This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
1
Installation and Upgrades / Re: ebox kills networking when enabling network module
« on: January 06, 2010, 01:15:09 am »
ifconfig shows the following (this is not the real IP address):
when trying to ping my other server (also fake IP here):
when running dhclient eth0:
/var/log/syslog.0
Quote
eth0 Link encap:Ethernet Hardware Adresse 00:0e:0c:cf:af:38
inet Adresse:85.224.81.25 Bcast:85.224.81.25 Maske:255.255.255.255
inet6-Adresse: fe10::20a:cff:facf:af38/64 Gültigkeitsbereich:Verbindung
UP BROADCAST RUNNING MULTICAST MTU:1500 Metrik:1
RX packets:81837 errors:0 dropped:0 overruns:0 frame:0
TX packets:49529 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenlänge:100
RX bytes:101385523 (96.6 MB) TX bytes:4504294 (4.2 MB)
Basisadresse:0x9000 Speicher:f2020000-f2040000
lo Link encap:Lokale Schleife
inet Adresse:127.0.0.1 Maske:255.0.0.0
inet6-Adresse: ::1/128 Gültigkeitsbereich:Maschine
UP LOOPBACK RUNNING MTU:16436 Metrik:1
RX packets:992 errors:0 dropped:0 overruns:0 frame:0
TX packets:992 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenlänge:0
RX bytes:499821 (488.1 KB) TX bytes:499821 (488.1 KB)
when trying to ping my other server (also fake IP here):
Quote
ping 82.119.272.26
connect: Network is unreachable
when running dhclient eth0:
Quote
# dhclient eth0
There is already a pid file /var/run/dhclient.pid with pid 28481
removed stale PID file
Internet Systems Consortium DHCP Client V3.0.6
Copyright 2004-2007 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
EBox: status module network: [ ENABLED ]
EBox: status module network: [ ENABLED ]
Listening on LPF/eth0/00:0e:0c:cf:af:38
Sending on LPF/eth0/00:0e:0c:cf:af:38
Sending on Socket/fallback
DHCPREQUEST of 85.224.81.25 on eth0 to 255.255.255.255 port 67
DHCPACK of 85.224.81.25 from 85.224.1.21
EBox: status module network: [ ENABLED ]
EBox: status module network: [ ENABLED ]
RTNETLINK answers: No such process
bound to 85.224.81.25 -- renewal in 40378 seconds.
/var/log/syslog.0
Quote
Jan 5 23:48:00 h2472651 amavis[12848]: Found decoder for .exe at /usr/bin/arj
Jan 5 23:48:00 h2472651 amavis[12848]: Creating db in /var/lib/amavis/db/; BerkeleyDB 0.32, libdb 4.6
Jan 5 23:48:36 h2472651 postfix/master[12345]: terminating on signal 15
Jan 5 23:48:36 h2472651 postfix/master[13331]: daemon started -- version 2.5.1, configuration /etc/postfix
Jan 5 23:50:47 h2472651 anacron[7623]: Job `cron.daily' started
Jan 5 23:50:47 h2472651 anacron[14137]: Updated timestamp for job `cron.daily' to 2010-01-05
Jan 6 00:01:55 h2472651 kernel: [ 1057.552795] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
Jan 6 00:01:55 h2472651 kernel: [ 1057.552801] All bugs added by David S. Miller <davem@redhat.com>
Jan 6 00:01:55 h2472651 postfix/master[13331]: reload configuration /etc/postfix
Jan 6 00:01:55 h2472651 dhclient: There is already a pid file /var/run/dhclient.eth0.pid with pid 4035
Jan 6 00:01:55 h2472651 dhclient: killed old client process, removed PID file
Jan 6 00:01:55 h2472651 dhclient: Internet Systems Consortium DHCP Client V3.0.6
Jan 6 00:01:55 h2472651 dhclient: Copyright 2004-2007 Internet Systems Consortium.
Jan 6 00:01:55 h2472651 dhclient: All rights reserved.
