Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - expertgeeks

Pages: 1 ... 5 6 [7] 8 9
91
Installation and Upgrades / Guest access warning [SOLVED]
« on: April 30, 2015, 12:48:14 pm »
Hi All.

I have a fresh install of Zentyal 4.1 and am currently setting up samba shares. I created a shared folder and ticked 'guest access' for that share (recursive ACL was enabled by default) and got the warning;

Quote
Domain guest account should be enabled for guest access to shares. You can enable it in the users and groups manager.

So I enabled the guest account, but when I went back to the 'File Sharing' section I am still getting the message. I cannot remove this warning. So far I have tried removing the shared folder, disabled guest account, re-enabled guest account and I still get the message. How do I get rid of this ?

92
Installation and Upgrades / Re: No screens found - lxdm
« on: July 15, 2014, 04:27:56 pm »
Code: [Select]
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 01@00:05:0
(II) [KMS] Kernel modesetting enabled.
(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
        compiled for 1.7.6, module version = 0.0.2
        ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon HD 4290" (ChipID = 0x9715)
(II) RADEON(0): PCI card detected
(WW) RADEON(0): Color tiling is not yet supported on R600/R700
(II) RADEON(0): KMS Color Tiling: disabled
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
(II) RADEON(0): Output VGA-0 has no monitor section
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): EDID for output VGA-0
(II) RADEON(0): EDID for output DVI-0
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output DVI-0 disconnected
(WW) RADEON(0): No outputs definitely connected, trying again...
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output DVI-0 disconnected
(WW) RADEON(0): Unable to find initial modes
(II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:8000000 visible:7ab2000
(II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
        compiled for 1.7.6, module version = 1.0.0
        ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules/libexa.so
(II) Module exa: vendor="X.Org Foundation"
        compiled for 1.7.6, module version = 2.5.0
        ABI class: X.Org Video Driver, version 6.0
(EE) RADEON(0): No modes.
(II) UnloadModule: "radeon"
(II) UnloadModule: "exa"
(II) Unloading /usr/lib/xorg/modules/libexa.so
(II) UnloadModule: "fb"
(II) Unloading /usr/lib/xorg/modules/libfb.so
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found
Please consult the The X.Org Foundation support
         at http://wiki.x.org
 for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

 ddxSigGiveUp: Closing log


Here's lspci
Code: [Select]
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge Alternate
00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx)
00:09.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 4)
00:0a.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 5)
00:11.0 RAID bus controller: ATI Technologies Inc SB700/SB800 SATA Controller [Non-RAID5 mode] (rev 40)
00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 42)
00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller (rev 40)
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller (rev 40)
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40)
00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller
00:15.0 PCI bridge: ATI Technologies Inc Device 43a0
00:15.1 PCI bridge: ATI Technologies Inc Device 43a1
00:16.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:16.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control
01:05.0 VGA compatible controller: ATI Technologies Inc Device 9715
01:05.1 Audio device: ATI Technologies Inc RS880 Audio Device [Radeon HD 4200]
02:00.0 USB Controller: Device 1b6f:7023 (rev 01)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)

93
Installation and Upgrades / No screens found - lxdm
« on: July 15, 2014, 04:27:33 pm »
Hi,

I recently rebooted my Zentyal 2.2 64 bit server, but when it came back up LXDM refuses to start. Checking out the lxdm.log shows;

Code: [Select]
(II) [KMS] Kernel modesetting enabled.
(EE) RADEON(0): No modes.
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

Please consult the The X.Org Foundation support
         at http://wiki.x.org
 for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

 ddxSigGiveUp: Closing log

Normally at this point I'd start poking about with /etc/X11/xorg.conf, but it appears Zentyal doesn't use it... nor can I find anything in the documentation how lxde/dm is configured in Zentyal.

