Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
1
Installation and Upgrades / Re: Zentyal Freeradius + Cisco WLC
« on: November 16, 2013, 02:44:33 am »
I'm facing the same problem as you.Although different hardware. It seems Radius works realy well on zentyal 2.x but I've yet successfully done it in 3.0. Usually based on radius loq it would say that the user is entering the wrong password. I don't know why
2
Installation and Upgrades / Re: User Authentication on proxy/squid (Zentyal 3.2)
« on: October 25, 2013, 11:02:06 am »
Thanks for the info.
Its look like I'm sticking to version 2.2 until i get more understading about 3.x features
Its look like I'm sticking to version 2.2 until i get more understading about 3.x features
3
Installation and Upgrades / Re: User Authentication on proxy/squid (Zentyal 3.2)
« on: October 23, 2013, 11:37:07 am »
The problem is not all my users will be included/members in the domain. Or is it a must that the client must be member of the domain?
Sorry but its really confusing
Sorry but its really confusing
4
Installation and Upgrades / [SOLVED]User Authentication on proxy/squid (Zentyal 3.2)
« on: October 23, 2013, 05:52:17 am »
Hi,
Last time i use zentyal was on version 2.2 and on that version to configure proxy/squid to authenticate user is the option on the proxy page to authorize and allow etc.
How to do this in zentyal 3.2? I'm reading the documentation but still dont gets it. Can anyone help.
Thanks
Last time i use zentyal was on version 2.2 and on that version to configure proxy/squid to authenticate user is the option on the proxy page to authorize and allow etc.
How to do this in zentyal 3.2? I'm reading the documentation but still dont gets it. Can anyone help.
Thanks
5
Installation and Upgrades / Re: Internet Explorer Certificate error with Captive Portal
« on: October 23, 2013, 02:47:16 am »
I dont't think its possible.
I have asked on the forum before
http://forum.zentyal.org/index.php/topic,8098.msg33786.html#msg33786
its seems nobody know how to force the CP login page to http.
I have asked on the forum before
http://forum.zentyal.org/index.php/topic,8098.msg33786.html#msg33786
its seems nobody know how to force the CP login page to http.
6
Installation and Upgrades / Joining Windows Client to Zentayal 3.x Radius
« on: October 23, 2013, 02:40:31 am »
Hi,
I''m a newbie in Zentyal Radius.
I'm unable to connect windows client to zentyal radius.
Linux and android client works just fine.
Tried the workaround from this post http://forum.zentyal.org/index.php?topic=8336.0 but still does not work.
The zentyal log says that the login is incorrect.
Can someone help?
Thank You in advance
I''m a newbie in Zentyal Radius.
I'm unable to connect windows client to zentyal radius.
Linux and android client works just fine.
Tried the workaround from this post http://forum.zentyal.org/index.php?topic=8336.0 but still does not work.
The zentyal log says that the login is incorrect.
Can someone help?
Thank You in advance
7
Installation and Upgrades / Internal Firewall Not Working
« on: May 17, 2012, 03:52:32 am »
I have some problem
This is my config
WAN - 192.168.0.x/24
eth0(vlan1) - 192.168.1.0/24
eth0(vlan2) - 192.168.2.0/24
Eveything works well.
But I'm tring to restrict VLAN1 from communicating with VLAN 2.
Try to use Internal Firewall using Network Object but client can still ping each other.
I have deleted the default any to any rule by the way.
Am I doing something wrong here?
This is my config
WAN - 192.168.0.x/24
eth0(vlan1) - 192.168.1.0/24
eth0(vlan2) - 192.168.2.0/24
Eveything works well.
But I'm tring to restrict VLAN1 from communicating with VLAN 2.
Try to use Internal Firewall using Network Object but client can still ping each other.
I have deleted the default any to any rule by the way.
Am I doing something wrong here?
8
Installation and Upgrades / Re: Zentyal Server with two WANs
« on: May 16, 2012, 09:22:18 pm »
Hi,
I'm no expert but I'm pretty sure that by default Zentyal does not allow routing / traffic between 2 WAN,
I thing you have to make changes in the firewall configuration.
But I'll try to check it tomorrow in the office.
I'm no expert but I'm pretty sure that by default Zentyal does not allow routing / traffic between 2 WAN,
I thing you have to make changes in the firewall configuration.
But I'll try to check it tomorrow in the office.
9
Installation and Upgrades / Limit Bandwidth usage on proxy
« on: May 16, 2012, 09:15:14 pm »
Hi,
I really like the limit bandwidth usage available on Captive Portal.
Can the same thing be done to the user using the proxy?
OR is it implemented already when we set the limit on the Captive Portal?
Thanks
I really like the limit bandwidth usage available on Captive Portal.
Can the same thing be done to the user using the proxy?
OR is it implemented already when we set the limit on the Captive Portal?
Thanks
10
Installation and Upgrades / Re: Captive Portal Question
« on: September 30, 2011, 09:10:51 am »
From my experience using it in 2.2
1. Does enabling Captive Portal Service will force all users to authenticate to be able to access the internet?
In my case yes and you must select which group of users can use the captive portal,Default is all can
2. Using Captive Portal, is it possible to Create an Object (Group of People) and limit their bandwidth usage thru Captive Portal?
I think you could limit how bandwidth they are consuming in months on the captive portal setting
1. Does enabling Captive Portal Service will force all users to authenticate to be able to access the internet?
In my case yes and you must select which group of users can use the captive portal,Default is all can
2. Using Captive Portal, is it possible to Create an Object (Group of People) and limit their bandwidth usage thru Captive Portal?
I think you could limit how bandwidth they are consuming in months on the captive portal setting
11
Installation and Upgrades / Re: Customizing Captive portal on Zentyal 2.2
« on: September 30, 2011, 09:02:38 am »
Because the login page will cause ie & firefox alert regarding untrusted certified for the https connection
Of course they could choose to allow the connection,but for beginners this confuses them
Is there any way to solve this?
Of course they could choose to allow the connection,but for beginners this confuses them
Is there any way to solve this?
12
Installation and Upgrades / Re: 2 Wan Connections & 1 Lan
« on: September 26, 2011, 10:15:39 am »
Please make sure you make the range that the dhcp server can take.
On the dhcp tab/interface you can add the range on the enabled lan interface.
I make a mistake once by enabling the dhcp without adding the range and the dhcp server cannot be started
On the dhcp tab/interface you can add the range on the enabled lan interface.
I make a mistake once by enabling the dhcp without adding the range and the dhcp server cannot be started
13
Installation and Upgrades / Re: Customizing Captive portal on Zentyal 2.2
« on: September 20, 2011, 06:51:25 am »
never mind.
I have found the template @ /usr/share/zentyal/templates/captiveportal
Now the only problem if i could make the login go through http and not https. It would be perfect
I have found the template @ /usr/share/zentyal/templates/captiveportal
Now the only problem if i could make the login go through http and not https. It would be perfect
14
Installation and Upgrades / Customizing Captive portal on Zentyal 2.2
« on: September 20, 2011, 05:56:29 am »
Hi just testing captive portal 2.2.
Works like a charm. Thank you zentyal for this feature.
I would like to ask how do we customize the login page for the captive portal.
I need to display some disclaimer and maybe my contact so that out staff knows
how to get an account for wireless access.
Thanks very much
Works like a charm. Thank you zentyal for this feature.
I would like to ask how do we customize the login page for the captive portal.
I need to display some disclaimer and maybe my contact so that out staff knows
how to get an account for wireless access.
Thanks very much
Pages: [1]