Jan 6 00:01:55 h2472651 dhclient: For info, please visit http://www.isc.org/sw/dhcp/
Jan 6 00:01:55 h2472651 dhclient:
Jan 6 00:01:55 h2472651 dhclient: Listening on LPF/eth0/00:0e:0c:cf:af:38
Jan 6 00:01:55 h2472651 dhclient: Sending on LPF/eth0/00:0e:0c:cf:af:38
Jan 6 00:01:55 h2472651 dhclient: Sending on Socket/fallback
Jan 6 00:01:56 h2472651 kernel: [ 1058.248776] ADDRCONF(NETDEV_UP): eth0: link is not ready
Jan 6 00:01:56 h2472651 ntpd[4185]: ntpd exiting on signal 15
Jan 6 00:01:56 h2472651 ntpdate[14730]: can't find host ntp1.stratoserver.net
Jan 6 00:01:56 h2472651 ntpdate[14730]: can't find host ntp2.stratoserver.net
Jan 6 00:01:56 h2472651 ntpdate[14730]: no servers can be used, exiting
Jan 6 00:01:56 h2472651 postfix/master[13331]: reload configuration /etc/postfix
Jan 6 00:01:57 h2472651 ntpd[14764]: ntpd 4.2.4p4@1.1520-o Wed May 13 21:06:31 UTC 2009 (1)
Jan 6 00:01:57 h2472651 ntpd[14766]: precision = 2.000 usec
Jan 6 00:01:57 h2472651 ntpd[14766]: Listening on interface #0 wildcard, 0.0.0.0#123 Disabled
Jan 6 00:01:57 h2472651 ntpd[14766]: Listening on interface #1 wildcard, ::#123 Disabled
Jan 6 00:01:57 h2472651 ntpd[14766]: Listening on interface #2 lo, ::1#123 Enabled
Jan 6 00:01:57 h2472651 ntpd[14766]: Listening on interface #3 lo, 127.0.0.1#123 Enabled
Jan 6 00:01:57 h2472651 ntpd[14766]: Listening on interface #4 eth0, 85.224.81.25#123 Enabled
Jan 6 00:01:57 h2472651 ntpd[14766]: kernel time sync status 0040
Jan 6 00:01:57 h2472651 ntpd[14766]: frequency initialized 7.592 PPM from /var/lib/ntp/ntp.drift
root@h2472651:~# tail -n 20 /var/log/syslog.0 | less
Jan 6 00:01:57 h2472651 ntpd[14766]: Listening on interface #3 lo, 127.0.0.1#123 Enabled
Jan 6 00:01:57 h2472651 ntpd[14766]: Listening on interface #4 eth0, 85.224.81.25#123 Enabled
Jan 6 00:01:57 h2472651 ntpd[14766]: kernel time sync status 0040
Jan 6 00:01:57 h2472651 ntpd[14766]: frequency initialized 7.592 PPM from /var/lib/ntp/ntp.drift
Jan 6 00:01:57 h2472651 ntpd[14766]: getaddrinfo: "ntp1.stratoserver.net" invalid host address, ignored
Jan 6 00:01:57 h2472651 ntpd[14766]: getaddrinfo: "ntp2.stratoserver.net" invalid host address, ignored
Jan 6 00:01:57 h2472651 ntpd[14769]: signal_no_reset: signal 17 had flags 4000000
Jan 6 00:01:57 h2472651 kernel: [ 1058.677004] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
Jan 6 00:01:57 h2472651 kernel: [ 1058.679075] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Jan 6 00:01:58 h2472651 ntpd[14766]: bind() fd 21, family 10, port 123, scope 2, addr fe80::20e:cff:fecf:af38, in6_is_addr_multicast=0 flags=0x11 fails: Cannot assign requested address
Jan 6 00:01:58 h2472651 ntpd[14766]: unable to create socket on eth0 (5) for fe80::20e:cff:fecf:af38#123
root@h2472651:~# tail -n 10 /var/log/syslog.0 | less
Jan 6 00:01:58 h2472651 ntpd[14766]: unable to create socket on eth0 (5) for fe80::20e:cff:fecf:af38#123
Jan 6 00:01:58 h2472651 ntpd[14766]: failed to initialize interface for address fe80::20e:cff:fecf:af38
Jan 6 00:01:59 h2472651 ntpd_initres[14769]: host name not found: ntp1.stratoserver.net
Jan 6 00:01:59 h2472651 ntpd_initres[14769]: couldn't resolve `ntp1.stratoserver.net', giving up on it
Jan 6 00:01:59 h2472651 ntpd_initres[14769]: host name not found: ntp2.stratoserver.net
Jan 6 00:01:59 h2472651 ntpd_initres[14769]: couldn't resolve `ntp2.stratoserver.net', giving up on it
