Installation and Upgrades / Re: freshclam-observer Permission denied
« on: May 04, 2013, 07:02:18 am »
Well, after the upgrade and checking e-mail all day, I have to say that I think this is fixed
Thanks!
Joe
Thanks!
Joe
4
Installation and Upgrades / Re: freshclam-observer Permission denied
« on: May 03, 2013, 06:25:27 pm »I'll look at that.... but today there was an update to the zentyal-clamav module and it seems to fix the issue.
I'm running zentyal 3 BTW.
Cheers
Cool, just upgraded... We will see what happens...
Thanks!
Joe
5
Installation and Upgrades / Re: freshclam-observer Permission denied
« on: May 03, 2013, 06:25:09 pm »As far as I know this has been an issue since Zentyal 3.0 was released. When I stand up a new server, it's just part of my checklist to "sudo chmod 755 /usr/share/zentyal-antivirus/freshclam-observer".
James
Ooohh, ok, didn't think about trying that .
Anytime there is an issue with Zentyal specific items, I always post here or a bug report... General Linux issues, yeah, I'll hack around
Thanks!
6
Installation and Upgrades / Re: freshclam-observer Permission denied
« on: May 03, 2013, 05:43:33 am »
I haven't received any update from anyone, however, I do have a bug report for it if you want to chime in there too:
#6621: freshclam-observer Permission denied after update
http://trac.zentyal.org/ticket/6621
Thanks!
Joe
#6621: freshclam-observer Permission denied after update
http://trac.zentyal.org/ticket/6621
Thanks!
Joe
7
Installation and Upgrades / Re: freshclam-observer Permission denied
« on: April 30, 2013, 05:38:37 pm »
Actually, I don't apparmor installed or even running, so its probably not that
8
Installation and Upgrades / Re: freshclam-observer Permission denied
« on: April 30, 2013, 05:36:06 pm »
Hi Sam,
I took a look at the kern.log and didn't see these error there, but I can add the bits like they did in the other thread to see if that helps.
Thanks!
Joe
I took a look at the kern.log and didn't see these error there, but I can add the bits like they did in the other thread to see if that helps.
Thanks!
Joe
9
Installation and Upgrades / Re: freshclam-observer Permission denied
« on: April 30, 2013, 05:20:09 pm »
Hi Sam,
Yeah, I saw that too and it seemed a bit vague (Even after I put it into translate mode :-D.)
I have seen where freshclam would get permission issues when using the clamav PPA, but that was usually a quick permissions fix for the run files, however, this looks deeper into the Zentyal scripts specifically.
Perhaps I will put in a bug report and see where it goes.
Thanks for the reply!
Joe
Yeah, I saw that too and it seemed a bit vague (Even after I put it into translate mode :-D.)
I have seen where freshclam would get permission issues when using the clamav PPA, but that was usually a quick permissions fix for the run files, however, this looks deeper into the Zentyal scripts specifically.
Perhaps I will put in a bug report and see where it goes.
Thanks for the reply!
Joe
10
Installation and Upgrades / [SOLVED] freshclam-observer Permission denied
« on: April 30, 2013, 04:09:20 am »
Hi All,
I was poking around on the server today and noticed some e-mail to clamav dating back to March 21st that had this message in it:
I took a look at the apt history and noticed on that day, this update:
Is this something I should put a bug report in for or is there a quick and simple fix?
Oh, and btw:
Thanks!
Joe
I was poking around on the server today and noticed some e-mail to clamav dating back to March 21st that had this message in it:
Code: [Select]
sh: 1: /usr/share/zentyal-antivirus/freshclam-observer: Permission denied
I took a look at the apt history and noticed on that day, this update:
Code: [Select]
Start-Date: 2013-03-21 07:52:27
Commandline: apt-get upgrade
Upgrade: clamav:amd64 (0.97.6+dfsg-1ubuntu0.12.04.1, 0.97.7+dfsg-1ubuntu0.12.04.1), zentyal-monitor:amd64 (3.0.2, 3.0.3), clamav-base:amd64 (0.97.6+dfsg-1ubuntu0.12.04.1, 0.97.7+dfsg-1ubuntu0.12.04.1), libclamav6:amd64 (0.97.6+dfsg-1ubuntu0.12.04.1, 0.97.7+dfsg-1ubuntu0.12.04.1), zentyal-users:amd64 (3.0.12, 3.0.13), udev:amd64 (175-0ubuntu9.2, 175-0ubuntu9.3), libudev0:amd64 (175-0ubuntu9.2, 175-0ubuntu9.3), clamav-freshclam:amd64 (0.97.6+dfsg-1ubuntu0.12.04.1, 0.97.7+dfsg-1ubuntu0.12.04.1), clamav-daemon:amd64 (0.97.6+dfsg-1ubuntu0.12.04.1, 0.97.7+dfsg-1ubuntu0.12.04.1), iptables:amd64 (1.4.12-1ubuntu4+zentyal1, 1.4.12-1ubuntu5), zentyal-core:amd64 (3.0.16, 3.0.17)
End-Date: 2013-03-21 07:53:46
Is this something I should put a bug report in for or is there a quick and simple fix?
Oh, and btw:
Code: [Select]
Last Status:
WARNING: Your ClamAV installation is OUTDATED!
