This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
1
Installation and Upgrades / Re: Reports Logs HTTPProxy + SARG - Squid Analysis Report Generator
« on: September 30, 2011, 09:43:19 am »
Good Day
Some updates, the sarg.conf files lives at
#/etc/sarg/sarg.cong
When I run the sarg -l access.log command, I get the following
root@emp-srv01:~# vi /etc/sarg/sarg.conf
root@emp-srv01:~# sarg -l access.log
SARG: Unknown option site_user_time_date_type table
SARG: File not found: access.log
I have hashed out the entry in the sarg.conf file, then it worked..?? But there isnt much info in the access.log files, is this because it is a transparent proxy?
Some updates, the sarg.conf files lives at
#/etc/sarg/sarg.cong
When I run the sarg -l access.log command, I get the following
root@emp-srv01:~# vi /etc/sarg/sarg.conf
root@emp-srv01:~# sarg -l access.log
SARG: Unknown option site_user_time_date_type table
SARG: File not found: access.log
I have hashed out the entry in the sarg.conf file, then it worked..?? But there isnt much info in the access.log files, is this because it is a transparent proxy?
2
Installation and Upgrades / Re: Port Forwarding not working
« on: July 16, 2011, 08:27:40 pm »
Good Day
I have the following setup and I cannot get the port forwarding to work...
WAN---196.X.X.X---Zentyal---172.16.0.1 -------LAN --- SBS-SERVER ( 192.168.0.10 )
I Setup the Port forwarding on the WAN interface and configure the port forwarding, and it doenst work??
Do I have to configure the packet filtering information as well??
Shawn
I have the following setup and I cannot get the port forwarding to work...
WAN---196.X.X.X---Zentyal---172.16.0.1 -------LAN --- SBS-SERVER ( 192.168.0.10 )
I Setup the Port forwarding on the WAN interface and configure the port forwarding, and it doenst work??
Do I have to configure the packet filtering information as well??
Shawn
3
Installation and Upgrades / Zentyal - Updates today
« on: July 16, 2011, 07:37:26 pm »
Good day
I did the Zentyal updates today, with a bit of a problem...I got the following error, so I decided to reinstyall as I had all the settings, and I still get the same error
The following modules failed while saving their changes, their state is unknown: bwmonitor The following modules failed while saving their changes, their state is unknown: bwmonitor at /usr/share/perl5/EBox/Global.pm line 630 EBox::Global::saveAllModules('EBox::Global=HASH(0xafb3718)', 'progress', 'EBox::ProgressIndicator=HASH(0xafc0710)') called at /usr/share/zentyal/global-action line 39
Shawn
I did the Zentyal updates today, with a bit of a problem...I got the following error, so I decided to reinstyall as I had all the settings, and I still get the same error
The following modules failed while saving their changes, their state is unknown: bwmonitor The following modules failed while saving their changes, their state is unknown: bwmonitor at /usr/share/perl5/EBox/Global.pm line 630 EBox::Global::saveAllModules('EBox::Global=HASH(0xafb3718)', 'progress', 'EBox::ProgressIndicator=HASH(0xafc0710)') called at /usr/share/zentyal/global-action line 39
Shawn
4
Installation and Upgrades / Re: POP3 Connections being blocked
« on: July 16, 2011, 02:32:25 pm »
Good Day
I disabled these features and havent had any problems..??
Is this a bug?
Shawn
I disabled these features and havent had any problems..??
Is this a bug?
Shawn
5
Installation and Upgrades / POP3 Connections being blocked
« on: July 05, 2011, 03:11:05 pm »
Good Day
I have been using the Zentyal as a standard firewall at apartment building, every few days the users in the apartments cannot download mail ( POP mail ), and they get 0x800CCC0F errors and so forth, the support forums say its the Windows Firewall and AV, after looking at this for a few days, I rebooted the Zentyal, and their mail worked.
Mail was being blocked today, reboot server and immedialty the POP mail worked?
Any idea what I should look for?
Shawn
I have been using the Zentyal as a standard firewall at apartment building, every few days the users in the apartments cannot download mail ( POP mail ), and they get 0x800CCC0F errors and so forth, the support forums say its the Windows Firewall and AV, after looking at this for a few days, I rebooted the Zentyal, and their mail worked.
Mail was being blocked today, reboot server and immedialty the POP mail worked?
Any idea what I should look for?
Shawn
6
Installation and Upgrades / Re: Outlook and security Certificate
« on: May 21, 2011, 09:16:04 am »
Thats a "Yes" then??