Jan 6 00:02:00 h2472651 kernel: [ 1060.030638] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Jan 6 00:02:01 h2472651 /USR/SBIN/CRON[14880]: (root) CMD (if [ -x /usr/sbin/pg_maintenance ]; then /usr/sbin/pg_maintenance --analyze >/dev/null; fi)
Jan 6 00:06:58 h2472651 ntpd[14766]: Listening on interface #6 eth0, fe80::20e:cff:fecf:af38#123 Enabled
Jan 6 00:17:01 h2472651 /USR/SBIN/CRON[27834]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
2
Installation and Upgrades / Re: ebox kills networking when enabling network module
« on: January 06, 2010, 01:14:58 am »
Well, I have some tidbits of additional information, though I don't see how it helps just yet:
top yields the following
netstat -av yields the following:
top yields the following
Quote
top - 00:52:44 up 1:22, 1 user, load average: 0.95, 0.98, 0.98
Tasks: 91 total, 3 running, 86 sleeping, 0 stopped, 2 zombie
Cpu(s): 2.0%us, 2.5%sy, 0.2%ni, 91.6%id, 2.8%wa, 0.1%hi, 0.8%si, 0.0%st
Mem: 2045788k total, 1054228k used, 991560k free, 81416k buffers
Swap: 2104496k total, 0k used, 2104496k free, 604916k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
28526 root 20 0 18856 1148 856 R 2 0.1 0:00.01 top
1 root 20 0 4004 864 592 S 0 0.0 0:01.88 init
2 root 15 -5 0 0 0 S 0 0.0 0:00.00 kthreadd
3 root RT -5 0 0 0 S 0 0.0 0:00.03 migration/0
4 root 15 -5 0 0 0 S 0 0.0 0:00.06 ksoftirqd/0
5 root RT -5 0 0 0 S 0 0.0 0:00.00 watchdog/0
6 root RT -5 0 0 0 S 0 0.0 0:00.04 migration/1
7 root 15 -5 0 0 0 S 0 0.0 0:00.28 ksoftirqd/1
8 root RT -5 0 0 0 S 0 0.0 0:00.00 watchdog/1
9 root 15 -5 0 0 0 S 0 0.0 0:00.01 events/0
10 root 15 -5 0 0 0 S 0 0.0 0:00.04 events/1
11 root 15 -5 0 0 0 S 0 0.0 0:00.01 khelper
44 root 15 -5 0 0 0 S 0 0.0 0:00.00 kblockd/0
45 root 15 -5 0 0 0 S 0 0.0 0:00.02 kblockd/1
48 root 15 -5 0 0 0 S 0 0.0 0:00.00 kacpid
49 root 15 -5 0 0 0 S 0 0.0 0:00.00 kacpi_notify
140 root 15 -5 0 0 0 S 0 0.0 0:00.00 kseriod
190 root 20 0 0 0 0 S 0 0.0 0:00.00 pdflush
191 root 20 0 0 0 0 S 0 0.0 0:01.49 pdflush
192 root 15 -5 0 0 0 S 0 0.0 0:00.00 kswapd0
235 root 15 -5 0 0 0 S 0 0.0 0:00.00 aio/0
236 root 15 -5 0 0 0 S 0 0.0 0:00.00 aio/1
1566 root 15 -5 0 0 0 S 0 0.0 0:00.00 ksuspend_usbd
1576 root 15 -5 0 0 0 S 0 0.0 0:00.00 khubd
1578 root 15 -5 0 0 0 S 0 0.0 0:00.00 ata/0
1580 root 15 -5 0 0 0 S 0 0.0 0:00.00 ata/1
1582 root 15 -5 0 0 0 S 0 0.0 0:00.00 ata_aux
1950 root 15 -5 0 0 0 S 0 0.0 0:00.01 scsi_eh_0
1957 root 15 -5 0 0 0 S 0 0.0 0:00.00 scsi_eh_1
2324 root 15 -5 0 0 0 S 0 0.0 0:00.03 scsi_eh_2
2328 root 15 -5 0 0 0 S 0 0.0 0:00.03 scsi_eh_3
2365 root 15 -5 0 0 0 S 0 0.0 0:00.02 scsi_eh_4
2366 root 15 -5 0 0 0 S 0 0.0 0:00.02 scsi_eh_5
2513 root 15 -5 0 0 0 S 0 0.0 0:00.00 md0_raid1
2519 root 15 -5 0 0 0 R 0 0.0 0:12.71 md1_raid1
2521 root 15 -5 0 0 0 R 0 0.0 0:47.32 md1_resync
2630 root 15 -5 0 0 0 S 0 0.0 0:02.41 kjournald
2806 root 16 -4 16892 936 460 S 0 0.0 0:00.66 udevd
3095 root 15 -5 0 0 0 S 0 0.0 0:00.00 kpsmoused
4400 root 15 -5 0 0 0 S 0 0.0 0:00.03 kondemand/0
4401 root 15 -5 0 0 0 S 0 0.0 0:00.00 kondemand/1
4476 syslog 20 0 12296 756 564 S 0 0.0 0:00.10 syslogd
4500 root 20 0 8132 588 476 S 0 0.0 0:00.03 dd
4502 klog 20 0 6028 2720 432 S 0 0.1 0:00.11 klogd
4577 root 20 0 12436 496 312 S 0 0.0 0:00.02 mdadm
4593 daemon 20 0 16428 432 284 S 0 0.0 0:00.00 atd
4606 root 20 0 18620 980 756 S 0 0.0 0:00.00 cron
4632 root 20 0 3864 588 492 S 0 0.0 0:00.00 getty
