This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
1
German / Re: HILFE! Wie kann ich ein offizelles StartSSL- Zertifikat einbinden
« on: April 18, 2016, 03:56:48 pm »2
German / Re: mail adress format
« on: April 20, 2015, 06:29:51 pm »
Super!
Nur mal so zum Nachdenken:
Andere sollen ihr Wissen mit die teilen (=deine Frage ins Forum). Find ich OK.
Du teilst dein Wissen aber offensichtlich nicht mit dem Forum (=deine Auflösung im Forum). Find ich NICHT OK.
Rosi
Nur mal so zum Nachdenken:
Andere sollen ihr Wissen mit die teilen (=deine Frage ins Forum). Find ich OK.
Du teilst dein Wissen aber offensichtlich nicht mit dem Forum (=deine Auflösung im Forum). Find ich NICHT OK.
Rosi
3
Installation and Upgrades / Re: Mail configuration Bug? Adding brackets to relayhost and voila!
« on: March 16, 2015, 09:44:31 am »
Hi!
What is your virtual domain?
I think the email domain is not the same.
To send email, you have to activate the relaying.
1. Network -> Objects -> Add new (e.g. Mailclients) -> then add new Members (your Subnet with the Mail-Client)
2. Mail Server -> Relay Policy for network objects -> add new (Pt.1 e.g. "Mailclients") and enable "allow Relay"
Rosi
What is your virtual domain?
I think the email domain is not the same.
To send email, you have to activate the relaying.
1. Network -> Objects -> Add new (e.g. Mailclients) -> then add new Members (your Subnet with the Mail-Client)
2. Mail Server -> Relay Policy for network objects -> add new (Pt.1 e.g. "Mailclients") and enable "allow Relay"
Rosi
4
Installation and Upgrades / Re: Internal server with multiple external addresses - Administration
« on: December 15, 2014, 04:24:08 pm »
Is it possible that one of the admins might say if my ideas in Zentyal ever go or not?
thanks
Rosi
thanks
Rosi
5
Installation and Upgrades / Re: How to Block HTTPS youtube
« on: December 04, 2014, 12:40:32 pm »
youtube.com has multiple ip addresses. all ips blocked by the firewall?
Name: youtube.com
Addresses: 2a00:1450:400d:806::1001
173.194.44.135
173.194.44.134
173.194.44.142
173.194.44.128
173.194.44.129
173.194.44.131
173.194.44.133
173.194.44.130
173.194.44.132
173.194.44.136
173.194.44.137
Rosi
Name: youtube.com
Addresses: 2a00:1450:400d:806::1001
173.194.44.135
173.194.44.134
173.194.44.142
173.194.44.128
173.194.44.129
173.194.44.131
173.194.44.133
173.194.44.130
173.194.44.132
173.194.44.136
173.194.44.137
Rosi
6
Installation and Upgrades / Internal server with multiple external addresses - Administration
« on: November 13, 2014, 03:48:00 pm »
I have an internal Zentyal Server 4.0 with the domain name server.zentyal.lan. The Zentyal server itself does not impose mail addresses for external use. It is provided in the internal network only for the management of external mail addresses from the users. These external mail addresses (eg user1@gmx.de, user1@hotmail.com etc.) should be collected with fetchmail and assigned to a user in the Zentyal server. At this external mail addresses also mail should be sent.
Can I set up in Zentyal, that the external mail-adresses (eg user1@hotmail.com) to the external domain (Hotmail server) to be delivered. If so, how do I do that? I do not get along with the description.
thanks
Rosi
01.12.2014: How can I my email addresses, such as, vorname.nachname@hotmail.com, user1@gmail.com etc, manage in Zentyal properly. I want to download emails from external domains to Zentyal with fetchmail and sent from that email addresses to other users on internet.
Sorry for my english (translate.google.com)
Can I set up in Zentyal, that the external mail-adresses (eg user1@hotmail.com) to the external domain (Hotmail server) to be delivered. If so, how do I do that? I do not get along with the description.
thanks
Rosi
01.12.2014: How can I my email addresses, such as, vorname.nachname@hotmail.com, user1@gmail.com etc, manage in Zentyal properly. I want to download emails from external domains to Zentyal with fetchmail and sent from that email addresses to other users on internet.
