This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
1
Portuguese / Re: Problemas com IP Estático
« on: April 19, 2013, 11:49:24 pm »
Sim, sim, eu sei. Mas quando dou um brctl show não mostra nada. O comando de deleção dá erro de inexistência.
Por isso que falei que era um bug. =)
Amplexos,
- Marcelo.
Edit: Acabei de verificar e o problema não acontece com a versão 2.x do Zentyal.
Por isso que falei que era um bug. =)
Amplexos,
- Marcelo.
Edit: Acabei de verificar e o problema não acontece com a versão 2.x do Zentyal.
2
Portuguese / Re: Problemas com IP Estático
« on: April 19, 2013, 09:58:35 pm »
É eu sei, como disse antes o DHCP é o roteador. Ele é extremamente limitado em suas opções. Pior que não posso trocar e colocar outro.
Vou me concentrar em olhar logs e arquivos de configuração do Zentyal e descobrir porque ele perde conexão quando com ip fixo. Eu aviso se descobrir algo.
Amplexos,
- Marcelo
(ps - descobri um pequeno bug: quando configura um bridge e depois o remove ele fica aparecendo sem existir na aba do Zentyal)
Vou me concentrar em olhar logs e arquivos de configuração do Zentyal e descobrir porque ele perde conexão quando com ip fixo. Eu aviso se descobrir algo.
Amplexos,
- Marcelo
(ps - descobri um pequeno bug: quando configura um bridge e depois o remove ele fica aparecendo sem existir na aba do Zentyal)
3
Portuguese / Re: Problemas com IP Estático
« on: April 19, 2013, 09:42:32 pm »
Concordo. Mas quem disse que o equipamento de ótima qualidade que a net fornece faz isso?
Inclusive o comportamento dele em relação ao lease é meio anormal. Qualquer roteador vagabundo permite escolher tempo de lease, esse não.
Enfim, ainda quero entender o motivo de perder conexão com a internet no Zentyal quando usando IP fixo.
Amplexos,
- Marcelo
Inclusive o comportamento dele em relação ao lease é meio anormal. Qualquer roteador vagabundo permite escolher tempo de lease, esse não.
Enfim, ainda quero entender o motivo de perder conexão com a internet no Zentyal quando usando IP fixo.
Amplexos,
- Marcelo
4
Portuguese / Re: Problemas com IP Estático
« on: April 19, 2013, 09:14:59 pm »
Lendo de novo a mensagem percebo que não me expressei direto.
O Zentyal está configurado com uma única placa de rede.
Tenho um roteador que fornece o DHCP (Net Cabo - range: 192.168.0.x)
Se deixo o Zentyal para pegar IP dinamicamente ele acessa a internet normalmente. As estações acessam ele normalmente. Ele acessa as estações também. Inclusive tenho um proxy configurado nele e funciona perfeitamente. Este uso para evitar o download das atualizações de antivírus e Windows mais de uma vez. Uma máquina baixou as atualizações, pronto, já está no cache e faz uma bela diferença depois. Deixando a interface desmarcada (rede interna) tudo funciona. Se coloco como rede externa, obviamente as estações perdem acesso ao Zentyal mas continuo com internet nele.
O problema só ocorre quando configuro o Zentyal dando um IP fixo para ele. Tenho conectividade normal das estações para ele e vice-versa mas fico sem internet no Zentyal.
Conferi as regras de firewall e está tudo certo. Gateway, quando estou usando ip dinâmico é atribuído automaticamente. Usei a mesma configuração quando coloquei IP fixo e fico sem conectividade somente com a internet.
No momento deixei dinâmico e estou conseguindo usar sem problemas. Só não tenho como usar o hosts do Windows para direcionar os acessos ao servidor usando nome já que, toda vez que reinicio o Zentyal pela manhã ele muda de IP. Mas isso é culpa do roteador da Net. Nada a fazer.
Obrigado!
- Marcelo
O Zentyal está configurado com uma única placa de rede.