Here's the full /var/log/Xorg.0.log
Code: [Select]
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.42-37-generic x86_64 Ubuntu
Current Operating System: Linux supported 2.6.32-62-generic #126-Ubuntu SMP Fri Jul 4 20:20:23 UTC 2014 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-62-generic root=UUID=d8434725-6576-41d5-96f1-b0fc8d5c8aee ro
Build Date: 11 April 2013  01:20:21PM
xorg-server 2:1.7.6-2ubuntu7.12 (For technical support please see http://www.ubuntu.com/support)
Current version of pixman: 0.16.4
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jul 15 15:16:31 2014
(==) Using config directory: "/usr/lib/X11/xorg.conf.d"
(==) No Layout section.  Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) |   |-->Monitor "<default monitor>"
(==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
        Entry deleted from font path.
(WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
        Entry deleted from font path.
(==) FontPath set to:
        /usr/share/fonts/X11/misc,
        /usr/share/fonts/X11/100dpi/:unscaled,
        /usr/share/fonts/X11/75dpi/:unscaled,
        /usr/share/fonts/X11/Type1,
        /usr/share/fonts/X11/100dpi,
        /usr/share/fonts/X11/75dpi,
        built-ins
(==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x7cb860
(II) Module ABI versions:
        X.Org ANSI C Emulation: 0.4
        X.Org Video Driver: 6.0
        X.Org XInput driver : 7.0
        X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:1:5:0) 1002:9715:1458:d000 ATI Technologies Inc rev 0, Mem @ 0xd8000000/134217728, 0xfdee0000/65536, 0xfdd00000/1048576, I/O @ $
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
        compiled for 1.7.6, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
        compiled for 1.7.6, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
        compiled for 1.7.6, module version = 1.0.0
        ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
        compiled for 1.7.6, module version = 1.13.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
        compiled for 1.7.6, module version = 1.0.0
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
        compiled for 1.7.6, module version = 1.1.0
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(==) Matched ati as autoconfigured driver 0
(==) Matched vesa as autoconfigured driver 1
(==) Matched fbdev as autoconfigured driver 2
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
        compiled for 1.7.6, module version = 6.13.0
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
        compiled for 1.7.6, module version = 6.13.0
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
        compiled for 1.7.6, module version = 2.3.0
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
        compiled for 1.7.6, module version = 0.4.1
        ABI class: X.Org Video Driver, version 6.0
(II) RADEON: Driver for ATI Radeon chipsets:
        ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
        ATI Radeon Mobility X300 (M24) 3152 (PCIE),
        ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
        ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
        ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
        ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
        ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
        ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
        ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
        ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
        ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
        ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
        ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
        ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
        ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
        ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
        ATI Radeon X800PRO (R420) JI (AGP),
        ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
        ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
        ATI Radeon Mobility 9800 (M18) JN (AGP),
        ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
        ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
        ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
        ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
        ATI Radeon Mobility M7 LW (AGP),
        ATI Mobility FireGL 7800 M7 LX (AGP),
        ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
        ATI FireGL Mobility 9000 (M9) Ld (AGP),
        ATI Radeon Mobility 9000 (M9) Lf (AGP),
        ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
        ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
        ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
        ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
        ATI Radeon 9800XT NJ (AGP),
        ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
        ATI Radeon Mobility 9600 (M10) NQ (AGP),
        ATI Radeon Mobility 9600 (M11) NR (AGP),
        ATI Radeon Mobility 9600 (M10) NS (AGP),
        ATI FireGL Mobility T2 (M10) NT (AGP),
        ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
        ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
        ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
        ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
        ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
        ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
        ATI Radeon Mobility X300 (M22) 5460 (PCIE),
        ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
        ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
        ATI Radeon X800PRO (R423) UI (PCIE),
        ATI Radeon X800LE (R423) UJ (PCIE),
        ATI Radeon X800SE (R423) UK (PCIE),
        ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
        ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
        ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
        ATI FireGL unknown (R423) UR (PCIE),
        ATI FireGL unknown (R423) UT (PCIE),
        ATI Mobility FireGL V5000 (M26) (PCIE),
        ATI Mobility FireGL V5000 (M26) (PCIE),
        ATI Mobility Radeon X700 XL (M26) (PCIE),
        ATI Mobility Radeon X700 (M26) (PCIE),
        ATI Mobility Radeon X700 (M26) (PCIE),
        ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
        ATI Radeon Mobility 9100 IGP (U3) 5835,
        ATI Radeon XPRESS 200 5954 (PCIE),
        ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
        ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
        ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
        ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
        ATI Radeon XPRESS 200M 5975 (PCIE),
        ATI Radeon XPRESS 200 5A41 (PCIE),
        ATI Radeon XPRESS 200M 5A42 (PCIE),
        ATI Radeon XPRESS 200 5A61 (PCIE),
        ATI Radeon XPRESS 200M 5A62 (PCIE),
        ATI Radeon X300 (RV370) 5B60 (PCIE),
        ATI Radeon X600 (RV370) 5B62 (PCIE),
        ATI Radeon X550 (RV370) 5B63 (PCIE),
        ATI FireGL V3100 (RV370) 5B64 (PCIE),
        ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
        ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
        ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
        ATI Mobility Radeon X800 XT (M28) (PCIE),