Sorry for my english (translate.google.com)
7
Installation and Upgrades / Re: Upgrade Zentyal 3.4 to 3.5: Total Fail
« on: July 31, 2014, 09:10:03 am »
I use Zentyal 3.4 as a KVM - guest in Proxmox as IMAP - mail server in the network, which fetches the mails with fetchmail with the respective providers. Zentyal is in no Windows domain.
Yesterday I had the ugrade-button from the dashboard availed to upgrade the system to version 3.5. Then I had to reboot the system.
I could login to the system after the reboot me, but realized that no users were present. The e-mails I could find in the folder. What can I say. I have availed a snapshot and made a rollback to Zentyal 3.4. That's it for me.
Maybe I'm doing it again a try, but the update to version 3.5 did not work for me. The users were no longer present.
Rosi
Please excuse my bad Engisch. I use --> https://translate.google.com
Yesterday I had the ugrade-button from the dashboard availed to upgrade the system to version 3.5. Then I had to reboot the system.
I could login to the system after the reboot me, but realized that no users were present. The e-mails I could find in the folder. What can I say. I have availed a snapshot and made a rollback to Zentyal 3.4. That's it for me.
Maybe I'm doing it again a try, but the update to version 3.5 did not work for me. The users were no longer present.
Rosi
Please excuse my bad Engisch. I use --> https://translate.google.com
8
German / Re: Keine Verbindung von Webmail zum Mailserver nach Community Updates
« on: May 19, 2014, 12:28:53 pm »Quote
edit: Hat sich erledigt. Hab's selbst gelöst.
Find' ich irgendwie toll, dass du das gelöst hast. Dass es ev. andere auch interessieren könnte, scheint dabei vergessen
Rosi
9
German / Re: Nach Update auf 3.4 ist Zentyal nicht via firefox erreichbar (Fehler 503)
« on: April 27, 2014, 08:04:12 pm »
Schau dir mal diesen Beitrag an -> https://forum.zentyal.org/index.php/topic,21499.msg83188.html#msg83188
Und solltest du noch Probleme mit dem User-Corner auf https://zentyal_ip:8888 haben, schau dir diesen Beitrag an -> https://forum.zentyal.org/index.php/topic,21500.msg83518.html#msg83518
Rosi
Und solltest du noch Probleme mit dem User-Corner auf https://zentyal_ip:8888 haben, schau dir diesen Beitrag an -> https://forum.zentyal.org/index.php/topic,21500.msg83518.html#msg83518
Rosi
10
Installation and Upgrades / Re: Upgrade to 3.4 E-Mail (fetchmail) don't work!!!
« on: April 27, 2014, 02:30:04 pm »However, I still get the error message in the usercorner when I click on "Mail retrieval from external accounts"
maybe a bug. see -> https://tracker.zentyal.org/issues/682
Rosi
Ps.: See -> https://github.com/Zentyal/zentyal/pull/1247/files#diff-1
1. I changed the files under
/var/lib/dpkg/info and
/usr/share/perl5/EBox/Mail/Model/
2. deactivate Modul user-corner
3. deinstall Modul user-corner
4. install Modul user-corner
5. activate Modul user-corner
and
6. it works for me
11
Installation and Upgrades / Re: Upgrade to 3.4 E-Mail (fetchmail) don't work!!!
« on: April 25, 2014, 05:51:08 pm »
The fix for this problem is to edit the /etc/passwd file, searching for the fetchmail user
If you find a line something like:
"fetchmail:x:148:65534::/var/lib/fetchmail:/bin/false"
replace the /bin/false with /bin/sh so that the daemon can execute, like so:
"fetchmail:x:148:65534::/var/lib/fetchmail:/bin/sh"
The fetchmail user will most likely have different user id and group ids - 148 and 65534. Nothing to worry about. Leave those as you found them.
than you may need to restart fetchmail:
"sudo service ebox.fetchmail restart"
This patch has work for me
Found on -> https://tracker.zentyal.org/issues/671 or https://forum.zentyal.org/index.php/topic,21633.0.html
Rosi
If you find a line something like:
"fetchmail:x:148:65534::/var/lib/fetchmail:/bin/false"
replace the /bin/false with /bin/sh so that the daemon can execute, like so:
"fetchmail:x:148:65534::/var/lib/fetchmail:/bin/sh"
The fetchmail user will most likely have different user id and group ids - 148 and 65534. Nothing to worry about. Leave those as you found them.
than you may need to restart fetchmail:
"sudo service ebox.fetchmail restart"
This patch has work for me
Found on -> https://tracker.zentyal.org/issues/671 or https://forum.zentyal.org/index.php/topic,21633.0.html
Rosi
12
Installation and Upgrades / Queue Management - when info to sender?