4633 root 20 0 45700 1292 984 S 0 0.1 0:00.00 login
7830 root 20 0 108m 2652 1164 S 0 0.1 0:00.02 apache2
7831 www-data 20 0 108m 2092 592 S 0 0.1 0:00.00 apache2
7833 www-data 20 0 108m 2092 592 S 0 0.1 0:00.00 apache2
7834 www-data 20 0 108m 2092 592 S 0 0.1 0:00.00 apache2
7836 www-data 20 0 108m 2092 592 S 0 0.1 0:00.00 apache2
7837 www-data 20 0 108m 2092 592 S 0 0.1 0:00.00 apache2
8838 clamav 20 0 21792 1444 1032 S 0 0.1 0:04.36 freshclam
9348 clamav 20 0 145m 122m 868 S 0 6.1 0:03.03 clamd
9413 root 20 0 3844 328 240 S 0 0.0 0:00.00 collectdmon
9414 root 20 0 229m 1932 1196 S 0 0.1 0:50.39 collectd
9772 root 20 0 12452 664 472 S 0 0.0 0:00.04 dovecot
9774 root 20 0 71784 2924 2184 S 0 0.1 0:00.05 dovecot-auth
9842 dovecot 20 0 14140 1872 1488 S 0 0.1 0:00.06 pop3-login
9843 dovecot 20 0 14140 1868 1488 S 0 0.1 0:00.05 pop3-login
9844 dovecot 20 0 14140 1868 1488 S 0 0.1 0:00.05 pop3-login
10490 root 20 0 18880 2076 1488 S 0 0.1 0:00.27 bash
10595 postgres 20 0 99.2m 6340 5452 S 0 0.3 0:00.81 postgres
10598 postgres 20 0 99.3m 2536 1604 S 0 0.1 0:00.21 postgres
10599 postgres 20 0 99.2m 1548 648 S 0 0.1 0:00.06 postgres
10600 postgres 20 0 99.3m 1792 780 S 0 0.1 0:00.04 postgres
10601 postgres 20 0 71996 1432 476 S 0 0.1 0:00.05 postgres
12527 postgrey 20 0 55760 11m 2580 S 0 0.6 0:00.02 postgrey
12848 amavis 20 0 115m 38m 2292 S 0 1.9 0:00.11 amavisd-new
12849 amavis 20 0 116m 37m 1588 S 0 1.9 0:00.01 amavisd-new
12850 amavis 20 0 116m 37m 1544 S 0 1.9 0:00.01 amavisd-new
13331 root 20 0 36684 2136 1688 S 0 0.1 0:00.03 master
13960 root 20 0 221m 29m 4800 S 0 1.5 0:00.56 apache2
13973 ebox 20 0 333m 78m 5872 S 0 3.9 0:08.85 apache2
13976 ebox 20 0 38660 2812 2000 S 0 0.1 0:01.75 gconfd-2
14302 ebox 20 0 0 0 0 Z 0 0.0 0:02.06 ebox-glob <defunct>
14495 ebox 20 0 0 0 0 Z 0 0.0 0:03.64 ebox-glob <defunct>
14713 root 20 0 50916 1128 652 S 0 0.1 0:00.00 sshd
14754 postfix 20 0 38740 2136 1696 S 0 0.1 0:00.01 pickup
14756 postfix 20 0 38784 2204 1760 S 0 0.1 0:00.01 qmgr
14766 ntp 20 0 23364 1388 988 S 0 0.1 0:00.01 ntpd
28398 dovecot 20 0 14148 1872 1492 S 0 0.1 0:00.01 imap-login
28399 dovecot 20 0 14148 1880 1492 S 0 0.1 0:00.01 imap-login
28400 dovecot 20 0 14148 1872 1492 S 0 0.1 0:00.01 imap-login
28401 dovecot 20 0 14148 1876 1492 S 0 0.1 0:00.01 imap-login
28402 dovecot 20 0 14148 1876 1492 S 0 0.1 0:00.01 imap-login
28403 dovecot 20 0 14148 1876 1492 S 0 0.1 0:00.01 imap-login
28481 dhcp 20 0 15108 844 320 S 0 0.0 0:00.00 dhclient
netstat -av yields the following:
Quote
Aktive Internetverbindungen (Server und stehende Verbindungen)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 localhost:60000 *:* LISTEN
tcp 0 0 *:imaps *:* LISTEN
tcp 0 0 *:pop3s *:* LISTEN
tcp 0 0 localhost:10024 *:* LISTEN
tcp 0 0 *:pop3 *:* LISTEN
tcp 0 0 *:imap2 *:* LISTEN
tcp 0 0 *:www *:* LISTEN
tcp 0 0 localhost:postgresql *:* LISTEN
tcp 0 0 *:smtp *:* LISTEN
tcp 0 0 *:https *:* LISTEN
tcp6 0 0 [::]:ssh [::]:* LISTEN
udp 0 0 localhost:56309 localhost:56309 VERBUNDEN
udp 0 0 h1675121.stratoserv:ntp *:*
udp 0 0 localhost:ntp *:*
udp 0 0 *:ntp *:*
udp6 0 0 [UNBEKANNT]:ntp [::]:*
udp6 0 0 ip6-localhost:ntp [::]:*
udp6 0 0 [::]:ntp [::]:*
Aktive Sockets in der UNIX-Domäne (Server und stehende Verbindungen)
Proto RefCnt Flags Type State I-Node Pfad
unix 2 [ ACC ] STREAM HÖRT 80651 /tmp/orbit-ebox/linc-33
698-0-28cb289ad67c4
unix 2 [ ACC ] STREAM HÖRT 80660 /tmp/orbit-ebox/linc-33