7
Installation and Upgrades / Re: Outlook and security Certificate
« on: May 20, 2011, 06:51:39 am »
Thank you for the Info,
I would like to use the Zentyal Certificate, so do I import it into the root certificate section on Windows??
I would like to use the Zentyal Certificate, so do I import it into the root certificate section on Windows??
8
Installation and Upgrades / Re: Outlook and security Certificate
« on: May 19, 2011, 03:08:07 pm »
Good Day
Has nobody got a solution for this, as sometimes the pop up appears behind other windows and the users say they cant send out email
Shawn
Has nobody got a solution for this, as sometimes the pop up appears behind other windows and the users say they cant send out email
Shawn
9
Installation and Upgrades / Re: mail filter error (1.3.10)
« on: May 17, 2011, 08:13:18 am »
Good Day
I seem to be getting the same error, but I dont understand your resloution, and what accounts you created. I cannot send any emails from the Zentyal box, as per following logs
May 17 08:12:01 sbs-srv-sentinelle postfix/smtp[14408]: A9C592003E5: to=<shawn@testdomain.net>, relay=none, delay=0, delays=0/0/0/0, dsn=4.4.1, status=deferred (connect to 127.0.0.1[127.0.0.1]:10024: Connection refused).
I have tried to enable, disbale etc..the mailfilter..as per the above Posts, but still no luck.
I seem to be getting the same error, but I dont understand your resloution, and what accounts you created. I cannot send any emails from the Zentyal box, as per following logs
May 17 08:12:01 sbs-srv-sentinelle postfix/smtp[14408]: A9C592003E5: to=<shawn@testdomain.net>, relay=none, delay=0, delays=0/0/0/0, dsn=4.4.1, status=deferred (connect to 127.0.0.1[127.0.0.1]:10024: Connection refused).
I have tried to enable, disbale etc..the mailfilter..as per the above Posts, but still no luck.
10
Installation and Upgrades / Messages regarding the Kernel
« on: May 17, 2011, 08:00:36 am »
Good Day
in the /var/log/messages log file I get the following entries
May 17 07:55:40 sbs-srv-sentinelle kernel: [ 228.424387] Neighbour table overflow.
May 17 07:55:40 sbs-srv-sentinelle kernel: [ 228.424645] Neighbour table overflow.
May 17 07:55:40 sbs-srv-sentinelle kernel: [ 228.425253] Neighbour table overflow.
May 17 07:55:44 sbs-srv-sentinelle kernel: [ 232.410250] __ratelimit: 34 callbacks suppressed
May 17 07:55:44 sbs-srv-sentinelle kernel: [ 232.410253] Neighbour table overflow.
May 17 07:55:44 sbs-srv-sentinelle kernel: [ 232.410542] Neighbour table overflow.
May 17 07:55:44 sbs-srv-sentinelle kernel: [ 232.440782] Neighbour table overflow.
May 17 07:55:44 sbs-srv-sentinelle kernel: [ 232.441454] Neighbour table overflow.
May 17 07:55:44 sbs-srv-sentinelle kernel: [ 232.470806] Neighbour table overflow.
May 17 07:55:44 sbs-srv-sentinelle kernel: [ 232.670713] Neighbour table overflow.
May 17 07:55:44 sbs-srv-sentinelle kernel: [ 232.778939] Neighbour table overflow.
May 17 07:55:44 sbs-srv-sentinelle kernel: [ 233.188583] Neighbour table overflow.
May 17 07:55:45 sbs-srv-sentinelle kernel: [ 233.390485] Neighbour table overflow.
May 17 07:55:45 sbs-srv-sentinelle kernel: [ 233.391710] Neighbour table overflow.
I have done a search in Google, and iot talks about an overflow when the System acts as a proxy??
in the /var/log/messages log file I get the following entries
May 17 07:55:40 sbs-srv-sentinelle kernel: [ 228.424387] Neighbour table overflow.
May 17 07:55:40 sbs-srv-sentinelle kernel: [ 228.424645] Neighbour table overflow.
May 17 07:55:40 sbs-srv-sentinelle kernel: [ 228.425253] Neighbour table overflow.
May 17 07:55:44 sbs-srv-sentinelle kernel: [ 232.410250] __ratelimit: 34 callbacks suppressed
May 17 07:55:44 sbs-srv-sentinelle kernel: [ 232.410253] Neighbour table overflow.
May 17 07:55:44 sbs-srv-sentinelle kernel: [ 232.410542] Neighbour table overflow.
May 17 07:55:44 sbs-srv-sentinelle kernel: [ 232.440782] Neighbour table overflow.
May 17 07:55:44 sbs-srv-sentinelle kernel: [ 232.441454] Neighbour table overflow.