« on: April 24, 2014, 07:41:01 pm »
when the sender gets an info about the undelivered email in the queue management?
please see picture
Rosi
please see picture
Rosi
13
Installation and Upgrades / Re: After update to 3.4 - Nothing Working
« on: April 16, 2014, 07:06:56 am »
after the entry of "/etc/init.d/zentyal webadmin restart" i got the following output in /var/log/zentyal/zentyal.log:
2014/04/16 07:04:04 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /etc/init.d/zentyal webadmin restart (pid: 20311) - /sbin/status 'ebox.redis'
2014/04/16 07:04:04 INFO> Service.pm:995 EBox::Module::Service::restartService - Restarting service for module: webadmin
2014/04/16 07:04:06 DEBUG> Menu.pm:62 EBox::Menu::getKeywords - No model found for Users/Tree/Manage
2014/04/16 07:04:06 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /etc/init.d/zentyal webadmin restart (pid: 20311) - set -e
/bin/mv /var/lib/zentyal/tmp/bbeZLvqtKq '/var/lib/zentyal/conf/nginx.conf'
/bin/chmod 0644 '/var/lib/zentyal/conf/nginx.conf'
/bin/chown ebox.ebox '/var/lib/zentyal/conf/nginx.conf'
2014/04/16 07:04:06 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /etc/init.d/zentyal webadmin restart (pid: 20311) - set -e
/bin/mv /var/lib/zentyal/tmp/q1y7YARZxl '/etc/init/zentyal.webadmin-nginx.conf'
/bin/chmod 0644 '/etc/init/zentyal.webadmin-nginx.conf'
/bin/chown 0.0 '/etc/init/zentyal.webadmin-nginx.conf'
2014/04/16 07:04:06 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /etc/init.d/zentyal webadmin restart (pid: 20311) - set -e
/bin/mv /var/lib/zentyal/tmp/qBc_iViqHu '/etc/init/zentyal.webadmin-uwsgi.conf'
/bin/chmod 0644 '/etc/init/zentyal.webadmin-uwsgi.conf'
/bin/chown 0.0 '/etc/init/zentyal.webadmin-uwsgi.conf'
2014/04/16 07:04:06 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /etc/init.d/zentyal webadmin restart (pid: 20311) - set -e
/bin/mv /var/lib/zentyal/tmp/UbjkmkBn3I '/var/lib/zentyal/dynamicwww//css/public.css'
/bin/chmod 0644 '/var/lib/zentyal/dynamicwww//css/public.css'
/bin/chown 107.112 '/var/lib/zentyal/dynamicwww//css/public.css'
2014/04/16 07:04:06 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /etc/init.d/zentyal webadmin restart (pid: 20311) - set -e
/bin/mv /var/lib/zentyal/tmp/1cA9ZIFdv0 '/var/lib/zentyal/dynamicwww//css/login.css'
/bin/chmod 0644 '/var/lib/zentyal/dynamicwww//css/login.css'
/bin/chown 107.112 '/var/lib/zentyal/dynamicwww//css/login.css'
2014/04/16 07:04:06 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /etc/init.d/zentyal webadmin restart (pid: 20311) - set -e
/bin/mv /var/lib/zentyal/tmp/uT2xX8SnKx '/usr/share/zentyal/www//css/jquery-ui/jquery-ui.css'
/bin/chmod 0644 '/usr/share/zentyal/www//css/jquery-ui/jquery-ui.css'
/bin/chown 107.112 '/usr/share/zentyal/www//css/jquery-ui/jquery-ui.css'
2014/04/16 07:04:06 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /etc/init.d/zentyal webadmin restart (pid: 20311) - rm -f /var/lib/zentyal/tmp/webadmin_no_restart_on_trigger
2014/04/16 07:04:06 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /etc/init.d/zentyal webadmin restart (pid: 20311) - sed -i 's/^enabled=.*/enabled=1/' /etc/default/apport