695-0-5b105047d7b87
unix 2 [ ACC ] STREAM HÖRT 32534 /var/run/dovecot/dict--
server
unix 2 [ ACC ] STREAM HÖRT 32536 /var/run/dovecot/loginn
/default
unix 2 [ ACC ] STREAM HÖRT 32545 /var/run/dovecot/auth--
worker.9774
unix 2 [ ACC ] STREAM HÖRT 71866 public/cleanup
unix 2 [ ACC ] STREAM HÖRT 71873 private/tlsmgr
unix 2 [ ACC ] STREAM HÖRT 71877 private/rewrite
unix 2 [ ACC ] STREAM HÖRT 71881 private/bounce
unix 2 [ ACC ] STREAM HÖRT 71885 private/defer
unix 2 [ ACC ] STREAM HÖRT 71889 private/trace
unix 2 [ ACC ] STREAM HÖRT 71893 private/verify
unix 2 [ ACC ] STREAM HÖRT 71897 public/flush
unix 2 [ ACC ] STREAM HÖRT 71901 private/proxymap
unix 2 [ ACC ] STREAM HÖRT 71905 private/proxywrite
unix 2 [ ACC ] STREAM HÖRT 71909 private/smtp
unix 2 [ ACC ] STREAM HÖRT 71915 private/relay
unix 2 [ ] DGRAM 6000 @/com/ubuntu/upstart
unix 2 [ ACC ] STREAM HÖRT 71919 public/showq
unix 2 [ ACC ] STREAM HÖRT 71923 private/error
unix 2 [ ACC ] STREAM HÖRT 71927 private/retry
unix 2 [ ACC ] STREAM HÖRT 71931 private/discard
unix 2 [ ACC ] STREAM HÖRT 71935 private/local
unix 2 [ ACC ] STREAM HÖRT 71939 private/virtual
unix 2 [ ACC ] STREAM HÖRT 71943 private/lmtp
unix 2 [ ACC ] STREAM HÖRT 71947 private/anvil
unix 2 [ ACC ] STREAM HÖRT 71951 private/scache
unix 2 [ ACC ] STREAM HÖRT 71955 private/maildrop
unix 2 [ ACC ] STREAM HÖRT 71959 private/uucp
unix 2 [ ACC ] STREAM HÖRT 71963 private/ifmail
unix 2 [ ACC ] STREAM HÖRT 71967 private/bsmtp
unix 2 [ ACC ] STREAM HÖRT 71971 private/scalemail-backkend
unix 2 [ ACC ] STREAM HÖRT 71975 private/mailman
unix 2 [ ] DGRAM 6172 @/org/kernel/udev/udeevd
unix 13 [ ] DGRAM 10894 /dev/log
unix 2 [ ACC ] STREAM HÖRT 34757 /var/run/postgresql/.ss.PGSQL.5432
unix 2 [ ACC ] STREAM HÖRT 31450 /var/run/clamav/clamd..ctl
unix 2 [ ACC ] STREAM HÖRT 60506 /var/lib/amavis/amavissd.sock
unix 4 [ ] STREAM VERBINDUNGSAUFBAU 0 /tmp/orbit-ebox/llinc-3695-0-5b105047d7b87
unix 118 [ ] STREAM VERBUNDEN 106214
unix 3 [ ] STREAM VERBINDUNGSAUFBAU 0 /tmp/orbit-ebox/llinc-3695-0-5b105047d7b87
unix 3 [ ] STREAM VERBINDUNGSAUFBAU 0 /tmp/orbit-ebox/llinc-3695-0-5b105047d7b87
unix 3 [ ] STREAM VERBUNDEN 104064 /var/run/dovecot/logiin/default
unix 3 [ ] STREAM VERBUNDEN 104063
unix 3 [ ] STREAM VERBUNDEN 104060
unix 3 [ ] STREAM VERBUNDEN 104059
unix 3 [ ] STREAM VERBUNDEN 104058 /var/run/dovecot/logiin/default
unix 3 [ ] STREAM VERBUNDEN 104057
unix 3 [ ] STREAM VERBUNDEN 104054
unix 3 [ ] STREAM VERBUNDEN 104053
unix 3 [ ] STREAM VERBUNDEN 104052 /var/run/dovecot/logiin/default
unix 3 [ ] STREAM VERBUNDEN 104051
unix 3 [ ] STREAM VERBUNDEN 104049 /var/run/dovecot/logiin/default
unix 3 [ ] STREAM VERBUNDEN 104048
unix 3 [ ] STREAM VERBUNDEN 104045
unix 3 [ ] STREAM VERBUNDEN 104044
unix 3 [ ] STREAM VERBUNDEN 104043 /var/run/dovecot/logiin/default
unix 3 [ ] STREAM VERBUNDEN 104042
unix 3 [ ] STREAM VERBUNDEN 104039
unix 3 [ ] STREAM VERBUNDEN 104038
unix 3 [ ] STREAM VERBUNDEN 104037 /var/run/dovecot/logiin/default
unix 3 [ ] STREAM VERBUNDEN 104036
unix 3 [ ] STREAM VERBUNDEN 104033
unix 3 [ ] STREAM VERBUNDEN 104032
unix 3 [ ] STREAM VERBUNDEN 104030
unix 3 [ ] STREAM VERBUNDEN 104029
unix 3 [ ] STREAM VERBINDUNGSAUFBAU 0 /tmp/orbit-ebox/llinc-3695-0-5b105047d7b87
unix 3 [ ] STREAM VERBINDUNGSAUFBAU 0 /tmp/orbit-ebox/llinc-3695-0-5b105047d7b87
unix 3 [ ] STREAM VERBINDUNGSAUFBAU 0 /tmp/orbit-ebox/llinc-3695-0-5b105047d7b87
