Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
1
Installation and Upgrades / Re: Looking for VPN help please
« on: March 04, 2010, 09:45:20 pm »
Well I solved part of the problem by enabling NAT. Now I can connect to the VPN and actually connect to network shares on other machines. I still have an issue with browsing but I'm working on that. I think this is a good start.
2
Installation and Upgrades / Re: Looking for VPN help please
« on: February 23, 2010, 11:09:58 pm »
Thank you for your reply, No I had not done that. I did that just now and it still does not work.
Gary
Gary
3
Installation and Upgrades / Looking for VPN help please
« on: February 18, 2010, 10:31:33 pm »
Looking for VPN help please.
I have a server running Ubuntu 8.04 LTS along with eBox 1.2.3
functioning as a PDC and I’m having trouble getting a VPN to work
properly. I have created a Certification Authority for the company, I
then created a certificates for the server as well as a couple of
clients, added the "advertised network" I then downloaded client bundles
for my XP and Linux clients.
Now I am able to connect to the VPN server and receive authentication
and an IP address in the range I have set for my internal “virtual”
network (10.254.0.2) on a WinXP client. The trouble I’m having is
getting to anything on the “advertised network” via the “map network
drive” process in windows. Also I can’t browse anything on any network
at all. I can only access shares created on the eBox VPN server but need
to know the share names to do so.
Any help would be greatly appreciated.
Thank you.
_eBox VPN Configuration_
Eth0 10.0.0.47
Eth1 65.87.xx.xx
Local address (same) 65.87.xx.xx
VPN subnet 10.254.0.0/24
VPN Interface address 10.254.0.1 /24 (VPN client got 10.254.0.2)
Port 1194/UDP
VPN Network Interface tap0
VPN “advertised” network 10.0.0.0/24
Ping results...With the VPN established between (eBox) and XP laptop client…
VPNServer:10.254.0.1 XPclient:10.254.0.2 nexus:10.0.0.46 (network server)
on advertised network 10.0.0.0 /24
Ping XP client to server: (10.254.0.2 to 10.254.0.1) OK
Ping from server to client: (10.254.0.1 to 10.254.0.2) No Good
Server pinging itself on 10.254.0.1 OK
XP client ping to 10.0.0.46 (nexus) No Good
10.0.0.46 (nexus) ping to 10.254.0.2 (XPclient) No Good
10.0.0.46 (nexus) ping to 10.254.0.1 (eBox) No Good
I have a server running Ubuntu 8.04 LTS along with eBox 1.2.3
functioning as a PDC and I’m having trouble getting a VPN to work
properly. I have created a Certification Authority for the company, I
then created a certificates for the server as well as a couple of
clients, added the "advertised network" I then downloaded client bundles
for my XP and Linux clients.
Now I am able to connect to the VPN server and receive authentication
and an IP address in the range I have set for my internal “virtual”
network (10.254.0.2) on a WinXP client. The trouble I’m having is
getting to anything on the “advertised network” via the “map network
drive” process in windows. Also I can’t browse anything on any network
at all. I can only access shares created on the eBox VPN server but need
to know the share names to do so.
Any help would be greatly appreciated.
Thank you.
_eBox VPN Configuration_
Eth0 10.0.0.47
Eth1 65.87.xx.xx
Local address (same) 65.87.xx.xx
VPN subnet 10.254.0.0/24
VPN Interface address 10.254.0.1 /24 (VPN client got 10.254.0.2)
Port 1194/UDP
VPN Network Interface tap0
VPN “advertised” network 10.0.0.0/24
Ping results...With the VPN established between (eBox) and XP laptop client…
VPNServer:10.254.0.1 XPclient:10.254.0.2 nexus:10.0.0.46 (network server)
on advertised network 10.0.0.0 /24
Ping XP client to server: (10.254.0.2 to 10.254.0.1) OK
Ping from server to client: (10.254.0.1 to 10.254.0.2) No Good
Server pinging itself on 10.254.0.1 OK
XP client ping to 10.0.0.46 (nexus) No Good
10.0.0.46 (nexus) ping to 10.254.0.2 (XPclient) No Good
10.0.0.46 (nexus) ping to 10.254.0.1 (eBox) No Good
4
Installation and Upgrades / Looking for some help with my eBox PDC please
« on: February 12, 2010, 12:54:34 am »
I have a server running Ubuntu 8.04 LTS along with eBox 1.2.3 functioning as a PDC. I can not seem to get Windows XP clients to join the domain. When I try to add the XP client to the domain via the “computer>management>properties>computer name>change” procedure the request fails with the message.