2014/04/16 07:04:06 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /etc/init.d/zentyal webadmin restart (pid: 20311) - /sbin/status 'zentyal.webadmin-uwsgi'
2014/04/16 07:04:06 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /etc/init.d/zentyal webadmin restart (pid: 20311) - /sbin/stop 'zentyal.webadmin-uwsgi'
2014/04/16 07:04:06 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /etc/init.d/zentyal webadmin restart (pid: 20311) - /sbin/start 'zentyal.webadmin-uwsgi'
2014/04/16 07:04:06 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /etc/init.d/zentyal webadmin restart (pid: 20311) - /sbin/status 'zentyal.webadmin-nginx'
2014/04/16 07:04:06 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /etc/init.d/zentyal webadmin restart (pid: 20311) - /sbin/start 'zentyal.webadmin-nginx'
2014/04/16 07:04:06 ERROR> Sudo.pm:240 EBox::Sudo::_rootError - root command /sbin/start 'zentyal.webadmin-nginx' failed.
Error output: start: Job failed to start
Command output: .
Exit value: 1 at root command /sbin/start 'zentyal.webadmin-nginx' failed.
Error output: start: Job failed to start
Command output: .
Exit value: 1 at /usr/share/perl5/EBox/Sudo.pm line 240
EBox::Sudo::_rootError('/usr/bin/sudo -p sudo: /var/lib/zentyal/tmp/9s4z4lXeUW.cmd 2> /var/lib/zentyal/tmp/stderr', '/sbin/start \'zentyal.webadmin-nginx\'', 256, 'ARRAY(0xc63a374)', 'ARRAY(0x94fa7d4)') called at /usr/share/perl5/EBox/Sudo.pm line 210
EBox::Sudo::_root(1, '/sbin/start \'zentyal.webadmin-nginx\'') called at /usr/share/perl5/EBox/Sudo.pm line 153
EBox::Sudo::root('/sbin/start \'zentyal.webadmin-nginx\'') called at /usr/share/perl5/EBox/Service.pm line 52
EBox::Service::manage('zentyal.webadmin-nginx', 'restart') called at /usr/share/perl5/EBox/WebAdmin.pm line 118
EBox::WebAdmin::_manageNginx('EBox::WebAdmin=HASH(0xa0d7d98)', 'restart') called at /usr/share/perl5/EBox/WebAdmin.pm line 104
EBox::WebAdmin::_daemon('EBox::WebAdmin=HASH(0xa0d7d98)', 'restart') called at /usr/share/perl5/EBox/WebAdmin.pm line 182
EBox::WebAdmin::_enforceServiceState('EBox::WebAdmin=HASH(0xa0d7d98)', 'restart', 1, 'restartModules', 1) called at /usr/share/perl5/EBox/Module/Service.pm line 977
EBox::Module::Service::_regenConfig('EBox::WebAdmin=HASH(0xa0d7d98)', 'restart', 1, 'restartModules', 1) called at /usr/share/perl5/EBox/Module/Service.pm line 997
eval {...} at /usr/share/perl5/EBox/Module/Service.pm line 996
EBox::Module::Service::restartService('EBox::WebAdmin=HASH(0xa0d7d98)', 'restartModules', 1) called at /usr/share/perl5/EBox/Util/Init.pm line 129
eval {...} at /usr/share/perl5/EBox/Util/Init.pm line 127
EBox::Util::Init::moduleAction('webadmin', 'restartService', 'restart') called at /usr/share/perl5/EBox/Util/Init.pm line 255
EBox::Util::Init::moduleRestart('webadmin') called at /etc/init.d/zentyal line 58
main::main at /etc/init.d/zentyal line 79
2014/04/16 07:04:06 ERROR> Service.pm:999 EBox::Module::Service::restartService - Error restarting service: root command /sbin/start 'zentyal.webadmin-nginx' failed.
