Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
1
Installation and Upgrades / Is it possible to restore a 3.5 backup in a fresh 4.0 installation ?
« on: December 03, 2014, 02:51:41 pm »
I just lost my 3.5 zentyal configuration after a software update.
I can access the machine but network is not working anymore.
I asked for support on Zentyal but 3.5 is no longer supported.
Can I backup my 3.5 configuration and restore in 4.0 new machine ?
I can access the machine but network is not working anymore.
I asked for support on Zentyal but 3.5 is no longer supported.
Can I backup my 3.5 configuration and restore in 4.0 new machine ?
2
Installation and Upgrades / How to reset zentyal ldap master password
« on: February 22, 2011, 12:08:33 am »
Hi folks,
I would like to access the ldap tree but I don't know the ldap master password.
How can I reset it ?
Thanks in advance,
Josir Gomes
I would like to access the ldap tree but I don't know the ldap master password.
How can I reset it ?
Thanks in advance,
Josir Gomes
3
Installation and Upgrades / Migrate from Ebox (Samba 2) to Zentyal (Samba 3)
« on: February 21, 2011, 11:50:53 pm »
Hi folks,
I use ebox for several years but now I have to migrate to Samba 3 due to Windows 7 machines authentications. Before give up and buy a Windows Server, I will try to make a last shot.
My strategy (based on [1]):
- Install a Zentyal as BDC (Backup Domain Controller)
- Copy users from PDC (ebox) to BDC
- Disable ebox machine
- Test
1) After Zentyal installation, I did not enable File Server
2) Change file /usr/share/ebox/stubs/samba/smb.conf.mas to indicate that Zentyal will be a BDC
domain logons = Yes
os level = 35
preferred master = No
domain master = No
3) Yet on this file, I change the domain name and hostname
workgroup = MEDIASYS
netbios name = LINUX13
4) Via web interface, I started the File Server service and then verify if it is really a BDC with command:
testparm
5) Enter the main domain:
net rpc join -S 192.168.0.11 -Ujosir%xxxx
where 192.168.0.11 is the ebox server.
6) I stopped here: how to import users and machines ?
Some guys said that the best solution is to do a ldap replication [2]
But I think this is not going to work becaus zentyal and ebox seems to have a different ldap tree.
I am also thinking about to make a script to create all users and reset all password on new server.
So, if someone has any glue I appreciate.
Josir.
[1] http://www.enterprisenetworkingplanet.com/netos/article.php/3457461
[2] http://groups.google.com/group/linux.samba/browse_thread/thread/bbd71cc519f969d8?hl=en
I use ebox for several years but now I have to migrate to Samba 3 due to Windows 7 machines authentications. Before give up and buy a Windows Server, I will try to make a last shot.
My strategy (based on [1]):
- Install a Zentyal as BDC (Backup Domain Controller)
- Copy users from PDC (ebox) to BDC
- Disable ebox machine
- Test
1) After Zentyal installation, I did not enable File Server
2) Change file /usr/share/ebox/stubs/samba/smb.conf.mas to indicate that Zentyal will be a BDC
domain logons = Yes
os level = 35
preferred master = No
domain master = No
3) Yet on this file, I change the domain name and hostname
workgroup = MEDIASYS
netbios name = LINUX13
4) Via web interface, I started the File Server service and then verify if it is really a BDC with command:
testparm
5) Enter the main domain:
net rpc join -S 192.168.0.11 -Ujosir%xxxx
where 192.168.0.11 is the ebox server.
6) I stopped here: how to import users and machines ?
Some guys said that the best solution is to do a ldap replication [2]
But I think this is not going to work becaus zentyal and ebox seems to have a different ldap tree.
I am also thinking about to make a script to create all users and reset all password on new server.
So, if someone has any glue I appreciate.
Josir.
[1] http://www.enterprisenetworkingplanet.com/netos/article.php/3457461
[2] http://groups.google.com/group/linux.samba/browse_thread/thread/bbd71cc519f969d8?hl=en
4
Installation and Upgrades / [SOLVED] Install from KVM image is not working
« on: January 21, 2011, 09:48:11 pm »
Hi folks,
I am trying to run the kvm image but the vm is not recognizing the disk.