“The following error occurred attempting to join the domain “xxx”: the user name could not be found.”
I have tried this with my administrator username and password. Also using a second admin account created just for this problem resulted in the same result.
The following log file entries show what is going on when this is happening. If there are others that might lead to the solution please let me know. I would appreciate any suggestions at this time it’s getting a little frustrating.
garyo@orion:/var/log/samba$ tail -10 smbd
[2010/02/11 12:30:12, 0] lib/util_sock.c:get_peer_addr(1224)
getpeername failed. Error was Transport endpoint is not connected
[2010/02/11 12:39:43, 0] lib/util_sock.c:get_peer_addr(1224)
getpeername failed. Error was Transport endpoint is not connected
[2010/02/11 12:39:43, 0] lib/util_sock.c:get_peer_addr(1224)
getpeername failed. Error was Transport endpoint is not connected
[2010/02/11 12:39:44, 0] lib/util_sock.c:get_peer_addr(1224)
getpeername failed. Error was Transport endpoint is not connected
[2010/02/11 12:39:44, 0] lib/util_sock.c:get_peer_addr(1224)
getpeername failed. Error was Transport endpoint is not connected
garyo@orion:/var/log/samba$
garyo@orion:/var/log/samba$ tail -27 log.winbindd-idmap
[2010/02/11 12:39:43, 0] nsswitch/idmap.c:idmap_alloc_init(750)
ERROR: Initialization failed for alloc backend, deferred!
[2010/02/11 12:39:44, 1] passdb/pdb_ldap.c:ldapsam_getgroup(2251)
ldapsam_getgroup: Duplicate entries for filter (&(objectClass=sambaGroupMapping)(gidNumber=544)): count=2
[2010/02/11 12:39:44, 1] nsswitch/idmap_tdb.c:idmap_tdb_alloc_init(397)
idmap uid range missing or invalid
idmap will be unable to map foreign SIDs
[2010/02/11 12:39:44, 0] nsswitch/idmap.c:idmap_alloc_init(750)
ERROR: Initialization failed for alloc backend, deferred!
[2010/02/11 12:39:44, 1] nsswitch/idmap_tdb.c:idmap_tdb_alloc_init(397)
idmap uid range missing or invalid
idmap will be unable to map foreign SIDs
[2010/02/11 12:39:44, 0] nsswitch/idmap.c:idmap_alloc_init(750)
ERROR: Initialization failed for alloc backend, deferred!
garyo@orion:/var/log/samba$
garyo@orion:/var/log/samba$ tail -7 0.0.0.0
read_data: read failure for 4 bytes to client 0.0.0.0. Error = Connection reset by peer
[2010/02/11 12:30:12, 0] lib/util_sock.c:read_data(534)
read_data: read failure for 4 bytes to client 0.0.0.0. Error = Connection reset by peer
[2010/02/11 12:39:43, 0] lib/util_sock.c:read_data(534)
read_data: read failure for 4 bytes to client 0.0.0.0. Error = Connection reset by peer
[2010/02/11 12:39:44, 0] lib/util_sock.c:read_data(534)
read_data: read failure for 4 bytes to client 0.0.0.0. Error = Connection reset by peer
garyo@orion:/var/log/samba$
garyo@orion:/var/log/samba$ tail -13 picasso
[2010/02/11 12:30:13, 0] passdb/pdb_interface.c:pdb_default_create_user(329)
_samr_create_user: Running the command `/usr/sbin/smbldap-useradd -w "picasso$"' gave 127
[2010/02/11 12:39:43, 0] auth/auth_util.c:create_builtin_administrators(792)
create_builtin_administrators: Failed to create Administrators
[2010/02/11 12:39:43, 0] auth/auth_util.c:create_builtin_users(758)
create_builtin_users: Failed to create Users
[2010/02/11 12:39:44, 0] auth/auth_util.c:create_builtin_administrators(792)
create_builtin_administrators: Failed to create Administrators
[2010/02/11 12:39:44, 0] auth/auth_util.c:create_builtin_users(758)
create_builtin_users: Failed to create Users
Error: modifications require authentication at /usr/share/perl5/smbldap_tools.pm line 1083.
[2010/02/11 12:39:45, 0] passdb/pdb_interface.c:pdb_default_create_user(329)
_samr_create_user: Running the command `/usr/sbin/smbldap-useradd -w "picasso$"' gave 127
garyo@orion:/var/log/samba$
“The following error occurred attempting to join the domain “xxx”: the user name could not be found.”
