Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
61
Installation and Upgrades / Re: Request for Clarification - Master Slave Deployment
« on: October 15, 2009, 01:04:14 pm »
I look forward to seeing if the new version comes out next week.
My hope was to have a network something like this
A gateway to the nasty world outside
an internal only web server
a communications machine (jabber askterisk)
a groupware machine
I thought, until just now when I installed a machine for gateway, that the gateway could act as master and the others slaves to it but, oops, I just found out that the proxy depends on usersandgroups so can't run on the ldap master.
So... next week then...
My hope was to have a network something like this
A gateway to the nasty world outside
an internal only web server
a communications machine (jabber askterisk)
a groupware machine
I thought, until just now when I installed a machine for gateway, that the gateway could act as master and the others slaves to it but, oops, I just found out that the proxy depends on usersandgroups so can't run on the ldap master.
So... next week then...
62
Installation and Upgrades / UserCorner refused connection
« on: October 15, 2009, 11:25:11 am »
User corner seems to be having problems at https://ebox:8888 using ebox1.3
I get asked for a username and password then I get this
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, webmaster@localhost and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
I have just updated my system and got masses of errors along the lines of
Setting up ebox-webserver (1.3.6-0ubuntu1~ppa1~hardy1) ...
WARNING **: Owner of /tmp/orbit-ebox-usercorner is not the current user
WARNING **: Owner of /tmp/orbit-ebox-usercorner is not the current user
** (gconftool-2:26209): WARNING **: Owner of /tmp/orbit-ebox-usercorner is not the current user
** (gconftool-2:26210): WARNING **: Owner of /tmp/orbit-ebox-usercorner is not the current user
* Restarting eBox module: webserver [ OK ]
A farily reasonable error as the owner of this folder is ebox-usercorner and the update is being run as root (sudo) but is this in anyway connected to the reason I can not access usercorner?
I get asked for a username and password then I get this
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, webmaster@localhost and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
I have just updated my system and got masses of errors along the lines of
Setting up ebox-webserver (1.3.6-0ubuntu1~ppa1~hardy1) ...
WARNING **: Owner of /tmp/orbit-ebox-usercorner is not the current user
WARNING **: Owner of /tmp/orbit-ebox-usercorner is not the current user
** (gconftool-2:26209): WARNING **: Owner of /tmp/orbit-ebox-usercorner is not the current user
** (gconftool-2:26210): WARNING **: Owner of /tmp/orbit-ebox-usercorner is not the current user
* Restarting eBox module: webserver [ OK ]
A farily reasonable error as the owner of this folder is ebox-usercorner and the update is being run as root (sudo) but is this in anyway connected to the reason I can not access usercorner?
63
Installation and Upgrades / Re: ldap master slave problem
« on: October 13, 2009, 02:32:10 pm »
I did follow the document you mentioned but had not realised that the sentence 'We only need to install the usersandgroups module in the master eBox' meant you must only install usersandgroups. I took it to mean you must have usersandgroups but can have other things as well.
I currently have been trying a box with egroupware, jabber and asterisk and added a box with a web server and wanted the two of them to share ldap data. Eventually I want to add one to act as gateway to also share the ldap data.
So I guess, from what you say I need to start again, making my web server (or gateway) the master and set my current box as slave
(running 1.3 server, up to date as of today, on ubuntu8.04)
Thanks for pointing me in the right direction
I currently have been trying a box with egroupware, jabber and asterisk and added a box with a web server and wanted the two of them to share ldap data. Eventually I want to add one to act as gateway to also share the ldap data.
So I guess, from what you say I need to start again, making my web server (or gateway) the master and set my current box as slave
(running 1.3 server, up to date as of today, on ubuntu8.04)
Thanks for pointing me in the right direction
64
Installation and Upgrades / ldap master slave problem
« on: October 13, 2009, 12:35:35 pm »
Hi
I have just installed a second ebox1.3 server (web and usersandgroups)
When I set the usersandgroups to slave mode and tried to activate the module it failed. Initally I had an error about a non existant apparmor file (got rid of this by creating the file)
Then I had several failed attempts due to ldap password failures (copied password from the ebox-ldap.passwd file on the master.
