Recent Posts
1
Russian / Re: Zentyal 7.0 и статический адрес провайдера
« Last post by luha on Today at 09:50:03 am »Нужно указать каким сервером DNS будет пользоваться сам зенчал и настроить пересылку. В закладке DNS в секцию "Forwarder" вписать внешний сервер (8.8.8.8 и 1.1.1.1 или провайдерский чтоб тов.майора порадовать).
2
Directory and Authentication / veto files - exception for a department
« Last post by juliocp1976 on March 28, 2023, 01:43:04 pm »Hello, I'm using Zentyal 7 as a file server (File Sharing).
I need to apply VETO FILES parameter but not on all shared directories of my fileserver.
########## GENERAL (hr, finance, inventory)
veto files = /*.mp3/Thumbs.db/*.3gp/*.avi/*.mkv/*.flv/*.exe/*.bat/*.ini/
But there are some directories that are shared on the fileserver, for example, they could record MP3 files
Board, Audio Department, IT...
I didn't find anything in the /usr/share/zentyal/stubs/samba/smb.conf.mas or /usr/share/zentyal/stubs/samba/shares.conf.mas file
where could I locate the directory I want to select. Because it's no use putting it in the already compiled files /etc/samba/shares.conf
When I enable this parameter in veto files = /*.mp3/Thumbs.db/*.3gp/*.avi/*.mkv/*.flv/*.exe/*.bat/*.ini/ in config file /usr/share/zentyal/stubs/samba/smb.conf.but Samba applies to all
Does anyone know what it could be and how to fix it.
Thanks
I need to apply VETO FILES parameter but not on all shared directories of my fileserver.
########## GENERAL (hr, finance, inventory)
veto files = /*.mp3/Thumbs.db/*.3gp/*.avi/*.mkv/*.flv/*.exe/*.bat/*.ini/
But there are some directories that are shared on the fileserver, for example, they could record MP3 files
Board, Audio Department, IT...
I didn't find anything in the /usr/share/zentyal/stubs/samba/smb.conf.mas or /usr/share/zentyal/stubs/samba/shares.conf.mas file
where could I locate the directory I want to select. Because it's no use putting it in the already compiled files /etc/samba/shares.conf
When I enable this parameter in veto files = /*.mp3/Thumbs.db/*.3gp/*.avi/*.mkv/*.flv/*.exe/*.bat/*.ini/ in config file /usr/share/zentyal/stubs/samba/smb.conf.but Samba applies to all
Does anyone know what it could be and how to fix it.
Thanks
3
Russian / Re: Zentyal 7.0 и статический адрес провайдера
« Last post by IIS on March 23, 2023, 06:47:58 am »Клиенты сети получают ip с зенчела у них в качестве DNS сервера указан сам зенчал. и это правильно. беда в том что с самого сервера ничго по имени не пингуется а по ip все ок.
я так понимаю неправильно настроен DNS на сервере. Но как его правильно настроить? желательо на примере
я так понимаю неправильно настроен DNS на сервере. Но как его правильно настроить? желательо на примере
4
Portuguese / veto files no Compartilhamento
« Last post by juliocp1976 on March 22, 2023, 07:37:39 pm »Olá, estou usando como file server (Compartilhamento de Arquivos) o Zentyal 7 .
preciso aplicar o parâmetro VETO FILES, mas não em todos os diretórios compartilhados do meu fileserver.
########## GERAL (rh, financeiro, estoque)
veto files = /*.mp3/Thumbs.db/*.3gp/*.avi/*.mkv/*.flv/*.exe/*.bat/*.ini/
Mas tem alguns diretórios que são compartilhados no fileserver por exemplo poderiam gravar arquivos MP3
Diretoria, Departamento de Áudio, TI ...
Não achei nada no arquivo /usr/share/zentyal/stubs/samba/smb.conf.mas ou /usr/share/zentyal/stubs/samba/shares.conf.mas
onde eu poderia localizar o diretório que eu queira selecionar. Pois nao adianta colocar nos arquivos ja compilados /etc/samba/shares.conf
Quando eu ativo esse parâmetro no veto files = /*.mp3/Thumbs.db/*.3gp/*.avi/*.mkv/*.flv/*.exe/*.bat/*.ini/ no arquivo de configuração /usr/share/zentyal/stubs/samba/smb.conf.mas o Samba aplica para todos
Alguém sabe o que pode ser e como resolver.
Obrigado
preciso aplicar o parâmetro VETO FILES, mas não em todos os diretórios compartilhados do meu fileserver.
