Recent Posts

Pages: [1] 2 3 ... 10
1
Hello,
I want to add one domain-wide GPO rule on a Zentyal7 samba/AD server to prevent any updates for Thunderbird on all local Windows clients, since the update usually breaks a lot of perfectly working stuff.

What is the easiest way, preferably from the command line in Linux, to do this ?
Currently, I only know that the following registry value is doing this, but for each client only, not domain-wide :

Code: [Select]
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Mozilla\Thunderbird]
"DisableAppUpdate"=dword:00000001

... and I don't want to run to each client computer and add this registry value by hand, when some domain-wide rule could do it.
2
Spanish / Re: Error Samba, ya no funcionan los permisos
« Last post by aarcos on January 13, 2022, 02:30:54 pm »
Hola ayepes2003

Trata de postear  en ingles, el equipo de Zentyal responde normalmente!!! pero en esa lengua

Lo mejor
3
I did find a way to do this:

  • Add new virtual interface with IP address in the new network (not that IP the server should have)
  • Logg in to the new IP address via webb GUI
  • Set the new IP for default gateway
  • Change to the new IP address under Network Interface
  • Remove the virtual interface created in first point
4
Installation and Upgrades / Re: odd issue with bind?
« Last post by killmasta93 on January 11, 2022, 11:34:42 pm »
Thanks for the reply, it seems that changing the DNS forwarders to my pfsense seemed to fix the issue
5
Hi,
I have installed som Zentyal servers with Active Directory and DNS. Now we have rebuilt our networks and I have to move the servers to a new network. I have to set new IP addresses and set new default gateway.
How could I do this?

I have tested to change the IP in /etc/network/interfaces and I can connect to the the new IP address on the new network via the web GUI. I cannot change the IP and DGW because som error messages.

/Pelle H

Zentyal 7.0
Installed on Ubuntu 20.04
6
Other modules / Zentyal 7.0 DHCP error
« Last post by randyrf on January 08, 2022, 06:21:24 am »
Server is working fine, but on dashboard it says DHCP module installed incorrectly.   run command
sudo dpkg --configure -a to correct.

Tried running command but still have errer.   Tried restarting program.

The network is currently using the DHCP server from the ROUTER, so it's not necessary, but I don't even see it as an option to configurer / enable or disable.

Thanks!
7
Email and Groupware / Forward incoming messages not working
« Last post by bogart on January 06, 2022, 04:51:59 pm »
Hello. I need help with my Zentyal 7 - Development edition.

Forward incoming messages is not working when it is checked.

Appreciate your help. Thanks.
8
Installation and Upgrades / Re: firewall drop all from internal to ppp0
« Last post by denis.robel on January 06, 2022, 10:39:27 am »
Hallo,

I fount the reason for that problem:
Zentyal Virtualization Manager takes some influence to the firewall....

When I deactivate it then everything works well. I made no changes on the firewall settings.

That's very ugly.  >:(

Can anybody of Zentyal Dev team check this behaviour?

By the way it's very quiet here for a few weeks.Is Zentyal still alive?
9
Installation and Upgrades / Re: firewall drop all from internal to ppp0
« Last post by denis.robel on January 04, 2022, 04:39:33 pm »
Hallo and a happy new year at first...

my problem is still existing:
Code: [Select]
Jan  4 16:31:35 zentyal2 kernel: [111189.117911] zentyal-firewall drop IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:80:e8:2c:75:fb:66:08:00 SRC=192.168.1.115 DST=255.255.255.255 LEN=36 TOS=0x00 PREC=0x00 TTL=128 ID=21928 PROTO=UDP SPT=63887 DPT=3956 LEN=16
Jan  4 16:31:36 zentyal2 kernel: [111189.769917] zentyal-firewall drop IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:80:e8:2c:75:fb:66:08:00 SRC=192.168.1.115 DST=255.255.255.255 LEN=36 TOS=0x00 PREC=0x00 TTL=128 ID=21929 PROTO=UDP SPT=63888 DPT=3956 LEN=16
Jan  4 16:31:37 zentyal2 kernel: [111191.143295] zentyal-firewall drop IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:80:e8:2c:75:fb:66:08:00 SRC=192.168.1.115 DST=255.255.255.255 LEN=36 TOS=0x00 PREC=0x00 TTL=128 ID=21930 PROTO=UDP SPT=63887 DPT=3956 LEN=16
Jan  4 16:31:39 zentyal2 kernel: [111193.173649] zentyal-firewall drop IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:80:e8:2c:75:fb:66:08:00 SRC=192.168.1.115 DST=255.255.255.255 LEN=36 TOS=0x00 PREC=0x00 TTL=128 ID=21932 PROTO=UDP SPT=63887 DPT=3956 LEN=16
Jan  4 16:31:40 zentyal2 kernel: [111193.830152] zentyal-firewall drop IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:80:e8:2c:75:fb:66:08:00 SRC=192.168.1.115 DST=255.255.255.255 LEN=36 TOS=0x00 PREC=0x00 TTL=128 ID=21933 PROTO=UDP SPT=63888 DPT=3956 LEN=16
Jan  4 16:31:41 zentyal2 kernel: [111195.203753] zentyal-firewall drop IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:80:e8:2c:75:fb:66:08:00 SRC=192.168.1.115 DST=255.255.255.255 LEN=36 TOS=0x00 PREC=0x00 TTL=128 ID=21934 PROTO=UDP SPT=63887 DPT=3956 LEN=16

How can I fix this issue?

my network configuration is

internal network <-> eth1 <-> zentyal <-> eth0 <-> eth0.7 <->ppp0 <-> internet

Network access from Zentyal is working fine but from internal network packages are dropped by firewall.

I have firewall rules for internal network to external but it seems that the rules are not working.
10
Directory and Authentication / How to Promote ADC to DC Zentyal 7.0
« Last post by ardiantotan on January 04, 2022, 06:09:50 am »
Hello,

I want to promote my Additional Domain Controller to Domain Controller
i try to use FSMO role, change the domain controller from Windows Server Management 2016 but my additional domain controller can not change to domain controller

Anyone can suggest me the step to do it?
Thank you for your reply :)
Pages: [1] 2 3 ... 10