        ATI Mobility FireGL V5100 (M28) (PCIE),
        ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
        ATI Radeon X850 XT PE (R480) (PCIE),
        ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
        ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
        ATI Radeon X850 XT (R480) (PCIE),
        ATI Radeon X800XT (R423) 5D57 (PCIE),
        ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
        ATI Radeon X700 PRO (RV410) (PCIE),
        ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
        ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
        ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
        ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
        ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
        ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
        ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
        ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
        ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
        ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
        ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
        ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
        ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
        ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
        ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
        ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
        ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
        ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
        ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
        ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
        ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
        ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
        ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
        ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
        ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
        ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
        ATI Mobility Radeon X1700, ATI Radeon X2300HD,
        ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
        ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
        ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
        ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
        ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
        ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
        ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
        ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
        ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
        ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
        ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
        ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
        ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
        ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
        ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
        ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
        ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
        ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
        ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
        ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
        AMD FireStream 9250, ATI FirePro V8700 (FireGL),
        ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
        ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
        ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
        ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
        ATI Mobility Radeon HD 4670, ATI FirePro M5750,
        ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
        ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
        ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
        ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
        ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
        ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
        ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
        ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
        ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
        ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
        ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
        ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
        ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
        ATI Mobility Radeon HD 3850 X2, ATI RV670,
        ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
        ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
        ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
        ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
        ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
        ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
        ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
        ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
        ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
        ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
        ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
        ATI FireGL V3600, ATI Radeon HD 2600 LE,
        ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
        ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
        ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
        ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
        ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
        ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
        ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
        ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
        ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
        ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
        ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
        ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
        ATI Radeon 3000 Graphics, ATI Radeon HD 4200, ATI Radeon 4100,
        ATI Mobility Radeon HD 4200, ATI Mobility Radeon 4100,
        ATI Radeon HD 4290, ATI Radeon HD 4290, CYPRESS,
        ATI FirePro (FireGL) Graphics Adapter,
        ATI FirePro (FireGL) Graphics Adapter,
        ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5800 Series,
        ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
        ATI Radeon HD 5900 Series, ATI Radeon HD 5900 Series,
        ATI Mobility Radeon HD 5800 Series,
        ATI Mobility Radeon HD 5800 Series,
        ATI FirePro (FireGL) Graphics Adapter,
        ATI FirePro (FireGL) Graphics Adapter,
        ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
        ATI Radeon HD 5700 Series, ATI Radeon HD 5700 Series,
        ATI Mobility Radeon HD 5000 Series,
        ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
        ATI FirePro (FireGL) Graphics Adapter,
        ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
        ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
        ATI Mobility Radeon HD 5000 Series,
        ATI Mobility Radeon HD 5000 Series, CEDAR, CEDAR, CEDAR,
        ATI FirePro (FireGL) Graphics Adapter,
        ATI FirePro (FireGL) Graphics Adapter, CEDAR, ATI Radeon HD 5450,
        CEDAR
...continued in next post