May 17 07:55:44 sbs-srv-sentinelle kernel: [ 232.470806] Neighbour table overflow.
May 17 07:55:44 sbs-srv-sentinelle kernel: [ 232.670713] Neighbour table overflow.
May 17 07:55:44 sbs-srv-sentinelle kernel: [ 232.778939] Neighbour table overflow.
May 17 07:55:44 sbs-srv-sentinelle kernel: [ 233.188583] Neighbour table overflow.
May 17 07:55:45 sbs-srv-sentinelle kernel: [ 233.390485] Neighbour table overflow.
May 17 07:55:45 sbs-srv-sentinelle kernel: [ 233.391710] Neighbour table overflow.
I have done a search in Google, and iot talks about an overflow when the System acts as a proxy??
11
Installation and Upgrades / Re: Internal Server Error
« on: May 17, 2011, 07:58:29 am »
Something really strange is going on..
I can get into the Dashboard now, a week after last trying to access it, but to configure the MAIL-GENERAL, I now get the following in the /var/log/ebox/error.log
Use of uninitialized value in concatenation (.) or string at /usr/share/perl5/EBox/Menu/Separator.pm line 44.
Use of uninitialized value in concatenation (.) or string at /usr/share/perl5/EBox/Menu/Separator.pm line 44.
Use of uninitialized value in concatenation (.) or string at /usr/share/perl5/HTML/Mason/Component/Subcomponent.pm line 34.
Use of uninitialized value in concatenation (.) or string at /usr/share/perl5/HTML/Mason/Component/Subcomponent.pm line 34.
hostname: Name or service not known
What does the hostname have to do with the Mail, nothing has changed?
I can get into the Dashboard now, a week after last trying to access it, but to configure the MAIL-GENERAL, I now get the following in the /var/log/ebox/error.log
Use of uninitialized value in concatenation (.) or string at /usr/share/perl5/EBox/Menu/Separator.pm line 44.
Use of uninitialized value in concatenation (.) or string at /usr/share/perl5/EBox/Menu/Separator.pm line 44.
Use of uninitialized value in concatenation (.) or string at /usr/share/perl5/HTML/Mason/Component/Subcomponent.pm line 34.
Use of uninitialized value in concatenation (.) or string at /usr/share/perl5/HTML/Mason/Component/Subcomponent.pm line 34.
hostname: Name or service not known
What does the hostname have to do with the Mail, nothing has changed?
12
Installation and Upgrades / Re: Internal Server Error
« on: May 11, 2011, 05:54:33 pm »
Good Day
Sorry for taking so long to respond, the server is working, but I cannot get into the dashboard..as per request
ii asterisk 1:1.6.2.7-1+ebox2 Open Source Private Branch Exchange (PBX)
ii asterisk-config 1:1.6.2.7-1+ebox2 Configuration files for Asterisk
ii asterisk-sounds-main 1:1.6.2.7-1+ebox2 Core Sound files for Asterisk (English)
ii ebox 2.0.19 Zentyal - Core
ii ebox-antivirus 2.0.5 Zentyal - Antivirus
ii ebox-ca 2.0.5 Zentyal - Certification Authority
ii ebox-dhcp 2.0.6 Zentyal - DHCP Service
ii ebox-dns 2.0.5 Zentyal - DNS Service
ii ebox-ebackup 2.0.12 Zentyal - Backup
ii ebox-firewall 2.0.3 Zentyal - Firewall
ii ebox-ftp 2.0.1 Zentyal - FTP
ii ebox-gateway 2.0-1 Zentyal - Gateway Suite
ii ebox-ids 2.0.1 Zentyal - Intrusion Detection System
ii ebox-infrastructure 2.0-1 Zentyal - Network Infrastructure Suite
ii ebox-l7-protocols 2.0 Zentyal - Layer-7 Filter
ii ebox-mail 2.0.6 Zentyal - Mail Service
ii ebox-mailfilter 2.0.2 Zentyal - Mail Filter
ii ebox-monitor 2.0.1 Zentyal - Monitor
ii ebox-network 2.0.8 Zentyal - Network Configuration
ii ebox-ntp 2.0.3 Zentyal - NTP Service
ii ebox-objects 2.0 Zentyal - Network Objects
ii ebox-office 2.0-1 Zentyal - Office Suite
ii ebox-openvpn 2.0.9 Zentyal - VPN Service
ii ebox-printers 2.0.3 Zentyal - Printer Sharing
ii ebox-radius 2.0 Zentyal - RADIUS
ii ebox-remoteservices 2.0.15 Zentyal - Zentyal Cloud Client
ii ebox-samba 2.0.10 Zentyal - File Sharing
ii ebox-security 2.0-1 Zentyal - UTM Suite
ii ebox-services 2.0 Zentyal - Network Services
ii ebox-software 2.0.10 Zentyal - Software Management