unix 3 [ ] STREAM VERBINDUNGSAUFBAU 0 /tmp/orbit-ebox/ll
inc-3695-0-5b105047d7b87
unix 3 [ ] STREAM VERBINDUNGSAUFBAU 0 /tmp/orbit-ebox/ll
inc-3695-0-5b105047d7b87
unix 2 [ ] DGRAM 87029
unix 2 [ ] DGRAM 87007
unix 2 [ ] DGRAM 86997
unix 3 [ ] STREAM VERBUNDEN 86990
unix 3 [ ] STREAM VERBUNDEN 86989
unix 3 [ ] STREAM VERBUNDEN 86988
unix 3 [ ] STREAM VERBUNDEN 86987
unix 3 [ ] STREAM VERBUNDEN 86986
unix 3 [ ] STREAM VERBUNDEN 86985
unix 3 [ ] STREAM VERBUNDEN 86984
unix 3 [ ] STREAM VERBUNDEN 86983
unix 3 [ ] STREAM VERBUNDEN 86982
unix 3 [ ] STREAM VERBUNDEN 86981
unix 3 [ ] STREAM VERBUNDEN 86980
unix 3 [ ] STREAM VERBUNDEN 86979
unix 3 [ ] STREAM VERBUNDEN 86978
unix 3 [ ] STREAM VERBUNDEN 86977
unix 3 [ ] STREAM VERBUNDEN 86976
unix 3 [ ] STREAM VERBUNDEN 86975
unix 3 [ ] STREAM VERBUNDEN 86974
unix 3 [ ] STREAM VERBUNDEN 86973
unix 3 [ ] STREAM VERBUNDEN 86972
unix 3 [ ] STREAM VERBUNDEN 86971
unix 3 [ ] STREAM VERBUNDEN 86970
unix 3 [ ] STREAM VERBUNDEN 86969
unix 3 [ ] STREAM VERBUNDEN 86968
unix 3 [ ] STREAM VERBUNDEN 86967
unix 3 [ ] STREAM VERBUNDEN 86966
unix 3 [ ] STREAM VERBUNDEN 86965
unix 3 [ ] STREAM VERBUNDEN 86964
unix 3 [ ] STREAM VERBUNDEN 86963
unix 3 [ ] STREAM VERBUNDEN 86962
unix 3 [ ] STREAM VERBUNDEN 86961
unix 3 [ ] STREAM VERBUNDEN 86960
unix 3 [ ] STREAM VERBUNDEN 86959
unix 3 [ ] STREAM VERBUNDEN 86958
unix 3 [ ] STREAM VERBUNDEN 86957
unix 3 [ ] STREAM VERBUNDEN 86956
unix 3 [ ] STREAM VERBUNDEN 86955
unix 3 [ ] STREAM VERBUNDEN 86954
unix 3 [ ] STREAM VERBUNDEN 86953
unix 3 [ ] STREAM VERBUNDEN 86952
unix 3 [ ] STREAM VERBUNDEN 86951
unix 3 [ ] STREAM VERBUNDEN 86950
unix 3 [ ] STREAM VERBUNDEN 86949
unix 3 [ ] STREAM VERBUNDEN 86948
unix 3 [ ] STREAM VERBUNDEN 86947
unix 3 [ ] STREAM VERBUNDEN 86946
unix 3 [ ] STREAM VERBUNDEN 86945
unix 3 [ ] STREAM VERBUNDEN 86944
unix 3 [ ] STREAM VERBUNDEN 86943
unix 3 [ ] STREAM VERBUNDEN 86942
unix 3 [ ] STREAM VERBUNDEN 86941
unix 3 [ ] STREAM VERBUNDEN 86940
unix 3 [ ] STREAM VERBUNDEN 86939
unix 3 [ ] STREAM VERBUNDEN 86938
unix 3 [ ] STREAM VERBUNDEN 86937
unix 3 [ ] STREAM VERBUNDEN 86936
unix 3 [ ] STREAM VERBUNDEN 86935
unix 3 [ ] STREAM VERBUNDEN 86934
unix 3 [ ] STREAM VERBUNDEN 86933
unix 3 [ ] STREAM VERBUNDEN 86932
unix 3 [ ] STREAM VERBUNDEN 86931
unix 2 [ ] STREAM VERBUNDEN 80664 /tmp/orbit-ebox/linc--3695-0-5b105047d7b87
unix 3 [ ] STREAM VERBUNDEN 80662 /tmp/orbit-ebox/linc--3698-0-28cb289ad67c4
unix 3 [ ] STREAM VERBUNDEN 80659
unix 2 [ ] DGRAM 71848
unix 2 [ ] DGRAM 60525
unix 2 [ ] DGRAM 60524
unix 2 [ ] DGRAM 60504
unix 2 [ ] DGRAM 56022
unix 2 [ ] DGRAM 34149
unix 3 [ ] STREAM VERBUNDEN 32793 /var/run/dovecot/logiin/default
unix 3 [ ] STREAM VERBUNDEN 32792
unix 3 [ ] STREAM VERBUNDEN 32785
unix 3 [ ] STREAM VERBUNDEN 32784
unix 3 [ ] STREAM VERBUNDEN 32783 /var/run/dovecot/logiin/default
unix 3 [ ] STREAM VERBUNDEN 32782
unix 3 [ ] STREAM VERBUNDEN 32777
unix 3 [ ] STREAM VERBUNDEN 32776
unix 3 [ ] STREAM VERBUNDEN 32775 /var/run/dovecot/logiin/default
unix 3 [ ] STREAM VERBUNDEN 32774
unix 3 [ ] STREAM VERBUNDEN 32771
unix 3 [ ] STREAM VERBUNDEN 32770
unix 3 [ ] STREAM VERBUNDEN 32539
unix 3 [ ] STREAM VERBUNDEN 32538
unix 2 [ ] DGRAM 32529
unix 2 [ ] DGRAM 10950
3
Installation and Upgrades / Re: ebox kills networking when enabling network module
« on: January 05, 2010, 11:04:16 pm »
