This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
1
Installation and Upgrades / [SOLVED]Configuring DHCP
« on: September 26, 2014, 10:32:10 am »
Good Day!
Hello guys im new to zentyal and i need to configure a DHCP. i just want to ask, what are the module that i need to configure to make my DHCP work.
Thanks in advance.
Hello guys im new to zentyal and i need to configure a DHCP. i just want to ask, what are the module that i need to configure to make my DHCP work.
Thanks in advance.
2
Installation and Upgrades / [SOLVED]Confuse about zentyal 64 bit and 32 bit
« on: September 24, 2014, 06:38:05 am »
Good day!
hello im just wondering about the zentyal if im using 64 bit or 32 bit,
i install zentyal 3.5 with an existing ubuntu server 14.04 64bit and i install zentyal using command line in linux ubuntu server and i use this step.
1st - i type this line on my /etc/apt/sources.list
deb http://archive.zentyal.org/zentyal 3.5 main
2nd - i type this line to get a key
wget -q http://keys.zentyal.org/zentyal-3.5-archive.asc -O- | sudo apt-key add -
3rd - sudo apt-get update
4th- sudo apt-get install zentyal
thats the way how i install zentyal 3.5 on my existing ubuntu server 14.04 64bit
im just wondering if i install zentyal 3.5 64bit or 32bit is there any posible way how may i know if im using zentyal 3.5 64bit or 32bit
Thanks in Advance!
hello im just wondering about the zentyal if im using 64 bit or 32 bit,
i install zentyal 3.5 with an existing ubuntu server 14.04 64bit and i install zentyal using command line in linux ubuntu server and i use this step.
1st - i type this line on my /etc/apt/sources.list
deb http://archive.zentyal.org/zentyal 3.5 main
2nd - i type this line to get a key
wget -q http://keys.zentyal.org/zentyal-3.5-archive.asc -O- | sudo apt-key add -
3rd - sudo apt-get update
4th- sudo apt-get install zentyal
thats the way how i install zentyal 3.5 on my existing ubuntu server 14.04 64bit
im just wondering if i install zentyal 3.5 64bit or 32bit is there any posible way how may i know if im using zentyal 3.5 64bit or 32bit
Thanks in Advance!
3
Installation and Upgrades / zentyal 3.5 samba fail when trying to start the antivirus module
« on: August 28, 2014, 05:19:18 am »
Good Day!
im using zentyal 3.5 and i set it up as additional domain controller and try to use it as a file server, but every time i try to run the antivirus and try to restart the zentyal using this command /etc/init.d/$ sudo ./zentyal restart
the samba module always fail but it doesnt give any error message.
need help about this problem
Thank you and godbless,
im using zentyal 3.5 and i set it up as additional domain controller and try to use it as a file server, but every time i try to run the antivirus and try to restart the zentyal using this command /etc/init.d/$ sudo ./zentyal restart
the samba module always fail but it doesnt give any error message.
need help about this problem
Thank you and godbless,
4
Installation and Upgrades / [SOLVED]Zentyal 3.5 as file server
« on: August 20, 2014, 05:51:52 pm »
Good Day,
hello guys, im new to linux and zentyal, i want to use zentyal as a file server and i need to connect it to my main domain server can someone tell me what module and how to configure those module that im going to need. i really need your help hoping for your kind consideration
thank you in advance and godbless!
hello guys, im new to linux and zentyal, i want to use zentyal as a file server and i need to connect it to my main domain server can someone tell me what module and how to configure those module that im going to need. i really need your help hoping for your kind consideration
thank you in advance and godbless!
5
Installation and Upgrades / Configure Zentyal 3.5 as a additional domain controller
« on: August 02, 2014, 06:02:27 am »
Good Day!
Hello Guys, Can someone teach me on how to configure zentyal 3.5 as a additional domain controller?
i have windows 2008 as a primary domain controller i dont know how to configure yet because i am just a beginner of using zentyal and linux hoping for your consideration.
Thank you and God Bless!