ii ebox-squid 2.0.6 Zentyal - HTTP Proxy (Cache and Content Filt
ii ebox-trafficshaping 2.0.3 Zentyal - Traffic Shaping
ii ebox-usersandgroups 2.0.12 Zentyal - Users and Groups
ii ebox-webmail 2.0.1 Zentyal - Web Mail Service
ii ebox-webserver 2.0.5 Zentyal - Web Server
ii ebox-zarafa 2.0.5 Zentyal - Groupware (Zarafa)
ii john 1.7.6-1~ebox0~lucid0 active password cracking tool
ii john-data 1.7.6-1~ebox0~lucid0 active password cracking tool - character se
ii libebox 2.0.10 Zentyal - Common Library
ii p3scan 2:2.3.2-7ubuntu1+ebox1 transparent POP3-proxy with virus- and spam-
ii roundcube 0.3.1-3ubuntu1~ebox2~lucid1 skinnable AJAX based webmail solution for IM
ii roundcube-core 0.3.1-3ubuntu1~ebox2~lucid1 skinnable AJAX based webmail solution for IM
ii roundcube-pgsql 0.3.1-3ubuntu1~ebox2~lucid1 metapackage providing PostgreSQL dependencie
ii roundcube-sqlite 0.3.1-3ubuntu1~ebox2~lucid1 metapackage providing sqlite dependencies fo
ii samba-vscan 0.3.6cbeta5ebox4-2 Samba virus scanning VFS module
root@sbs-srv:~#
Sorry for taking so long to respond, the server is working, but I cannot get into the dashboard..as per request
ii asterisk 1:1.6.2.7-1+ebox2 Open Source Private Branch Exchange (PBX)
ii asterisk-config 1:1.6.2.7-1+ebox2 Configuration files for Asterisk
ii asterisk-sounds-main 1:1.6.2.7-1+ebox2 Core Sound files for Asterisk (English)
ii ebox 2.0.19 Zentyal - Core
ii ebox-antivirus 2.0.5 Zentyal - Antivirus
ii ebox-ca 2.0.5 Zentyal - Certification Authority
ii ebox-dhcp 2.0.6 Zentyal - DHCP Service
ii ebox-dns 2.0.5 Zentyal - DNS Service
ii ebox-ebackup 2.0.12 Zentyal - Backup
ii ebox-firewall 2.0.3 Zentyal - Firewall
ii ebox-ftp 2.0.1 Zentyal - FTP
ii ebox-gateway 2.0-1 Zentyal - Gateway Suite
ii ebox-ids 2.0.1 Zentyal - Intrusion Detection System
ii ebox-infrastructure 2.0-1 Zentyal - Network Infrastructure Suite
ii ebox-l7-protocols 2.0 Zentyal - Layer-7 Filter
ii ebox-mail 2.0.6 Zentyal - Mail Service
ii ebox-mailfilter 2.0.2 Zentyal - Mail Filter
ii ebox-monitor 2.0.1 Zentyal - Monitor
ii ebox-network 2.0.8 Zentyal - Network Configuration
ii ebox-ntp 2.0.3 Zentyal - NTP Service
ii ebox-objects 2.0 Zentyal - Network Objects
ii ebox-office 2.0-1 Zentyal - Office Suite
ii ebox-openvpn 2.0.9 Zentyal - VPN Service
ii ebox-printers 2.0.3 Zentyal - Printer Sharing
ii ebox-radius 2.0 Zentyal - RADIUS
ii ebox-remoteservices 2.0.15 Zentyal - Zentyal Cloud Client
ii ebox-samba 2.0.10 Zentyal - File Sharing
ii ebox-security 2.0-1 Zentyal - UTM Suite
ii ebox-services 2.0 Zentyal - Network Services
ii ebox-software 2.0.10 Zentyal - Software Management
ii ebox-squid 2.0.6 Zentyal - HTTP Proxy (Cache and Content Filt
ii ebox-trafficshaping 2.0.3 Zentyal - Traffic Shaping
ii ebox-usersandgroups 2.0.12 Zentyal - Users and Groups
ii ebox-webmail 2.0.1 Zentyal - Web Mail Service
ii ebox-webserver 2.0.5 Zentyal - Web Server
ii ebox-zarafa 2.0.5 Zentyal - Groupware (Zarafa)
ii john 1.7.6-1~ebox0~lucid0 active password cracking tool
ii john-data 1.7.6-1~ebox0~lucid0 active password cracking tool - character se
ii libebox 2.0.10 Zentyal - Common Library
ii p3scan 2:2.3.2-7ubuntu1+ebox1 transparent POP3-proxy with virus- and spam-
ii roundcube 0.3.1-3ubuntu1~ebox2~lucid1 skinnable AJAX based webmail solution for IM
ii roundcube-core 0.3.1-3ubuntu1~ebox2~lucid1 skinnable AJAX based webmail solution for IM
ii roundcube-pgsql 0.3.1-3ubuntu1~ebox2~lucid1 metapackage providing PostgreSQL dependencie
ii roundcube-sqlite 0.3.1-3ubuntu1~ebox2~lucid1 metapackage providing sqlite dependencies fo
ii samba-vscan 0.3.6cbeta5ebox4-2 Samba virus scanning VFS module
root@sbs-srv:~#
13
Installation and Upgrades / Re: Internal Server Error
« on: May 04, 2011, 01:17:14 pm »
Good Day
I am having the same problem..I cant get into the dashboard
Use of uninitialized value in concatenation (.) or string at /usr/share/perl5/HTML/Mason/Component/Subcomponent.pm line 34.