Tenho um roteador que fornece o DHCP (Net Cabo - range: 192.168.0.x)
Se deixo o Zentyal para pegar IP dinamicamente ele acessa a internet normalmente. As estações acessam ele normalmente. Ele acessa as estações também. Inclusive tenho um proxy configurado nele e funciona perfeitamente. Este uso para evitar o download das atualizações de antivírus e Windows mais de uma vez. Uma máquina baixou as atualizações, pronto, já está no cache e faz uma bela diferença depois. Deixando a interface desmarcada (rede interna) tudo funciona. Se coloco como rede externa, obviamente as estações perdem acesso ao Zentyal mas continuo com internet nele.
O problema só ocorre quando configuro o Zentyal dando um IP fixo para ele. Tenho conectividade normal das estações para ele e vice-versa mas fico sem internet no Zentyal.
Conferi as regras de firewall e está tudo certo. Gateway, quando estou usando ip dinâmico é atribuído automaticamente. Usei a mesma configuração quando coloquei IP fixo e fico sem conectividade somente com a internet.
No momento deixei dinâmico e estou conseguindo usar sem problemas. Só não tenho como usar o hosts do Windows para direcionar os acessos ao servidor usando nome já que, toda vez que reinicio o Zentyal pela manhã ele muda de IP. Mas isso é culpa do roteador da Net. Nada a fazer.
Obrigado!
- Marcelo
5
Portuguese / Problemas com IP Estático
« on: April 19, 2013, 06:43:36 pm »
Olá,
Quando configuro servidor, que tem apenas uma NIC, como DHCP, seja configurando a interface como local ou externa, tenho acesso a internet sem problemas. Se configuro como fixa, fico sem acesso. Se, configurada com IP fixo e definida como local, posso acessar, do servidor, qualquer máquina na rede, e qualquer máquina na rede acessa o servidor. Mas nada de internet. Se configuro como DHCP funciona normalmente.
O problema é que, como não uso o servidor como DHCP nem DNS server, preciso que ele tenha um IP Fixo. Alguém já passou por algo semelhante?
No meu servidor 2.2 isso não acontece.
Amplexos,
- Marcelo
Quando configuro servidor, que tem apenas uma NIC, como DHCP, seja configurando a interface como local ou externa, tenho acesso a internet sem problemas. Se configuro como fixa, fico sem acesso. Se, configurada com IP fixo e definida como local, posso acessar, do servidor, qualquer máquina na rede, e qualquer máquina na rede acessa o servidor. Mas nada de internet. Se configuro como DHCP funciona normalmente.
O problema é que, como não uso o servidor como DHCP nem DNS server, preciso que ele tenha um IP Fixo. Alguém já passou por algo semelhante?
No meu servidor 2.2 isso não acontece.
Amplexos,
- Marcelo
6
Portuguese / Re: Acesso direto ao compartilhamento mas não ao servidor
« on: April 12, 2013, 10:07:48 am »
Sim é esse mesmo o problema. Uma solução seria usar uma tabela de filtragem para que fossem removidos acentos automaticamente dos arquivos de configuração que não os suportam.
Mudei para inglês na interface administrativa e o problema se resolveu.
Obrigado!
Mudei para inglês na interface administrativa e o problema se resolveu.
Obrigado!
7
Portuguese / [Resolvido] Acesso direto ao compartilhamento mas não ao servidor
« on: April 12, 2013, 03:04:49 am »
Está acontecendo um problema com a versão 3.0 que não ocorria anteriormente:
Se tento acessar o servidor direto pelo nome ou IP diz que não tenho permissão. Mas se coloco o nome do compartilhamento acesso normalmente.
\\servidor => acesso negado
\\servidor\compartilhamento => Acessor normal
Isso está acontecendo com clientes Windows 7 professional e home fora do domínio. Não fiz o teste com usuário de domínio, em rede doméstica não vejo necessidade. No Windows XP o problema não ocorre e nem no Ubuntu.
Estou procurando na rede, mas se alguém tiver uma luz, agradeço muito!
Amplexos,
- Marcelo
Se tento acessar o servidor direto pelo nome ou IP diz que não tenho permissão. Mas se coloco o nome do compartilhamento acesso normalmente.
\\servidor => acesso negado
\\servidor\compartilhamento => Acessor normal
Isso está acontecendo com clientes Windows 7 professional e home fora do domínio. Não fiz o teste com usuário de domínio, em rede doméstica não vejo necessidade. No Windows XP o problema não ocorre e nem no Ubuntu.
