This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
601
Installation and Upgrades / Re: EBOX 1.4 - AD SYNC WORKING !
« on: June 15, 2010, 03:35:32 am »
Hello,
I do the tests above:
cd /usr/share/ebox-usersandgroups
./ebox-ad-sync [ok]
./ebox-pwdsync-server [ok]
And try "telnet <ip ebox> 6677" using the Windows 2003 Server... In the /var/log/ebox/ebox.log i can see:
The AD-SYNC is ok... If I create a new user in Windows 2003, this user is transfered to eBox... But when i change de password in 2003, the password isn't transfered... I'm using password without simbols like "!", "@", etc...
Some of you can help me?
Thanks,
Jorge Quintão
I do the tests above:
cd /usr/share/ebox-usersandgroups
./ebox-ad-sync [ok]
./ebox-pwdsync-server [ok]
And try "telnet <ip ebox> 6677" using the Windows 2003 Server... In the /var/log/ebox/ebox.log i can see:
Code: [Select]
2010/06/14 22:40:53 DEBUG> ebox-pwdsync-server:63 main:: - [ad-pwdsync] connection from 10.10.10.202
2010/06/14 22:41:38 DEBUG> ebox-pwdsync-server:92 main::handleRequest - [ad-pwdsync] handleRequest() called
2010/06/14 22:41:38 ERROR> ebox-pwdsync-server:96 main::handleRequest - [ad-pwdsync] Can't read lengths in handleRequest
2010/06/14 22:41:38 DEBUG> ebox-pwdsync-server:75 main:: - [ad-pwdsync] error updating password
2010/06/14 22:42:01 INFO> Log.pm:119 EBox::Event::Dispatcher::Log::send - $VAR1 = bless( {
'source' => 'Serviço',
'level' => 'error',
'dispatchers' => [
'any'
],
'timestamp' => 1276566121,
'message' => 'The following modules are not running but they are enabled: Usuários e Grupos'
}, 'EBox::Event' );
The AD-SYNC is ok... If I create a new user in Windows 2003, this user is transfered to eBox... But when i change de password in 2003, the password isn't transfered... I'm using password without simbols like "!", "@", etc...
Some of you can help me?
Thanks,
Jorge Quintão
602
Portuguese / Re: Erro ao habilitar Users and Groups
« on: June 13, 2010, 11:50:02 pm »
Gabriel,
O meu tava funcionando no 1.4... Como te disse, a 1.5 ė beta...
Abraços,
Jorge
O meu tava funcionando no 1.4... Como te disse, a 1.5 ė beta...
Abraços,
Jorge
603
Portuguese / Re: Erro no OpenVPN Server
« on: June 13, 2010, 11:46:10 pm »
Gabriel,
A versão 1.5 é instável... Se vc deseja ver as coisas funcionando deve usar a versão 1.4... Na 1.4 jamais experimentei este tipo de erro no módulo VPN...
Abraço,
Jorge
A versão 1.5 é instável... Se vc deseja ver as coisas funcionando deve usar a versão 1.4... Na 1.4 jamais experimentei este tipo de erro no módulo VPN...
Abraço,
Jorge
604
Portuguese / Re: dificuldade entre dominio interno e externo como rotear?
« on: June 09, 2010, 03:24:56 pm »
Andre,
Eu concordo com você... Se vai usar ASP, instale no Windows... Acho que instalar ASP em servidor Linux é gambiarra... Já se for usar PHP, acho que é melhor usar Linux... Acho que devemos preservar cada macaco no seu galho...
Abraços,
Jorge
Eu concordo com você... Se vai usar ASP, instale no Windows... Acho que instalar ASP em servidor Linux é gambiarra... Já se for usar PHP, acho que é melhor usar Linux... Acho que devemos preservar cada macaco no seu galho...
Abraços,
Jorge
605
Portuguese / Re: pq NTP Server start e stop várias vezes no boot?
« on: June 09, 2010, 03:18:42 pm »
Andre,
Isto também me incomoda... Conversando com o J. A. Calvo, um dos lideres do projeto, ele me informou há algum tempo atrás que estavam trabalhando para corrigir estas mensagens de warning e restart de serviços que aparecem quando a gente reiniciar alguns módulos através do /etc/init.d/ebox <module> restart...