Error output: start: Job failed to start
Command output: .
Exit value: 1
2014/04/16 07:04:06 ERROR> Service.pm:1001 EBox::Module::Service::restartService - root command /sbin/start 'zentyal.webadmin-nginx' failed.
Error output: start: Job failed to start
Command output: .
Exit value: 1 at root command /sbin/start 'zentyal.webadmin-nginx' failed.
Error output: start: Job failed to start
Command output: .
Exit value: 1 at /usr/share/perl5/EBox/Module/Service.pm line 1001
EBox::Module::Service::restartService('EBox::WebAdmin=HASH(0xa0d7d98)', 'restartModules', 1) called at /usr/share/perl5/EBox/Util/Init.pm line 129
eval {...} at /usr/share/perl5/EBox/Util/Init.pm line 127
EBox::Util::Init::moduleAction('webadmin', 'restartService', 'restart') called at /usr/share/perl5/EBox/Util/Init.pm line 255
EBox::Util::Init::moduleRestart('webadmin') called at /etc/init.d/zentyal line 58
main::main at /etc/init.d/zentyal line 79
2014/04/16 07:04:04 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /etc/init.d/zentyal webadmin restart (pid: 20311) - /sbin/status 'ebox.redis'
2014/04/16 07:04:04 INFO> Service.pm:995 EBox::Module::Service::restartService - Restarting service for module: webadmin
2014/04/16 07:04:06 DEBUG> Menu.pm:62 EBox::Menu::getKeywords - No model found for Users/Tree/Manage
2014/04/16 07:04:06 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /etc/init.d/zentyal webadmin restart (pid: 20311) - set -e
/bin/mv /var/lib/zentyal/tmp/bbeZLvqtKq '/var/lib/zentyal/conf/nginx.conf'
/bin/chmod 0644 '/var/lib/zentyal/conf/nginx.conf'
/bin/chown ebox.ebox '/var/lib/zentyal/conf/nginx.conf'
2014/04/16 07:04:06 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /etc/init.d/zentyal webadmin restart (pid: 20311) - set -e
/bin/mv /var/lib/zentyal/tmp/q1y7YARZxl '/etc/init/zentyal.webadmin-nginx.conf'
/bin/chmod 0644 '/etc/init/zentyal.webadmin-nginx.conf'
/bin/chown 0.0 '/etc/init/zentyal.webadmin-nginx.conf'
2014/04/16 07:04:06 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /etc/init.d/zentyal webadmin restart (pid: 20311) - set -e
/bin/mv /var/lib/zentyal/tmp/qBc_iViqHu '/etc/init/zentyal.webadmin-uwsgi.conf'
/bin/chmod 0644 '/etc/init/zentyal.webadmin-uwsgi.conf'
/bin/chown 0.0 '/etc/init/zentyal.webadmin-uwsgi.conf'
2014/04/16 07:04:06 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /etc/init.d/zentyal webadmin restart (pid: 20311) - set -e
/bin/mv /var/lib/zentyal/tmp/UbjkmkBn3I '/var/lib/zentyal/dynamicwww//css/public.css'
/bin/chmod 0644 '/var/lib/zentyal/dynamicwww//css/public.css'
/bin/chown 107.112 '/var/lib/zentyal/dynamicwww//css/public.css'
2014/04/16 07:04:06 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /etc/init.d/zentyal webadmin restart (pid: 20311) - set -e
/bin/mv /var/lib/zentyal/tmp/1cA9ZIFdv0 '/var/lib/zentyal/dynamicwww//css/login.css'
/bin/chmod 0644 '/var/lib/zentyal/dynamicwww//css/login.css'
/bin/chown 107.112 '/var/lib/zentyal/dynamicwww//css/login.css'
2014/04/16 07:04:06 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /etc/init.d/zentyal webadmin restart (pid: 20311) - set -e
/bin/mv /var/lib/zentyal/tmp/uT2xX8SnKx '/usr/share/zentyal/www//css/jquery-ui/jquery-ui.css'
/bin/chmod 0644 '/usr/share/zentyal/www//css/jquery-ui/jquery-ui.css'
/bin/chown 107.112 '/usr/share/zentyal/www//css/jquery-ui/jquery-ui.css'