94
That's great ! Thanks very much :D

95
Apologies for necroposting.. but does anyone have the import scripts to migrate 2.2 > 3.0 ?

This post https://forum.zentyal.org/index.php?topic=13862.0 and others refer to
http://trac.zentyal.org/wiki/Documentation/Community/Migrate_2.2_to_3.0 but the wiki that replaces it just returns to the main page https://wiki.zentyal.org/wiki/Zentyal_Wiki...

I managed to find the instructions in the archive.org archives http://web.archive.org/web/20121231065511/http://trac.zentyal.org/wiki/Documentation/Community/Migrate_2.2_to_3.0? but all the githubs links fail. Can someone please repost the scripts to pastebin or similar ?

Thanks !

96
Glad to hear you got this fixed. Can you please change the subject of your original post so that it start with

[SOLVED] Access to Webmin...

to help other users with the same problem find your posts? Thanks.

97
Installation and Upgrades / Re: Mapping file shares
« on: March 05, 2012, 02:37:58 pm »
If you add a pause statement after 'echo off' at the top of zentyal-logon.bat, and login to the domain, do you see the paused command window ?

98
Installation and Upgrades / Re: Mapping file shares
« on: March 04, 2012, 06:02:53 pm »
Open up a command window (WinKey+R, type cmd & hit enter) and try calling the scripts via that. See what errors you get when running the scripts, and why the vbscripts aren't running for you..
Code: [Select]
call \\servername\netlogon\logon.bat
call \\servername\netlogon\net_drives.vbs
call \\servername\netlogon\printers.vbs


99
Installation and Upgrades / Re: Mapping file shares
« on: March 02, 2012, 05:07:40 pm »
the correct path should be;

\\servername\netlogon\logon.bat

100
Installation and Upgrades / Safe to remove amavis user ?
« on: March 02, 2012, 02:58:54 pm »
I have lots of errors logged in the postgresql logs for the mailfilter and amavis authentication. This started after re-installing the users and groups module, the amavis user authentication has not worked since. The amavis user does not appear in the UI list of users, I can't find the amavis user in the LDAP database either.. Removing the module leaves the user in /etc/passwd which then appears to conflict with re-installing the mailfilter module.. I want to remove the user so it can be recreated when the zentyal mailfilter module is re-installed.

N.B. The same appears to be the case for the roundcube user, and problems I had re-installing the webmail module as well.

I'm obviously wary of removing a user without using the Zentyal UI. How can I safely remove / fix a system user without breaking LDAP synchronisation? Thanks!

101
Installation and Upgrades / Re: Mapping file shares
« on: March 02, 2012, 02:18:54 pm »
If you're still having problems, you could try calling the batch script from the zentyal-logon.bat..
i.e.
Code: [Select]
call \\<server-name>\netlogon\batch_script.batMine is called between 'set Win7.Minor=1' and 'set Version=' in zentyal-logon.bat

N.B. You'll also need to add the same call function at the same point into the logon.bat.mas file to stop it getting overwritten by zentyal when making changes.
Code: [Select]
sudo nano /etc/zentyal/stubs/samba/logon.bat.mas
FYI, Instead of using Ifmember, my login script attempts to map the drives but moves on if a drive fails to map (On Error Resume Next). That way each user gets an attempt to map all the drives, if they don't have permission, they don't get mapped. Here are my login scripts, hopefully some of the info will be of use..

batch_script.bat
Code: [Select]
echo off
echo Setting PC Clock to Network Time
net time \\<server-name> /set /y

echo Setting up network shares, please standby...

call \\<server-name>\netlogon\net_drives.vbs
call \\<server-name>\netlogon\printers.vbs

echo Setup now complete. Script exiting...

net_drives.vbs
Code: [Select]
' VBScript source code
Option Explicit
On Error Resume Next

Dim oNet

Set oNet = CreateObject("WScript.Network")

oNet.MapNetworkDrive "M:", "\\<server-name>\Share1", False
oNet.MapNetworkDrive "N:", "\\<server-name>\Share2", False
etc etc

printers.vbs
Code: [Select]
' VBScript source code
On Error Resume Next

Dim WshNetwork

Set WshNetwork = CreateObject("WScript.Network")

WshNetwork.AddWindowsPrinterConnection "\\<server-name>\<printer-1-name>"
WshNetwork.AddWindowsPrinterConnection "\\<server-name>\<printer-2-name>"

102
Try setting the default gateway to the IP of the modem ? i.e. set them both to 122.54.142.218
How is the modem attached to the Zentyal box?

Also, when you have a modem successfully connected via DHCP please run 'ifconfig' from a terminal on your Zentyal box and post the results.