There we go again. I upgraded my server and had the option to use plesk - but I was very quickly disappointed with it.
Now I'm trying to give ebox another shot, but I still get the same problem. I find this rather curious. I will try to fiddle with it some more then...
Now I'm trying to give ebox another shot, but I still get the same problem. I find this rather curious. I will try to fiddle with it some more then...
4
Installation and Upgrades / Re: ebox kills networking when enabling network module
« on: June 24, 2009, 10:58:09 pm »
I am sorry to say that I have not done any further research into this issue. I have configured my server manually, although that is a very time-consuming task. I expect it to be related to the configuration of the hidden network device that is used for the recovery console, but I do not really know what to look for. I wish you the best of luck in getting this issue solved, but personally I cannot afford to invest any more time into it.
5
Installation and Upgrades / Re: ebox kills networking when enabling network module
« on: November 13, 2008, 07:01:41 am »
I think I'm still going for the manual set-up, there isn't really all that much to set up for me anyway. I'd like to figure out what's wrong as well though in case there are other strato customers wanting to use ebox.
It's the latest kernel from the ubuntu repositories - at least I updated it before installing ebox. I did not reboot the server after that though. uname -a gives this:
I think I will ask strato support about what changes they have made to the default (network) configuration. They have made changes to the grub menu, so they have probably changed other things as well.
It's the latest kernel from the ubuntu repositories - at least I updated it before installing ebox. I did not reboot the server after that though. uname -a gives this:
Quote
Linux h1434680 2.6.24-16-server #1 SMP Thu Apr 10 13:58:00 UTC 2008 i686 GNU/Linux
I think I will ask strato support about what changes they have made to the default (network) configuration. They have made changes to the grub menu, so they have probably changed other things as well.
6
Installation and Upgrades / Re: ebox kills networking when enabling network module
« on: November 12, 2008, 06:43:53 pm »
I am starting to think that ebox is not for me after all. It seemed so nice... but it does not support SSH, and it keeps disabling the network connectivity when enabling the network module. I've even tried disabling all firewall rules as outlined in the following post: http://forum.eboxplatform.com/index.php?topic=205.0.
I suppose I will have to set up my services manually.
Thank you for your patience, mine has run out :/
I suppose I will have to set up my services manually.
Thank you for your patience, mine has run out :/
7
Installation and Upgrades / Re: ebox crashes/freezes my server when enabling network module
« on: November 12, 2008, 04:20:34 pm »
Okay, I just tried it again. Network interface is NOT set as external. Top in the recovery console shows this, when sorting by process status:
What do you think I should do now? I can only access the server through the recovery console, how do I undo the damage? Reinstalling takes 30-45 minutes, and I'd rather not have to wait on that but get on with the installation
Edit: nevrmind, I just reinstalled the server. I do hope that I get it running with ebox sometime soon though.