Best Regards,
Hello Guys, Can someone teach me on how to configure zentyal 3.5 as a additional domain controller?
i have windows 2008 as a primary domain controller i dont know how to configure yet because i am just a beginner of using zentyal and linux hoping for your consideration.
Thank you and God Bless!
Best Regards,
6
Installation and Upgrades / zental 3.3.10 web admin fail after upgrade
« on: July 28, 2014, 04:04:09 am »
Good Day,
Hello guys i installed zentyal 3.3 on my ubuntu server 13.10 for the first time i open the webadmin it works really fine but, after i installed all the security updates and try to run the this command " sudo apt-get upgrade" i can't acces the webadmin anymore. i try to restart the zentyal using this command with the directory of /etc/init.d/
"sudo ./zentyal restart"
everything works fine except zentyal module: webadmin
root command APACHE_CONFDIR=/var/lib/zentyal/conf/ apache2ct1 stop failed.
Error output: apache2: Syntax error on line 39 of /var/lib/zentyal/conf/apache2.conf: Could not open configuration file /etc/apache2/mods-available/authz_default.load: No such file or directory
I need your help please..
Thank You and God bless!
Hello guys i installed zentyal 3.3 on my ubuntu server 13.10 for the first time i open the webadmin it works really fine but, after i installed all the security updates and try to run the this command " sudo apt-get upgrade" i can't acces the webadmin anymore. i try to restart the zentyal using this command with the directory of /etc/init.d/
"sudo ./zentyal restart"
everything works fine except zentyal module: webadmin
root command APACHE_CONFDIR=/var/lib/zentyal/conf/ apache2ct1 stop failed.
Error output: apache2: Syntax error on line 39 of /var/lib/zentyal/conf/apache2.conf: Could not open configuration file /etc/apache2/mods-available/authz_default.load: No such file or directory
I need your help please..
Thank You and God bless!
7
Installation and Upgrades / webadmin on zentyal 3.3 can't access after upgrade
« on: July 26, 2014, 06:17:11 am »
Good Day,
Hello Guys, i installed zentyal 3.3 on my ubuntu 13.10 server but i can't access the web admin after i run "sudo apt-get upgrade" i saw some tiutorials and i run this command.
"sudo nginx -c /var/lib/zentyal/conf/nginx.conf"
and the output is this.
"nginx: [emerg] bind() to 0.0.0.0:443 failed (98: Address already in use)"
and when i try to restart the zentyal using command line with the directory /etc/init.d
i type this command "sudo ./zentyal restart" and its failed to restart and the error is this
"ERROR OUTPUT apache2:syntax error on line 39 of /var/lib/zentyal/conf/apache2.conf: Could not open configuration file /etc/apatche2/mods-available/authz-default.load: No such file or directory"
please let me know if you need any information about my problem.
i'am just a beginner
Thank You and Godbless
Hello Guys, i installed zentyal 3.3 on my ubuntu 13.10 server but i can't access the web admin after i run "sudo apt-get upgrade" i saw some tiutorials and i run this command.
"sudo nginx -c /var/lib/zentyal/conf/nginx.conf"
and the output is this.
"nginx: [emerg] bind() to 0.0.0.0:443 failed (98: Address already in use)"
and when i try to restart the zentyal using command line with the directory /etc/init.d
i type this command "sudo ./zentyal restart" and its failed to restart and the error is this
"ERROR OUTPUT apache2:syntax error on line 39 of /var/lib/zentyal/conf/apache2.conf: Could not open configuration file /etc/apatche2/mods-available/authz-default.load: No such file or directory"
please let me know if you need any information about my problem.
i'am just a beginner
Thank You and Godbless
8
Installation and Upgrades / install zentyal with an existing ubuntu server 12.04
« on: July 23, 2014, 03:47:46 am »
Good Day!,
i installed a ubuntu server 12.04 and i wand to install a zentyal in it, but honestly i dont know what to do and what should i do. please help
by the way i'am just a beginner.
Thank You.
i installed a ubuntu server 12.04 and i wand to install a zentyal in it, but honestly i dont know what to do and what should i do. please help
by the way i'am just a beginner.
Thank You.
Pages: [1]