Argument "" isn't numeric in numeric lt (<) at /usr/share/perl5/EBox/Model/DataTable.pm line 2900, <GEN1> line 44272.
Use of uninitialized value in concatenation (.) or string at /usr/share/perl5/HTML/Mason/Component/Subcomponent.pm line 34.
Use of uninitialized value in concatenation (.) or string at /usr/share/perl5/HTML/Mason/Component/Subcomponent.pm line 34.
Use of uninitialized value $currentSeparator in string ne at /usr/share/perl5/EBox/Menu/Root.pm line 51.
Use of uninitialized value in concatenation (.) or string at /usr/share/perl5/EBox/Menu/Separator.pm line 44.
Use of uninitialized value in concatenation (.) or string at /usr/share/perl5/EBox/Menu/Separator.pm line 44.
Use of uninitialized value in concatenation (.) or string at /usr/share/perl5/EBox/Menu/Separator.pm line 44.
Use of uninitialized value in concatenation (.) or string at /usr/share/perl5/EBox/Menu/Separator.pm line 44.
Use of uninitialized value in concatenation (.) or string at /usr/share/perl5/EBox/Menu/Separator.pm line 44.
Use of uninitialized value in concatenation (.) or string at /usr/share/perl5/EBox/Menu/Separator.pm line 44.
Use of uninitialized value in concatenation (.) or string at /usr/share/perl5/HTML/Mason/Component/Subcomponent.pm line 34.
Use of uninitialized value in concatenation (.) or string at /usr/share/perl5/HTML/Mason/Component/Subcomponent.pm line 34.
I am having the same problem..I cant get into the dashboard
Use of uninitialized value in concatenation (.) or string at /usr/share/perl5/HTML/Mason/Component/Subcomponent.pm line 34.
Argument "" isn't numeric in numeric lt (<) at /usr/share/perl5/EBox/Model/DataTable.pm line 2900, <GEN1> line 44272.
Use of uninitialized value in concatenation (.) or string at /usr/share/perl5/HTML/Mason/Component/Subcomponent.pm line 34.
Use of uninitialized value in concatenation (.) or string at /usr/share/perl5/HTML/Mason/Component/Subcomponent.pm line 34.
Use of uninitialized value $currentSeparator in string ne at /usr/share/perl5/EBox/Menu/Root.pm line 51.
Use of uninitialized value in concatenation (.) or string at /usr/share/perl5/EBox/Menu/Separator.pm line 44.
Use of uninitialized value in concatenation (.) or string at /usr/share/perl5/EBox/Menu/Separator.pm line 44.
Use of uninitialized value in concatenation (.) or string at /usr/share/perl5/EBox/Menu/Separator.pm line 44.
Use of uninitialized value in concatenation (.) or string at /usr/share/perl5/EBox/Menu/Separator.pm line 44.
Use of uninitialized value in concatenation (.) or string at /usr/share/perl5/EBox/Menu/Separator.pm line 44.
Use of uninitialized value in concatenation (.) or string at /usr/share/perl5/EBox/Menu/Separator.pm line 44.
Use of uninitialized value in concatenation (.) or string at /usr/share/perl5/HTML/Mason/Component/Subcomponent.pm line 34.
Use of uninitialized value in concatenation (.) or string at /usr/share/perl5/HTML/Mason/Component/Subcomponent.pm line 34.
Pages: [1]