WARNING: Local version: 0.97.7 Recommended version: 0.97.8
DON'T PANIC! Read http://www.clamav.net/support/faq
main.cvd is up to date (version: 54, sigs: 1044387, f-level: 60, builder: sven)
daily.cld is up to date (version: 17110, sigs: 1166542, f-level: 63, builder: neo)
bytecode.cvd is up to date (version: 214, sigs: 41, f-level: 63, builder: neo)
Thanks!
Joe
11
Installation and Upgrades / Re: Changed my root password from shell and now can't log into Zentyal Admin Web
« on: April 12, 2013, 04:43:22 pm »
Also, using root account is bad - let alone changing its password... You should use sudo -i to gain root shell.
Just thought I would mention that in case you didn't know.
Thanks!
Joe
Just thought I would mention that in case you didn't know.
Thanks!
Joe
12
Installation and Upgrades / gssapi login failure after update this morning
« on: April 12, 2013, 04:38:56 pm »
Hi Forum,
I did an update this morning and now cannot login using gssapi.
Update info:
Error:
dmesg output:
I can still login using plain login, but some of my clients use gssapi as well.
Any ideas?
Thanks!
Joe
I did an update this morning and now cannot login using gssapi.
Update info:
Code: [Select]
Start-Date: 2013-04-12 06:15:05
Commandline: apt-get dist-upgrade
Install: libgssapi-perl:amd64 (0.28-1build2, automatic), libsasl2-modules-gssapi-heimdal:amd64 (2.1.25.dfsg1-3ubuntu0.1, automatic), msktutil:amd64 (0.4.2-2, automatic)
Upgrade: zentyal-network:amd64 (3.0.3, 3.0.5), zentyal-users:amd64 (3.0.13, 3.0.14), libauthen-krb5-easy-perl:amd64 (0.90-5, 0.90-6), zentyal-squid:amd64 (3.0.6, 3.0.7), zentyal-core:amd64 (3.0.17, 3.0.18)
End-Date: 2013-04-12 06:15:50
Error:
Code: [Select]
Apr 12 08:20:00 servername dovecot: imap-login: Aborted login (auth failed, 2 attempts): user=<me@DOMAIN.COM>, method=GSSAPI, rip=127.0.0.1, lip=127.0.1.1, TLS
dmesg output:
Code: [Select]
[ 96.465996] init: zentyal.heimdal-kdc main process (4157) killed by TERM signal
[ 96.486967] init: zentyal.heimdal-kpasswd main process ended, respawning
[ 96.825671] init: zentyal.heimdal-kpasswd main process (4961) killed by TERM signal
[ 99.477504] init: vsftpd main process (842) killed by TERM signal
[ 114.918902] init: dovecot main process (1070) killed by KILL signal
I can still login using plain login, but some of my clients use gssapi as well.
Any ideas?
Thanks!
Joe
13
Installation and Upgrades / Re: [Solved] dissapointed by 3.0
« on: March 25, 2013, 05:40:00 pm »Joe - thanks for all your work running this down. I think you might be on to something with the groups as we had a similar issue. I can totally relate to what you are saying about it being a blur from having to install and re-install. We have been building the servers on the ZenServer hypervisor. So it is not related to ESX - it is definitely in the current package. You have an update to what you found?
You know, after I restored from my backup, I didn't have any issues at all with the install. I did one other install for a client and there seems to have been some updates to Samba and the user account module that may have fixed my previous issues as I have not encountered any problems since.
Looks like they may have fixed the issues we were seeing.
Thanks!
Joe
14
Installation and Upgrades / Re: ClamAV out of date error
« on: March 15, 2013, 06:26:35 pm »
I see this is still an issue with Zentyal 3...
Sigh! Back to using the ppa I suppose.
Would be nice to have had this fixed in the new version, but it doesn't look as though that happened.
I will post a bug report on this.
Thanks!
Joe
Code: [Select]
Fri Mar 15 11:00:01 2013 -> ClamAV update process started at Fri Mar 15 11:00:01 2013
Fri Mar 15 11:00:01 2013 -> WARNING: Your ClamAV installation is OUTDATED!
Fri Mar 15 11:00:01 2013 -> WARNING: Local version: 0.97.6 Recommended version: 0.97.7
Fri Mar 15 11:00:01 2013 -> DON'T PANIC! Read http://www.clamav.net/support/faq
Fri Mar 15 11:00:01 2013 -> main.cvd is up to date (version: 54, sigs: 1044387, f-level: 60, builder: sven)
Fri Mar 15 11:00:01 2013 -> daily.cld is up to date (version: 16853, sigs: 951539, f-level: 63, builder: neo)
Fri Mar 15 11:00:01 2013 -> bytecode.cvd is up to date (version: 214, sigs: 41, f-level: 63, builder: neo)
Sigh! Back to using the ppa I suppose.
Would be nice to have had this fixed in the new version, but it doesn't look as though that happened.
I will post a bug report on this.
Thanks!
Joe
15
Installation and Upgrades / Re: s3fs or ntvfs?
« on: March 11, 2013, 09:25:24 pm »
According to the Samba Wiki,
https://wiki.samba.org/index.php/Samba4/s3fs
Hope this helps!
Joe
Quote
s3fs is the default. To use the previous default, the ntvfs server use --use-ntvfs at provision time or add these lines from the smb.conf
server services = +smb -s3fs
dcerpc endpoint servers = +winreg +srvsvc
https://wiki.samba.org/index.php/Samba4/s3fs
Hope this helps!
Joe