Network > DNS should just be set to the google DNS servers you have listed in the network configs. If you're running a DNS server on your Zentyal box you might want to put your internal IP at the top of the list.. At least, that's how mine is set :)

103
Installation and Upgrades / Re: Webmail Error
« on: March 01, 2012, 09:01:58 pm »
*BUMP*

Still trying to fix this. As per this trac, I got the spamassassin.sql file from here but got errors that the spamassassin database and amavis user already existed. I removed the amavis user and spamassassin postgresql database;
Code: [Select]
$ sudo su - postgres
 postgres@~$ psql
 
 psql (8.4.9)
 Type "help" for help.
 
 postgres=# DROP ROLE amavis;
 DROP
 postgres=# DROP DATABASE spamassassin;
 DROP
 postgres=# \q
Then retried
Code: [Select]
sudo /usr/share/zentyal-mailfilter/mailfilter-sql update
 sudo /etc/init.d/zentyal mailfilter restart
but I'm still getting amavis authentication errors in the postgres log.
Code: [Select]
2012-03-01 19:06:44 GMT LOG:  provided username (amavis) and authenticated username (root) don't match
2012-03-01 19:06:44 GMT FATAL:  Ident authentication failed for user "amavis"
2012-03-01 19:06:44 GMT LOG:  provided username (amavis) and authenticated username (root) don't match
2012-03-01 19:06:44 GMT FATAL:  Ident authentication failed for user "amavis"
2012-03-01 19:06:45 GMT LOG:  unexpected EOF on client connection
2012-03-01 19:06:45 GMT ERROR:  relation "bayes_global_vars" does not exist at character 19
2012-03-01 19:06:45 GMT STATEMENT:  SELECT value FROM bayes_global_vars WHERE variable = 'VERSION'
2012-03-01 19:06:45 GMT ERROR:  relation "bayes_global_vars" does not exist at character 19
2012-03-01 19:06:45 GMT STATEMENT:  SELECT value FROM bayes_global_vars WHERE variable = 'VERSION'
2012-03-01 19:08:08 GMT ERROR:  relation "bayes_global_vars" does not exist at character 19
2012-03-01 19:08:08 GMT STATEMENT:  SELECT value FROM bayes_global_vars WHERE variable = 'VERSION'
2012-03-01 19:17:02 GMT ERROR:  relation "mailfilter_smtp_traffic_hourly" does not exist at character 8
2012-03-01 19:17:02 GMT STATEMENT:  UPDATE mailfilter_smtp_traffic_hourly SET clean = clean + 1 WHERE (date = '2012-03-01 19:00:00')
2012-03-01 19:17:05 GMT LOG:  unexpected EOF on client connection

The amavis user does not appear in the UI, I can't find the amavis user in the LDAP database eiter.. the plan being to remove it & re-install the zentyal mailfilter module. How can I safely remove / fix the amavis user ? Removing the module leaves the user in /etc/passwd..

(NB the root of this problem was re-installing the users and groups modules, the amavis user authentication has not worked since.)

104
Installation and Upgrades / Re: Webmail Error
« on: January 08, 2012, 06:30:58 pm »
I have found something I'd like to try... http://trac.zentyal.org/ticket/3436

but I can't get hold of the file from the Trac
Quote
Error: Forbidden

BROWSER_VIEW privileges are required to perform this operation

TracGuide — The Trac User and Administration Guide

I've tried running the update without copying the schema, most of the errors are gone from the log when receiving mail but I'm still getting
Quote
FATAL:  Ident authentication failed for user "amavis"
.

** Edit **

Scratch that, I'm getting a bunch of entries like before;