Estou procurando na rede, mas se alguém tiver uma luz, agradeço muito!
Amplexos,
- Marcelo
8
Installation and Upgrades / Re: eBox 1.5: no access to user corner
« on: August 12, 2010, 03:21:25 pm »
I am not quite sure if the problem is related but lets see.
I am running a standalone server here for test purposes and I got no access to the user corner as well (http://gdmserv01:8888 brings a Internal Server Error message). First I saw write permissions errors in /var/lib/ebox/tmp and did a chmod 777 there. The error changed.
So a did a chmod -R 777 there:
Now I got that problem with no tty present and no askpass program specified...
Lets do a little more digging.
Embraces Widely Amplified
D'
I am running a standalone server here for test purposes and I got no access to the user corner as well (http://gdmserv01:8888 brings a Internal Server Error message). First I saw write permissions errors in /var/lib/ebox/tmp and did a chmod 777 there. The error changed.
Code: [Select]
Use of uninitialized value $reason in length at (eval 117) line 49.
sh: cannot create /var/lib/ebox/tmp/stderr: Permission denied
So a did a chmod -R 777 there:
Code: [Select]
[Thu Aug 12 10:07:32 2010] [error] [client 192.168.1.101] root command status 'ebox.redis' failed. \nError output: \nCommand output: . \nExit value: 2, referer: https://gdmlserv01:8888/
Use of uninitialized value $reason in length at (eval 135) line 49.
[Thu Aug 12 10:09:11 2010] [error] [client 192.168.1.101] /usr/bin/sudo -p sudo: /var/lib/ebox/tmp/G4vWVthK3X.cmd 2> /var/lib/ebox/tmp/stderr raised the following sudo error: sudo: no tty present and no askpass program specified\n, referer: https://gdmlserv01:8888/
[Thu Aug 12 10:10:07 2010] [error] [client 192.168.1.101] /usr/bin/sudo -p sudo: /var/lib/ebox/tmp/CmRNSM73Z1.cmd 2> /var/lib/ebox/tmp/stderr raised the following sudo error: sudo: no tty present and no askpass program specified\n, referer: https://gdmlserv01:8888/
Now I got that problem with no tty present and no askpass program specified...
Lets do a little more digging.
Embraces Widely Amplified
D'
9
Portuguese / Problema com nome de certificado
« on: August 12, 2010, 02:46:11 pm »Code: [Select]
[Thu Aug 12 00:10:17 2010] [warn] Init: Session Cache is not configured [hint: SSLSessionCache]
[Thu Aug 12 00:10:17 2010] [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
[Thu Aug 12 00:10:17 2010] [warn] RSA server certificate CommonName (CN) `eBox Server' does NOT match server name!?
[Thu Aug 12 00:10:18 2010] [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
[Thu Aug 12 00:10:18 2010] [warn] RSA server certificate CommonName (CN) `eBox Server' does NOT match server name!?
Um erro que tem me incomodado um pouco é essa mensagem acima. Ela se repete muito no log e erros do ebox.
Estou fazendo uma busca no fórum mas não achei ainda nada sobre como resolver esse erro.
Acho que isso pode estar relacionado com o problema de o UserCorner não funcionar (aqui ele dá uma mensagem de Internal Server Error).
Alguma idéia?
Amplexos Amplamente Amplificados
D'
10
Installation and Upgrades / Re: Roaming Profile - Won't synchronize
« on: January 03, 2010, 01:02:58 am »
Hi, thanks for the fast response!
There are tree machines here that I am using for tests.
One with Windows XP Professional with no service pack, another with XP Pro SP 2 and finally onewith XP Pro SP3 with all updates. The problems occurs with all the tree of them.
Here is the output you asked for:
I used the official installer. Did a apt-get update and upgrade.
Thanks again!
Update -1:
Something I saw is that if I try to join the domain with a machine without service pack 3 (XP) it happens really fast. But with SP3 it took about 7 minutes!
Update -2:
I did an uptade and now there is an error while saving the profile (read write permissions).
Will try to figure out what is wrong now.