Then I found the slave ldap was not starting up so commented out the SLAPD_NO_START in etc/default/slapd
now I am getting:-
A really nasty bug has occurred
Exception
Failed to enable: Can't call method "get_value" on an undefined value at /usr/share/perl5/EBox/UsersAndGroups.pm line 2455.
Trace
Failed to enable: Can't call method "get_value" on an undefined value at /usr/share/perl5/EBox/UsersAndGroups.pm line 2455.
at /usr/share/perl5/EBox/CGI/ServiceModule/ConfigureModuleController.pm line 74
EBox::CGI::ServiceModule::ConfigureModuleController::_process('EBox::CGI::ServiceModule::ConfigureModuleController=HASH(0xa4...') called at /usr/share/perl5/EBox/CGI/Base.pm line 261
EBox::CGI::Base::run('EBox::CGI::ServiceModule::ConfigureModuleController=HASH(0xa4...') called at /usr/share/perl5/EBox/CGI/Run.pm line 120
EBox::CGI::Run::run('EBox::CGI::Run', 'ServiceModule/ConfigureModuleController', 'EBox') called at /usr/share/ebox/cgi/ebox.cgi line 19
ModPerl::ROOT::ModPerl::Registry::usr_share_ebox_cgi_ebox_2ecgi::handler('Apache2::RequestRec=SCALAR(0xa43e09c)') called at /usr/lib/perl5/ModPerl/RegistryCooker.pm line 204
eval {...} called at /usr/lib/perl5/ModPerl/RegistryCooker.pm line 204
ModPerl::RegistryCooker::run('ModPerl::Registry=HASH(0xa43e60c)') called at /usr/lib/perl5/ModPerl/RegistryCooker.pm line 170
ModPerl::RegistryCooker::default_handler('ModPerl::Registry=HASH(0xa43e60c)') called at /usr/lib/perl5/ModPerl/Registry.pm line 31
ModPerl::Registry::handler('ModPerl::Registry', 'Apache2::RequestRec=SCALAR(0xa43e09c)') called at -e line 0
eval {...} called at -e line 0
Any idea where to go next?
Thanks
I have just installed a second ebox1.3 server (web and usersandgroups)
When I set the usersandgroups to slave mode and tried to activate the module it failed. Initally I had an error about a non existant apparmor file (got rid of this by creating the file)
Then I had several failed attempts due to ldap password failures (copied password from the ebox-ldap.passwd file on the master.
Then I found the slave ldap was not starting up so commented out the SLAPD_NO_START in etc/default/slapd
now I am getting:-
A really nasty bug has occurred
Exception
Failed to enable: Can't call method "get_value" on an undefined value at /usr/share/perl5/EBox/UsersAndGroups.pm line 2455.
Trace
Failed to enable: Can't call method "get_value" on an undefined value at /usr/share/perl5/EBox/UsersAndGroups.pm line 2455.
at /usr/share/perl5/EBox/CGI/ServiceModule/ConfigureModuleController.pm line 74
EBox::CGI::ServiceModule::ConfigureModuleController::_process('EBox::CGI::ServiceModule::ConfigureModuleController=HASH(0xa4...') called at /usr/share/perl5/EBox/CGI/Base.pm line 261
EBox::CGI::Base::run('EBox::CGI::ServiceModule::ConfigureModuleController=HASH(0xa4...') called at /usr/share/perl5/EBox/CGI/Run.pm line 120
EBox::CGI::Run::run('EBox::CGI::Run', 'ServiceModule/ConfigureModuleController', 'EBox') called at /usr/share/ebox/cgi/ebox.cgi line 19
ModPerl::ROOT::ModPerl::Registry::usr_share_ebox_cgi_ebox_2ecgi::handler('Apache2::RequestRec=SCALAR(0xa43e09c)') called at /usr/lib/perl5/ModPerl/RegistryCooker.pm line 204
eval {...} called at /usr/lib/perl5/ModPerl/RegistryCooker.pm line 204
ModPerl::RegistryCooker::run('ModPerl::Registry=HASH(0xa43e60c)') called at /usr/lib/perl5/ModPerl/RegistryCooker.pm line 170
ModPerl::RegistryCooker::default_handler('ModPerl::Registry=HASH(0xa43e60c)') called at /usr/lib/perl5/ModPerl/Registry.pm line 31
ModPerl::Registry::handler('ModPerl::Registry', 'Apache2::RequestRec=SCALAR(0xa43e09c)') called at -e line 0
eval {...} called at -e line 0
Any idea where to go next?