Code: [Select]
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
22825 ebox 20 0 0 0 0 Z 0.0 0.0 0:01.07 ebox-glob <defunct>
22842 ebox 20 0 0 0 0 Z 0.0 0.0 0:01.13 ebox-glob <defunct>
What do you think I should do now? I can only access the server through the recovery console, how do I undo the damage? Reinstalling takes 30-45 minutes, and I'd rather not have to wait on that but get on with the installation
Edit: nevrmind, I just reinstalled the server. I do hope that I get it running with ebox sometime soon though.
8
Installation and Upgrades / Re: ebox crashes/freezes my server when enabling network module
« on: November 12, 2008, 11:38:43 am »
I am using the ebox build from the hardy repository as outlined in the installation manual http://ebox-platform.com/community/installation-guide/
. I believe the version is 0.12.
I did not enable the firewall module, so I don't think that's it. Also I was able to log in remotely through a recovery console which is placed on the same network. But when I did login, the whole system was somewhat sluggish. That was the first time though, when I basically installed everything I could get
I could not log in directly from my home computer though, so maybe it was the firewall after all.
I will try again when I get back home. Can you already tell me what line should be added in case it helps?
Thanks again for helping me out.
. I believe the version is 0.12.
I did not enable the firewall module, so I don't think that's it. Also I was able to log in remotely through a recovery console which is placed on the same network. But when I did login, the whole system was somewhat sluggish. That was the first time though, when I basically installed everything I could get
I could not log in directly from my home computer though, so maybe it was the firewall after all.
I will try again when I get back home. Can you already tell me what line should be added in case it helps?
Thanks again for helping me out.
9
Installation and Upgrades / Re: ebox crashes my server when applying changes
« on: November 12, 2008, 07:45:23 am »
my interfaces file:
The server should have only a single interface with one IP address. At first I thought it might be because ebox tries to set up a DHCP server which the rest of the network doesn't like, but I don't really think that's it, since I did not install the dhcp package. But then again, when enabling the networking module it says something about enabling an DHCP hook. I don't reall understand what that means though :/
btw, if it wasn't clear from before, my server is placed in some big room with a whole bunch of other servers, none of which belong to me or should/can be controlled by me. As such it would be nice if ebox did not make any attempts to disturb the rest of the network (such as setting up it's own DHCP server).
Thank you for trying to help me, btw, it is very much appreciated
Quote
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
iface eth0 inet dhcp
The server should have only a single interface with one IP address. At first I thought it might be because ebox tries to set up a DHCP server which the rest of the network doesn't like, but I don't really think that's it, since I did not install the dhcp package. But then again, when enabling the networking module it says something about enabling an DHCP hook. I don't reall understand what that means though :/
btw, if it wasn't clear from before, my server is placed in some big room with a whole bunch of other servers, none of which belong to me or should/can be controlled by me. As such it would be nice if ebox did not make any attempts to disturb the rest of the network (such as setting up it's own DHCP server).
Thank you for trying to help me, btw, it is very much appreciated
10
Installation and Upgrades / ebox kills networking when enabling network module
« on: November 11, 2008, 11:37:17 pm »
I have rented a dedicated server from strato (http://strato.de/server/dedicated/power/index.html) running ubuntu 8.04. I have updated all packages and added the ebox repository. I installed ebox, enabled some modules and tried to save my changes. This results in an utterly unresponsive server. I have tried this twice now, with the same result.
The first time I installed all ebox packages, the second time I installed only the most necessary: no samba, vpn, dhcp, software etc., but only webserver, email, firewall, users and a few more. The first time I made a whole lot of changes, the second time I simply tried enabling the webserver as well as the users modules. Both times I had the same result, the server pretty much died when clicking "apply changes" in the top right.
EDIT: after playing around a bit, I have found that this happens whenever I enable the network module. After logging into ebox the first time, I do nothing else except for enabling that module. This will make the webserver stop responding, and I am unable to login with SSH from my home computer. I can still login remotely through the recovery console though, which is placed on the same network as the server.
Enabling the network module leaves two zombie processes. Killing the parent process (apache2 run by ebox user) and restarting networking and apache2 using the init.d script does not resolve the issue, not even after resetting the /etc/network/interfaces file to its original contents.
I am completely stumped as to how to solve this problem, please help :/
The first time I installed all ebox packages, the second time I installed only the most necessary: no samba, vpn, dhcp, software etc., but only webserver, email, firewall, users and a few more. The first time I made a whole lot of changes, the second time I simply tried enabling the webserver as well as the users modules. Both times I had the same result, the server pretty much died when clicking "apply changes" in the top right.
EDIT: after playing around a bit, I have found that this happens whenever I enable the network module. After logging into ebox the first time, I do nothing else except for enabling that module. This will make the webserver stop responding, and I am unable to login with SSH from my home computer. I can still login remotely through the recovery console though, which is placed on the same network as the server.
Enabling the network module leaves two zombie processes. Killing the parent process (apache2 run by ebox user) and restarting networking and apache2 using the init.d script does not resolve the issue, not even after resetting the /etc/network/interfaces file to its original contents.
I am completely stumped as to how to solve this problem, please help :/
Pages: [1]