Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Sycoriorz

Pages: [1]
1
Installation and Upgrades / Re: can't log in Webadmin
« on: September 13, 2021, 08:57:51 am »
Dear,

i got this same issue.

Fresh installation but restored out of an Backup.
This backup was created from an old 5.1 Server which was updated till 7.0.
After finished update i create an Backup and has done an fresh install with restore

regards


2
Installation and Upgrades / Re: Upgrade from 4.2 to 5.0
« on: March 19, 2018, 07:06:04 pm »
i worked on this issue also for a long time.
I fixed this and go a different way.
Make an fresh installation of Zentyal 5.0.1 (this is an new Version - in 5.0 it does not works) in VBox or VmWare.
Do an Bakup of 4.2 and restore it to 5.0.1 in VM.
After that you can do a backup of the VM with CloneZilla and restore this to an new HDD.
For that you will find a lot of tutorials with google.
Place this HDD in your computer.
If this dont works you have an running system based on 4.2 on your old HDD without any risk.

regards

3
Installation and Upgrades / Re: problem with the pam_cap.so file
« on: March 19, 2018, 06:58:07 pm »
i've got the same problem.
Nobody has an idea?

4
German / Re: site-to-site VPN Zentyal
« on: March 19, 2018, 06:49:02 pm »
Hallo,

wenn ich es richtig verstehe können die Clients von Server A nicht auf die Clients von Server B zugreifen.
Ich gehe davon aus, dass bei deiner Config Server A der Server ist und Server B als Client angebunden ist mit der site-to-site connection.

Ich habe einen identischen Aufbau. Damit es klappt musst du ein neues Objekt in Netzwerk unter Server A anlegen.
Nennen wir es ServerB. In diesem Objekt muss ein neues Mitglied angelegt werden. Name NetzwerkB
Hier gibst du dann als Ip-Adresse dein Netzwerkbereich von ServerB an.
Beispielsweise 10.20.1.0/24

Dann im Anschluß unter VPN->Server->Verfügbare Netzwerke  das so eben erstellte Objekt hinzufügen.

Ab jetzt sollte jede Kommunikation zwischen allen Clients von ServerA zu ServerB und umgekehrt funktionieren.

Ich hoffe dir hats geholfen.

Gruß

Sycoriorz

5
German / Re: Backup 4.1 -> restore 5.0
« on: March 19, 2018, 06:34:37 pm »
Ich habe selbst viel probiert und habe eine Lösung für meinen Fall gefunden.
Das Problem war das Antivirus Modul.
Nachdem ich Zentyal 5.0.1 frisch aufgesetzt habe, habe ich alle benötigte Module installiert.
Das Antivirus Modul habe ich nicht mit installiert. Anschließend verlief der restore aus dem 4.1 Backup ohne Probleme.

Eventuel hilft es jemanden

Gruß



6
Dear at all,

i've got an problem since updating from 4.1 to 5.0.1.
Sometimes the webaccess dont works anymore and get loss for 1 or 5 minutes.
A ping to 8.8.8.8 works
A ping to www.google.de does not work.
I tried to restart dns or dhcp but without any effect.
If i do the ping from command line in zentyalserver it is the same as i do it from an client in zentyal network.
I use also a site-to-site connection of two zentyal servers.
This connection does not aborts.
It seems to be a name service problem.

Anyone has some idea to fix this?
I was looking for an log file but i didnt found the right logfile.
Which file could help me?

Many thanks

regards

sycoriorz

7
Installation and Upgrades / Backup 4.1 -> restore 5.0
« on: February 14, 2017, 02:24:06 pm »
Hello at all,

i have following problem.
I try to upgrade from Zentyal 4.1 to 5.0, but without success.
At first i tried with the button "update" at backend. It runs to an error, and the system crashes with an kernel error.
My second step was an fresh installation of Zentyal 5.0 in vbox. I want to do an restore from the backup 4.1.
It dont works because the backup manager dont allows an restore from an older version.

My problem is i dont know any way to upgrade without an new configuration of all in fresh installation.
But i dont want to do this.

Maybe there is a way to export the configuration manually from 4.1 and restore this manually back to 5.0.
Or someone can check my infromations if i need a newer version of adons for automatic update:

Antivirus                      4.1    
Certification Authority      4.1    
Common Library      4.1.1    
Core                          4.1.12    
DHCP Server              4.1.1.61    
DNS Server              4.1.0.61    
Domain Controller and File Sharing    4.1.5    
Firewall                      4.1.1    
NTP Service              4.1    
Network Configuration   4.1.1    
Network Objects      4.1    
Network Services      4.1    
Software Management   4.1.1    
VPN                              4.1.1.61

sorry for my bad english.
Many thanks for your help.

best regards

8
Hi,

this is an problem regarding 16.04 LTS. While booting the system change the name from eth to en.
But it is possible to change this to the old names.
It exist an very good tutorial here:

http://www.itzgeek.com/how-tos/mini-howtos/change-default-network-name-ens33-to-old-eth0-on-ubuntu-16-04.html

Best regards




9
German / <solved> Backup 4.1 -> restore 5.0
« on: February 13, 2017, 04:18:24 pm »
Hallo an alle,

ich habe folgendes Problem.

Mein eingerichtetes System läuft im Moment auf Zentyal 4.1 und ich möchte auf 5.0 umstellen.
Dort verwalte ich in der Domäne ca 20 Nutzer. Auserdem ist per Site-to-Site ein zweiter Standort mit angebunden. Ein Update auf 5.0 war über die Routine nicht möglich. Hier läuft er auf Fehler und das ganze System ist anschließend nicht mehr bootfähig.

Deshalb hatte ich versucht in der Vbox ein neues System 5.0 aufzusetzen um anschließend das Backup von 4.1 über den Punkt "Konfigutation sichern" einzuspielen.
Jedoch war dies aufgrund der unterschiedlichen Versionen nicht möglich.

Ich würde nur ungern den kompletten Server neu aufsetzen.
Gibt es eine Möglichkeit die Serverkonfiguration manuell umzuziehen?
Wenn ja, hat hier bereits jemand Erfahrungen bezgl 14.04 Konfig -> 16.04 Konfig?

Ziel wäre es eigentlich in ein frisch installiertes 5.0 Zentyal die Konfig einzuspielen um anschließend direkt mit der neuen Version live gehen zu können.
Ich hoffe mir kann jemand bei diesem Problem helfen.

Danke für eure Hilfe.

Mfg
Sycoriorz

10
Hello Shugarie,

i had the same problem like you. I tried to install zentyal 4.1 in vbox. The system stuck after installation reboot by zentyal core packages.
I found following solution.
Plugoff the network wire before reboot.
Zentyal tries to connect the network and abort this after 60 seconds. Then the core will install without any troubles. After that you can plug in the network wire and everything run as needed.

Regards

Pages: [1]