Update -3:
I just disabled the PDC, removed all users and groups and shares. Restarted the service and them made all configurations again. Now things work parcialy. I am able to log on the domain and the profile is get from the server. But when I do a logoff I receve a message like this:
"Windows cannot update your roaming profile.
Possible causes of this error include network problems or insufficient security rights.
If this problem persists, contact your network administrator."
I know there is enought space left (500 gb hard disk with only 3% in use).
Let's continue the search!
There are tree machines here that I am using for tests.
One with Windows XP Professional with no service pack, another with XP Pro SP 2 and finally onewith XP Pro SP3 with all updates. The problems occurs with all the tree of them.
Here is the output you asked for:
Code: [Select]
ebox:
Instalado: 1.2.9.2-0ubuntu1~ppa1~hardy1
Candidato: 1.2.9.2-0ubuntu1~ppa1~hardy1
Tabela de versão:
*** 1.2.9.2-0ubuntu1~ppa1~hardy1 0
500 http://ppa.launchpad.net hardy/main Packages
100 /var/lib/dpkg/status
0.11.99-0ubuntu11 0
500 http://br.archive.ubuntu.com hardy/universe Packages
Code: [Select]
samba:
Instalado: 3.0.28a-1ubuntu4.9
Candidato: 3.0.28a-1ubuntu4.9
Tabela de versão:
*** 3.0.28a-1ubuntu4.9 0
500 http://br.archive.ubuntu.com hardy-updates/main Packages
500 http://security.ubuntu.com hardy-security/main Packages
100 /var/lib/dpkg/status
3.0.28a-1ubuntu4 0
500 http://br.archive.ubuntu.com hardy/main Packages
I used the official installer. Did a apt-get update and upgrade.
Thanks again!
Update -1:
Something I saw is that if I try to join the domain with a machine without service pack 3 (XP) it happens really fast. But with SP3 it took about 7 minutes!
Update -2:
I did an uptade and now there is an error while saving the profile (read write permissions).
Code: [Select]
samba:
Instalado: 2:3.4.3-1ubuntu1~ppa1~hardy3
Candidato: 2:3.4.3-1ubuntu1~ppa1~hardy3
Tabela de versão:
*** 2:3.4.3-1ubuntu1~ppa1~hardy3 0
100 /var/lib/dpkg/status
3.0.28a-1ubuntu4.9 0
500 http://br.archive.ubuntu.com hardy-updates/main Packages
500 http://security.ubuntu.com hardy-security/main Packages
3.0.28a-1ubuntu4 0
500 http://br.archive.ubuntu.com hardy/main Packages
Will try to figure out what is wrong now.
Update -3:
I just disabled the PDC, removed all users and groups and shares. Restarted the service and them made all configurations again. Now things work parcialy. I am able to log on the domain and the profile is get from the server. But when I do a logoff I receve a message like this:
"Windows cannot update your roaming profile.
Possible causes of this error include network problems or insufficient security rights.
If this problem persists, contact your network administrator."
I know there is enought space left (500 gb hard disk with only 3% in use).
Let's continue the search!
11
Installation and Upgrades / Roaming Profile - Won't synchronize
« on: January 02, 2010, 09:45:32 pm »
Hello all.
I just started with eBox and find it amazing and surprisely easy and clear to understand.
I was able to make a nice installation and everything work right out of the box. Except for two problems: One with roaming profiles and one with proxy. The last one is not important for now.
If I go to a computer in the domain and log with a user and create a file, when I do the logoff and login again in another machine the file is there. Perfect.
But if i made any changes to the file and do a logoff and go back to the first machine the file is not synchronized. The changes I made are not there.
Is there any obvious thing I am missing?
Thanks!
Marcelo D'Moriam
---
I apologize by my english!
I just started with eBox and find it amazing and surprisely easy and clear to understand.
I was able to make a nice installation and everything work right out of the box. Except for two problems: One with roaming profiles and one with proxy. The last one is not important for now.
If I go to a computer in the domain and log with a user and create a file, when I do the logoff and login again in another machine the file is there. Perfect.
But if i made any changes to the file and do a logoff and go back to the first machine the file is not synchronized. The changes I made are not there.
Is there any obvious thing I am missing?
Thanks!
Marcelo D'Moriam
---
I apologize by my english!
Pages: [1]