########## GERAL (rh, financeiro, estoque)
veto files = /*.mp3/Thumbs.db/*.3gp/*.avi/*.mkv/*.flv/*.exe/*.bat/*.ini/
Mas tem alguns diretórios que são compartilhados no fileserver por exemplo poderiam gravar arquivos MP3
Diretoria, Departamento de Áudio, TI ...
Não achei nada no arquivo /usr/share/zentyal/stubs/samba/smb.conf.mas ou /usr/share/zentyal/stubs/samba/shares.conf.mas
onde eu poderia localizar o diretório que eu queira selecionar. Pois nao adianta colocar nos arquivos ja compilados /etc/samba/shares.conf
Quando eu ativo esse parâmetro no veto files = /*.mp3/Thumbs.db/*.3gp/*.avi/*.mkv/*.flv/*.exe/*.bat/*.ini/ no arquivo de configuração /usr/share/zentyal/stubs/samba/smb.conf.mas o Samba aplica para todos
Alguém sabe o que pode ser e como resolver.
Obrigado
5
Russian / Re: Zentyal 7.0 и статический адрес провайдера
« Last post by luha on March 22, 2023, 02:07:05 pm »Нужно проверить настройки DHCP сервера, а точнее какой там указан сервер DNS. На компьютере пользователя посмотреть свойства подключения на тот же предмет поиска.
6
Russian / Re: Zentyal 7.0 и статический адрес провайдера
« Last post by IIS on March 22, 2023, 01:57:37 pm »Понятно что к DNS.
У меня в работе 5я версия там все работает. в 7й настроил по аналогии и не работает
У меня в работе 5я версия там все работает. в 7й настроил по аналогии и не работает
7
Russian / Re: Zentyal 7.0 и статический адрес провайдера
« Last post by luha on March 22, 2023, 09:09:04 am »Если по имени не пингуется а по ip пингуется то это к DNS.
8
Russian / Zentyal 7.0 и статический адрес провайдера
« Last post by IIS on March 21, 2023, 09:05:36 pm »Приветствую
Объясните как правильно настроить сервер в качестве интернет шлюза.
провайдер смотрит со стороны eth2 ip статический 17.22.22.10
eth1 смотрит в локалку на нем адрес 192.168.1.1 настроен dhcp клиенты ip получают сервер видят
но инета нет, по имени не пингуются внешние ресурсы.(ya.ru) а по ip пингуются.
На самом сервере ситуация аналогичная.
Объясните как правильно настроить сервер в качестве интернет шлюза.
провайдер смотрит со стороны eth2 ip статический 17.22.22.10
eth1 смотрит в локалку на нем адрес 192.168.1.1 настроен dhcp клиенты ip получают сервер видят
но инета нет, по имени не пингуются внешние ресурсы.(ya.ru) а по ip пингуются.
На самом сервере ситуация аналогичная.
9
Installation and Upgrades / Zentyal Server stopped working
« Last post by Faisal Abbas on March 20, 2023, 02:12:48 pm »Dear Support Team,
My Zentyal Server is not working, i have followed your previous link and change stderr to stdout in Ldap.pm file, then after restart i am getting below error in zentyal.log file
2023/03/20 18:05:58 INFO> SyncDaemon.pm:340 EBox::Samba::SyncDaemon::run - Samba sync daemon started
2023/03/20 18:05:59 ERROR> Ldap.pm:257 EBox::Ldap::dn - Error loading LDIF. Error message: First line tered
GENSEC backend 'gssapi_krb5' registered
GENSEC backend 'gssapi_krb5_sasl' registered
GENSEC backend 'spnego' registered
GENSEC backend 'schannel' registered
GENSEC backend 'naclrpc_as_system' registered
GENSEC backend 'sasl-EXTERNAL' registered
GENSEC backend 'ntlmssp' registered
GENSEC backend 'ntlmssp_resume_ccache' registered
GENSEC backend 'http_basic' registered
GENSEC backend 'http_ntlm' registered
GENSEC backend 'http_negotiate' registered
GENSEC backend 'krb5' registered
GENSEC backend 'fake_gssapi_krb5' registered
dn: DC=sapphirecs,DC=net at Error loading LDIF. Error message: First line of LDIF entry does not begin
GENSEC backend 'gssapi_krb5' registered
GENSEC backend 'gssapi_krb5_sasl' registered
GENSEC backend 'spnego' registered
GENSEC backend 'schannel' registered
GENSEC backend 'naclrpc_as_system' registered
GENSEC backend 'sasl-EXTERNAL' registered
GENSEC backend 'ntlmssp' registered
GENSEC backend 'ntlmssp_resume_ccache' registered
GENSEC backend 'http_basic' registered
GENSEC backend 'http_ntlm' registered
GENSEC backend 'http_negotiate' registered
GENSEC backend 'krb5' registered
GENSEC backend 'fake_gssapi_krb5' registered
dn: DC=sapphirecs,DC=net at /usr/share/perl5/EBox/Ldap.pm line 257
EBox::Ldap::dn('EBox::Ldap=HASH(0x562f45578010)') called at /usr/share/perl5/EBox/Ldap.pm line 293
EBox::Ldap::domainSID('EBox::Ldap=HASH(0x562f45578010)') called at /usr/share/perl5/EBox/Samba/SyncDae
EBox::Samba::SyncDaemon::setACLs('EBox::Samba::SyncDaemon=HASH(0x562f455a71d8)') called at /usr/share/
EBox::Samba::SyncDaemon::run('EBox::Samba::SyncDaemon=HASH(0x562f455a71d8)', 30, 10) called at /usr/sh
2023/03/20 18:06:04 INFO> SyncDaemon.pm:340 EBox::Samba::SyncDaemon::run - Samba sync daemon started
^C
Kindy Help.