Here is my disk config:
<disk type='file' device='disk'>
<driver name='qemu' type='qcow2' />
<source file='/srv/Linux13.qcow2'/>
<target dev='hda' bus='ide'/>
</disk>
Does somebody have a virsh xml definition for the kvm image supplied by Zentyal ?
Thanks in advance,
Josir Gomes
I am trying to run the kvm image but the vm is not recognizing the disk.
Here is my disk config:
<disk type='file' device='disk'>
<driver name='qemu' type='qcow2' />
<source file='/srv/Linux13.qcow2'/>
<target dev='hda' bus='ide'/>
</disk>
Does somebody have a virsh xml definition for the kvm image supplied by Zentyal ?
Thanks in advance,
Josir Gomes
5
Installation and Upgrades / Error on Zentyal 2.02 New installation from ISO
« on: October 27, 2010, 11:08:58 pm »
Hi folks, I just tried to install from a fresh iso:
zentyal-2.0-2-amd64.iso
Installation stops with error on step: Install and select software
I guess that the installation could not find the software to download because I'm behind a proxy.
Then I open a new console and add /etc/apt/apt.conf
Acquire::http::proxy "http://192.168.0.1:3128/";
But it didn't work either.
Where can I find a log to try to find the problem ?
zentyal-2.0-2-amd64.iso
Installation stops with error on step: Install and select software
I guess that the installation could not find the software to download because I'm behind a proxy.
Then I open a new console and add /etc/apt/apt.conf
Acquire::http::proxy "http://192.168.0.1:3128/";
But it didn't work either.
Where can I find a log to try to find the problem ?
6
Installation and Upgrades / Zentyal 2.0 New server - step by step
« on: October 26, 2010, 04:24:05 pm »
Hi folks,
I am dead with an ebox 1.3 that is not working anymore and I intend to install a new box from scratch.
This is the plan:
1. Install Ubuntu and Zentyal 2.0. I just use Zentyal with Samba/LDAP Authentication.
2. I will not bother to type all users again - put someone to type is cheaper than dig for a solution (I use ebox/samba for 3 years and I never got a reasonable one).
3. And this is my question: What to do I have to do in order tonot have to register all windows machines in the new domain ? That is, I want that the win machines do not have to be registered again.
Does someone has any tip?
Thanks in advance,
Josir
I am dead with an ebox 1.3 that is not working anymore and I intend to install a new box from scratch.
This is the plan:
1. Install Ubuntu and Zentyal 2.0. I just use Zentyal with Samba/LDAP Authentication.
2. I will not bother to type all users again - put someone to type is cheaper than dig for a solution (I use ebox/samba for 3 years and I never got a reasonable one).
3. And this is my question: What to do I have to do in order tonot have to register all windows machines in the new domain ? That is, I want that the win machines do not have to be registered again.
Does someone has any tip?
Thanks in advance,
Josir
7
Installation and Upgrades / Network service does not start
« on: October 26, 2010, 01:31:49 am »
Hi folks, I did an upgrade from 1.2 to 1.3
After that I could not start the network service. Looking at ebox error log, I got:
But I don't have an eth2 interface!
root@linux11:/var/log/ebox# cat /etc/network/interfaces
How can I find and fix this problem ?
After that I could not start the network service. Looking at ebox error log, I got:
Code: [Select]
2010/10/25 20:22:23 INFO> Service.pm:625 EBox::Module::Service::restartService - Restarting service for module: network
2010/10/25 20:22:26 DEBUG> Network.pm:1011 EBox::Network::ifaceMethod - Interface eth2 não existe.
2010/10/25 20:22:26 ERROR> Service.pm:630 EBox::Module::Service::__ANON__ - Error restarting service: Interface eth2 não existe.
But I don't have an eth2 interface!
root@linux11:/var/log/ebox# cat /etc/network/interfaces
Code: [Select]
auto lo eth3
iface lo inet loopback
iface eth3 inet static
address 192.168.0.11
netmask 255.255.255.0
broadcast 192.168.0.255
How can I find and fix this problem ?