Abraços,
Jorge
Isto também me incomoda... Conversando com o J. A. Calvo, um dos lideres do projeto, ele me informou há algum tempo atrás que estavam trabalhando para corrigir estas mensagens de warning e restart de serviços que aparecem quando a gente reiniciar alguns módulos através do /etc/init.d/ebox <module> restart...
Abraços,
Jorge
606
Portuguese / Re: dificuldade entre dominio interno e externo como rotear?
« on: June 07, 2010, 08:09:30 pm »
Olá Andre,
Quando você está usando IP fixo é mais complicado... Pra funcionar, vc precisará colocar o servidor web em um segmento de rede (placa de rede) diferente do segmento de rede (placa de rede) dos usuários internos... E ai você cria um redirecionamento para quem vem de fora e um outro, diferente, para quem vem de dentro...
Uma outra alternativa é você usar o proxy do Apache... Mas, sinceramente, acho que o melhor a fazer é criar um hostname para este IP, ai tudo fica mais simples... Você pode até deixar quem está na Internet continuar usando o IP e informar para os usuários internos um hostname...
Abraços,
Jorge
Quando você está usando IP fixo é mais complicado... Pra funcionar, vc precisará colocar o servidor web em um segmento de rede (placa de rede) diferente do segmento de rede (placa de rede) dos usuários internos... E ai você cria um redirecionamento para quem vem de fora e um outro, diferente, para quem vem de dentro...
Uma outra alternativa é você usar o proxy do Apache... Mas, sinceramente, acho que o melhor a fazer é criar um hostname para este IP, ai tudo fica mais simples... Você pode até deixar quem está na Internet continuar usando o IP e informar para os usuários internos um hostname...
Abraços,
Jorge
608
News and Announcements / Re: First version of the new FTP module released!
« on: June 07, 2010, 06:24:27 pm »
Hi Jose,
Is possible try this FTP module in 1.4.x version too?
Thanks,
Jorge Quintao
Is possible try this FTP module in 1.4.x version too?
Thanks,
Jorge Quintao
609
Portuguese / Re: Bug no módulo de Backup?
« on: June 07, 2010, 06:22:04 pm »
Olá André,
Seria interessante você reportar este BUG em "http://trac.ebox-platform.com/newticket" para que o problema seja corrigido...
Abraços,
Jorge
Seria interessante você reportar este BUG em "http://trac.ebox-platform.com/newticket" para que o problema seja corrigido...
Abraços,
Jorge
610
Portuguese / Re: dificuldade entre dominio interno e externo como rotear?
« on: June 07, 2010, 06:19:32 pm »
Olá André,
Este é um problema que ocorre quando o site web e as máquinas que irão consultá-lo estão no mesmo segmento de rede... A forma mais fácil de contornar isto é criar uma "view" no seu servidor DNS, de forma que o Bind comece a informar o IP interno para as máquinas da rede interna e o IP válido na internet para as máquinas externas...
Para maiores informações sobre "views" acesse:
http://gutocarvalho.net/mediawiki/index.php?title=BIND_Configurando_Views
PS: Para criar "views" no eBox vc terá que editar o "/usr/share/ebox/stubs/dns/named.conf.mas"...
Abraços,
Jorge
Este é um problema que ocorre quando o site web e as máquinas que irão consultá-lo estão no mesmo segmento de rede... A forma mais fácil de contornar isto é criar uma "view" no seu servidor DNS, de forma que o Bind comece a informar o IP interno para as máquinas da rede interna e o IP válido na internet para as máquinas externas...
Para maiores informações sobre "views" acesse:
http://gutocarvalho.net/mediawiki/index.php?title=BIND_Configurando_Views
PS: Para criar "views" no eBox vc terá que editar o "/usr/share/ebox/stubs/dns/named.conf.mas"...
Abraços,
Jorge
611
Installation and Upgrades / Re: PPPoE and OpenVPN
« on: June 07, 2010, 06:14:17 pm »
Hi,
I have actually a box with 2 fixed ip pppoe connections... I'm using ebox-openvpn version 1.4.2-0ubuntu1~ppa1~hardy1...
PPP interfaces do not appear on the web interface ... To work, if I check the interface under which the tunnel is PPPOE, the VPN works... But if I left the option "All Interfaces" marked the VPN connection isn't stable (intermittent)...