Quote
2012-01-09 18:17:09 GMT STATEMENT:  SELECT share, count(*) as virus FROM samba_quarantine WHERE event='quarantine' AND (samba_quarantine.timestamp >= '2011-9-1 00:00:00' AND samba_quarantine.timestamp < date '2011-9-01 00:00:00' + interval '1 month') GROUP BY filename ;
2012-01-09 18:17:09 GMT ERROR:  column "share" does not exist at character 8
2012-01-09 18:17:09 GMT STATEMENT:  SELECT share, count(*) as virus FROM samba_quarantine WHERE event='quarantine' AND (samba_quarantine.timestamp >= '2011-10-1 00:00:00' AND samba_quarantine.timestamp < date '2011-10-01 00:00:00' + interval '1 month') GROUP BY filename ;
2012-01-09 18:17:09 GMT ERROR:  column "share" does not exist at character 8
2012-01-09 18:17:09 GMT STATEMENT:  SELECT share, count(*) as virus FROM samba_quarantine WHERE event='quarantine' AND (samba_quarantine.timestamp >= '2011-11-1 00:00:00' AND samba_quarantine.timestamp < date '2011-11-01 00:00:00' + interval '1 month') GROUP BY filename ;
2012-01-09 18:17:09 GMT ERROR:  column "share" does not exist at character 8
2012-01-09 18:17:09 GMT STATEMENT:  SELECT share, count(*) as virus FROM samba_quarantine WHERE event='quarantine' AND (samba_quarantine.timestamp >= '2011-12-1 00:00:00' AND samba_quarantine.timestamp < date '2011-12-01 00:00:00' + interval '1 month') GROUP BY filename ;
2012-01-09 18:17:09 GMT ERROR:  column "share" does not exist at character 8
2012-01-09 18:17:09 GMT STATEMENT:  SELECT share, count(*) as virus FROM samba_quarantine WHERE event='quarantine' AND (samba_quarantine.timestamp >= '2012-1-1 00:00:00' AND samba_quarantine.timestamp < date '2012-1-01 00:00:00' + interval '1 month') GROUP BY filename ;
2012-01-09 18:17:15 GMT LOG:  unexpected EOF on client connection
2012-01-09 18:18:03 GMT FATAL:  Ident authentication failed for user "amavis"
2012-01-09 18:18:03 GMT FATAL:  Ident authentication failed for user "amavis"
2012-01-09 18:25:26 GMT FATAL:  Ident authentication failed for user "amavis"
2012-01-09 18:29:44 GMT FATAL:  Ident authentication failed for user "amavis"
2012-01-09 18:29:44 GMT FATAL:  Ident authentication failed for user "amavis"
2012-01-09 18:29:55 GMT ERROR:  null value in column "clientconn" violates not-null constraint
2012-01-09 18:29:55 GMT STATEMENT:  INSERT INTO mailfilter_pop (spam,timestamp,mails,address,virus,clean,event,clientConn) VALUES ($1,$2,$3,$4,$5,$6,$7,$8)
2012-01-09 18:33:37 GMT ERROR:  null value in column "clientconn" violates not-null constraint
2012-01-09 18:33:37 GMT STATEMENT:  INSERT INTO mailfilter_pop (spam,timestamp,mails,address,virus,clean,event,clientConn) VALUES ($1,$2,$3,$4,$5,$6,$7,$8)
2012-01-09 18:38:04 GMT FATAL:  Ident authentication failed for user "amavis"

105
Installation and Upgrades / Re: Webmail Error
« on: January 07, 2012, 01:40:00 pm »
In the postgres log, I'm also getting lots of this;

Quote
2012-01-07 12:17:24 GMT ERROR:  column "share" does not exist at character 8
2012-01-07 12:17:24 GMT STATEMENT:  SELECT share, count(*) as virus FROM samba_quarantine WHERE event='quarantine' AND (samba_quarantine.timestamp >= '2011-11-1 00:00:00' AND samba_quarantine.timestamp < date '2011-11-01 00:00:00' + interval '1 month') GROUP BY filename ;
2012-01-07 12:17:24 GMT ERROR:  column "share" does not exist at character 8
2012-01-07 12:17:24 GMT STATEMENT:  SELECT share, count(*) as virus FROM samba_quarantine WHERE event='quarantine' AND (samba_quarantine.timestamp >= '2011-12-1 00:00:00' AND samba_quarantine.timestamp < date '2011-12-01 00:00:00' + interval '1 month') GROUP BY filename ;
2012-01-07 12:17:24 GMT ERROR:  column "share" does not exist at character 8
2012-01-07 12:17:24 GMT STATEMENT:  SELECT share, count(*) as virus FROM samba_quarantine WHERE event='quarantine' AND (samba_quarantine.timestamp >= '2012-1-1 00:00:00' AND samba_quarantine.timestamp < date '2012-1-01 00:00:00' + interval '1 month') GROUP BY filename ;
2012-01-07 12:17:30 GMT LOG:  unexpected EOF on client connection
2012-01-07 12:18:02 GMT FATAL:  Ident authentication failed for user "amavis"
2012-01-07 12:18:02 GMT FATAL:  Ident authentication failed for user "amavis"

Is it possible to re-initalise & rebuild all zentyal postrgres databases without borking the server ?


Pages: 1 ... 5 6 [7] 8 9