Recent Posts
71
German / Re: Login in die Domäne plötzlich nicht mehr möglich, betrifft aber nur einen Client
« Last post by Thomas Hoffmann on December 19, 2023, 06:17:48 pm »Hallo Zorus,
bei Windows 10 in Verbindung mit LDAP (bei uns Univention) konnte ich feststellen, das nach Windows Updates, Drucker veschwunden waren, Netzlaufwerke weg waren und und und ...
Auch kam das Problem, das die User sich nicht mehr an der Domäne anmelden konnten. Wir haben diesen Fehler dann nur beheben können, indem wir den Rechner aus der Domäne zu entfernen und wieder aufzunehmen. Nach der Aufnahme in eine Workgroup, haben wir aber keinen "Neustart" durchgeführt, nur das Fenster geschlossen, wieder geöffnet und den Rechner dann in die Domäne aufgenommen, danach dann einen Neustart.
Vielleicht hilft es ja.
Gruss
Thomas
bei Windows 10 in Verbindung mit LDAP (bei uns Univention) konnte ich feststellen, das nach Windows Updates, Drucker veschwunden waren, Netzlaufwerke weg waren und und und ...
Auch kam das Problem, das die User sich nicht mehr an der Domäne anmelden konnten. Wir haben diesen Fehler dann nur beheben können, indem wir den Rechner aus der Domäne zu entfernen und wieder aufzunehmen. Nach der Aufnahme in eine Workgroup, haben wir aber keinen "Neustart" durchgeführt, nur das Fenster geschlossen, wieder geöffnet und den Rechner dann in die Domäne aufgenommen, danach dann einen Neustart.
Vielleicht hilft es ja.
Gruss
Thomas
72
German / Re: Zentyal 7.1 Erfahrungen
« Last post by Thomas Hoffmann on December 19, 2023, 06:06:19 pm »Hallo Lueghi,
ich habe es vor einigen Tagen durchgeführt. Installation war einfach und schnell. Läuft bei mir alles wie gewohnt. Habe auch nach dem ersten Update keine Probleme
Gruss
Thomas
ich habe es vor einigen Tagen durchgeführt. Installation war einfach und schnell. Läuft bei mir alles wie gewohnt. Habe auch nach dem ersten Update keine Probleme
Gruss
Thomas
73
Installation and Upgrades / Re: Zentyal 8
« Last post by foeke on December 11, 2023, 11:39:37 am »I think I am spoiled with the ClearOS I was used to. I never experienced so many rough patches.
When I install by just going next next next you get everything on a 100Gb part of the LVM. Easy to resolve, but it makes no sense.
I ran into the issue that it doesn't support PPPoE with a fixed IP (https://forum.zentyal.org/index.php/topic,35644.0.html) I now know it should work since under plain Ubuntu it works like I expected. I just don't know what happens if I mess with settings in the OS that do not align with the webinterface.
When making changes with the VLAN's (in the end I just gave up) and then going back to plain ethernet, you'll get all kind of issues, because Zentyal doesn't remove the VLAN settings, it just removes it from the interface.
Everything looks right, but things like DHCP/DNS/SAMBA just give up and won't start anymore.
And I am pretty sure there is a bug in the user/user rights.
If you make a user and then configure the rights, it probably works just fine. When you add 10 users and configure the rights, and then save. It becomes a lottery.
The webinterface tells everything is correct. But getting the client connected to the shares is a different thing. Completely random. like 3 of the 10 won't be able to connect to some share, sometimes even the personal one.
Luckily when you switch the Acces control from "read/write" to "administrator" or "read-only", save. Then switch it back and save again. Everything is works as expected.
I really believe Zentyal should use Beta testers.
When I install by just going next next next you get everything on a 100Gb part of the LVM. Easy to resolve, but it makes no sense.
I ran into the issue that it doesn't support PPPoE with a fixed IP (https://forum.zentyal.org/index.php/topic,35644.0.html) I now know it should work since under plain Ubuntu it works like I expected. I just don't know what happens if I mess with settings in the OS that do not align with the webinterface.