My Zentyal Server is not working, i have followed your previous link and change stderr to stdout in Ldap.pm file, then after restart i am getting below error in zentyal.log file
2023/03/20 18:05:58 INFO> SyncDaemon.pm:340 EBox::Samba::SyncDaemon::run - Samba sync daemon started
2023/03/20 18:05:59 ERROR> Ldap.pm:257 EBox::Ldap::dn - Error loading LDIF. Error message: First line tered
GENSEC backend 'gssapi_krb5' registered
GENSEC backend 'gssapi_krb5_sasl' registered
GENSEC backend 'spnego' registered
GENSEC backend 'schannel' registered
GENSEC backend 'naclrpc_as_system' registered
GENSEC backend 'sasl-EXTERNAL' registered
GENSEC backend 'ntlmssp' registered
GENSEC backend 'ntlmssp_resume_ccache' registered
GENSEC backend 'http_basic' registered
GENSEC backend 'http_ntlm' registered
GENSEC backend 'http_negotiate' registered
GENSEC backend 'krb5' registered
GENSEC backend 'fake_gssapi_krb5' registered
dn: DC=sapphirecs,DC=net at Error loading LDIF. Error message: First line of LDIF entry does not begin
GENSEC backend 'gssapi_krb5' registered
GENSEC backend 'gssapi_krb5_sasl' registered
GENSEC backend 'spnego' registered
GENSEC backend 'schannel' registered
GENSEC backend 'naclrpc_as_system' registered
GENSEC backend 'sasl-EXTERNAL' registered
GENSEC backend 'ntlmssp' registered
GENSEC backend 'ntlmssp_resume_ccache' registered
GENSEC backend 'http_basic' registered
GENSEC backend 'http_ntlm' registered
GENSEC backend 'http_negotiate' registered
GENSEC backend 'krb5' registered
GENSEC backend 'fake_gssapi_krb5' registered
dn: DC=sapphirecs,DC=net at /usr/share/perl5/EBox/Ldap.pm line 257
EBox::Ldap::dn('EBox::Ldap=HASH(0x562f45578010)') called at /usr/share/perl5/EBox/Ldap.pm line 293
EBox::Ldap::domainSID('EBox::Ldap=HASH(0x562f45578010)') called at /usr/share/perl5/EBox/Samba/SyncDae
EBox::Samba::SyncDaemon::setACLs('EBox::Samba::SyncDaemon=HASH(0x562f455a71d8)') called at /usr/share/
EBox::Samba::SyncDaemon::run('EBox::Samba::SyncDaemon=HASH(0x562f455a71d8)', 30, 10) called at /usr/sh
2023/03/20 18:06:04 INFO> SyncDaemon.pm:340 EBox::Samba::SyncDaemon::run - Samba sync daemon started
^C
Kindy Help.
10
Installation and Upgrades / Re: ZENTYAL CONFIGURATION BACKUP ERROR
« Last post by turalyon on March 20, 2023, 12:28:36 pm »That bug was reported and fixed last week. You must update the domain controller package to 'zentyal-samba-7.0.2'. In case you do not have that update available is because you do not have access to the Zentyal repository. You can confirm it by running the following command:
If this is the case, below you have a link where the required actions are explained:
* https://forum.zentyal.org/index.php/topic,35100.msg115467.html#msg115467
--
“This world is ours, and by the Holy Light we will keep it safe, now and forever".
Code: [Select]
sudo apt update
If this is the case, below you have a link where the required actions are explained:
* https://forum.zentyal.org/index.php/topic,35100.msg115467.html#msg115467
--
“This world is ours, and by the Holy Light we will keep it safe, now and forever".