8
Installation and Upgrades / Upgrade from ebox 1.0 to 1.2
« on: October 08, 2010, 07:50:20 pm »
Hi folks,
Is there any step-by-step tutorial on how to upgrade an old ebox 1.0 installation to 1.2 ?
1. Alter the software sources to http://ppa.launchpad.net/ebox/1.2/ubuntu
2. sudo apt-get upgrade
Is there any other step?
Josir.
Is there any step-by-step tutorial on how to upgrade an old ebox 1.0 installation to 1.2 ?
1. Alter the software sources to http://ppa.launchpad.net/ebox/1.2/ubuntu
2. sudo apt-get upgrade
Is there any other step?
Josir.
9
Installation and Upgrades / Error after upgrade: Can't add new machines to the domain
« on: April 29, 2010, 08:36:10 pm »
Since some eBox update, we cannot join new Windows Client on the domain.
Oddly, I can add the machines manually:
smbldap-useradd -w "media100$"
Machine:
Ubuntu 8.04.4 LTS
Linux linux11 2.6.24-27-server #1 SMP Wed Jan 27 23:39:33 UTC 2010 x86_64 GNU/Linux
eBox version - File sharing 1.0.3-0ubuntu1~ppa1~hardy1
How can I "debug" the problem or provide more info in order to fix the problem ?
Thanks in advance,
Josir.
Oddly, I can add the machines manually:
smbldap-useradd -w "media100$"
Machine:
Ubuntu 8.04.4 LTS
Linux linux11 2.6.24-27-server #1 SMP Wed Jan 27 23:39:33 UTC 2010 x86_64 GNU/Linux
eBox version - File sharing 1.0.3-0ubuntu1~ppa1~hardy1
How can I "debug" the problem or provide more info in order to fix the problem ?
Thanks in advance,
Josir.
10
Installation and Upgrades / Accessing ebox fresh database with ldapsearch
« on: June 19, 2009, 01:40:26 am »
Hi folks,
I tried to access LDAP on a regular ebox installation but I got "ldap_bind: Invalid credentials (49)"
ldapsearch -x -D "cn=admin,dc=ebox" -W
I am using the same web interface password
What am I doing wrong?
I tried to access LDAP on a regular ebox installation but I got "ldap_bind: Invalid credentials (49)"
ldapsearch -x -D "cn=admin,dc=ebox" -W
I am using the same web interface password
What am I doing wrong?
11
Installation and Upgrades / Messing with LDAP and linux user
« on: June 18, 2009, 10:16:05 pm »
Hi folks,
I have a particular situation where I created a user for myself on LDAP ebox database but I've already had the same user on Linux. Now, I cannot grant add myself to groups or shares because of that.
I can login the domain but I don't have access to the shares.
Some logs:
root@linux11:~# id Josir
uid=2001(josir) gid=1901(__USERS__) groups=1901(__USERS__)
root@linux11:~# id josir
uid=1000(josir) gid=2001(Info) groups=2001(Info),4(adm),20(dialout),24(cdrom),25(floppy),29(audio),30(dip),44(video),46(plugdev),107(fuse),111(lpadmin),112(admin),131(sambashare),512(Domain Admins),513(Domain Users),544(Domain Computers)
Does somebody has a solution for that ?
Thanks in advance,
Josir Gomes
I have a particular situation where I created a user for myself on LDAP ebox database but I've already had the same user on Linux. Now, I cannot grant add myself to groups or shares because of that.
I can login the domain but I don't have access to the shares.
Some logs:
root@linux11:~# id Josir
uid=2001(josir) gid=1901(__USERS__) groups=1901(__USERS__)
root@linux11:~# id josir
uid=1000(josir) gid=2001(Info) groups=2001(Info),4(adm),20(dialout),24(cdrom),25(floppy),29(audio),30(dip),44(video),46(plugdev),107(fuse),111(lpadmin),112(admin),131(sambashare),512(Domain Admins),513(Domain Users),544(Domain Computers)
Does somebody has a solution for that ?
Thanks in advance,
Josir Gomes
12
Installation and Upgrades / File permission on directories
« on: June 15, 2009, 04:25:03 pm »
Hi folks,
I want to register which user save/modify files on shared directories. Is that possible ?