Thanks
65
Installation and Upgrades / Re: ebox 1.3 egroupware syncronise
« on: October 02, 2009, 03:04:03 pm »
Still no luck - I have since found that php5-xmlrpc was not installed so I have added this to no effect.
Also found libapache2-mod-xmlrpc2 was not installed (along with some dependancies) so installed that too but not working yet.
I have tried sync with outlook, using funambole (syncML) which works for calendar and tasks but fails for address book
Also found libapache2-mod-xmlrpc2 was not installed (along with some dependancies) so installed that too but not working yet.
I have tried sync with outlook, using funambole (syncML) which works for calendar and tasks but fails for address book
66
Installation and Upgrades / Re: ebox 1.3 egroupware syncronise
« on: September 29, 2009, 01:45:55 pm »
I will do that
67
Installation and Upgrades / ebox 1.3 egroupware syncronise
« on: September 29, 2009, 01:18:09 pm »
Hi
I am trying to sync the address book and calender in egroupware to Kontact (at the moment, later I need to try Outlook and/or Thunderdird)
I should be able to use either groupdav or xmlrpc but can't get either to work.
I have set 'Enable the xmlrpc service' to 'yes' in egroupware Admin>site configuration
I have enabled both groupdav and egw-pear from the Admin>User groups
Then when groupdav and xmlrpc still did not work I did a 'pear install XML_RPC' but still no luck
In the Kontact calendar and address book, groupdav does nothing, apart from checking about a certificate mismatch on the first try. No errors, but unable to update the folder list.
I am using https://192.168.1.6/egroupware/groupdav.php/ as the url with my username and password. Using http results in me being asked for a username and password but, again, no sync or even update of folder list.
With xmlrpc the calendar gives no errors but does not sync using https://192.168.1.6/egroupware/xmlrpc.php domain = default (or ebox or one of the group names I created) and my username and password.
with the address book I used the same settings and got the error 'Received invalid XML markup: unexpected character at 1:50' both before and after I installed XMP_RPC in pear.
I thought about using ldap but although I can access ldap in Kontact I can't figure out the right settings to use. Picking 'subtree query' gives me everything but egroupware is obviously not storing addresses, other than the account address details, in ldap anyway so not really a solution unless I can make egroupware use ldap without messing up ebox!
Any ideas anyone?
I am trying to sync the address book and calender in egroupware to Kontact (at the moment, later I need to try Outlook and/or Thunderdird)
I should be able to use either groupdav or xmlrpc but can't get either to work.
I have set 'Enable the xmlrpc service' to 'yes' in egroupware Admin>site configuration
I have enabled both groupdav and egw-pear from the Admin>User groups
Then when groupdav and xmlrpc still did not work I did a 'pear install XML_RPC' but still no luck
In the Kontact calendar and address book, groupdav does nothing, apart from checking about a certificate mismatch on the first try. No errors, but unable to update the folder list.
I am using https://192.168.1.6/egroupware/groupdav.php/ as the url with my username and password. Using http results in me being asked for a username and password but, again, no sync or even update of folder list.
With xmlrpc the calendar gives no errors but does not sync using https://192.168.1.6/egroupware/xmlrpc.php domain = default (or ebox or one of the group names I created) and my username and password.
with the address book I used the same settings and got the error 'Received invalid XML markup: unexpected character at 1:50' both before and after I installed XMP_RPC in pear.
I thought about using ldap but although I can access ldap in Kontact I can't figure out the right settings to use. Picking 'subtree query' gives me everything but egroupware is obviously not storing addresses, other than the account address details, in ldap anyway so not really a solution unless I can make egroupware use ldap without messing up ebox!
Any ideas anyone?