Thanks,
Jorge Quintao
I have actually a box with 2 fixed ip pppoe connections... I'm using ebox-openvpn version 1.4.2-0ubuntu1~ppa1~hardy1...
PPP interfaces do not appear on the web interface ... To work, if I check the interface under which the tunnel is PPPOE, the VPN works... But if I left the option "All Interfaces" marked the VPN connection isn't stable (intermittent)...
Thanks,
Jorge Quintao
613
Installation and Upgrades / Re: Error Webmail
« on: June 04, 2010, 05:50:21 pm »
Hi Tama,
Verify:
- If you have the simbolic link "000-default -> /etc/apache2/sites-available/default" inside "/etc/apache2/sites-enabled"
- If you have the simbolic links "php5.conf -> ../mods-available/php5.conf" and "php5.load -> ../mods-available/php5.load" inside "/etc/apache2/mods-enabled"
After create this links, try run:
- ebox apache restart
- ebox webserver restart
Clean your browser cache and try access "http://<internal-ip>/webmail" again...
Thanks,
Jorge Quintao
Verify:
- If you have the simbolic link "000-default -> /etc/apache2/sites-available/default" inside "/etc/apache2/sites-enabled"
- If you have the simbolic links "php5.conf -> ../mods-available/php5.conf" and "php5.load -> ../mods-available/php5.load" inside "/etc/apache2/mods-enabled"
After create this links, try run:
- ebox apache restart
- ebox webserver restart
Clean your browser cache and try access "http://<internal-ip>/webmail" again...
Thanks,
Jorge Quintao
614
Installation and Upgrades / Re: windows integrated authentication
« on: June 03, 2010, 01:10:48 pm »
Hi,
I'm using eBox with NTLM authentication... To do this, you need:
1) edit the file /usr/share/ebox/stubs/squid/squid.conf.mas and change de lines:
To:
Where your domain is "domain.local" and your server_name is "server_name"... If necessary, add "server_name" in your /etc/hosts files...
- after run /etc/init.d/ebox squid restart to generate the /etc/squid.conf file and restart the squid....
2) make a logon in your windows desktop against you windows server active directory and call the Firefox or Internet Explorer with the proxy turned on...
After this 2 steps, the users can connect without inform user and password... Try if this will work for you... If it work i can send you more tips for fix the problems with logs and suggest some things to create diferent groups...
I'm using eBox with NTLM authentication... To do this, you need:
1) edit the file /usr/share/ebox/stubs/squid/squid.conf.mas and change de lines:
Code: [Select]
auth_param basic realm eBox HTTP proxy
auth_param basic program /usr/lib/squid/ldap_auth -v 3 -b ou=Users,<% $dn %> -u uid -h ldap://127.0.0.1:<% $ldapport %>
acl authorized proxy_auth required
To:
Code: [Select]
#auth_param basic realm eBox HTTP proxy
#auth_param basic program /usr/lib/squid/ldap_auth -v 3 -b ou=Users,<% $dn %> -u uid -h ldap://127.0.0.1:<% $ldapport %>
auth_param ntlm program /usr/lib/squid/ntlm_auth -b -d domain.local/server_name
auth_param ntlm children 50
acl authorized proxy_auth required
Where your domain is "domain.local" and your server_name is "server_name"... If necessary, add "server_name" in your /etc/hosts files...
- after run /etc/init.d/ebox squid restart to generate the /etc/squid.conf file and restart the squid....
2) make a logon in your windows desktop against you windows server active directory and call the Firefox or Internet Explorer with the proxy turned on...
After this 2 steps, the users can connect without inform user and password... Try if this will work for you... If it work i can send you more tips for fix the problems with logs and suggest some things to create diferent groups...
615
Installation and Upgrades / Re: Help with EBox Mail Server
« on: June 02, 2010, 12:41:37 am »
Hi Rafa11,
To some filter options for PostFix, see:
http://postfixmail.com/blog/index.php/built-in-content-filters-for-postfix/
Thanks,
Jorge Eduardo Quintao
To some filter options for PostFix, see:
http://postfixmail.com/blog/index.php/built-in-content-filters-for-postfix/
Thanks,
Jorge Eduardo Quintao