Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - satyris

Pages: [1] 2 3 ... 7
1
Installation and Upgrades / Start of Zentyal 2.3 ?
« on: November 25, 2011, 11:05:51 am »
Hello,
when will you start with Zentyal 2.3 ?

2
Thanx for your answer, but what i was looking for is a solution where i had to edit the entries, because i saw that the wrong servername is in many files (.ldif).
 The other thing would be a possiblity from zentyal webgui, but i couldnt find it there ("Users and groups" --> Mode) ?!

3
Hello,
i used an old imported configuration, but LDAP has now the wrong servername (H2s --> NewServer3). How can i change this LDAP-settings ?

https://h2s/ebox/Users/Composite/Settings
Code: [Select]
Basisdomänenname (Base DN): dc=H2s,dc=fritz,dc=box
Wurzeldomänenname (Root DN): cn=ebox,dc=H2s,dc=fritz,dc=box
Passwort: xxxx
Users DN: ou=Users,dc=H2s,dc=fritz,dc=box
Groups DN: ou=Groups,dc=H2s,dc=fritz,dc=box


4
Quote
Zentyal is not an operating system
You are right with that, BUT Zentyal has InstallationCDs too and at the moment they are complete useless for Intel SandyBridge Users.

So, iam quite astonished that a wide spread Hardwareplatform like Sandy Bridge is not supported by Zentyal-InstallationCDs at the moment !


5
My solution so far:

1) http://kernel.ubuntu.com/~kernel-ppa/mainline/  visited and the newest Natty Kernel picked (v2.6.39-rc4-natty)

2) Download following packages:

    linux-image-2.6.39-020639rc4-generic_2.6.39-020639rc4.201104191410_amd64.deb

    linux-headers-2.6.39-020639rc4_2.6.39-020639rc4.201104191410_all.deb

    linux-headers-2.6.39-020639rc4-generic_2.6.39-020639rc4.201104191410_amd64.deb

copy them on an usbstick.

Installation:
dpkg -i linux-headers-2.6.39-020639rc4_2.6.39-020639rc4.201104191410_all.deb
dpkg -i linux-headers-2.6.39-020639rc4-generic_2.6.39-020639rc4.201104191410_amd64.deb
dpkg -i linux-image-2.6.39-020639rc4-generic_2.6.39-020639rc4.201104191410_amd64.deb

try:
modprobe e1000e
dhclient

automatic:
nano /etc/modules
e1000e

change:
nano /etc/network/interfaces
# The primary network interface
auto eth0
iface eth0 inet dhcp

@Calvo:
Dont understand why this should be an ubuntu problem, because anyone who has an Intel Sandy Bridge Board will have this problem !
Or would you say, Intel Sandy Bridge is not supported by zentyal ?

So far i see, it has to do with the old kernel from 10.04 LTS Ubuntu

6
Hello,
tried the Zentyal Installation with a Intel Sandy Bridge Motherboard, but it has problems with networking.
No device is recogniced.
After that i tried the Installation with a normal Ubuntu Server 10.04.03. The Installation was fine, but no networking here too.
I think, that it could be a driver problem.

Any hints or solution ?

7
Update:
Installed a Kubuntu 11.10 AMD64 desktop and it worked flawless. Same usbstick, same Hardware, so it MUST be a problem with the Zentyal-Installation CD !

8
Tried several ways and usbsticks. No luck, so far.

Decided to make a ticket:
http://trac.zentyal.org/ticket/3481

9
My Workstation is under Kubuntu 11.10. So it was used to create the usbstick.

The booting from usbstick is fine, Installation starts until the mentioned point above.

10
Hello,
tried to install Zentyal 2.2-1 AMD64 on an server with an usbstick 2GB twice and it always stopping at 84% with package zentyal-core?
Made the stick with ubuntu 11.10 "create start medium", because the server has no DVD-Drive.

So, is there a problem with zentyal-core or iam doing something wrong ?

11
Installation and Upgrades / fullbackup - redis server error ?
« on: June 18, 2011, 10:24:57 am »
Hello,
made a fullbackup with:
Code: [Select]
/usr/share/ebox-ebackup/ebox-remote-ebackup --full
Got an error:
Code: [Select]
Reconnecting to redis server (1 try)... at /usr/share/perl5/EBox/Config/Redis.pm line 567, <GEN10> line 1.
Reconnecting to redis server (1 try)... at /usr/share/perl5/EBox/Config/Redis.pm line 567, <GEN12> line 1.
Reconnecting to redis server (1 try)... at /usr/share/perl5/EBox/Config/Redis.pm line 567, <GEN14> line 1.
Reconnecting to redis server (1 try)... at /usr/share/perl5/EBox/Config/Redis.pm line 567, <GEN16> line 1.
Reconnecting to redis server (1 try)... at /usr/share/perl5/EBox/Config/Redis.pm line 567, <GEN18> line 1.
Reconnecting to redis server (1 try)... at /usr/share/perl5/EBox/Config/Redis.pm line 567, <GEN20> line 1.

Can i ignore that error or is my backup false ?

12
Removed/installed duplicity and ebox-backup. Cleared all .cache-directories and made a new fullbackup.
Copied it on an usbHD (ext4) and from it to my virtualbox-zentyalserver.

This is the error-message:

Code: [Select]
Last full backup date: Sat Apr  9 20:36:22 2011
Error '[Errno 17] File exists' processing home/admint2s/Desktop/zentyal.desktop
Error '[Errno 13] Permission denied: '/home/aquota.group'' processing home/aquota.group
Error '[Errno 13] Permission denied: '/home/aquota.user'' processing home/aquota.user
Invalid data - SHA1 hash mismatch:
Calculated hash: f55eeac10d4c8203e9e90108eb3df79d4402cd9a
Manifest hash: 1bde9b8b7b53d27068300d502df65c92dd25b5e0

or with -v 9:

Code: [Select]
Deleting /tmp/duplicity-cAeg6A-tempdir/mktemp-gvJTJ1-2
Forgetting temporary file /tmp/duplicity-cAeg6A-tempdir/mktemp-gvJTJ1-2
Processed volume 1 of 214
Registering (mktemp) temporary file /tmp/duplicity-cAeg6A-tempdir/mktemp-X7JC6Y-3
Invalid data - SHA1 hash mismatch:
Calculated hash: f55eeac10d4c8203e9e90108eb3df79d4402cd9a
Manifest hash: 1bde9b8b7b53d27068300d502df65c92dd25b5e0

Removing still remembered temporary file /tmp/duplicity-cAeg6A-tempdir/mktemp-X7JC6Y-3
Removing still remembered temporary file /tmp/duplicity-cAeg6A-tempdir/mkstemp-8RJ077-1


The only difference in Version i found is that the originalserver is AMD64 and the virtual is i386

Dont know any further

13
Iam going crazy. After the fullbackup i have no "confbackup.tar" to restore ?

At the original server there is that file missing, too.

14
Hello Trym,
on both systems are the same ebox-backup versions.

Code: [Select]
#apt-cache policy ebox-ebackup
ebox-ebackup:
  Installiert: 2.0.10
  Kandidat: 2.0.10

removed all the old backups from my backup-directory and started a new one whith:
/scripts/fullbackup

still waiting for finish  ;)

The usbstick has FAT32-Filesystem, my USBHD has ext3/4. Both tried and both failed.

But anyway, thanks for your help !


15
Different versions: I will check that tomorrow, but shouldnt be

Quote
to create a fresh backup set
Do you mean to make a fresh backup again ?


Reopend my ticket:
http://trac.zentyal.org/ticket/2512

Pages: [1] 2 3 ... 7