For example: In Linux, if I create a file on suid enabled sub-directory, I got:
>>ls -ls
total 4
4 drwxrwsr-x 3 ebox __USERS__ 4096 2009-06-15 11:13 Aplicacao
>>cd Aplicacao
>>echo josir > teste1.txt
>>ls -ls
total 8
4 -rw-r--r-- 1 josir __USERS__ 6 2009-06-15 11:11 teste1.txt
If I create a file on a Samba client (running on Linux and Windows), I got:
4 -rw-r--r-- 1 josir __USERS__ 6 2009-06-15 11:11 teste1.txt
0 -rwxrw-rw- 1 root __USERS__ 0 2009-06-15 11:22 teste2.txt
Is it possible to write the correct name using ebox/LDAP/Samba ?
Thanks in advance,
Josir Gomes
I want to register which user save/modify files on shared directories. Is that possible ?
For example: In Linux, if I create a file on suid enabled sub-directory, I got:
>>ls -ls
total 4
4 drwxrwsr-x 3 ebox __USERS__ 4096 2009-06-15 11:13 Aplicacao
>>cd Aplicacao
>>echo josir > teste1.txt
>>ls -ls
total 8
4 -rw-r--r-- 1 josir __USERS__ 6 2009-06-15 11:11 teste1.txt
If I create a file on a Samba client (running on Linux and Windows), I got:
4 -rw-r--r-- 1 josir __USERS__ 6 2009-06-15 11:11 teste1.txt
0 -rwxrw-rw- 1 root __USERS__ 0 2009-06-15 11:22 teste2.txt
Is it possible to write the correct name using ebox/LDAP/Samba ?
Thanks in advance,
Josir Gomes
13
Installation and Upgrades / File ownership on user files
« on: June 09, 2009, 05:28:46 pm »
Hi folks,
my ebox/samba installation was successfull and user/groups are working fine either. Now it's fine tuning time:
Some users create files to test but the ownership don't belong to them.
root@linux11:/home/samba/shares/Aplicacao# ls -ls
total 16
4 drwxrwxr-x 2 root josir 4096 2009-06-08 22:11 Acentuação
4 -rwxrwxrwx 1 root root 6 2009-04-07 19:01 josir.txt
4 drwxrwxr-x 2 root josir 4096 2009-04-07 19:57 Teste
4 drwxrwxr-x 2 root __USERS__ 4096 2009-06-09 12:16 teste isnard
root@linux11:/home/samba/shares/Aplicacao# groups isnard
__USERS__ Domain Users Info Users
How can I make users take ownership on files created by them ?
Thanks in advance,
Josir Gomes
my ebox/samba installation was successfull and user/groups are working fine either. Now it's fine tuning time:
Some users create files to test but the ownership don't belong to them.
root@linux11:/home/samba/shares/Aplicacao# ls -ls
total 16
4 drwxrwxr-x 2 root josir 4096 2009-06-08 22:11 Acentuação
4 -rwxrwxrwx 1 root root 6 2009-04-07 19:01 josir.txt
4 drwxrwxr-x 2 root josir 4096 2009-04-07 19:57 Teste
4 drwxrwxr-x 2 root __USERS__ 4096 2009-06-09 12:16 teste isnard
root@linux11:/home/samba/shares/Aplicacao# groups isnard
__USERS__ Domain Users Info Users
How can I make users take ownership on files created by them ?
Thanks in advance,
Josir Gomes
14
Installation and Upgrades / How to backup ebox ldap database
« on: May 25, 2009, 11:14:30 pm »
Hi folks, I've installed ebox only with ldap/samba services. Everything is working fine and users are happy.
But now I intended to plan a backup machine where I can copy all ldap info to this machine.
How is the best approach to do that with ebox ?
Thanks in advance.
Josir Gomes
Rio de Janeiro - Brasil
But now I intended to plan a backup machine where I can copy all ldap info to this machine.
How is the best approach to do that with ebox ?
Thanks in advance.
Josir Gomes
Rio de Janeiro - Brasil
Pages: [1]