When making changes with the VLAN's (in the end I just gave up) and then going back to plain ethernet, you'll get all kind of issues, because Zentyal doesn't remove the VLAN settings, it just removes it from the interface.
Everything looks right, but things like DHCP/DNS/SAMBA just give up and won't start anymore.
And I am pretty sure there is a bug in the user/user rights.
If you make a user and then configure the rights, it probably works just fine. When you add 10 users and configure the rights, and then save. It becomes a lottery.
The webinterface tells everything is correct. But getting the client connected to the shares is a different thing. Completely random. like 3 of the 10 won't be able to connect to some share, sometimes even the personal one.
Luckily when you switch the Acces control from "read/write" to "administrator" or "read-only", save. Then switch it back and save again. Everything is works as expected.
I really believe Zentyal should use Beta testers.
74
Installation and Upgrades / Re: Zentyal 8
« Last post by Luke on December 11, 2023, 11:05:56 am »Hi Luke,
What is the current status with 8.0?
If I understand correctly, Zentyal does not do Beta testing by users. But if you can use it, I'd be happy to make myself available.
7.1 had quite a few nonsensical settings that a beta tester had removed (for example, why on earth would you only free up 100Gb on your LVM).
Yea they made a post on Facebook what version people are using. And according from Zentyal the 8.0 is planned in Feb. I think 7.1 are working well ?
75
Installation and Upgrades / Re: Zentyal 8
« Last post by foeke on December 08, 2023, 10:38:52 am »Hi Luke,
What is the current status with 8.0?
If I understand correctly, Zentyal does not do Beta testing by users. But if you can use it, I'd be happy to make myself available.
7.1 had quite a few nonsensical settings that a beta tester had removed (for example, why on earth would you only free up 100Gb on your LVM).
What is the current status with 8.0?
If I understand correctly, Zentyal does not do Beta testing by users. But if you can use it, I'd be happy to make myself available.
7.1 had quite a few nonsensical settings that a beta tester had removed (for example, why on earth would you only free up 100Gb on your LVM).
76
Installation and Upgrades / Re: Lost connectivity to router and the internet
« Last post by turalyon on December 04, 2023, 11:02:03 am »Sometimes, when the network module is restarted by other dependencies, the content of /etc/resolv.conf is lost, and it requires the network to restart by hand.
Also, what modules are you using? Can you ping anything? For instance:
- Ping to your router.
- Ping to a public address (8.8.8.
- Ping a public domain (google.com)
Finally, you must analyze the network configuration (IP, gateway and DNS), whether the module is enabled or not, the rules from the firewall, if you have the IDS module, you might stop it temporarily, analyze the main log files:
- /var/log/zentyal/zentyal.log
- /var/log/syslog
—
This world is ours, and by the Holy Light, we will keep it safe, now and forever.
Code: [Select]
sudo zs network restart
Also, what modules are you using? Can you ping anything? For instance:
- Ping to your router.
- Ping to a public address (8.8.8.
- Ping a public domain (google.com)
Finally, you must analyze the network configuration (IP, gateway and DNS), whether the module is enabled or not, the rules from the firewall, if you have the IDS module, you might stop it temporarily, analyze the main log files:
- /var/log/zentyal/zentyal.log
- /var/log/syslog
—
This world is ours, and by the Holy Light, we will keep it safe, now and forever.
77
Installation and Upgrades / Re: i cant login on Web Interface -
« Last post by turalyon on December 04, 2023, 10:53:40 am »You must debug the issue by analyzing the following log files:
- /var/log/zentyal/zentyal.log
- /var/log/syslog
- /var/log/auth.log
- /var/log/zentyal/access.log
- /var/log/zentyal/error.log
- /var/log/nginx/error.log
Also, I recommend you to enable the debug module as follows:
1. Edit the parameter debug in the log file /etc/zentyal/zentyal.conf
2. Restart the webadmin module to apply the changes.
Finally, did you confirm that the services that manage the webadmin are running?