I have tried this with my administrator username and password. Also using a second admin account created just for this problem resulted in the same result.
The following log file entries show what is going on when this is happening. If there are others that might lead to the solution please let me know. I would appreciate any suggestions at this time it’s getting a little frustrating.
garyo@orion:/var/log/samba$ tail -10 smbd
[2010/02/11 12:30:12, 0] lib/util_sock.c:get_peer_addr(1224)
getpeername failed. Error was Transport endpoint is not connected
[2010/02/11 12:39:43, 0] lib/util_sock.c:get_peer_addr(1224)
getpeername failed. Error was Transport endpoint is not connected
[2010/02/11 12:39:43, 0] lib/util_sock.c:get_peer_addr(1224)
getpeername failed. Error was Transport endpoint is not connected
[2010/02/11 12:39:44, 0] lib/util_sock.c:get_peer_addr(1224)
getpeername failed. Error was Transport endpoint is not connected
[2010/02/11 12:39:44, 0] lib/util_sock.c:get_peer_addr(1224)
getpeername failed. Error was Transport endpoint is not connected
garyo@orion:/var/log/samba$
garyo@orion:/var/log/samba$ tail -27 log.winbindd-idmap
[2010/02/11 12:39:43, 0] nsswitch/idmap.c:idmap_alloc_init(750)
ERROR: Initialization failed for alloc backend, deferred!
[2010/02/11 12:39:44, 1] passdb/pdb_ldap.c:ldapsam_getgroup(2251)
ldapsam_getgroup: Duplicate entries for filter (&(objectClass=sambaGroupMapping)(gidNumber=544)): count=2
[2010/02/11 12:39:44, 1] nsswitch/idmap_tdb.c:idmap_tdb_alloc_init(397)
idmap uid range missing or invalid
idmap will be unable to map foreign SIDs
[2010/02/11 12:39:44, 0] nsswitch/idmap.c:idmap_alloc_init(750)
ERROR: Initialization failed for alloc backend, deferred!
[2010/02/11 12:39:44, 1] nsswitch/idmap_tdb.c:idmap_tdb_alloc_init(397)
idmap uid range missing or invalid
idmap will be unable to map foreign SIDs
[2010/02/11 12:39:44, 0] nsswitch/idmap.c:idmap_alloc_init(750)
ERROR: Initialization failed for alloc backend, deferred!
garyo@orion:/var/log/samba$
garyo@orion:/var/log/samba$ tail -7 0.0.0.0
read_data: read failure for 4 bytes to client 0.0.0.0. Error = Connection reset by peer
[2010/02/11 12:30:12, 0] lib/util_sock.c:read_data(534)
read_data: read failure for 4 bytes to client 0.0.0.0. Error = Connection reset by peer
[2010/02/11 12:39:43, 0] lib/util_sock.c:read_data(534)
read_data: read failure for 4 bytes to client 0.0.0.0. Error = Connection reset by peer
[2010/02/11 12:39:44, 0] lib/util_sock.c:read_data(534)
read_data: read failure for 4 bytes to client 0.0.0.0. Error = Connection reset by peer
garyo@orion:/var/log/samba$
garyo@orion:/var/log/samba$ tail -13 picasso
[2010/02/11 12:30:13, 0] passdb/pdb_interface.c:pdb_default_create_user(329)
_samr_create_user: Running the command `/usr/sbin/smbldap-useradd -w "picasso$"' gave 127
[2010/02/11 12:39:43, 0] auth/auth_util.c:create_builtin_administrators(792)
create_builtin_administrators: Failed to create Administrators
[2010/02/11 12:39:43, 0] auth/auth_util.c:create_builtin_users(758)
create_builtin_users: Failed to create Users
[2010/02/11 12:39:44, 0] auth/auth_util.c:create_builtin_administrators(792)
create_builtin_administrators: Failed to create Administrators
[2010/02/11 12:39:44, 0] auth/auth_util.c:create_builtin_users(758)
create_builtin_users: Failed to create Users
Error: modifications require authentication at /usr/share/perl5/smbldap_tools.pm line 1083.
[2010/02/11 12:39:45, 0] passdb/pdb_interface.c:pdb_default_create_user(329)
_samr_create_user: Running the command `/usr/sbin/smbldap-useradd -w "picasso$"' gave 127
garyo@orion:/var/log/samba$
Pages: [1]