Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - miquel

Pages: 1 [2] 3
16
IMHO nobody understands nobody, and this turns a simple question into a big problem.

While the original question is about zentyal behaviour once installed,  the answer is about zentyal (=ubuntu) installation proces itself

a) installation can keep existing home, if you want
b) once zentyal is running, will refuse to create new users with alreade existing directories
c) to reuse them, first you have to rename them, create user, remove empty home, and finally rename again old directory or something similar





17
Installation and Upgrades / Zentyal 2.3: FTP broken setup
« on: April 06, 2012, 01:54:38 pm »
It's not possible to activate ftp access for local users and restrict them to their personal directories at the same time, unless user directory is read only, wich normally is useless.

Vsftpd error is: 500 OOPS: vsftpd: refusing to run with writable root inside chroot()

Adding "local_root=/home" to vsftpd.conf, solves partially this issue, but chroots to /home instead private user home, and zentyal overrites it.

For local users, a better approach is to define option "passwd_chroot_enable=yes" in vsftpd.conf and set user directory to "/home/./user" (instead "/home/user) in /etc/passwd, but I don't know how to apply it to zentyal users.

I hope you can fix it soon.

Thanks.





18
I've virtualbox-4.1 (from virtualbox oficial repo) installed, but zentyal 2.2 doesn't recognize it and install kvm.

If I install virtualbox-ose instead, it works as espected.

Is there a way to solve it?

Thanks
Miquel.

19
Installation and Upgrades / Zentyal-virt: no keyboard
« on: March 02, 2012, 01:39:52 pm »
I can create a new kvm virtual machine using zentyal-virt, but I can't install anythink on it because keyboard is not detected :-(

Now I'm testing on zentyal 2.3 but I've same behaviour with 2.2

Using virt-manager interface instead, everythink is ok.

Is it any known issue or is it a bug?

Thanks.
Miquel

20
Spanish / Re: ssh por puerto alternativo
« on: January 31, 2012, 11:05:58 pm »
Tras ir a comer, investigué los logs, por si descubría algo, pero nada (al fin y al cabo, ni siquiera sabía lo que estaba buscando exactamente).

Lo único que descubrí fué un error en la configuración de dyndns, y tras corregirla, ya pude acceder por el puerto deseado.

No pienso que tenga ninguna relación con la configuración de dns, ya que a través del puerto 22 pude acceder en todo momento.

Posiblemente, otro expediente X
:-(


21
Spanish / ssh por puerto alternativo
« on: January 29, 2012, 02:31:33 pm »
Necesito que mi servidor Zentyal 2.2 permita conexiones por ssh desde internet (eth1) a través del puerto 1357 y que dichas conexiones sean gestionadas por una máquina virtual que está en la ip interna 192.168.11.99, a través del port 22 estándar.

Para ello he creado el servicio ssh-custom con los valores: tcp, origen cualquiera, destino 1357

En el cortafuegos he añadido la siguiente redirección: Interfaz: eth1, Destino original: Zentyal, TCP, 1357, cualquiera, IP destino: 192.168.11.99, puerto 22, registrar activado

Y por supuesto, he permitido el servicio ssh-custom en Filtrado de paquetes ▸ Desde redes externas hacia Zentyal

El caso es que esto me funciona perfectamente en Zentyal 2.0 pero no en la versión 2.2

¿Estoy pasando algo por alto?

22
Spanish / Re: Envio de correos al exterior
« on: January 25, 2012, 11:32:34 am »
La mejor opción es, efectivamente, enviar los correos vía smarthost.

En mi caso envío a través de una cuenta de 1&1, que me permite enviar con los dominios que quiera, no sólo el de la propia cuenta.

Una cuenta de correo gratuita también puede servir, pero hay proveedores que aplican restricciones: algunos machacan el dominio con el de la propia cuenta, una vez me ocurrió que los correos con letras acentuadas en el subject desaparecían misteriosamente...

Saludos.
Miquel.

23
Spanish / Roadmap provisional aburrido
« on: January 24, 2012, 11:44:26 pm »
Hace tiempo que puse en producción Zentyal 2.0, y admito que estoy más que satisfecho con el producto.

Este verano estuve 'betatesteando' con la versión 2.2 y, aunque la verdad es que actualmente funciona de perlas en mi servidor de pruebas, no siento la necesidad de actualizar la máquina que está en producción.

Revisando el roadmap de la versión 3.0... lamento decirlo, pero ni siquiera siento la necesidad de 'betatestear': al parecer, sólo cabe esperar actualizaciones de versión y escasas nuevas características (nada me encantaría más que descubrir que estoy equivocado).