—
This world is ours, and by the Holy Light, we will keep it safe, now and forever.
- /var/log/zentyal/zentyal.log
- /var/log/syslog
- /var/log/auth.log
- /var/log/zentyal/access.log
- /var/log/zentyal/error.log
- /var/log/nginx/error.log
Also, I recommend you to enable the debug module as follows:
1. Edit the parameter debug in the log file /etc/zentyal/zentyal.conf
2. Restart the webadmin module to apply the changes.
Finally, did you confirm that the services that manage the webadmin are running?
Code: [Select]
sudo systemctl status zentyal.webadmin-nginx zentyal.webadmin-uwsgi
—
This world is ours, and by the Holy Light, we will keep it safe, now and forever.
78
Installation and Upgrades / Re: i cant login on Web Interface -
« Last post by federicososa on December 04, 2023, 09:56:43 am »Hi Thanks for the Reply.
yeap, i created an user named johnDoe and gave him all rights and still no chance to get in.
yeap, i created an user named johnDoe and gave him all rights and still no chance to get in.
79
Installation and Upgrades / Lost connectivity to router and the internet
« Last post by altiport on November 30, 2023, 09:12:06 pm »Hello,
After a reboot of my Zentyal 7.0 installation I lost all connectivity to the routers and, therefore, the internet.
Has the same thing happened to anyone else? I have tried everything I could think of, but I can't get my head around it.
Thank you!!!
After a reboot of my Zentyal 7.0 installation I lost all connectivity to the routers and, therefore, the internet.
Has the same thing happened to anyone else? I have tried everything I could think of, but I can't get my head around it.
Thank you!!!
Code: [Select]
~$ ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.200.1 netmask 255.255.255.0 broadcast 192.168.200.255
ether e8:de:27:a7:ae:50 txqueuelen 1000 (Ethernet)
RX packets 426706 bytes 104478873 (104.4 MB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 915797 bytes 1131695471 (1.1 GB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
eth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.151.2 netmask 255.255.255.0 broadcast 192.168.151.255
ether a0:36:9f:50:74:57 txqueuelen 1000 (Ethernet)
RX packets 29967 bytes 1925374 (1.9 MB)
RX errors 0 dropped 81 overruns 0 frame 0
TX packets 2165 bytes 93786 (93.7 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device memory 0xfe700000-fe7fffff
eth2: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.150.2 netmask 255.255.255.0 broadcast 192.168.150.255
ether 9c:b6:54:0b:e5:77 txqueuelen 1000 (Ethernet)
RX packets 271 bytes 20931 (20.9 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 20962 bytes 1343670 (1.3 MB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 18
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
loop txqueuelen 1000 (Local Loopback)
RX packets 210677 bytes 22703694 (22.7 MB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 210677 bytes 22703694 (22.7 MB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
tap0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.210.1 netmask 255.255.255.0 broadcast 192.168.210.255
ether a6:ec:21:92:98:49 txqueuelen 100 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
80
Other modules / Primary and Secondary DNS on MS stations
« Last post by juliocp1976 on November 30, 2023, 12:19:21 am »Hello, I have the following scenario: Zentyal 7 with Domain Controller (SRV01) and or Zentyal 7 Additional Domain Controller (SRV02).
On Windows machines I use the primary DNS SRV01 - 172.16.0.100 and secondary DNS 8.8.8.8, so the machines authenticate with SAMBA and browse the internet normally.
As my network is growing to almost 2,000 hosts, I created this Additional server because if the Primary fails or is isolated due to a problem, the Additional takes over.
HOWEVER, if I configure the windows machines DNS1 Primary server and DNS2 Additional, the machines DO NOT browse the internet.
I configured Zentyal according to the manual for it
etc/zentyal/dns.conf
# Example: intnets = 192.168.99.0/24,192.168.98.0/24
intnets = 172.16.0.0/16,192.168.1.0/24
DNS server is set to - Enable transparent DNS cache.
Forwarders - 172.16.0.100, 8.8.8.8, 1,1,1,1
Does anyone know where I can adjust this?