2014/04/16 07:04:06 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /etc/init.d/zentyal webadmin restart (pid: 20311) - rm -f /var/lib/zentyal/tmp/webadmin_no_restart_on_trigger
2014/04/16 07:04:06 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /etc/init.d/zentyal webadmin restart (pid: 20311) - sed -i 's/^enabled=.*/enabled=1/' /etc/default/apport
2014/04/16 07:04:06 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /etc/init.d/zentyal webadmin restart (pid: 20311) - /sbin/status 'zentyal.webadmin-uwsgi'
2014/04/16 07:04:06 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /etc/init.d/zentyal webadmin restart (pid: 20311) - /sbin/stop 'zentyal.webadmin-uwsgi'
2014/04/16 07:04:06 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /etc/init.d/zentyal webadmin restart (pid: 20311) - /sbin/start 'zentyal.webadmin-uwsgi'
2014/04/16 07:04:06 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /etc/init.d/zentyal webadmin restart (pid: 20311) - /sbin/status 'zentyal.webadmin-nginx'
2014/04/16 07:04:06 DEBUG> Sudo.pm:189 EBox::Sudo::_root - /etc/init.d/zentyal webadmin restart (pid: 20311) - /sbin/start 'zentyal.webadmin-nginx'
2014/04/16 07:04:06 ERROR> Sudo.pm:240 EBox::Sudo::_rootError - root command /sbin/start 'zentyal.webadmin-nginx' failed.
Error output: start: Job failed to start
Command output: .
Exit value: 1 at root command /sbin/start 'zentyal.webadmin-nginx' failed.
Error output: start: Job failed to start
Command output: .
Exit value: 1 at /usr/share/perl5/EBox/Sudo.pm line 240
EBox::Sudo::_rootError('/usr/bin/sudo -p sudo: /var/lib/zentyal/tmp/9s4z4lXeUW.cmd 2> /var/lib/zentyal/tmp/stderr', '/sbin/start \'zentyal.webadmin-nginx\'', 256, 'ARRAY(0xc63a374)', 'ARRAY(0x94fa7d4)') called at /usr/share/perl5/EBox/Sudo.pm line 210
EBox::Sudo::_root(1, '/sbin/start \'zentyal.webadmin-nginx\'') called at /usr/share/perl5/EBox/Sudo.pm line 153
EBox::Sudo::root('/sbin/start \'zentyal.webadmin-nginx\'') called at /usr/share/perl5/EBox/Service.pm line 52
EBox::Service::manage('zentyal.webadmin-nginx', 'restart') called at /usr/share/perl5/EBox/WebAdmin.pm line 118
EBox::WebAdmin::_manageNginx('EBox::WebAdmin=HASH(0xa0d7d98)', 'restart') called at /usr/share/perl5/EBox/WebAdmin.pm line 104
EBox::WebAdmin::_daemon('EBox::WebAdmin=HASH(0xa0d7d98)', 'restart') called at /usr/share/perl5/EBox/WebAdmin.pm line 182
EBox::WebAdmin::_enforceServiceState('EBox::WebAdmin=HASH(0xa0d7d98)', 'restart', 1, 'restartModules', 1) called at /usr/share/perl5/EBox/Module/Service.pm line 977
EBox::Module::Service::_regenConfig('EBox::WebAdmin=HASH(0xa0d7d98)', 'restart', 1, 'restartModules', 1) called at /usr/share/perl5/EBox/Module/Service.pm line 997
eval {...} at /usr/share/perl5/EBox/Module/Service.pm line 996
EBox::Module::Service::restartService('EBox::WebAdmin=HASH(0xa0d7d98)', 'restartModules', 1) called at /usr/share/perl5/EBox/Util/Init.pm line 129
eval {...} at /usr/share/perl5/EBox/Util/Init.pm line 127
EBox::Util::Init::moduleAction('webadmin', 'restartService', 'restart') called at /usr/share/perl5/EBox/Util/Init.pm line 255
EBox::Util::Init::moduleRestart('webadmin') called at /etc/init.d/zentyal line 58
main::main at /etc/init.d/zentyal line 79
2014/04/16 07:04:06 ERROR> Service.pm:999 EBox::Module::Service::restartService - Error restarting service: root command /sbin/start 'zentyal.webadmin-nginx' failed.