No estoy pidiendo grandes, caros y exóticos nuevos añadidos. Muchas veces sería suficiente incluso documentar situaciones habituales y dejar la implementación de las mismas en la aplicación para un futuro.

También me gustaría saber en que se está trabajando y me tranquilizaría saber cómo van los progresos (Feature plan, done, work in progress, to do, ...).

Tengo algunas sugerencias y me expreso mejor en castellano que en inglés. ¿puedo proponerlas aquí o debo ir al 'feature request' en inglés?

Saludos.
Miquel.

24
Como LXDE no hace lo que necesito, yo hago la instalación con el dvd de Kubuntu, añado el repo de Zentyal y finalmente instalo Zentyal.

Com tu ya tienes el sistema instalado, un 'sudo apt-get install ubuntu-desktop' te permitirá añadir el escritorio gnome clásico (y 'apt-cache search ubuntu-desktop' te mostrará todos los escritorios disponibles).

Saludos.
Miquel.

25
Installation and Upgrades / Re: WEBMAIL
« on: September 16, 2011, 10:26:16 pm »
I don't understand what are you meaning.

Webmail password is exactly the same as the user's password.

If you are a system admin and don't like long passwords with a lot of characters, just don't use it when creating a new user.

If you are a single user, go to user corner and just change it.

Probably you're confusing the webmail password and ldap password, which normally is managed by Zentyal and that has nothing to do.

26
Installation and Upgrades / Re: Cant access Dashboard
« on: September 10, 2011, 10:25:51 pm »
Did you try 'sudo /etc/init.d/ebox restart'?

Any message?

27
Installation and Upgrades / Re: No more internet access for my lan :-(
« on: September 02, 2011, 09:52:07 pm »
> - it was previously working.

True. It worked fine, at least, until August 30 at 19:00.

> - you changed nothing and then it failed for machines on LAN while Zentyal was still able to access internet

That is. I detected this problem Agust 31 at 08:00

And worse (or not?): I can reproduce this odd behaviour in a clean install (same hardware, of course).

> - http proxy is used

Rigth too. BTW, enabling and disabling it, nothing seems to change.

> - if you add ISP DNS to machines on LAN, it works!!!

At least it worked today at 19:00 (and I hope tomorrow it still working)

> Or... I just realize this, your set up is made to use transparent proxy...  ;D
> Could you confirm this

Yes. It has been always enabled (last two days I did some test disabling it for a few minutes and enabled again).

> So your test is showing that HTTP proxy is not used (or not working)

Any idea to investigate it deeper?

Kubuntu 10.04.3 64bits (linux-server)
AMD 4850e
4GB RAM
2 x 1Tb as RAID1 + LVM
Router Huawei HG556a (Vodafone)
eth0 (internal): build in, 192.168.11.XXX
eth0 (external): pci, 192.168.0.XXX

(at home I've an identical box but different router, both available for any kind of test)

Cheers.
Miquel.

28
Installation and Upgrades / Re: No more internet access for my lan :-(
« on: September 02, 2011, 05:48:54 pm »
Definitely, this is a DNS issue.

Adding my router's ip (or my ISP DNS) as secondary nameserver workarounds the problem and my office machines can access again to internet.

So the real problem is that Zentyal DNS server is no longer able to resolve external addresses.

Should I rename this thread or open a new one?


29
Installation and Upgrades / Re: No more internet access for my lan :-(
« on: September 01, 2011, 07:43:11 pm »
CRISTIAN: This is an up to date Zentyal 2.0 box (DNS, NTP, DHCP, firewall, HTTP, Proxy, mail + webmail, VPN, backup, file sharing, user corner) and it's my production server.

MARCUS: a), b)* and c): YES

* Firewall, DHCP & Proxy are enabled in logs setup module. Is this what you mean?

Today's firewall log is 1342 pages with tons of DROPS (ports 631 and 5353). I don't now what else must I look for.

Thanks.
Miquel.







30
Installation and Upgrades / No more internet access for my lan :-(
« on: August 31, 2011, 11:44:09 pm »
I've installed and setup my Zentyal box two month ago and it has worked flawlesly until yesterday.

For any unknow reason, I've no more internet access for my lan since tomorrow morning (Zentyal box itself is not affected).

My Zentyal server has two network interfaces, eth0 (internal) and eth1 (external) and it runs some virtualbox machines attached to internal lan, wich still accessible (internally as well externally) as usual, so it's not a hardware issue.

It has worked fine for two monts and I've no made recent setup changes, so it's does not seems a "bug" in my setup.

Disabling proxy and/or firewall doesn't help.

Any suggestion about what should I check?

Unfortunately I havent backed up my full system, so what can I do? Is my only choice reinstall the full system and wait for a new break?

Thanks!
Miquel.

Pages: 1 [2] 3