Error output: start: Job failed to start
Command output: .
Exit value: 1
2014/04/16 07:04:06 ERROR> Service.pm:1001 EBox::Module::Service::restartService - root command /sbin/start 'zentyal.webadmin-nginx' failed.
Error output: start: Job failed to start
Command output: .
Exit value: 1 at root command /sbin/start 'zentyal.webadmin-nginx' failed.
Error output: start: Job failed to start
Command output: .
Exit value: 1 at /usr/share/perl5/EBox/Module/Service.pm line 1001
EBox::Module::Service::restartService('EBox::WebAdmin=HASH(0xa0d7d98)', 'restartModules', 1) called at /usr/share/perl5/EBox/Util/Init.pm line 129
eval {...} at /usr/share/perl5/EBox/Util/Init.pm line 127
EBox::Util::Init::moduleAction('webadmin', 'restartService', 'restart') called at /usr/share/perl5/EBox/Util/Init.pm line 255
EBox::Util::Init::moduleRestart('webadmin') called at /etc/init.d/zentyal line 58
main::main at /etc/init.d/zentyal line 79
14
Installation and Upgrades / Re: After update to 3.4 - Nothing Working
« on: April 15, 2014, 01:31:29 pm »
root@zentyal:~# netstat -npl | grep 80
tcp 0 0 127.0.0.1:62080 0.0.0.0:* LISTEN 4026/apache2
tcp 0 0 127.0.0.1:6380 0.0.0.0:* LISTEN 1404/redis-server
tcp 0 0 192.168.10.6:8880 0.0.0.0:* LISTEN 3887/kdc
tcp 0 0 127.0.1.1:8880 0.0.0.0:* LISTEN 3887/kdc
tcp 0 0 127.0.0.1:8880 0.0.0.0:* LISTEN 3887/kdc
tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 3178/haproxy
udp 0 0 192.168.10.6:8880 0.0.0.0:* 3887/kdc
udp 0 0 127.0.1.1:8880 0.0.0.0:* 3887/kdc
udp 0 0 127.0.0.1:8880 0.0.0.0:* 3887/kdc
Rosi
tcp 0 0 127.0.0.1:62080 0.0.0.0:* LISTEN 4026/apache2
tcp 0 0 127.0.0.1:6380 0.0.0.0:* LISTEN 1404/redis-server
tcp 0 0 192.168.10.6:8880 0.0.0.0:* LISTEN 3887/kdc
tcp 0 0 127.0.1.1:8880 0.0.0.0:* LISTEN 3887/kdc
tcp 0 0 127.0.0.1:8880 0.0.0.0:* LISTEN 3887/kdc
tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 3178/haproxy
udp 0 0 192.168.10.6:8880 0.0.0.0:* 3887/kdc
udp 0 0 127.0.1.1:8880 0.0.0.0:* 3887/kdc
udp 0 0 127.0.0.1:8880 0.0.0.0:* 3887/kdc
Rosi
15
Installation and Upgrades / Re: After update to 3.4 - Nothing Working
« on: April 15, 2014, 11:18:34 am »
+1
found in /var/log/upstart/zentyal.webadmin-nginx.log
nginx: [emerg] unknown ""ssl_client_s_dn_o" variable
nginx: configuration file /var/lib/zentyal/confg/nginx.conf test failed
found in /var/log/nginx/error.log
[emerg] 12345#0: unknown ""ssl_client_s_dn_o" variable
..
[emerg] 1234#0 bind() to 0.0.0.0:80 failed (98: Adress already in use)
..
[emerg] 4321#0 still could not bind()
Rosi
found in /var/log/upstart/zentyal.webadmin-nginx.log
nginx: [emerg] unknown ""ssl_client_s_dn_o" variable
nginx: configuration file /var/lib/zentyal/confg/nginx.conf test failed
found in /var/log/nginx/error.log
[emerg] 12345#0: unknown ""ssl_client_s_dn_o" variable
..
[emerg] 1234#0 bind() to 0.0.0.0:80 failed (98: Adress already in use)
..
[emerg] 4321#0 still could not bind()
Rosi